Lionda Technology Co 2251LD02 FRS/GMRS User Manual 2251MANFILM

Lionda Technology Co Ltd FRS/GMRS 2251MANFILM

revised users manual

2Changing CHANNELSMONITORMENU/LOCKBatterySending Call Tones.......................................................... 12................................................... ...................... 12............................. 12............................................................. 15Button (FUNCTION EDITING)TRANSMIT POWER SELECTION ModeCHANNEL SCANCharge Level/Low Battery IndicationTo Charge the FRS/GMRS................................... 13................................................................. 14.............................. 14...................................................... 15SPECIFICATIONSCHANNEL TABLE................................................................... 15.................................................................... 16....................................................................... 21TROUBLESHOOTINGWARRANTYLICENSING.............................................................. 17............................................................................ 18.....Removing the Belt ClipInstalling the Belt ClipConnecting the AdapterAccessory Connection........................................................ 8......................................................... 8...................................................... 8........................................................ 8Battery InstallationLCD ScreenTurning the Unit ONTurning the Unit OFFAdjusting Speaker VolumeReceiving a SignalTransmitting a Signal............................................................. 9.................................................................... 10............................................................ 11.......................................................... 11.................................................... 11........................................................... 11.......................................................... 11OPERATIONSPECIAL FEATURESCARE AND SAFETYFCC NOTICE................................................... 3..................................................... 5............................................................... 7GETTING STARTEDContents4Special FeaturesSpecial Features1around buildings or large structures.NOTE: The maximum transmission range will vary depending on terrain andenvironment. Range will be greater in open fields, while range is shorter within andPRODUCT DESCRIPTIONThe FRS/GMRS COMMUNICATOR is the newest generation in personaltwo-way communications. The FRS/GRMS COMMUNICATOR operatesin a licensed-free radio band on the FRS channels 8 -14 (no FCC licenseis needed for its operation), and on licensed FRS/GMRS channels 1 - 7,and GMRS channels 15 - 22 ( see page 22 regarding licensing information).The FRS/GMRS is a lightweight, compact two-way communication devicethat can be used to communicate with family or friends at parks, shoppingmalls, sporting events, concerts - any indoor or outdoor activity!The FRS/GMRS is compatible with other brands utilizing the samefrequency band (operating in the frequency range from 462.5625MHzThe FRS/GMRS has 22-CHANNELS, featuring a multi-functional LCDScreen (which displays the current channel and various status icons).This unit may not ensure privacy of communication.Please read this Owner's Manual carefully to get the most out of your FRS/GMRS .COMMUNICATORBellSouth is committed to providing quality products that fityour needs. We would like to have any comments orsuggestions you might have on this product. You may mailU.S. Electronics105 Madison AvenueNew York, NY 10016your comments to:you with years of trouble-free service.to 462.7250 MHz).Congratulations on your selection of a quality. With proper care and adherence to the set-up anduser instructions in this Owner's Manual, this unit will provideBellSouthProductBELT CLIPMONITOR button - Press to tune in and hold onto weak signals.UP / DN (DOWN) buttons - Used for changing channels,codes, and setting the receive volume.TALK (PUSH TO TALK) button - Used for making a call.CALL button - Press to transmit a CALL Tones.MIC - MicrophoneANTENNALCD (Liquid Crystal Display) Screen - Displays current channelselection and other radio status symbols.BATTERY COMPARTMENT COVER LATCH (Located on therear) - Secures BATTERY COMPARTMENT cover.EAR/MIC jack - This jack is used to connect a 3.5 mm stereoheadset/mic.POWER ON/OFF button POWER- Press and hold the buttonto turn the unit ON or OFF.MENU /LOCK button - Press to shift into FUNCTION editingmode. Press and hold for 5 seconds to lock the buttons.SPEAKERBATTERY COMPARTMENT - Housesfour(4) alkaline or Ni-MH rechargeable batteries (not(Located on the rear)included with the package).SCAN button - Used to activate and deactivate channelscanning.TX LED indicator - Illuminates red when transmitting.LCD SCREEN(Pgs. 4, 10-14, 17)TX LED INDICATOR(Pg. 4, 11, 14)ANTENNA(Pgs. 5-7)DOWN BUTTON(VOLUME/CHANNEL)(Pgs. 4, 11-14, 17)POWER ON/OFFBUTTON(Pgs. 4, 9, 11, 14)MENU BUTTON(Pgs. 4, 10, 12, 13, 17)SCAN BUTTON(Pg. 4, 13, 14)SPEAKER(Pg. 11)MONITORBUTTON(Pgs. 4, 11, 12, 17)UP BUTTON(VOLUME/CHANNEL)(Pgs. 4, 11-14, 17)PTT BUTTON(PUSH TO TALK)(Pgs.4, 7, 11-14)EAR/MIC/CHARGERJACK (Pgs. 8, 14)menuscanmon2251BATTERY COMPARTMENT(LOCATED INSIDE)(Pgs. 4, 6, 9)BELT CLIP(LOCATEDON THE REAR)(Pg. 8)CALL BUTTON(Pg. 4, 12, 14)
Figure 1 Figure 2Getting Started8Removing the BELT CLIPInstalling the BELT CLIPConnecting the Adapter1. Pull the BELT CLIP LATCH away from the unit.2. While pulling the BELT CLIP LATCH, push up on the BELT CLIP toremove it from the unit, as shown in Figure 1.1. Slide the BELT CLIP into the BELT CLIP SLOT as shown in Figure 2.package.)Care and SafetyCare and SafetyNOTE: Areas with potentially explosive atmospheres are often, but not always,clearly marked. They include fueling areas such as below deck on boats; fuel orchemical transfer or storage facilities; areas where the air contains chemicals orparticles, such as grain, dust, or metal powders; and any other area where youwould normally be advised to turn off your vehicle engine.65CAUTIONWARNINGDamaged ANTENNAFor Vehicles with an Air BagPotentially Explosive AtmospheresBatteriesBatteriesBlasting Caps and AreasDo not use any FRS/GMRS that has a damaged ANTENNA. If a damaged ANTENNAcomes in contact with the skin, a minor burn may result.Turn your FRS/GMRS OFF when in any area with a potentially explosive atmosphere,unless it is a type especially qualified for such use (for example, Factory MutualApproved). Sparks in such areas could cause an explosion or fire resulting in injury orDo not replace or charge batteries in a potentially explosive atmosphere. Contactsparking may occur while installing or removing batteries and cause an explosion.even death.Do not place your FRS/GMRS in the area over an air bag or in the air bagdeployment area. Air bags inflate with great force. If a FRS/GMRS is placed in theair bag deployment area and the air bag inflates, the FRS/GMRS may be propelledwith great force and cause serious injury to the occupants of the vehicle.All batteries can cause property damage and/or bodily injury such as burns ifconductive material such as jewelry, keys, or beaded chains touches exposedterminals. The material may complete an electrical circuit (short circuit) andbecome quite hot. Exercise care in handling any charged battery, particularlywhen placing it inside a pocket, purse, or other container with metal objects.Care and SafetyTo clean the unit, wipe with a soft cloth dampened with water. Don't usecleaners or solvents on the unit; they can harm the case and leak inside,causing permanent damage. Battery contacts may be wiped with a dry, lint-free cloth.Exposure to Radio Frequency EnergyThe Relevant Guidelines and Standards Are:For Portable Two-Way FRSGMRS/Electromagnetic Interference/CompatibilityTo ensure optimal unit performance and to ensure that exposure to RFenergy is within the guidelines in the above standards, the followingoperating procedures should be observed:Nearly every electronic device is susceptible to electromagnetic interference (EMI)if inadequately shielded, designed, or otherwise configured for electromagneticcompatibility.Turn your unit OFF in any facilities where posted notices instruct you to do so.Hospitals or health care facilities may be using equipment that is sensitive toTurn your unit OFF when on board an aircraft when instructed to do so. Any useof the unit must be in accordance with airline regulations or crew instructions.external RF energy.If the unit gets wet, turn it OFF and remove the batteries immediately. Drythe BATTERY COMPARTMENT with a soft cloth to minimize potential waterdamage. Leave cover off the BATTERY COMPARTMENT overnight or untilcompletely dry. Do not use the unit until completely dry.When transmitting with a FRS/GMRS, hold the FRS/GMRS in a vertical position withits MICROPHONE 1 to 2 inches (2.5 to 5.0 cm) away from your mouth. Keep theANTENNA at least 2 inch (5 cm) from your head and body.If you wear a FRS/GMRS on your body, ensure that the ANTENNA is at leasttwo inch (5 cm) from your body when transmitting.FCC Report and Order FCC 96-326 (August, 1996)American National Standards Institute (C95-1-1992)National Council Radiation Protection and Measurements (NCRP-1986)FCC Notice7The FCC requires that you be advised of certain requirements involving theuse of this device. This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmfulinterference in residential installation. This device uses and can generateradio frequency energy. If not installed and used in accordance with theinstructions, it may cause harmful interference to radio communications.However, there is no guarantee that the interference will not occur in aparticular installation. If this equipment does cause harmful interference toradio or television reception (which can be determined by turning theequipment off and on), the user is encouraged to correct the interference byone or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment to an outlet on a circuit different from that to whichthe receiver is connected.Consult the dealer or an experienced radio/TV technician for help.This equipment generates or uses radio frequency energy.Changes or modifications not expressly approved in writing may causeharmful interference and void the user's authority to operate this equipment.FCC WARNING:FCC INFORMATION: This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may notcause harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation. Privacyof communications may not be ensured when using this equipment.Your wireless hand-held portable transceiver contains a low power transmitter. When theTALK button is pushed it sends out radio frequency (RF) signals. The devise isauthorized to operate at a duty factor not to exceed 50%. In August 1996, the FederalCommunications Commissions (FCC) adopted RF exposure guidelines with safety levelsfor hand-held wireless devices.Use only the supplied . Unauthorized ANTENNAS, modifications, orattachments could damage the transmitter and may violate FCC regulations.ANTENNATo maintain compliance with the FCC's RF exposure guidelineshold the transmitter and ANTENNA at least 2 inch (5 cm) from your face andspeak in a normal voice, with the pointed up and away from the face. Ifyou wear the handset on your body while using the headset accessory, useonly the supplied BELT CLIP for this product and when transmitting, take it outof the belt to ensure that the is at least 2 inch (5 cm) from your body.CAUTION:ANTENNAANTENNASAFETY INFORMATION:Carefully remove your FRS/GMRS from the Blister Pack. If there is any visibledamage, do not attempt to operate this FRS/GMRS. Return it to the place ofpurchase.Accessory ConnectionThe FRS/GMRS is designed to be used with accessories (Earphone,Microphone, etc.).The design of your FRS/GMRS, which generates radio frequency (RF) electro-magnetic energy (EME), complies with the following national and internationalstandards and guidelines.International Commission on Non-Ionizing Radiation Protection (ICNIRP-1998)
109LCD ScreenBATTERY INSTALLATIONFigure 3 Figure 4Getting Started Getting StartedGetting Started Operation11 1212Changing CHANNELSWARNINGDO NOT CHARGE THIS UNIT USING AN AC/DC ADAPTER WITH REGULARD.SCAN - Displayed during the CHANNEL SCAN mode.C.- Displays the current volume level.E. BUSY - Displays during the TALK mode.G.-Displays the current BATTERY LEVEL charge.F. - Displays when the LOCK mode is activated .DH. - CHANNEL NUMBER. Changes from 1 to 22 as selected14by user.Adjusting Speaker VolumeTransmitting a SignalWhile holding the button, speak into the unit using a normal toneof voice.TALKRelease the button when you have finished transmitting.TALKCheck the channel activity by pressing and holding thebutton. You'll hear static if the channel is unoccupied. Don'tTRANSMIT if someone is talking on the channel. Press and hold thebutton to TRANSMIT. The TX icon is displayed. Hold the unitin a vertical position with the MICROPHONE 2 to 3 inches (5 to 7.5)MONITORTALKfrom the mouth.1.2.3.Changing CHANNELSThe FRS/GMRS has 22 available channels. To change channels:Press the button to move to a higher channel.Press the button to move to a lower channel.The channel changes from 1 to 22, or from 22 to 1.UPDNMONITORPress the button for normal monitoring.MONITORYou can use the button feature to check for weaker signals in the currentchannel.MONITOR1.2.MENU/LOCK Button (FUNCTION EDITING)Press and hold the button for 5 seconds to activate or deactivate theBUTTON LOCK mode. The BUTTON LOCK icon is displayed on the LCD Screen.MENUDepress the button momentarily;MENUPress the button briefly to enter into the FUNCTION EDIT modes in dueorder: mode.HI/LOWNOTE: In the current FUNCTION EDIT mode, press the button to returnto the NORMAL mode after making your selection. In the FUNCTION EDIT mode,press the button again to shift from the current option in each submenuTALKMENUto the next option.NOTE: Channel Change Operations are disabled during BUTTON LOCKmode. Press and hold the button again to deactivate BUTTON LOCKMENUmode.AAAAAAAAAAAAABCEFGHIReceiving a SignalThe unit is continuously in the RECEIVE mode when the unit is ONand not transmitting. When you receive a signal on the currentchannel, the RX icon is displayed. (See “LCD Screen” for details.)Press the button to increase the volume.UPPress the button to decrease the volume.DNThe speaker volume level is indicated by the number of bars displayedin the upper right corner of the LCD.Press and hold the button until it “beeps” for continuousmonitoring.MONITORTurning the Unit ONTurning the Unit On/OffPress and hold the button. The unit will “beep” and the LCDScreen will turn blank.POWERPress and hold the button. The unit will “beep” and thePOWER LCDScreen will display then the current channel.2r5The FRS/GMRS has a built in POWER SAVER feature for maximum batterylife. But when the FRS/GMRS is not being used, conserve battery power bypressing the button to OFF. Remove the batteries if the unit will notPOWERbe used for a long period of time.Press and release the button, the current channel numberflashes on the LCD Screen.MENUWhile the channel number is flashing:1.2.4. Reinstall the BATTERY COMPARTMENT COVER and return the BELT2. Remove the BATTERY COMPARTMENT COVER from the BATTERYCOMPARTMENT. See Figure 3.(batteries not included) following the polarities as shown in Figure 4.3.NOTE: In order for other people to receive your transmission, they must also be onthe same channel you are currently using. Refer to the sectionfor more information.
13OperationVOX Selection1. Press the button twice, the VX icon will flash on the LCDMENUScreen.2. Press the button to turn the VOX feature ON, or press theUP DNbutton to turn the VOX feature OFF.3. In the VOX mode, the VX icon will be displayed.4. To confirm your selection and return to the NORMAL mode, pressthe button.TALK5. To confirm and shift to the next option, press the button.MENUThe FRS/GMRS is capable of voice activated (VOX) transmission. In VOXmode, the radio will transmit a signal only when it is activated by yourvoice or other sound around you. VOX operation is not recommended ifyou plan to use your radio in a noisy or windy environment.NOTE: To save power, the unit will not turn ON the LCD Screen light when inthe VOX mode.15Operation14OperationChannel Table1622 ChannelsFRS / GMRS (0.28W)About 5 Miles (GMRS) / 2 Miles (FRS)Channels AvailableOutput Power (TX)RangeSending Call TonesSpecificationsYou can use Call Tones to alert the other user to identify yourself. You canalso use Call Tones to signal the beginning or the end of a transmission.1. Press and release the button.CALL2. Your Call Tones will transmit to nearby receivers set to the samechannel.NOTE: This FRS/GMRS unit allows you to communicate with standard FRS modelsby using channels 1 through 14.CHANNEL SCANCHANNEL SCAN performs searches for active signals in an endlessloop from 1 to 22.Press and release the button to activate CHANNEL SCAN. The.channel number on the LCDSCANScreen changes rapidly until an active signalis detected.2. When an active signal (one of 22 channels) is detected, CHANNEL SCANpauses keeping the active signal broadcasted.3. Press the button to communicate through the active signal channeland CHANNEL SCAN is deactivated.TALK5. Press the button to deactivate CHANNEL SCAN mode.MENU4. When an active signal (one of 22 channels) is detected, but anotherchannel is desired, press the or button to bypass the currentUP DNthe current channel and continue to search for another active channel.1.Battery Charge Level/Low Battery IndicationThe BATTERY CHARGE LEVEL is indicated by the number of squarespresent inside the BATTERY icon on the LCD Screen.When the BATTERY CHARGE LEVEL is low, the BATTERY icon willflash to indicate that the batteries need to be replaced.To use this FRS/GMRS with an AC/DC ADAPTER (not included) andrechargeable BATTERY PACK (not included) do the following:To Charge the FRS/GMRSPlug the 7.5 V DC / 200 mA ADAPTER (not included) into the EAR/MIC/CHARGER JACK on the top of the FRS/GMRS and turn it ON bypressing the button.POWERNOTE: The FRS/GMRS cannot transmit calls while the BATTERY PACKis being charged. It takes approximately 4 to 5 hours to fully charge the batteriesif they are at their lowest level.Channel TableChannel Conversion ChartPOWER(Watts)POWER(Watts)FREQUENCY(MHz)15467.6625467.6875467.712516171819202122CHANNELNUMBERUse the following channel conversion chart to communicate onthe same frequency with other GMRS and FRS/GMRS modelsCHANNELNUMBER12345678910111213140.28FREQUENCY(MHz)467.5625467.5875467.6125467.6375462.5625462.5875462.6125462.6375462.6625462.6875462.7125NOTE: Channels 1 to 14 are 15 through 22 areshared with the FRS radio channels.NOTE: For your convenience it is suggested that you use Channels 1 thru 14.Operation of this model on GMRS frequencies (Channels 15 thru 22) requires alicense from the Federal Communications Commission (FCC).*All 15 Channel GMRS units including BellSouth use the same channels.exclusivelyfor GMRS radios. The maximum transmission range will varydepending on terrain and environment.462.5750462.6250462.6750462.5500462.6000462.6500462.7000Channels 1-7 Channels 1-7 Channels 1-7Channels 8-14 Channels 8-14 NAChannel 15 Channel 16 Channel 8BellSouth22 Channel ModelsOther Brands22 Channel ModelsAll Brands*15 Channel Models462.7250Channel 16 Channel 18 Channel 9Channel 17 Channel 20 Channel 10Channel 18 Channel 15 Channel 11Channel 19 Channel 17 Channel 12Channel 20 Channel 19 Channel 13Channel 21 Channel 21 Channel 14Channel 22 Channel 22 Channel 150.280.280.280.280.280.280.280.280.280.280.280.280.280.280.280.280.280.280.280.280.28
19Warranty18WarrantySYMPTOM SOLUTIONNo power.The may be weak.batteriesCheck batteries. Ensure that the batteries are installed properly.Receptionis weak. The receiving signal may be weak and/or out of range.If this happens press the button.MONITORRange islimited.Wearing the radio close to the body, such as in a pocket or ona belt, will decrease range; change the location of the radio.may limit the range significantly.Open fields provide the maximum range, while steel/concretestructures, heavy foliage, and use in buildings and in vehiclesThe maximum range will vary depending on terrain and environment.Replace with new if the BATTERY CHARGE LEVELindicator is low.batteriesBatteries may be weak.Sound distortionproblems.Radios too far apart. Obstacles interfere with transmission.Talk range is from 2 - 5 miles in clear unobstructed conditions.Radios too close. Radios must be at least 5 feet apart; increaseyour distance.If you are transmitting, speak in a normal tone of voice, 2 to 3inches away from the MICROPHONE.If you are receiving, lower the VOLUME to a comfortable level.Warranty20address of the authorized service center is:During the first thirty (30) days, a defective product is eligible for over-the-counterexchange at the retailer from whom it was purchased. After thirty (30) days, thedefective product should be returned to the authorized service center. The shippingWhat To Do for Warranty ServiceYour unit will be repaired or replaced if examination by the service centerdetermines the unit is defective.An FRS/GMRS unit received damaged as a result of shipping willto file a claim with the carrier to cover repair costs.requireyouAn FRS/GMRS unit received with missing parts or with damage due toabuse, inadequate packing, or some other noncompliance with this limitedTroubleshooting17warranty will be returned to you C.O.D., freight collect.Warranty Service ProvidedWarranty InformationThis warranty gives you specific legal rights and you may have other rights whichvary from state to state. Some states do not allow the exclusion or limitations ofspecial, incidental or consequential damages or limitations on how long a warrantylasts, so the above exclusion or limitation may not apply to you.disclaims any implied warranty, including the warranty ofmerchantability and the warranty of fitness for a particular purpose, as of the date ofone year from your original purchase of the FRS/GMRS unit.assumes no responsibility for any special, incidental, or consequential damages.BellSouth ProductsBellSouth ProductsIf you purchased the FRS/GMRS unit new from a retail vendor,warrants the unit against defects in material and workmanship for aperiod of one (1) year from the original date of purchase. This warranty is in lieuof all other expressed warranties. This warranty begins when you purchase theFRS/GMRS unit and continues for (1) one year unless you sell or rent the unit, inBellSouthProductswhich case the warranty stops.This limited warranty sets forth all responsibilities regardingyour FRS/GMRS. There are no other expressed or implied warranties fromBellSouth ProductsBellSouth Products.BellSouth ProductsOne-Year Limited WarrantyThis warranty does not cover damage resulting from accident, misuse, abuse,improper installation or operation, lack of reasonable care, unauthorizedmodification, or the affixing of any attachment not provided bywith the FRS/GMRS unit, and/or loss of parts. This warranty is voided in the eventany unauthorized person opens, alters, or repairs the unit. All equipmentbeing returned for repair must be suitably packaged. doesnot warrant that this equipment is compatible with the type of accessory of anyBellSouth ProductsBellSouthBellSouth Productsparticular communicator company or the services provided by it.Warranty Service Not Providedreturned to you C.O.D., freight collect.will beNOTE: An FRS/GMRS unit received which was not made for orwhich is not defective as determined by our test procedures will not be repaired andBellSouth ProductsUS Electronics CONSUMER CENTERC/O Southern Bonded Warehouse7137 Southlake ParkwayMorrow, GA 30260To Obtain Warranty ServiceProvide proof of the date of purchase within the package.Prepay all shipping costs to the authorized service center.Include a return shipping address within the package.for the FRS/GMRS unit should you have to return it.Please retain your sales receipt, the carton, the packing materials, andthe printed material. The original carton is the best shipping containerFor your reference:Model NumberDate of PurchaseName of DealerPress the button to increase VOLUME.UPCustomer Service Telephone Number:1-800-864-2199Visit Us on the Web:www.uselectronics.info
menuscanmon2251COMMUNICATORMODEL 2251OWNER'S MANUALINSTALLATION ANDOPERATING INSTRUCTIONSLicensingFOR INFORMATION, PLEASE SEEINSTALLATIONSEPARATE QUICK START GUIDE.2002 BellSouth CorporationVisit Us on the Web:www.uselectronics.infoPLEASE READ THISOWNER'S MANUALCAREFULLY BEFOREUSE. KEEP FORYOUR REFERENCE.LicensingFCC Licensing InformationCommission (FCC).Information regarding an application for your license can beobtained as follows:Website - http://wireless.fcc.gov/prs/genmbl.htmlTelephone Number: 1-800-418-3676This FRS/GMRS Radio operates on frequenciesthat require a license from the Federal CommunicationsBellSouthMake certain you receive the bestperformance from your FRS/GMRS.Read this Owner's Manual first.STOP2251 Made in ChinaLDVisit Us on the Webwww.uselectronics.info21Licensing InformationThe FRS/GMRS COMMUNICATOR is the newest generation in personaltwo-way communications. The FRS/GMRS COMMUNICATOR operateson licensed FRS/GMRS channels 1 - 7, and GMRS channels 15 - 22 (seebelow regarding licensing information), and in a license-free radio bandon the FRS channels 8 - 14 (no FCC license is needed for its operation).Channels 1 thru 7 transmit on FRS/GMRS frequencies.Channels 15 thru 22 transmit on GMRS frequencies.Operation on FRS/GMRS and GMRS frequencies require a Licensefrom the Federal Communications Commission (FCC).Information regarding an application for your license can be obtained asfollows if you intend to use the GMRS channels:Website - http://wireless.fcc.gov/prs/genmbl.htmlTel. 1 - 800 - 418 - 3676http://wireless.fcc.gov/csinfo/feeinfo.html.Application for a GMRS system license is made on FCC Form 605 andyou can obtain a copy from the Web site:or by calling the Form Distribution Center, or from the fax-on-demand by dialinghttp://www.fccgov/formpage.html1 - 800 - 418 - FORM (3676).(202) 418 - 0177Before any station transmit on any channel authorized in the GMRS fromany point within or over the territorial limits of any area where radioservices are regulated by the FCC, the responsible party must obtain alicense for a GMRS system. An individual 18 years of age or older, whois not a representative of a foreign government, is eligible to apply for aGMRS system license.GMRS Licensing InformationFCC Licensing InformationChannels 8 thru 14 transmit on FRS frequencies.Notes22
Quick StartFigure 1 Figure 2Quick StartModel 2251See the Owner's Manual for full details.WARNINGDO NOT CHARGE THIS UNIT USING AN AC/DC ADAPTER WITH REGULARBATTERY INSTALLATIONAAAAAAAAAAAAThe FRS/GMRS has a built in POWER SAVER feature for maximum batterylife. But when the FRS/GMRS is not being used, conserve battery power bypressing the button to OFF. Remove the batteries if the unit will notPOWERbe used for a long period of time.4. Reinstall the BATTERY COMPARTMENT COVER and return the BELT2. Remove the BATTERY COMPARTMENT COVER from the BATTERYCOMPARTMENT. See Figure 3.(batteries not included) following the polarities as shown in Figure 4.3.AAAAAAAAAAAAAdjusting Speaker VolumeTransmitting a SignalWhile holding the button, speak into the unit using a normal toneof voice.TALKRelease the button when you have finished transmitting.TALKCheck the channel activity by pressing and holding thebutton. You'll hear static if the channel is unoccupied. Don'tTRANSMIT if someone is talking on the channel. Press and hold thebutton to TRANSMIT. The icon is displayed. Hold the unitin a vertical position with the MICROPHONE 2 to 3 inches (5 to 7.5)MONITORTALKfrom the mouth.1.2.3.Receiving a SignalThe unit is continuously in the RECEIVE mode when the unit is ONand not transmitting. When you receive a signal on the currentchannel, the icon is displayed. (See “LCD Screen” for details.)Press the button to increase the volume.UPPress the button to decrease the volume.DNThe speaker volume level is indicated by the number of bars displayedin the upper right corner of the LCD.Turning the Unit ONTurning the Power On/OffPress and hold the button. The unit will “beep” and the LCDScreen will turn blank.POWERPress and hold the button. The unit will “beep” and thePOWER LCDScreen will display then the current channel.2r5NOTE: In order for other people to receive your transmission, they must also be onthe same channel you are currently using. Refer to the sectionfor more information.Modelo 2251FIGURA 1 FIGURA 23.1.1.2.3.Presione y mantenga presionado el botón . Se oirá un sonida"bip" y la PANTALLA LCD mostrará y el canal actual.POWERPresione y mantenga presionado el botón . Se oirá un sonida"bip" y la PANTALLA LCD quedará en blanco.POWERpresionado el botón para TRANSMITIR. EL INDICADORMONITORMientras mantiene presionado el botón hacia la unidad conun tono normal de voz.TALK.TALK

Navigation menu