Lionda Technology Co GH9402NH 900 MHz & 2.4 GHz 50 Channel Cordless Phone User Manual Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	169799
Application ID	Be7vaM78J/2OUYmCoOhMkg==
Document Description	Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	33.96kB (424527 bits)
Date Submitted	2001-09-15 00:00:00
Date Available	2001-09-12 00:00:00
Creation Date	2000-09-05 16:06:43
Producing Software	Acrobat 3.0 Scan Plug-in
Document Lastmod	2000-09-05 16:06:57
Document Title	Manual 2
Document Creator	Acrobat 3.0 Scan Plug-in

| l
—| LEX-HASIC p65
zusmo, 217 m
FF
BASE UNIT Controls
I |
—| LEX~BASIC yes 7 2/i5100,2.17 PM |_
1. TELEPHONE LINE CONNECTION JACK
2. POWER-IN CONNECTION JACK
3. TONEIPULSE Solect Switch
4. PAGE - unon: Press In page the HANDSE‘I’. Press again to stop
5, ANYENNA. Raise or reposition for me best reception.
s. m USE/CHARGE LED Indlcaton Lights up when the mucosa is in TALK mode or
when the HANDSET is placed on me BASE UNIT for charging
7. CHARGE TERMINALS: FM charging the BATTERY PACK inside the HANDSET.
We recommend cleanii’ig the CHARGE TERMINALS periodicallywilh a dampclom.
IMPORTANT
Locating yourBASEUNIT nearappliances such
as televisions. rcfrlgeramrs, radios. or
microwzvcovens may cause inteflcrence.
| |
1 Getting Started
Connecting Your Phone
This section is a reference guide to the basic functlons and operations ol your cordless
telephone For more detailed descriptions Mme operations and features Mlhis telephone,
refer to the Contents on page 1.
1. Carelully remove your cordless telephone lrom its shipping carton. II more Is any
visible damage, do not attempt to operate Ihis equipmenl.‘Retum it tome place of
purchase. , '
2. Check to be sure you have all items that come with this cordless telephone system.
You should have a HANDSET, BASE UNIT, AC ADAPTOR, MOUNTING BRACKET,
TELEPHONE LINE CORD, SHORT TELEPHONE LINE CORD and OWNER'S
MANUAL
HANDSE T BASE LIN/T MOUNflNG BRACKET BELT CLIP
(E2 \L g t
g SHORT TELEPHONE
TELEPHONE LlNE CORD L/NE CORD ACADAFTDR
3. Insert the small plug on the end of the AC ADAPTOR into the POWER-IN
CONNECTION JACK at me back ofthe BASE UNIT.
4. Plug the AC ADAPTOR into a 120V AC wall outlet.
USE ONLY WITH CLASS 2 POWER SOURCE SV DC, MflmA.
E Insert one plug ofthe TELEPHONE LINE CORD into the house TELEPHONE JACK
and the other end into the TELEPHONE LINE CONNECTION JACK on the back 0!
(he BASE UNIT. (If you have an older 41)an TELEPHONE JACK. you will need an
RJ-11C TELEPHONE JACK ADAPTOR. This adaptor is available at the same place
you purchased your telephone.)
Raise or reposition the ANTENNA on the BASE UNIT (or the best reception,
We recommend not placing this unit next to appliances. Doing so may cause
inteflerence.
2h ' LEx-BASICPBS u ans/no. tam
7'5"
HI:
Getting Started
10.
11.
I |
BASE UNIT
SWITCH
AC ADAPTOR
lnstall the HANDSET BATTERY PACK
by plugging it lnlo the BATTERY
CONNECTOR lnstde the BATTERY
COMPARTMENT
Place the BATTERY PACK inslde lhe
BATI'ERY COMPARTMENT.
Slide the HANDSET BATTERY
COMPARTMENT COVER flrmly tnto
place In tts closed posttton
TONE/PULSE select Swttch:
A. "your home ls equtpped wtth atone
dialing system set the TONE/PULSE
Select Swttch to the TONE pcsmcn.
E I! you have a rotary dialing system.
set the TONE/PULSE select Swttch
tothe PULSE posttton
c. If you are unsure whlch system you
have, set the TONE/PULSE Select
Switch to the TONE position. Press
the @ bullon on (he HANDSET
lo get a dial lane, and press any
button on the TELEPHONE KEYPAD
except the zero. If the dial tone
continues it means that you do not
have tone dlallng Service. Press the
button on the HANDSErto hang
up. Set the TONE/PULSE Select
Switch to me PULSE mode and then
try agatn
—| LEX~BASleS5 9
TONE/PULSE
TELEPHONE LINE CORD
TELEPHONE LINE
CONNECT lON
JACK
TELEPHONE
CONNECTOR
z/tsmo. 3:55 PM
you have a dial tone, If you do not get a
dial (one‘ review/steps 3mrough11. "you
still do not have 3 mal (one, reler to the
Problem Solving section on page 20.
thh me back 01mg HANDSET facing Up,
insert one side of the BELT CLIP HOOK
intothe matching slotalmatnp sldeoflhe
HANDSET HANDSET. Press down on the opposite
side oflhe BELT CLIP until the other hook
looks into the slot on the side 0! the
HANDSET.
12. Before Inlual use, chargo the HANDSET for 12 hours.
3—1 LEX~BASIC 965
You are now ready to use your new
BeIISouth Cordless Telephone.
1»
2115100117 m I’—
Desk Mounting
Desk Mounting
One ol the special features of your equipment is the unlque design of the MOUNTING
BRACKET which can hold your phone at an angle of 30° when desk mounting.
There are twoposilions to choose lrorn:
1. NORMAL POSITION (MOUNTING BRACKET not required):
For normal position, as shown in Figure 1, place the BASE UNIT on any desired
hul suimble location.
FIGURE 1
2. 30° POSITION (See Figure 2):
With the back of Ills BASE UNIT lacing up. insert the hooks of the MOUNTING
BRACKET (following the arrow direction lot the DESK MOUNT) into the matching
slots of the BASE UNIT (as shown in Figure 3). Then slide the
MOUNTING BRACKET into place as indicated by the arrow,
FIGURE 2 FIGURE 3
__l lEx-BASIC.pSS n znsm 220 PM r’:
' Wall Mounting
Wall Mounting
You may choose to put the BASE UNIT of your cordless lelephoneon a wall.
1. vwm the back of me BASE UNIT facing up, connect the SHORT TELEPHONE LINE
CORD (0 the TELEPHONE LINE CONNECTION JACK.
2. Feed the SHORT TELEPHONE LINE CORD into me groove on the bed< arms BASE
UNIT (hen lnsen the free end olthe SHORT TELEPHONE LINE CORD through the
hole of the MOUNTING BRACKET.
3. Insert the hooks of the MOUNTING BRACKET into the matching slots on the back
OI the BASE UNIT (as shown below), Then slide the MOUNTING BRACKET until it
lacks into place Plug the lree end ofme SHORTTELEPHONE LINE CORD into the
MODULAR WALL JACK.
l. Align the upper keyhole olthe MOUNTING BRACKET with Ifls upper stud of the wall
plate, so Ina! the openmg end of the MOUNTING BRACKET matches the lower stud,
then pull Ihe BASE UNIT down until it is securely sealed.
TELEPHONE
LINE JACK
SHORT
TELEPHONE _‘
LINE CORD
MOUNTING
BRACKET
WALL PLATE ‘
STUD
WALL PLATE
2L, LEx~aAS|c p65 u 2115100417 PM |——
Basic Operation
Preparing for Use
Before you can use your cordless (elephone, you must charge me HANDsEl’for 12 hours.
Failure to do so will require recharging OHhe BATTERY PACK more oflen,
1. Place the HANDSET on (he EASE UNI’T for 12 houlS.
2. After 12 hours. remove the HANDSET from [he BASE UNIT.
3. Ralse or reposition the BASE UNIT ANTENNA forth. bis! rmptllm.
Before you can use your cordless telephone, you must charge lire HANDSET
for 12 hours, Failure to do so will require more frequent charging of (In
BATTERYFACK. See page 18 for more information on (he BATTERYPACK
NOTE:
Depending on the frequency of use‘ once the HANDSET Is fully charged, it remains
iunclronal for approximately 4 hours of ocnunuous use and approximately 5 days when the
HANDSET is olfrhe BASE UNIT in STANDBY mode.
IMPORTANT
The Ac ADAPTOR must always be pluggnd
into an elecuicaloutlet
—| Lex~nsrc pss w 215m. 2:20 m I—F
' a ‘ Receiving Calls
. n’i.
Receiving Calls with the HANDSET on the BASE UNIT
1. When the phone rings‘ lift the HANDSEI’.
The IN USE LED indicator wlIl Iigm up.
NOTE: The HANDSET RINGER ON/OFF
OFF swltch must be in the 'RINGER ON'
Position for n’nger Io operate
2. Start your conversation.
3. To end our conversation. either press
the buiIon or place Ihe HANDSET
on me BASE UNIT. I! you place (he
HANDSET on the BASE UNIT charge
cradle. you activate the aulomallc
STANDBY feature
Receiving Calls with the HANDSET of! the BASE UNIT
1i When lhe phone rings, press the bunon. The IN use LED indimlor will
Iighi up
2. Start your oonversanonv
3. To end your conversation, either press lhe- button or place the HANDSET on
Ihe BASE UNIT 14 you place Ihe HANDSET on me use umr charge cradle. you
acilvake me aulomanc STANDBY iealure
NOTE: The BASE UNIT has no finger and does not ring Mien receiving an incoming
call.
NOTE:
Ii you are too Var away from Ihe BASE UNIT, the HANDSET emiis 'beep' sounds In warn
you that the background noise level IS too high ior proper communication between the
HANDSET and Ihe BASE uun When you hear Ihis sound‘ you sinitd move doserto me
BASE UNIT to reduce lne nDlse level Otherwise, the call will automatically cut off,
_| lEX~BASIC.v€5 14 mm, 2:2» PM
Ft:

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 2000:09:05 16:06:57
Creator                         : Acrobat 3.0 Scan Plug-in
Producer                        : Acrobat 3.0 Scan Plug-in
Create Date                     : 2000:09:05 16:06:43
Page Count                      : 9

EXIF Metadata provided by EXIF.tools