Lionda Technology Co XG2400ALD03 2.4 GHz 50 Ch Analog Cordless Telephone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	308529
Application ID	491SQ5N+l245OSFIxeQVNQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	43.14kB (539218 bits)
Date Submitted	2003-03-10 00:00:00
Date Available	2003-03-10 00:00:00
Creation Date	2003-02-26 10:59:18
Producing Software	Acrobat PDFWriter 4.0 for Windows
Document Lastmod	0000-00-00 00:00:00
Document Title	Users Manual
Document Creator	C:\UNZIPPED\XG2400~1\XG2400.p65
Document Author:	marvin

2.4 GHz CORDLESS ALL DIGITAL
ANSWERING SYSTEM WITH
CALLER ID/CALL WAITING
50 CHANNEL AUTOSCAN WITH 4 INDIVIDUAL MAILBOXES
Model XG2400
OWNER'S MANUAL
INSTALLATION AND
OPERATING
INSTRUCTIONS
PLEASE READ THIS
MANUAL CAREFULLY
BEFORE USE.
KEEP FOR YOUR
REFERENCE.
on page 7 or your separate
Quick Start guide.
Visit Us on the Web:
www.uselectronics.info
Special Features
ongratulations on your selection of a quality XACT Product. With proper
care and adherence to the setup and user instructions in this Owner’s Manual,
this unit will provide you with years of trouble free service.
BellSouth is committed to providing quality products that fit your needs. We would like to
have any comments or suggestions you might have on this product. You may mail your
comments to:
U.S. Electronics
105 Madison Avenue
New York, NY 10016
When examining your new XACT cordless telephone, you will find an array of
special features including:
Filtered Sound™ System - Receives considerably less noise than conventional cordless
telephones because of a special circuit which delivers the clearest possible
reception.
50 Channel Autoscan - Press the DEL/CHAN button on the HANDSET to find and lock on
to the clearest channel for any call.
Desk or Wall Mount - Use this equipment as a desk phone or as a wall phone.
TONE or PULSE Dialing - Use this phone for either TONE (push-button) or PULSE
(rotary) dialing.
Automated Functions - Redial the last number called and automatic STANDBY mode.
Security - Ensures greater privacy because a built-in security code with 65,536
combinations prevents use of your telephone line by another nearby cordless
telephone.
Dependable Battery - Recharge your BATTERY PACK many times with the built-in
charger. The battery low warning tone tells you when the BATTERY PACK needs
recharging (See page 37).
Special Services - Use the EDIT/FLASH button to access special services such as Call
Waiting supplied by your telephone company or company switchboard.
STANDBY Mode - When in STANDBY mode (ON-HOOK), the telephone is capable of
receiving a call. When the HANDSET is on the BASE UNIT, it is automatically in the
STANDBY mode (ON-HOOK). When the HANDSET is taken off the BASE UNIT, it
remains in the STANDBY mode until you activate the TALK button.
Battery Power Saver - Once fully charged, in STANDBY mode, the HANDSET can
receive/send calls for a maximum of five days without the need for recharging.
Length of charge depends on frequency of use.
HANDSET Ringer Level - Select the ringer sound level (HI, LOW, OFF).
HANDSET Volume Control Switch - Select the receiver volume level (HI, MID, LOW).
Luminous LCD Screen - The LCD Screen emits light for 10 seconds every time you
press any of the TELEPHONE KEYPAD buttons.
HEADSET JACK - Your telephone can utilize a headset for hands-free communication.
BELT CLIP - Use the BELT CLIP to hang your HANDSET on your belt.
Special Features
CALLER ID SYSTEM
Multi-Function Large LCD Screen - Shows the number you are dialing, and with Caller ID
service (available through subscription from your local telephone company), displays
information about the caller before you answer the call.
Name and Number DIRECTORY (PHONE BOOK) - Stores up to 40 names and numbers so that
you can call them with a single key stroke.
Caller List - Available with Caller ID service. Stores up to 80 calls to keep track of everyone who
called. The name, phone number, time, and date of the call are recorded. Allows you to return
their calls with a few key strokes.
Preferred Calls - You can mark the name and number of a welcome caller in the DIRECTORY
(PHONE BOOK). When that number calls in, the caller’s name will appear on the LCD Screen
and a special ring sound will be heard.
Blocked Calls - You can mark the name and number of an unwelcome caller in the DIRECTORY
(PHONE BOOK). When that number calls in, the caller’s name will appear on the LCD Screen
and the ringer will be disabled.
Repeat Call Indicator - Shows if a new incoming call has called more than once.
Unavailable Call Indicator - Advises you that the origin of the incoming call does not support the
Caller ID system.
Call Waiting Service - Displays the name and number of the second caller, if you have subscribed
for Call Waiting service from your local telephone company (see page 15).
Voice Mail - Indicates message waiting signal if you subscribed to Voice Mail message service
and requested Visual Message Indication from your local telephone company (see page 15).
ANSWERING SYSTEM FEATURES
Fully Digital Answering System - Provides a full range of answering functions without using
cassette tapes.
Digital Memory - Allows recording of memos and messages.
Two-Digit LED Message Display - Indicates the number of messages, indicates the status of the
system.
Ring-Detection Selectable - Choose the number of times the telephone rings before the system
answers.
Voice Day/Time Stamp - System tells the day and time of each received message or recorded
memo.
Message Alert - The ability to generate a sound signal when new messages are recorded.
Call Screening - The ability to intercept a call when the unit is recording an incoming message
(ICM).
Mailboxes - Allows four separate individuals to receive their own incoming messages.
Auto Disconnection - Will automatically stop answering when the HANDSET of any phone on the
same line goes OFF-HOOK.
Fast Message Skip Function - Skips to the next message.
HANDSET Controls
1. LARGE LCD SCREEN
2. SCROLL UP-DOWN/SHIFT
LEFT-RIGHT BUTTON
Pg. 14, 16~26
3. NEW CALL/MESSAGE
WAITING LED
INDICATOR Pg. 15, 16
4. MENU/VOICE MAIL
BUTTON
Pg. 15, 22~27
5. HEADSET JACK
Pg. 13
6. TELEPHONE KEYPAD
Pg. 18~20, 22~27
9. BATT(BATTERY) LOW
INDICATOR Pg. 37
10. DIR (DIRECTORY)
BUTTON
Pg. 16~21
12. TALK BUTTON
Pg. 8, 9, 11, 12, 15,
16, 20, 27, 39
13. SAVE/REDIAL/
PAUSE BUTTON
Pg. 12, 17~20, 22~27
14. VOLUME CONTROL
(HI, MID, LOW)
SWITCH
15. OPTION (#) BUTTON
Pg. 16, 20, 21, 27
Pg. 21, 23, 27
8. EDIT/FLASH BUTTON
Pg. 15, 18~20, 22~27
16. DEL (DELETE)/CHAN
(CHANNEL) BUTTON
Pg. 17, 18, 20, 21,
36, 39, 41
17. CHARGE CONTACTS
HANDSET Controls
1. Large LCD Screen: Shows call information, phone status, prompts, and DIRECTORY
(PHONE BOOK) items.
large LCD Screen.
3. NEW CALL/MSG WTG (MESSAGE WAITING) LED Indicator: (NEW CALL) Blinks in
RED color to indicate that you have a new Caller ID call stored in memory. (MESSAGE
WAITING) Blinks in GREEN color when receiving a Message Waiting signal, if you have
subscribed to a Voice Mail message service from your local telephone company (See
page 15.)
HANDSET Controls
4.
VOICE MAIL /MENU Button: (VOICE MAIL) Press to automatically dial the Voice Mail
Post Code in your area to access your Voice Mail message. (MENU) Press and
hold to access the special functions operation in STANDBY mode. (For special
functions see pages 15, 22~27.)
5. HEADSET JACK: For connecting your headset plug to enjoy hands-free
communication. (See page 13 for detail.)
6. TELEPHONE KEYPAD 1 to 0 Buttons: Allows you to make a call depending
on pressed button. (For TELEPHONE KEYPAD characters, see page 19.)
7. TEMPORARY TONE * Button: Press to temporarily change the DIALING mode
from PULSE to TONE for Rotary Service Users. (Press once before entering
numbers to access the answering system or electronic banking services, etc.)
8.
9.
EDIT/FLASH Button: (EDIT) Press to edit listed items. (FLASH) Press to answer a call
if you have Call Waiting.
TALK
Button: Press to answer an incoming call or to place a call. Press to end a
call.
10. BATT LOW INDICATOR: Appears on the LCD Screen when the battery charge is low.
(See page 37 for detail.)
11.
12.
DIR DIRECTORY (PHONE BOOK) Button: Press to access names and numbers
stored in the DIRECTORY (PHONE BOOK). (See pages 16 to 21 for details.)
SAVE/
REDIAL
/PAUSE Button: (SAVE) Press and hold down to save the changes on the
listed items. (REDIAL) Press to redial the last number you dialed.(PAUSE) Press to
SAVE/
insert a pause while dialing. (You will need the
/PAUSE button to dial
REDIAL
numbers which use an alternative Long Distance Access Code.)
13. HANDSET Volume Control (HI, MID, LOW) Switch: Select the receiver volume level
(HI, MID, LOW).
14.
# /OPTION Button: (OPTION) Press to change the displayed telephone number
into 7, 10, or 11 digit DIALING mode during Caller ID callback.
15.
DEL/CHAN (DELETE/CHANNEL) Button: (DELETE) - Press and hold down to
delete items or individual characters. (CHANNEL) Press to change the operating
channel when you hear interference.
16. CHARGE CONTACTS: For charging the BATTERY PACK inside the HANDSET. We
recommend cleaning the CHARGE CONTACTS periodically with a damp cloth.
1. MAILBOX 1 BUTTON
2. MAILBOX 2 BUTTON
3. MAILBOX 3 BUTTON
4. MAILBOX 4 BUTTON
5. MAILBOX LED
INDICATORS
Pg. 29~33
18. BASE UNIT
ANTENNA
19. LED MESSAGE
DISPLAY
Pg. 33
20. SKIP BUTTON
6. REPEAT BUTTON
Pg. 29~33
21. ERASE BUTTON
7. TIME BUTTON
Pg. 29~33
23. ANSWER FUNCTION
ON/OFF BUTTON
Pg. 30
8. VOL + (VOLUME
UP) BUTTON
9. VOL - (VOLUME
DOWN) BUTTON
10. PAGE BUTTON
12. CODE BUTTON
Pg. 34
13. TONE-PULSE SELECT
SWITCH Pg. 8, 39
14. MESSAGE ALERT
SWITCH Pg. 31
15. ANNOUNCE ONLY/
INCOMING MESSAGE
SWITCH Pg. 30, 40
16. RINGER ON/OFF
SWITCH
17. RING SELECT
SWITCH Pg. 31
22. STOP BUTTON
24. ANSWER FUNCTION
ON/OFF LED
INDICATOR Pg. 30, 40
25. PLAY BUTTON
26. OUTGOING
MESSAGE BUTTON
Pg. 29, 30
27. IN USE/CHARGE
LED INDICATOR
28. SPEAKERPHONE
LEDINDICATOR
29. SPEAKERPHONE
BUTTON
30. MEMO BUTTON
Pg. 31, 33
31. RESET BUTTON
Pg. 28, 40
32. POWER-IN
CONNECTION JACK
Pg. 7, 8
33. TELEPHONE LINE
CONNECTION JACK
Pg. 7, 8, 10, 39
BASE UNIT Controls
1. (MAILBOX 1) Button: Press to activate functions for MAILBOX 1.
2. (MAILBOX 2) Button: Press to activate functions for MAILBOX 2.
3. (MAILBOX 3) Button: Press to activate functions for MAILBOX 3.
4. (MAILBOX 4) Button: Press to activate functions for MAILBOX
5. MAILBOX LED Indicators: Lights to indicate the presence of message(s) and
blinks to indicate that the corresponding MAILBOX is active and ready to operate.
6.
RPT
Button: Press to repeat messages.
7.
TIME
8.
VOL +
(VOLUME UP) Button: Press repeatedly to increase the speaker volume level
of the BASE UNIT.
9.
(VOLUME DOWN) Button: Press repeatedly to decrease the speaker volume
level of the BASE UNIT.
10.
Button: Press to set/check the day and time.
VOL -
PAGE
Button: Press to PAGE the HANDSET. Press again to stop.
11. CHARGE TERMINALS: For charging the HANDSET BATTERY PACK. For best
performance, clean the CHARGE TERMINALS periodically with a damp cloth.
12.
CODE
Button: Press and hold down to set the 3- digit Remote Access Code for
remote operation.
13. TONE-PULSE SELECT SWITCH
14. MESSAGE ALERT: Set switch to ON to generate a “beep” sound every 12 seconds
when a new message has been received.
15. ANNOUNCE ONLY/INCOMING MESSAGE Switch:
ICM - System records the incoming messages.
ANNC - System plays your announcement and then hangs up without
recording messages.
16. RINGER ON/OFF Switch: Set switch to OFF position to disengage the ringer on the
BASE UNIT.
17. RING SELECT Switch: To select the number of rings before the Answering System
answers a call.
3R - System answers a call after the third ring.
5R - System answers a call after the fifth ring.
TS (TOLL SAVER) - System answers after the third ring only if you have new
messages. Otherwise, the system will answer after the fifth ring.
18. BASE UNIT ANTENNA
19. LED MESSAGE DISPLAY: Indicates the number of memos/messages received,
status of the system.
EA - Erasing
01 ~63 - No. of memos/messages
OP - OGM is playing
Ao - Announce Only
FU - Memory is full
PA - Pause
BASE UNIT Controls
20.
SKIP
SKIP Button: Press to skip messages. (DAY/TIME STAMP) Press to select the day,
hour, and minute setting of the Answering Systtem. (REMOTE ACCESS CODE) Press to
select the first, second, and third digit of the Remote Access Codes.
21.
ERASE
22.
STOP
23.
Button: Press to erase messages.
Button: Press to stop playing a message.
ANS
ON/OFF (ANSWER FUNCTION ON/OFF) Button: Press to activate or deactivate the
answer function.
24. ANSWER FUNCTION ON/OFF (ANS. ON/OFF) LED Indicator: Lights when the
answer function is turned ON.
25.
PLAY
26.
OGM
Button: Press to play messages.
OUTGOING MESSAGE) Button:Press and hold down to record OGM messages.
27. IN USE/CHARGE LED Indicator: Lights up to indicate that the HANDSET is in TALK
mode or the HANDSET is place on the BASE UNIT for charging.
28. SPEAKERPHONE LED INDICATOR: Lights up to indicate that the speaker is in use.
29.
SPK
30.
MEMO
(SPEAKERPHONE) Button: Press to answer a call using the BASE UNIT.
Button: Press and hold down to record memo messages.
31. RESET Button: Briefly press to reset the power. Press and hold down for 2 seconds
to reset the system and clear all recordings.
32. POWER-IN CONNECTION JACK
33. TELEPHONE LINE CONNECTION JACK
Contents
Safety Instructions.....................................................................................................................4
Getting Started...........................................................................................................................7
Desk Mounting............................................................................................................................10
Wall Mounting.............................................................................................................................10
Cordless Telephone Operation...................................................................................................11
Preparing for Use................................................................................................................ 11
Receiving Calls.................................................................................................................... 11
Placing Calls.........................................................................................................................12
Redial Feature......................................................................................................................12
Using the Headset Feature..................................................................................................13
Caller ID System Operation........................................................................................................ 14
Caller ID System...................................................................................................................14
Viewing Caller Information During Incoming Calls......................................................... 14
Caller ID with Call Waiting..............................................................................................15
Message Waiting...........................................................................................................15
One-Touch Voice Mail Dialing........................................................................................ 15
Caller List.............................................................................................................................16
Viewing the Caller List.................................................................................................. 16
Placing a Call from the Caller List.................................................................................. 16
Storing Caller ID Records into the DIRECTORY (PHONE BOOK)...................................... 17
Deleting a Single Record............................................................................................... 17
Deleting all Records.......................................................................................................17
Name and Telephone Number DIRECTORY (PHONE BOOK)................................................ 18
Viewing the DIRECTORY (PHONE BOOK)....................................................................18
Storing Phone Numbers.................................................................................................18
Telephone Keypad Characters......................................................................................19
Placing Calls from the DIRECTORY (PHONE BOOK)...................................................... 20
Editing a Stored Number in the DIRECTORY (PHONE BOOK)........................................ 20
Deleting a Stored Number in the DIRECTORY (PHONE BOOK)...................................... 21
Preferred Calls.............................................................................................................. 21
Blocked Calls.................................................................................................................21
Contents
Function Settings................................................................................................................22
A. Setting the Ringer Level.........................................................................................23
B. Changing the Language.........................................................................................23
C. Turning the First Ring ON or OFF........................................................................... 24
D. Setting the Time and Date...................................................................................... 24
E. Adjusting the Contrast........................................................................................... 25
F. Setting the PBX Number......................................................................................... 25
G. Changing the Flash Time........................................................................................25
H. Changing the Pause Time.......................................................................................26
I.
Programming One-Touch Voice Mail Dialing........................................................... 26
J. Deleting Message Waiting Indication......................................................................27
K. Setting the Area Code............................................................................................27
Answering System Operation.................................................................................................... 28
Setting the Day/Time Stamp................................................................................................28
Recording your Outgoing Messages..................................................................................28
Turning the Answering System ON/OFF............................................................................30
Setting to Answer Calls..................................................................................................... 30
Setting to Announce Only...................................................................................................30
Message Alert....................................................................................................................31
Setting Ring Select......................................................................................................... 31
Recording a Memo..........................................................................................................31
Playing of Messages/Memos..........................................................................................32
Saving Mesages.............................................................................................................33
Erasing Messages..........................................................................................................33
When the Memory is Full................................................................................................ 33
Two-Way Recording...................................................................................................... 33
Remote Operation through a Tone Telephone.................................................................34
Remote Access Codes.................................................................................................. 34
Changing of the Remote Access Codes........................................................................ 34
Using the Remote Instruction Code.................................................................................35
Contents
Security................................................................................................................................ 36
Recharging the BATTERY PACK...........................................................................................37
Changing the BATTERY PACK..............................................................................................38
Problem Solving....................................................................................................................39
Technical Information.................................................................................................................... 41
FCC Requirements..........................................................................................................................42
Warranty Information......................................................................................................................44
Wall Mount Template....................................................................................................................... 48
Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electric shock and/or injury, always follow these
basic safety precautions when using your cordless telephone equipment.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the telephone.
3. Do not use this telephone near a bathtub, wash bowl, kitchen sink, or laundry tub,
in a wet basement, near a swimming pool, or anywhere else where there is water.
4. Avoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electric shock from lightning.
5. Do not use the telephone to report a gas leak in the vicinity of the leak.
6. Use only the power cord and BATTERY PACK indicated in the Owner’s Manual. Do
not dispose of the BATTERY PACK in a fire. The BATTERY PACK may explode.
Check with local codes for possible special disposal instructions.
7. Operate this telephone using the electrical voltage as stated on the BASE UNIT or
in the Owner’s Manual. If you are not sure of the voltage in your home, consult your
dealer or local power company.
8. Unplug this telephone from the wall outlet before cleaning or replacing the
BATTERY PACK. Do not use liquid cleaners or aerosol cleaners on the telephone.
Use a damp cloth for cleaning.
9. Place this telephone on a stable surface. Serious damage and/or injury may result
if the telephone falls.
10. Do not cover the slots and openings on this telephone. This telephone should never
be placed near or over a radiator or heat register. This telephone should not be
placed in a built-in installation unless proper ventilation is provided.
11. Do not place anything on the power cord. Install the telephone where no one will
step or trip on the cord.
12. Do not overload wall outlets or extension cords as this can increase the risk of fire
or electric shock.
13. Never push any objects through the slots in the telephone. They could touch
dangerous voltage points or short out parts that could result in a risk of fire or
electric shock. Never spill liquid of any kind on the telephone.
14. To reduce the risk of electric shock, do not take this telephone apart. If service or
repair work is required on this telephone, take it to a qualified service
representative. Opening or removing covers may expose you to dangerous voltage
or other risks. Incorrect reassembly can cause electric shock when the appliance is
subsequently used.
15. Unplug this telephone from the wall outlet and consult a qualified service
representative in any of the following situations.
A. When the power supply cord is frayed or damaged.
B. If liquid has been spilled into the telephone.
C. If the telephone has been exposed to rain or water.
D. If the telephone does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions. Improper adjustment may require extensive work by a qualified
technician to restore the telephone to normal operation.
Safety Instructions
16.
17.
18.
19.
E. If the telephone has been dropped or the case has been damaged.
F. If the telephone exhibits a distinct change in performance.
Never install telephone wiring during a lightning storm.
Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
Never touch uninsulated telephone wires or terminals unless the telephone line
has been disconnected at the network interface.
Use caution when installing or modifying telephone lines.
Battery Safety
CAUTION:
Danger of explosion if BATTERY PACK is incorrectly replaced. Replace only
with the same or equivalent type. To reduce the risk of fire or personal
injury, read and follow these instructions:
1. Use only the following type and size of BATTERY PACK:
Cordless Telephone BATTERY PACK
3.6V, 600mAh
U.S. Electronics Inc.
Ni-MH BATTERY PACK: model B655
(See page 37 for ordering information.)
2. Do not dispose of the BATTERY PACK in a fire. The BATTERY PACK may explode.
Check with local codes for possible special disposal instructions.
3. Do not open or mutilate the BATTERY PACK. Released electrolyte from a BATTERY
PACK is corrosive and may cause damage to the eyes or skin. Electrolyte may be
toxic if swallowed.
4. Exercise care in handling the BATTERY PACK to prevent shorting the BATTERY
PACK with conductive materials such as rings, bracelets, and keys. The BATTERY
PACK or conductor may overheat and cause burns.
5. Charge the BATTERY PACK provided with (or identified for use with) this telephone
only in accordance with the instructions and limitations specified in this manual.
6. Observe proper polarity orientation between the BATTERY PACK and BATTERY
CHARGER.
Safety Instructions
SAVE THESE INSTRUCTIONS
ATTENTION:
The telephone that you have purchased contains a rechargeable BATTERY PACK. The
BATTERY PACK is recyclable. At the end of its useful life, under various state and local
laws, it may be illegal to dispose of this BATTERY PACK into the municipal waste
stream. Check with your local solid waste officials for details in your area for recycling
options or proper disposal.
Getting Started
Connecting Your Phone
This section is a reference guide to the basic functions and operations of your cordless
telephone. For more detailed descriptions of the operations and features of this
telephone, refer to the Contents on page 1.
1. Carefully remove your cordless telephone from its shipping carton. If there is any
visible damage, do not attempt to operate this equipment. Return it to the place
of purchase.
2. Check to be sure you have all items that come with this cordless telephone system.
You should have a HANDSET, BASE UNIT , AC ADAPTOR, BATTERY PACK,
MOUNTING BRACKET, TELEPHONE LINE CORD, SHORT TELEPHONE LINE CORD,
BELT CLIP, and Owner’s Manual.
BATTERY PACK
BASE UNIT
MOUNTING BRACKET
HANDSET
BELT CLIP
TELEPHONE LINE CORD
SHORT TELEPHONE LINE CORD
AC ADAPTOR
3. Insert the small plug on the end of the AC ADAPTOR into the POWER-IN
CONNECTION JACK at the back of the BASE UNIT.
4. Plug the AC ADAPTOR into a 120V AC wall outlet.
USE ONLY WITH CLASS 2 POWER SOURCE 9V DC, 500mA.
5. Insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE JACK
and the other end into the TELEPHONE LINE CONNECTION JACK at the back of
the BASE UNIT. (If you have an older 4-prong TELEPHONE JACK, you will need an
RJ-11C TELEPHONE JACK ADAPTOR. This adaptor is available at the same place
you purchased your telephone.)
6. We recommend not placing this unit next to appliances. Doing so may cause
interference.
Getting Started
120V WALL
OUTLET
TELEPHONE
JACK
AC ADAPTOR
TELEPHONE LINE
CONNECTION
JACK
POWER-IN
CONNECTION JACK
TONE/PULSE
SELECT SWITCH
TELEPHONE LINE CORD
7. Install the HANDSET BATTERY PACK by plugging it into the BATTERY CONNECTOR
inside the BATTERY COMPARTMENT.
8. Place the BATTERY PACK inside the BATTERY COMPARTMENT.
9. S l i d e t h e H A N D S E T B A T T E R Y
COMPARTMENT COVER firmly into
place in its closed position.
10. IMPORTANT: Before initial use, charge
the HANDSET for 12 hours.
11. TONE/PULSE Select Switch:
A. If your home is equipped with a tone
dialing system, set the TONE/
PULSE Select Switch to the TONE
position.
B. If you have a rotary dialing system,
set the TONE/PULSE Select Switch
to the PULSE position.
BATTERY PACK
C. If you are not sure which system you
have, set the TONE/PULSE Select
Switch to the TONE position. Press
the TALK button on the HANDSET
to get a dial tone, and press any
button on the TELEPHONE KEYPAD
except the zero. If the dial tone
BATTERY
continues, it means that you do not
COMPARTMENT
have TONE dialing service. Press
COVER
the TALK button on the HANDSET
to hang up. Set the TONE/PULSE
Select Switch to the PULSE mode
and then try again.
Getting Started
Press the TALK button to confirm that you
have a dial tone. If you do not get a dial tone,
review steps 3 through 11. If you still do not
have a dial tone, refer to the Problem
Solving section on pages 39~40.
Belt Clip Installation
With the back of the HANDSET facing up,
insert one side of the BELT CLIP HOOK into
the matching slot at the top side of the
HANDSET. Press down on the opposite side
of the BELT CLIP until the other hook locks
into the slot on the side of the HANDSET.
BELT CLIP HOOK
12. Set the date and time on the HANDSET. (See page 24 for details.)
13. Set the date and time on the BASE UNIT. (See page 28 for details.)
You are now ready to use your new
BellSouth Cordless Telephone.
Desk Mounting
Desk Mounting
For normal position, as shown in Figure 1, place
the BASE UNIT on any desired but suitable
location.
FIGURE 1
FIGURE 3
FIGURE 2
Wall Mounting
You may choose to put the BASE UNIT of your cordless telephone on a wall.
1. With the back of the BASE UNIT facing up, connect the SHORT TELEPHONE LINE
CORD to the TELEPHONE LINE CONNECTION JACK.
2. Insert the free end of the SHORT TELEPHONE LINE CORD through the hole of the
MOUNTING BRACKET.
3. Insert the OUTER HOOKS of the MOUNTING BRACKET into the matching slots on
the back of the BASE UNIT as shown in FIGURE 2.
4. Push the MOUNTING BRACKET upward until the LOCKING HOOKS snaps into the
SHORT TELEPHONE
inner slots of the BASE UNIT.
LINE CORD
MOUNTING
BRACKET
MODULAR
WALL JACK
WALL
PLATE
WALL PLATE STUD
5. Plug the free end of the SHORT TELEPHONE LINE CORD into the MODULAR WALL
JACK.
6. Align the upper keyhole of the MOUNTING BRACKET with the upper stud of the wall
plate, so that the opening end of the MOUNTING BRACKET matches the lower stud,
then pull the BASE UNIT down until it is securely seated.
10
Cordless Telephone Operation
Preparing for Use
Before you can use your cordless telephone, you must charge the HANDSET for 12
hours. Failure to do so will require recharging of the BATTERY PACK more often.
1. Place the HANDSET on the BASE UNIT for 12 hours.
2. After 12 hours, remove the HANDSET from the BASE UNIT.
Before you can use your cordless telephone, you must charge the HANDSET
for 12 hours. Failure to do so will require more frequent charging of the
BATTERY PACK. See page 37 for more information on the BATTERY PACK.
NOTE:
Depending on the frequency of use, once the HANDSET is fully charged, it remains
functional for approximately 4 hours of continuous use and approximately 5 days when
the HANDSET is off the BASE UNIT in STANDBY mode.
Receiving Calls
1. When the phone rings, the LCD Screen
will show “RING.” If you have Caller ID,
the LCD Screen will show the Caller ID
information after the first ring.
2. With the HANDSET off the base, press
the TALK button. Start your conversation.
The Call Timer starts to count.
3. To end your conversation, either press the TALK button or place the HANDSET on
the BASE UNIT . If you place the HANDSET on the BASE UNIT CHARGE CRADLE,
you activate the AUTOMATIC STANDBY feature.
NOTE: The Call Timer will start to count once you press the
TALK
button.
Minutes
Seconds
TALK
02
08
Call Timer Display
IMPORTANT
Do not use this telephone within 20 ft. of a microwave oven
while it is working, as you may experience interference.
This is a normal occurrence with 2.4 GHz phones and
should not be interpreted as a defect in the product.
11
Cordless Telephone Operation
Placing Calls
1. Press the TALK button, the Call Timer
starts to count.
2. Wait until you hear a dial tone and then
dial the phone number.
3. When you have finished your call,
press the TALK button again or place the
HANDSET on the BASE UNIT.
1, 2
OR
1. Dial the phone number.
2. Press the TALK button. T h e n u m b e r
displayed will be dialed.
3. When you have finished with your call,
press the TALK button again or place
the HANDSET on the BASE UNIT .
Redial Feature
1. If you get a busy tone, press the TALK
button or place the HANDSET on the BASE
UNIT to hang up.
2. Later, press the
TALK
button again.
3. Listen for a dial tone.
4. Press the SAVE /RE/PA button. This
will automatically redial the last telephone
number you called.
1, 2, 5
5. When you have finished with your call,
press the TALK button again or place
the HANDSET on the BASE UNIT .
NOTE:
If you are too far away from the BASE UNIT, the HANDSET emits “beep” sounds to
warn you that the background noise level is too high for proper communication between
the HANDSET and the BASE UNIT. When you hear this sound, you should move closer
to the BASE UNIT to reduce the noise level. Otherwise, the call will automatically cut off.
12
Cordless Telephone Operation
Using the Headset Feature
Your telephone can utilize a headset (not included) to be connected to your HANDSET
for you to enjoy hands-free communication.
Pull out the HEADSET JACK COVER then insert the small plug on the end of the headset into the HEADSET JACK at the left side of the HANDSET. Follow the procedures
discussed in “Receiving Calls” and “Placing Calls” to receive and place a call.
NOTE:
When you plug the headset plug into the HEADSET JACK it automatically mutes the
MICROPHONE and SPEAKER of the HANDSET. Unplug the headset to return the
HANDSET to normal use.
Headsets are available at most retail outlets that sell telephone equipment. The
HEADSET JACK is compatible with 2.5 mm headset plugs only.
HEADSET
MICROPHONE
SPEAKER
HEADSET
PLUG (2.5mm)
HEADSET JACK
IMPORTANT
Placing your BASE UNIT near appliances
such as televisions, refrigerators, radios, or
microwave ovens may cause interference.
13
Caller ID System Operation
Caller ID System
This telephone automatically displays an incoming caller’s name and telephone
number together with the date and time of the call. It records up to 80 calls and stores
the data in Memory.
IMPORTANT: You must subscribe to the Caller ID service from your local telephone
company to utilize this feature.
Viewing Caller Information During Incoming Calls
1. When there is an incoming call, the name and the telephone number of the caller
will automatically appear after the first ring. Press the SHIFT RIGHT
button to
view a name of more than 11 characters.
OR
Caller’s telephone number will appear if the caller’s name
is not available.
OR
“UNAVAILABLE” will appear when Caller ID information
is not available. The origin of the call does not support
the Caller ID system (including international calls).
OR
“DATA ERROR” will appear when the Caller ID
information was received incorrectly or only part of the
data was received.
NOTE: When an error is received, none of the data from
this call is saved in memory.
OR
“PRIVATE” will appear if the caller’s name and/or
telephone number is blocked.
OR
“MSG WAITING” will appear when a Voice Mail Message
has been received and is stored by the Message Waiting
service provided by the telephone company.
14
Caller ID System Operation
Caller ID with Call Waiting
When you subscribe to Call Waiting service from your local telephone company, this
telephone will display the name and number of the second caller while you are
having a conversation with the first caller.
When a new call comes in while you are
talking, you will hear a notification beep from
the HANDSET and the volume is momentarily
muted. The new caller’s name and phone
number, if available, appears on the display.
MIN
SEC
RPT
Second
Caller
First
Caller
1. When you receive a “Call Waiting” call and you want to connect the call,
press the EDIT/FLASH button and start talking with the second caller. The
active call will be placed on hold.
2. Press the
3. Press the
call.
EDIT/FLASH
TALK
button to alternate between calls.
button or place the HANDSET on the BASE UNIT to end the
“MSG WAITING” (Message Waiting)
The Message Waiting LED indicator will blink green when there is a message for
you from your telephone company if you have subscribed to Voice Mail message
service and if you have requested Visual Message Indication from your local
telephone company. “MSG WAITING” will appear on the LCD Screen in STANDBY
mode. (To remove the MSG WAITING indicator, see page 27 for detail.)
Note: This function requires voice mail subscription from the local telephone
company. Furthermore, the local phone company must provide a type of voice mail
signaling called “FSK” (Frequency Shift Key). Not all telephone companies have
the visual message waiting feature available. Please contact your local telephone
company to check if this is available in your area.
One-Touch Voice Mail Dialing
When the setting is programmed in the Functions menu (see “Programming
One-Touch Voice Mail Dialing” on page 26) you can dial out a programmed number
at the touch of a button. This feature is specifically designed to easily check voice
mail when you have that service through your telephone company.
1. Press the
2. Press the
TALK
button to access the telephone line.
VOICE MAIL
/MENU button.
3. The phone will automatically dial the number.
15
Caller ID System Operation
Caller List
This phone automatically stores the last 80 calls received. It records call information
such as caller’s name and telephone number together with the date and time of the call.
The NEW CALL LED indicator will blink red to indicate that you have a new Caller ID call
stored in memory.
Viewing the Caller List
1. With the HANDSET in STANDBY mode, press the SCROLL UP
or DOWN
button.
2. Any unviewed (new) calls will be displayed first. The most recent call will be
displayed. The information on the call will be displayed with the name, number,
date, and time that the call was received.
RPT
3. To scroll to the next call, press the SCROLL UP
or DOWN
button. Pressing
the SCROLL DOWN
button will go through the calls from the last call received
to the first Caller ID record. Pressing the SCROLL UP
button will allow you to
view the calls from the first call received to the last.
4. Press the SHIFT RIGHT
button to view a name of more than 11 characters.
If the number has more than 11 digits, the last 11 digits will be displayed first.
Press the SHIFT RIGHT
button to view the preceeding numbers.
5. Press the DIR button to return to STANDBY mode.
Placing a Call from the Caller List
You can place a call from the Caller List by using the Caller ID CALLBACK feature.
1. Press the SCROLL UP
wish to call back.
or DOWN
button to find the Caller ID record you
2. Press the # /OPTION button to change the displayed number to 7, 10, or 11
digits. The first dialing option displayed
is the 11 digits for a long distance call.
First press.
Press the # /OPTION button for the
second time, the displayed number will
change to 7 digits for a local call.
Press the # /OPTION button for the third
time, the displayed number will change
to 10 digits for a local call with area code.
RPT
Second press.
RPT
Third press.
RPT
3. Press the
TALK
button to dial the displayed number.
4. Press the
DIR
button to cancel dialing and return to STANDBY mode.
5. To end a call, either press the
UNIT.
TALK
16
button or place the HANDSET on the BASE
Caller ID System Operation
Storing Caller ID Records into the DIRECTORY (PHONE BOOK)
1. Press the SCROLL UP
or DOWN
button to find the record you wish to
store into the DIRECTORY (PHONE BOOK).
2. Press and hold the
SAVE
/RE/PA button.
3. The display will show “SAVED.”
4. If you wish to edit the newly stored number, edit it in the DIRECTORY
(PHONE BOOK) (page 20, “Editing a Stored Number”).
5. Press the
DIR
button to return to STANDBY mode.
Deleting Caller ID Records
When viewing the Caller ID information you can delete a single call record or all
of the call records.
Deleting a Single Record
1. Press the SCROLL UP
to delete.
2. Press the
DEL/CHAN
or DOWN
button. The LCD Screen will display “ERASE ITEM?”
3. To delete the record, press the
display “ERASED.”
4. Press the
DIR
button to find the record you wish
DEL/CHAN
button again. The LCD Screen will
button to exit the Caller ID List.
Deleting All Records
1. Press the SCROLL UP
2. Press and hold the
ALL?”
or DOWN
DEL/CHAN
button.
button. The LCD Screen will display “ERASE
3. To delete all of the Caller ID records, press the DEL/CHAN button. The LCD
Screen will display “ALL ERASED” and then return to STANDBY mode.
17
Caller ID System Operation
Name and Telephone Number DIRECTORY (PHONE BOOK)
This DIRECTORY (PHONE BOOK) lets you scroll through the list to find the person you
need for one touch dialing. You can store up to 40 names and telephone numbers in the
Memory.
Viewing the DIRECTORY (PHONE BOOK)
1. Press the
DIR
button.
2. Press the TELEPHONE KEYPAD ( 2 /ABC
to 9 /WXY) button that corresponds to
the first letter of a Caller’s name (a triple
“beep” will sound if no entries are stored
under those letters). Press the SCROLL
UP
or DOWN
button to find the
record you wish to view.
1, 4
3. Press the SHIFT RIGHT
button to view
a name of more than 11 characters. If the
number has more than 11 digits, the last
11 digits will be displayed first. Press the
SHIFT RIGHT
button to view the
preceeding numbers.
4. Press the DIR button to exit the DIRECTORY (PHONE BOOK), or the DIRECTORY
(PHONE BOOK) will time out.
Storing Phone Numbers
1. With the HANDSET in STANDBY mode, press the
2. Press the
EDIT/FLASH
DIR
button.
button to create a new DIRECTORY (PHONE BOOK) entry.
3. Enter the name you wish to store using the TELEPHONE KEYPAD 2 /ABC to
9 /WXY buttons to enter the name, (see page 19 for detail) you can store up
to 18 letters. To move the cursor to the right, create a space or to enter a new
letter, press the SHIFT RIGHT
button.
4. Press the SCROLL DOWN
button, and dial the telephone number you wish
to store using the TELEPHONE KEYPAD 1 to 0 buttons. You can store up
to 22 digits. Briefly press the SAVE /RE/PA button to insert a pause into the number.
5. Press and hold the
SAVE
/RE/PA button to store the number into memory.
NOTES:
1. If there are no memory locations left in the speed dial DIRECTORY (PHONE
BOOK) the LCD Screen will display “MEMORY FULL.” To continue with memory
programming, you must delete or edit existing speed dial numbers.
2. If you mis-type entering the phone number, you can move through the number
and edit it by pressing the SHIFT RIGHT
or LEFT
button. To delete a
character or number inside the cursor, press the DEL/CHAN button.
18
Caller ID System Operation
Telephone Keypad Characters
The TELEPHONE KEYPAD buttons are used to enter characters when entering
names and numbers. Press the appropriate TELEPHONE KEYPAD button to
get the following characters. You can store a maximum of 18 characters on the
letter icon and a maximum of 22 digits on the number icon.
Keypad
1st
2nd
3rd
4th
5th
6th
7th
8th
9th
Buttons
Press
Press
Press
Press
Press
Press
Press
Press
Press
Space
‘
Space 1
EXAMPLE:
If you want to enter the name “ALEX” with telephone number “2426978,” dial this
sequence:
1. Press the
2. Press the
DIR
button.
EDIT/FLASH
button to create a new DIRECTORY (PHONE BOOK) entry.
3. Press the following TELEPHONE KEYPAD buttons to get the desired letters:
TELEPHONE KEYPAD BUTTON
555
33
99
LETTER
4. Press the SCROLL DOWN
button to move the cursor to the number icon.
5. Press the following TELEPHONE KEYPAD buttons
to get the desired numbers.
/OPER to
/WXY
6. Press and hold the SAVE /RE/PA button to store the data in the DIRECTORY
(PHONE BOOK) memory.
19
Caller ID System Operation
Placing Calls from the DIRECTORY (PHONE BOOK)
1. Press the
DIR
button.
2. Press the SCROLL UP
call.
or DOWN
button to find the record you want to
OR
Press a TELEPHONE KEYPAD ( 2 /ABC to 9 /WXY) button that
corresponds to the first letter of a name. Press the SCROLL UP
or DOWN
button to find the record you wish to call.
3. Press the # /OPTION button to change the displayed number to 7, 10, or 11
digits. The first dialing option displayed
is the 11 digits for a long distance call.
First press.
RPT
Press the # /OPTION button for the
second time, the displayed number will
change to 7 digits for a local call.
Second press.
RPT
Press the # /OPTION button for the third
time, the displayed number will change
to 10 digits for a local call with area code.
4. Press the
TALK
Third press.
RPT
button to dial the displayed number.
5. To end the call, either press the
UNIT.
TALK
button or place the HANDSET on the BASE
Editing a Stored Number in the DIRECTORY (PHONE BOOK)
1. Press the
DIR
button.
2. Press the SCROLL UP
or DOWN
button to find the record you wish to edit.
3. Press the EDIT/FLASH button. The entry will display with a flashing prompt over
the first character.
TOTAL
4. Move the cursor to the letter or number you wish to edit by pressing the SCROLL
UP
or DOWN
, SHIFT RIGHT
or LEFT
button.
To erase a character or digit, press the
DEL/CHAN
button.
To add a letter or number, use the TELEPHONE KEYPAD 1 to 0 /OPER
buttons. Characters or numbers will be inserted in front of the cursor (See page
19 for details.)
5. When the entry is edited as you desire, press and hold the
store the edited record.
20
SAVE
/RE/PA button to
Caller ID System Operation
Deleting a Stored Number in the DIRECTORY (PHONE BOOK)
1. Press the
DIR
button.
2. Press the SCROLL UP
delete.
3. Press the
DEL/CHAN
or DOWN
button. The LCD Screen will display “ERASE ITEM?”
4. To delete the record, press the
5. Press the
DIR
button to find the record you wish to
DEL/CHAN
button again.
button to return to STANDBY mode.
PREFERRED CALLS
You can assign stored numbers a PREFERRED CALL status. When an incoming
call is matched to a stored number designated as preferred, the phone will generate
a special ringer sound after the Caller ID information is received.
When you are saving the name and number
into the DIRECTORY (PHONE BOOK), add a
“#” symbol at the beginning of the name by
pressing the # button.
TOTAL
BLOCKED CALLS
You can assign stored numbers a BLOCKED CALL status. When an incoming call
is matched to a stored number designated as blocked, the phone will not ring after
the Caller ID information is received.
When you are saving the name and number
into the DIRECTORY (PHONE BOOK), add
an “*” symbol at the beginning of the name
by pressing the * button.
TOTAL
IMPORTANT
Placing your BASE UNIT near appliances
such as televisions, refrigerators, radios, or
microwave ovens may cause interference.
21
Caller ID System Operation
Function Settings
You can change the setting on the HANDSET in the functions menu. Access the
functions menu by pressing and holding the VOICE MAIL /MENU button.
There are 11 settings in the functions menu which can be changed. You can scroll
through the function menu in the listed order by pressing the SCROLL DOWN
button.
Settings can be accessed by pressing the corresponding TELEPHONE KEYPAD
button. To edit a setting, press the EDIT/FLASH button, use the SCROLL UP
or DOWN
button to toggle between the setting options, and then press and hold the
SAVE /RE/PA button to save the changes. Press the VOICE MAIL /MENU button to exit the
functions menu.
TELEPHONE
KEYPAD
Function
Ring Hi/Low/Off: Changes the volume of the ringer on the HANDSET
or turn the ringer OFF.
Language: Changes the language that appears on the LCD Screen.
Choose between English, French, or Spanish.
First Ring On/Off: Turns the first ring of the phone OFF so that it does
not ring until Caller ID information has been displayed. Particularly
useful when using the PREFERRED and BLOCKED CALL features
or the PRIVATE and UNAVAILABLE ring settings.
Time Set: Changes the time and date.
Contrast: Adjusts the brightness of the LCD Screen for optimum
viewing.
PBX Number: Inserts if a “PBX Number” before an outgoing number
is dialed. Select the number (0-9) which is required to access an
outside line when using a switchboard system, and the phone will
automatically dial the PBX number and a pause before any speed
dial or Caller ID callback number. Factory setting is “OFF.”
Flash Time: Changes the flash time to accommodate the phone
service in your area.
Pause Time: Changes the number of seconds that a pause lasts
when using programmed pauses in your speed dial numbers or
after your PBX number.
Voice Mail: Programs the one-touch number that enables easy
access to the voice mail service provided by your telephone
company.
22
Caller ID System Operation
TELEPHONE
KEYPAD
Function
MSG Waiting Delete: Clears current message waiting indication.
Area Code: This unit does not require any programming of an Area
Code. However, this option could be used to add the local Area Code
to numbers that were stored as 7-digits in the phone book and 10digit dialing is required in the local calling area.
NOTE: At any time during options programming you can quit and the settings
that you have changed will be saved. Press the VOICE MAIL /MENU button to quit
the options menu or let the options programming time out by not pressing
any TELEPHONE KEYPAD buttons for 20 seconds.
A. Setting the Ringer Level
1. Press and hold the
VOICE MAIL
2. Press the
button to change the setting. “HI” will begin flashing.
EDIT/FLASH
3. Press the SCROLL UP
OFF.
/MENU button to enter the menu.
or DOWN
button to toggle between HI, LOW, and
4. When the desired setting is displayed, press and hold the SAVE /RE/PA button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
5. Continue with programming or press the
STANDBY mode.
VOICE MAIL
/MENU button to return to
B. Changing the Language
1. Press and hold the
2. Press the
3. Press the
flashing.
VOICE MAIL
/MENU button to enter the menu.
button to go to the LANGUAGE programming option.
EDIT/FLASH
button to change the setting. “ENGLISH” will begin
4. Press the SCROLL UP
or DOWN
ESPANOL, and FRANCAIS.
button to toggle between ENGLISH,
5. When the desired setting is displayed, press and hold the SAVE /RE/PA button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the
STANDBY mode.
23
VOICE MAIL
/MENU button to return to
Caller ID System Operation
C. Turning the FIRST RING ON or OFF
1. Press and hold the
2. Press the
3. Press the
VOICE MAIL
/MENU button to enter the menu.
button to go to the FIRST RING programming option.
button to change the setting. “On” will begin flashing.
EDIT/FLASH
4. Press the SCROLL UP
or DOWN
button to toggle between ON and OFF.
5. When the desired setting is displayed, press and hold the SAVE /RE/PA button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the
STANDBY mode.
VOICE MAIL
/MENU button to return to
D. Setting the Time and Date
1. Press and hold the
2. Press the
3. Press the
flashing.
VOICE MAIL
/MENU button to enter the menu.
button to go to the TIME set programming option.
EDIT/FLASH
button to change the setting. The month will begin
4. Press the TELEPHONE KEYPAD
date will begin flashing.
to
button to enter the month. The
5. Press the TELEPHONE KEYPAD
hour will begin flashing.
to
button to enter the date. The
6. Press the TELEPHONE KEYPAD
minutes will begin flashing.
to
button to enter the hour. The
button to enter the minutes.
7. Press the TELEPHONE KEYPAD
“AM” and “PM” will begin flashing.
8. Press the TELEPHONE KEYPAD
2 button to choose PM.
to
button to choose AM or press the
9. When the desired setting is displayed, press and hold the SAVE /RE/PA button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
10. Continue with programming or press the
STANDBY mode.
24
VOICE MAIL
/MENU button to return to
Caller ID System Operation
E. Adjusting the Contrast
1. Press and hold the
2. Press the
3. Press the
EDIT/FLASH
VOICE MAIL
/MENU button to enter the menu.
button to go to the CONTRAST programming option.
button to change the setting. “4” will begin flashing.
4. Press the SCROLL UP
contrast.
or DOWN
button to toggle from 1 to 8 levels of
5. When the desired setting is displayed, press and hold the SAVE /RE/PA button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the
STANDBY mode.
VOICE MAIL
/MENU button to return to
F. Setting the PBX Number
1. Press and hold the
2. Press the
3. Press the
EDIT/FLASH
VOICE MAIL
/MENU button to enter the menu.
button to go to the PBX NUMBER programming option.
button to change the setting. “OFF” will begin flashing.
4. Press the SCROLL UP
or DOWN
button to customize the digit to match
your PBX system. When not connected to a PBX, the phone will only function
normally when set to “OFF.”
5. When the desired setting is displayed, press and hold the SAVE /RE/PA button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the
STANDBY mode.
VOICE MAIL
/MENU button to return to
G. Changing the Flash Time
1. Press and hold the
2. Press the
3. Press the
EDIT/FLASH
VOICE MAIL
/MENU button to enter the menu.
button to go to the FLASH TIME programming option.
button to change the setting. “600” will begin flashing.
4. Press the SCROLL UP
or DOWN
button to select the desired FLASH TIME.
25
Caller ID System Operation
5. When the desired setting is displayed, press and hold the SAVE /RE/PA button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the
STANDBY mode.
VOICE MAIL
/MENU button to return to
NOTE: The standard and default flash time setting is 600 msec. This is the setting
you should use to access standard telephone services such as call waiting. This
setting is adjustable to allow for PBX and other special uses.
H. Changing the Pause Time
1. Press and hold the
2. Press the
3. Press the
EDIT/FLASH
VOICE MAIL
/MENU button to enter the menu.
button to go to the PAUSE TIME programming option.
button to change the setting. “4” will begin flashing.
4. Press the SCROLL UP
or DOWN
button to select the desired time delay.
5. When the desired setting is displayed, press and hold the SAVE /RE/PA button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the
STANDBY mode.
VOICE MAIL
/MENU button to return to
I. Programming One-Touch Voice Mail Dialing
1. Press and hold the
2. Press the
3. Press the
EDIT/FLASH
VOICE MAIL
/MENU button to enter the menu.
button to go to the VOICE MAIL programming option.
button to enter the voice mail speed dial number.
4. Press the TELEPHONE KEYPAD 1 to 0 buttons to enter the phone number
used to access your voice mail messages (up to 15 digits).
5. When the desired setting is displayed, press and hold the SAVE /RE/PA button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the
STANDBY mode.
VOICE MAIL
/MENU button to return to
NOTE:
When reviewing a stored VOICE MAIL number that contains more than 11 digits,
the last 11 digits will be displayed first. Press the SHIFT RIGHT
button to view
the preceeding numbers.
26
Caller ID System Operation
J. Deleting Message Waiting Indication
1. Press and hold the
2. Press the
VOICE MAIL
/MENU button to enter the menu.
button to go to the MESSAGE WAITING programming option.
3. Press the EDIT/FLASH button to reset the Message Waiting Indication. “DEL” will
begin flashing.
4. Press and hold the SAVE /RE/PA button to delete the indication. A long “beep” will
sound to confirm the setting has been saved.
5. Continue with programming or press the
STANDBY mode.
VOICE MAIL
/MENU button to return to
K. Setting the Area Code
1. Press and hold the
2. Press the
3. Press the
EDIT/FLASH
VOICE MAIL
/MENU button to enter the menu.
button to go to the AREA CODE programming option.
button to change the setting. “000” will begin flashing.
4. Press the TELEPHONE KEYPAD
code for your phone number.
to
buttons to enter the three digit area
5. When the desired setting is displayed, press and hold the SAVE /RE/PA button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Press the
VOICE MAIL
/MENU button to return to STANDBY mode.
NOTE:
To use the call back function, press the # /OPTION button and then select the
10-DIGIT DIALING mode. Press the TALK button and the unit will automatically dial
the stored 7-digit number plus the area code.
IMPORTANT
In order to utilize the Caller ID feature, you
must subscribe to Caller ID service from
your local telephone company.
27
Answering System Operation
IMPORTANT: To ensure the proper operation of your Answering System:
1. Plug the AC ADAPTOR into the POWER - IN CONNECTION Jack.
2. Press and hold down the RESET button for 2 seconds at the back of the BASE
UNIT before initial use.
Setting the Day/Time Stamp
Press and hold down the SET button until you hear the announcement “Time is off,
please enter new time.” Then, enter the current day and time.
1. Day Setting
Press and and hold down the TIME button
for 2 seconds then press the SKIP or
RPT button to select the desired day
setting. Press TIMEbutton again to accept
the setting, and then the LED Screen
will display hour setting.
2. Hour Setting
Press the SKIP or RPT button to select the
hour, then press the TIME button to accept
the setting. The LED Screen will
display the minute setting.
3. Minute Setting
Press the SKIP or RPT button to select the
desired minute, then press the TIME
button to accept the setting.
NOTES:
1. The HANDSET and BASE UNIT clocks are independent from each other. Set the
HANDSET clock by following the time setting steps on page 24.
2. In case of power failure, reset the time setting on the BASE UNIT clock.
Recording Your Outgoing Messages
Your Answering System provides one PRIMARY MAILBOX and four individual
MAILBOXES (1, 2, 3, 4) which can receive their own Incoming Messages (ICM). Before
using your Answering System, it is suggested that you record an Outgoing Message
(OGM). This is the announcement callers will hear when the system answers a call.
A prerecorded system announcement “Please record your message after the beep” is
available if you choose not to record your own OGM.
28
Answering System Operation
A. Recording your OGM in the PRIMARY MAILBOX
1. Press and hold down the OGM button to record your message.
2. Begin speaking immediately after you hear, “Please record your announcement after the beep.” Continue to depress the OGM button. One second
after completing your OGM, release the OGM button and the Answering
System will announce, “End of Recording.” Your recorded message will be
played back for your approval.
NOTE: Your OGM must be at least 3 seconds and no more than 30 seconds in
length.
If you wish to change your OGM, repeat steps 1 through 2.
NOTE: To obtain a better sound quality for locally recorded (OGMs and Memos)
messages, speak directly into the MICROPHONE from a distance of
9 to 12 inches.
It is recommended that you record an OGM on your PRIMARY MAILBOX instructing
a caller to leave an ICM in one of the four mailboxes. If the caller is using a Touchtone
telephone, this will enable the caller to record an ICM directly into one of the four
mailboxes by dialing “ 110” for MAILBOX 1, “ 220” for MAILBOX 2, “ 330” for MAILBOX 3,
“440” for MAILBOX 4.
Example of a Primary OGM: “Hello, please leave a message after the tone, or if you
are using a Touchtone telephone, please Dial 110 for Beth, Dial 220 for Jenny, Dial
330 for Jonathan, Dial 440 for Esson.”
NOTE: To check your OGM, press the OGM button. If you did not record an OGM, your
Answering System will announce, “You have no announcement.”
B. Recording your OGM for Individual MAILBOX 1, 2, 3, or 4
1. Press a mailbox button, the corresponding MAILBOX LED indicator will blink.
2. Press and hold down the OGM button to record your message.
3. Begin speaking immediately after you hear, “Please record your announcement after the beep.” Continue to depress the OGM button. One second
after completing your OGM, release the OGM button. The Answering System
will announce, “End of Recording.” Your recorded message will be played
back for your approval.
NOTE: Your OGM must be at least 3 seconds and no more than 30 seconds in
length.
If you wish to change your OGM, repeat steps 1 through 3.
29
Answering System Operation
NOTE: To check your OGM in a mailbox, press a mailbox button and then press
the OGM button. If you do not have an OGM in a mailbox, it will announce
“MAILBOX #, you have no announcement.” Once a mailbox is activated, its
corresponding MAILBOX LED indicator blinks slowly to show that the
mailbox is active. If you do not press a button to activate another function
within 10 seconds, the Answering System will return to the PRIMARY
MAILBOX. You may return to the PRIMARY MAILBOX at anytime by
pressing the STOP button.
Turning the Answering System ON/OFF
ANS
1. Press the ON/OFF
button to turn ON the Answering System. You will hear the
following message, “Answering machine is ON.”
ANS
2. Press the ON/OFF
button again to turn OFF the Answering System. You will now hear
the following, “Answering machine is OFF.”
NOTE: Once turned OFF, the answer function will answer only after the tenth ring,
allowing you to turn the Answering System ON from a remote location.
Setting to Answer Calls
The ANSWER ON/OFF LED indicator must be ON for the Answering System to
answer calls. Depending on the setting of the ANNC/ICM switch, the Answering
System will either hang up after your announcement (ANNC) or begin to record your
caller’s messages (ICM). After the caller leaves an ICM, the time and day will be
stamped at the end of each recorded ICM. The ICM is stored in the MEMORY and
the LED Message Display shows the total number of ICMs currently stored.
NOTE: ICMs are limited to a maximum of 2 minutes. If the ICM is more than 2
minutes, the system “beeps” and hangs up; or if the Answering
System’s MEMORY runs out, the Answering System announces, “Memory
full” and hangs up.
Setting to Announce Only
During ANNC (Announce) mode, your system answers incoming calls with your
recorded ANNC but will not record any ICMs.
1. Set the ANNC/ICM select switch to ANNC. The LED Message Display shows “Ao.”
2. Press and hold down the OGM button to record your ANNC.
3. Begin speaking after you hear, “Please record your announcement after the
beep.” Do not release the OGM button until you have completed your
announcement OGM.
4. One second after completing your ANNC, release the OGM button and you will
hear, “End of recording.” Your recorded ANNC will be played back for your
approval.
NOTE: Your OGM must be at least 3 seconds and no more than 30 seconds in
length. If you have not recorded an ANNC, the Answering System will answer
“Memory Full” and hangs up.
30
Answering System Operation
Message Alert
When the message alert switch is “ON,” the unit will generate a “beep” sound every
12 seconds after a new message has been recorded. If you do not want to hear the
“beep,” set the switch to “OFF.”
Setting Ring Select
To choose the number of times the phone rings before the Answering System
responds, set the Ring Select switch to 3R, 5R or TS (TOLL SAVER).
Set to 3R - System answers call after the third ring.
Set to 5R - System answers call after the fifth ring.
Set to TS - Use “TOLL SAVER” (TS) when you will be checking your system for
messages from a remote location using long distance services or from
a pay phone. The Answering System responds after the third ring only
if you have a new message waiting. If there are no new messages, the
phone will answer after the fifth ring. You can then hang up after the
fourth ring to avoid paying for the call.
Recording a Memo
A. To record a Memo in the PRIMARY MAILBOX
1. Press and hold down the MEMO button to record your Memo.
2. Begin speaking immediately after you hear, “Please record your message
after the beep.” Continue to depress the MEMO button. One second after
completing your Memo, release the MEMO button and you will hear, “End of
recording.” Day and time are automatically stamped at the end of the
message.
NOTE: The Answering System advances the message count automatically after the
actual message is recorded.
B. To record a Memo in an individual MAILBOX (1, 2, 3, 4)
1. Press a mailbox button, the corresponding MAILBOX LED indicator will blink.
2. Press and hold down the MEMO button to record your Memo.
3. Begin speaking immediately after you hear, “Please record your message
after the beep.” Continue to depress the MEMO button. One second after completing your Memo, release the MEMO button and you will hear, “End of Recording.” Day and time are automatically stamped at the end of the message.
NOTE: The Answering System advances the message count automatically after
the actual message is recorded.
31
Answering System Operation
Playing of Messages/Memos
A. To play messages/memos in the PRIMARY MAILBOX.
1. Press the PLAY button, the system will play all NEW messages/memos.
2. After playing all NEW messages/memos, press the PLAY button again, the
system will play all of its messages.
B. To play messages/memos in an individual MAILBOX (1, 2, 3, 4).
1. Press a mailbox button, the corresponding MAILBOX LED indicator starts to
blink.
2. Press the PLAY button. The system will play all NEW messages/memos.
3. After playing all NEW messages/memos, press the PLAY button again, the
system will play all of its messages/memos.
NOTE: When the MAILBOX LED indicators are lit, messages are present.
C. To interrupt a message.
1. Press the STOP button to end the playing of a message. The Answering System
will announce, “End of messages.”
D. To repeat a message/memo.
1. Press the R P T button while playing a message. The Answering System
repeats the current message in its entirety.
E. To skip a message/memo.
1. Press the SKIP button once. The Answering System stops playing, moves to
the next message/memo and resumes playback. The system advances one
message/memo each time you press the SKIP button.
NOTE: While playing a message, press the PLAY button to pause, “PA ” will be
displayed. Press the PLAY button again to continue playing the message
where you stopped.
IMPORTANT
To obtain a better sound quality for locally recorded (OGMs
and Memos) messages, speak directly into the
MICROPHONE from a distance of 9 to 12 inches.
32
Answering System Operation
Saving Messages
The Answering System saves your messages automatically. After playing all of your
messages, the Answering System announces, “End of message” and the total number
of messages stored in the memory will be indicated on the LED Message Display.
NOTE: The Answering System has a total Memory capacity of 14 minutes or up to 63
messages (OGM/ICM/MEMO). If the recorded messages contain high background
noise, the total recording capacity of the unit will be less than 14 minutes.
Erasing Messages
A. To erase all of the messages in the PRIMARY MAILBOX
1. Press and hold down the E R S button until you hear the announcement,
“Messages erased, you have no message.”
B. To erase all of the messages in an individual MAILBOX (1, 2, 3, 4)
1. If you want to erase all of the messages in a mailbox, activate the desired
mailbox.
2. Press and hold down the E R S button until you hear the announcement,
“Mailbox #, Messages erased.”
C. To erase selected messages/memos
1. While the unwanted message is playing, press the E R S button. The
Answering System announces erasure of the selected message/memo.
After the erasure is complete, the numeric order of the remaining messages
will be rearranged.
When the Memory is Full
When there is no memory available for additional messages, the Answering System
will announce, “Memory full,” but will not save messages.
Two-Way Recording
Two-way recording allows you to record your conversation with another caller. Two-way
recording can be enabled during conversation while you are using the HANDSET.
1. During conversation, press a mailbox button (MAILBOX 1, 2, 3, or 4) where you want
to record your conversation. The corresponding MAILBOX LED indicator will blink.
2. Press and hold down the MEMO button. The LED Message Display will show “2r ”
to indicate the recording mode.
3. Release the MEMO button to end your conversation recording.
4. Also you can record on the PRIMARY MAILBOX, just follow steps 2 and 3.
NOTE: Recording two-way conversations may be subject to local, state, or federal laws
and regulations. Consent of both parties is required when a conversation will be
recorded.
33
Answering System Operation
Remote Operation through a Tone Telephone
You can use many Answering System features when you are away from home. To
protect your privacy, most of the features can be used only after you enter the three-digit
Remote Access Code.
Remote Access Codes
The Remote Access Codes are preset at the factory as shown below. You can use the
preset codes or choose your own.
PRIMARY MAILBOX:
MAILBOX 1:
MAILBOX 2:
MAILBOX 3:
MAILBOX 4:
999
555
666
777
888
NOTE: If the RESET button is pressed, the Remote Access Codes return to the factory
preset codes.
Changing of the Remote Access Codes
All of the digits of the Remote Access Codes are a combination of numbers 5, 6, 7, 8,
9, 0.
IMPORTANT: Digits 1, 2, 3, and 4 cannot be used when changing the Remote Access
Codes for any mailbox (including the PRIMARY MAILBOX).
1. Press a mailbox button for MAILBOX 1, 2, 3, or 4. For the PRIMARY MAILBOX,
follow steps 2 to 6.
2. Press and hold down the CODE button until you hear the announcement,
“Your password is XXX, please enter new password.”
3. Press and release the DAY button, the corresponding number will be displayed
and announced. Press and release the DAY button repeatedly until the desired
first digit of the code is displayed and mentioned.
4. Press and release the HOUR button, the corresponding number will be displayed
and announced. Press and release the HOUR button repeatedly until the desired
second digit of the code is displayed and mentioned.
5. Press and release the MIN button, the corresponding number will be displayed
and announced. Press and release the MIN button repeatedly until the desired
third digit of the code is displayed and mentioned.
6. Press the CODE button, the 3-digits you have selected will be announced. If your
new Remote Access Code is the same as that of another mailbox, the
Answering System will not record your new password and announce, “please try
again.”
34
Answering System Operation
Using the Remote Instruction Code
1. Dial your telephone number.
2. Listen to or bypass the OGM in the PRIMARY MAILBOX.
3. Enter your Remote Access Code. If the announcement does not stop, enter the
Remote Access Code again.
4. The Answering System will request that you enter the Instruction Code or
press the “*” button for help.
A. If you do not know the Instruction Code, press the “*” button immediately. The
Answering System will announce the Instruction Codes. Otherwise, if a
command is not received by the Answering System within 10 seconds, it will
automatically hang up.
The following is the Remote Instruction Code Help Menu:
Instruction Codes
To playback message press “2.”
To repeat message press “1.”
To skip message press “3.”
To stop press “4.”
To playback announcement press “5.”
To record a memo press “6”
To record announcement press “7”
To turn answering machine ON or OFF press “8.”
To erase message press “9.”
(Press “1” for MAILBOX 1, press “ 2” for MAILBOX 2, press “ 3” for MAILBOX 3,
and press “4” for MAILBOX 4. Otherwise, if you did not press the desired
MAILBOX # location within 5~6 seconds, the Answering System will
automatically hang up.)
To change mailbox press “#.”
B. Press the corresponding number of the Instruction Code you wish to activate.
You don’t have to listen to the entire Instruction Code Help Menu before giving a
command. You may enter the desired Instruction Code Number at any given
time.
35
Speakerphone
Speakerphone Operation
This telephone allows you to answer calls
UNIT speakerphone function.
1.
When the phone rings, press the S P K button.
2.
Start your conversation.
3.
To end your conversation, press the
NOTE: Press the
VOL +
or
VOL -
SPK
using
the
BASE
button again.
button to adjust the BASE UNIT speaker volume to your comfortable
level.
Security System
Your cordless telephone uses a digital coding security system to prevent unauthorized
use of your telephone line by another nearby cordless telephone. The system has its
own identifying signal created by microcomputers in both the BASE UNIT and the
HANDSET.
Security Code
This telephone has an internal security code with 65,536 possible combinations.
Resetting Security Code and Channel Information
Communication between the HANDSET and the BASE UNIT may not be possible in any
of the following situations:
1. After a power failure.
2. After relocating the BASE UNIT by disconnecting the AC ADAPTOR.
3. After replacing the HANDSET BATTERY PACK.
To reset, place the HANDSET on the BASE UNIT for 2 to 5 seconds.
Multi-Channel Access
Your cordless telephone lets you select a channel from the 50 frequencies available to
transmit signals between the BASE UNIT and the HANDSET . When you notice
interference from other cordless telephones, change to another channel by pressing
the DEL/CHAN button on the HANDSET.
IMPORTANT
When you hear interference, press the DEL/CHAN
button change the operating channel.
36
Recharging the BATTERY PACK
Battery Type
Use the following type and size of BATTERY PACK:
Cordless Telephone BATTERY PACK
3.6V, 600mAh
U.S. Electronics Inc.
Ni-MH BATTERY PACK: Model B655
This BATTERY PACK is available through:
U.S. Electronics Service Center
105 Madison Avenue
New York, NY 10016
1-800-828-5208
NOTE:
1. During a power interruption, the BASE UNIT does not operate, and a phone
conversation cannot be made on the HANDSET.
Recharging the BATTERY PACK
The nickel metal hydride (Ni-MH) BATTERY PACK in the HANDSET can be recharged
many times using the built-in charger in the BASE UNIT.
When the BATT LOW symbol appears on the LCD Screen, a “beep” sound will be heard
every 10 seconds. This indicates that the BATTERY PACK needs to be recharged.
Charge the BATTERY PACK at least once every 90 days of non-use to avoid battery
failure. When the BATTERY PACK can no longer be charged, replacement of the
BATTERY PACK will be necessary.
The BATTERY PACK used in your telephone may develop a condition known as
“MEMORY.” Once subjected to a regular short discharging routine, the BATTERY PACK
assumes the discharging pattern it was subjected to. This causes rapid discharging
thereby shortening the BATTERY PACK charge span. If you believe your BATTERY PACK
has developed a “MEMORY” condition, do not charge the HANDSET until the BATT LOW
symbol appears on the LCD Screen. When the BATT LOW symbol appears on the LCD
Screen, charge the HANDSET fully for 12 hours.
IMPORTANT
In order to get maximum life from the HANDSET
BATTERY PACK, be sure to charge the HANDSET
for 12 hours before initial use.
37
Changing the BATTERY PACK
Changing the BATTERY PACK
The BATTERY PACK provides power for the HANDSET of your cordless telephone.
To Replace the BATTERY PACK:
1. Remove the HANDSET BATTERY COMPARTMENT COVER by sliding it down.
2. Pull out the BATTERY PACK PLUG and remove the BATTERY PACK.
Plug the new BATTERY PACK into the BATTERY CONNECTOR.
4. Slide the HANDSET BATTERY COMPARTMENT COVER firmly into place in its closed
position.
5. Before use, charge the new BATTERY PACK for 12 hours.
NEW
BATTERY
PACK
OLD
BATTERY
PACK
BATTERY
COMPARTMENT
COVER
ATTENTION:
The telephone that you have purchased contains a rechargeable BATTERY PACK. The
BATTERY PACK is recyclable. At the end of its useful life, under various state and local
laws, it may be illegal to dispose of this BATTERY PACK into the municipal waste
stream. Check with your local solid waste officials for details in your area for recycling
options or proper disposal.
IMPORTANT
In order to get maximum life from the HANDSET
BATTERY PACK, be sure to charge the HANDSET
for 12 hours before initial use.
38
Problem Solving
Problem Solving Section
For your assistance, we have listed below a few common problems.
Phone does not work, check the following:
1.
2.
3.
4.
BASE UNIT is plugged into a power source.
HANDSET is charged.
TONE/PULSE Select Switch is in the right position.
TELEPHONE LINE CORD is plugged into the TELEPHONE JACK.
Range of phone limited, check the following:
1. BASE UNIT is centrally located in your residence.
2. BASE UNIT is not located near appliances.
No dial tone, check the following:
1. TELEPHONE LINE CORD plugs are connected to the TELEPHONE JACK and
TELEPHONE LINE CONNECTION JACK.
2. BASE UNIT is plugged into a power source.
3. If you had a power failure or had unplugged the BASE UNIT, replace the HANDSET on
the BASE UNIT for 2 to 5 seconds to reset the system.
Received signal flutters or fades, check the following:
1. BATTERY PACK in the HANDSET is fully charged.
2. HANDSET is not too far from the BASE UNIT.
Interference on reception, check the following:
1. Noise may be picked up from electrical products in the home or electrical storms.
Generally, this noise is a minor annoyance and should not be interpreted as a defect
in your system. (See Technical Information on page 41).
2. Choose an alternate channel using the DEL/CHAN button on the HANDSET.
3. Do not use this telephone within 20 ft. of a microwave oven while it is working, as you
may experience interference. This is a normal occurrence with 2.4 GHz phones
and should not be interpreted as a defect in the product.
Excess static, check the following:
1. Check to see that the ANTENNA is not touching another metal object.
If after pressing the
following:
TALK
button, you receive three “beeps” and no dial tone, check the
1. BASE UNIT is plugged into a power source.
2. If you had a power failure or had unplugged the BASE UNIT, replace the HANDSET on
the BASE UNIT for 2 to 5 seconds to reset the system.
39
Problem Solving
Answering System does not work, check the following:
1. BASE UNIT is plugged into the power source.
2. Reset the system by pressing the RESET button at the top side of the BASE UNIT.
Answering System does not answer calls, check the following:
1. ANSWER ON/OFF LED indicator is lit.
Answers calls only after 10 rings, check the following:
1. ANSWER ON/OFF LED indicator is lit.
2. Message Memory is not full.
Does not respond to remote commands, ensure the following:
1. Correct Remote Access Code is entered.
2. A TONE telephone is being used.
Messages are incomplete, ensure the following:
1. Message Memory is not full.
2. Caller may be hesitating and pausing for more than 7 seconds.
Answers calls but does not record messages, check the following:
1. ANNC/ICM switch is set to ICM.
2. Memory is not full.
3. Extension telephone was not picked up.
NOTE:
If none of the telephones in the house are working, disconnect one set at a time to verify
that none of the telephones are causing the problem. If you still have a problem after
doing this, and your telephone still does not work, please contact your local phone
company.
40
Technical Information
Technical Information
This cordless telephone uses radio frequencies to allow mobility. There are certain
difficulties in using radio frequencies with a cordless telephone. While these are
normal, the following could affect the operation of your system.
Noise
Electrical pulse noise is present in most homes at one time or another. This noise is
most intense during electrical storms. Certain kinds of electrical equipment such as
light dimmers, fluorescent bulbs, motors, and fans also generate noise pulses.
Because radio frequencies are susceptible to these noise pulses, you may
occasionally hear them in your HANDSET. Generally they are a minor annoyance and
should not be interpreted as a defect in your system.
Range
Because radio frequency is used, the location of the BASE UNIT can affect the operating
range. Try several locations in your home or office and pick the one that gives you the
clearest signal to the HANDSET.
Interference
Electronic circuits activate a relay to connect the cordless telephone to your telephone
line. These electronic circuits operate in the radio frequency spectrum. While several
protection circuits are used to prevent unwanted signals, there may be periods when
these unwanted signals enter the BASE UNIT. You may hear clicks or hear the relay
activate while you are not using the HANDSET. If the interference occurs frequently, it can
be minimized or eliminated by relocating the BASE UNIT. You can check for interference
before selecting the final BASE UNIT location by plugging in the telephone.
NOTICE:
This cordless telephone uses radio communication between the HANDSET and the
BASE UNIT and may not ensure privacy of communication. Other devices, including
other cordless telephones, may interfere with the operation of this cordless telephone
or cause noise during operation. Units not containing coded access may be accessed
by other radio communication systems. Cordless telephones must not cause
interference to any licensed radio service.
IMPORTANT
When you hear interference, press the DEL/CHAN
button change the operating channel.
41
FCC Requirements
Federal Communications Commission Requirements
This equipment complies with Part 68 of the FCC Rules. A label on the BASE UNIT of
this equipment contains, among other information, the ACTA product number and the
Ringer Equivalence Number (REN) for this equipment. You must, upon request,
provide this information to your telephone company.
The REN is also useful in determining the quantity of devices that you may connect
to your telephone line and still allow these devices to ring when your telephone number
is called. In most areas, but not all, the sum of the RENs for all devices connected to one
line should not exceed five (5.0). To be certain of the number of devices that you may
connect to your line, you should contact your local telephone company.
If your equipment should cause harm to the telephone network, the telephone company
may temporarily disconnect your service. If possible, they will notify you in advance that
temporary discontinuance of service may be required. However, when advanced written
notice is not possible, the telephone company may temporarily discontinue service
without notice if such action is necessary under the circumstances. The telephone
company may make changes in its communication facilities, equipment, operations, or
procedures where such action is reasonably required in the operation of its business
and is not inconsistent with the rules and regulations of the Federal Communications
Commission. Do not attempt to repair or modify this equipment.
WARNING: Changes or modifications not expressly approved by the party responsible
for its compliance could void the user’s authority to operate the equipment.
Some cordless telephones operate at frequencies that may cause interference to nearby
TVs and VCRs. To minimize or prevent such interference, the BASE UNIT of the cordless
telephone should not be placed on or near a TV or VCR. If interference is experienced,
moving the cordless telephone farther away from the TV or VCR will often reduce or
eliminate the interference.
IMPORTANT
Placing your BASE UNIT near appliances
such as televisions, refrigerators, radios, or
microwave ovens may cause interference.
42
FCC Requirements
Federal Communications Commission Requirements (continued)
This equipment should not be used on coin telephone lines. Connection to party line
service is subject to state tariffs. If trouble is experienced, disconnect this equipment
from the telephone line to determine if it is causing the malfunction. If the equipment is
determined to be malfunctioning, its use should be discontinued until the problem has
been corrected.
NOTE: This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures.
1. Reorient or relocate the receiving ANTENNA.
2. Increase the distance between the equipment and the receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
43
Warranty
Warranty Information
BellSouth Products
One-Year Limited Warranty
This limited warranty sets forth all BellSouth Products responsibilities regarding your
product. There are no other expressed or implied warranties from BellSouth Products.
Warranty Service Provided
If you purchased the telephone new from a retail vendor, BellSouth Products warrants
the telephone against defects in material and workmanship for a period of one (1) year
from the original date of purchase. This warranty is in lieu of all other expressed
warranties. This warranty begins when you purchase the telephone and continues for
one (1) year unless you sell or rent the telephone, in which case the warranty stops.
BellSouth Products disclaims any implied warranty, including the warranty of
merchantability and the warranty of fitness for a particular purpose, as of the date of 90
days from your original purchase of the telephone. BellSouth Products assumes no
responsibility for any special, incidental, or consequential damages.
This warranty gives you specific legal rights and you may have other rights which vary
from state to state. Some states do not allow the exclusion or limitations of special,
incidental or consequential damages, or limitations on how long a warranty lasts, so
the above exclusion and limitation may not apply to you.
Warranty Service Not Provided
This warranty does not cover damage resulting from accident, misuse, abuse,
improper installation or operation, lack of reasonable care, unauthorized modification,
the affixing of any attachment not provided by BellSouth Products with the telephone
and/or loss of parts. This warranty is voided in the event any unauthorized person
opens, alters or repairs the telephone. All BellSouth equipment being returned for
repair must be suitably packaged. Telephone companies use different types of
equipment and offer various types of services to customers. BellSouth Products does
not warrant that this telephone is compatible with the type of equipment of any particular
telephone company or the services provided by it.
44
Warranty
What to Do for Warranty Service
During the first thirty (30) days, a defective product is eligible for over-the-counter
exchange at the retailer from whom it was purchased. After thirty (30) days, the defective
product should be returned to the authorized service center. Please allow 2-3 weeks for
the return of your telephone product. The shipping address of the authorized service
center is:
U.S. Electronics CONSUMER CENTER
C/O Southern Bonded Warehouse
7137 Southlake Parkway
Morrow, GA 30260
NOTE: A product received which was not made for BellSouth Products or which is not
defective as determined by our test procedures will not be repaired and will
be returned C.O.D., freight.
To Obtain Warranty Service
•
•
•
Provide proof of the date of purchase within the package.
Prepay all shipping costs to the authorized service center.
Include a return shipping address within the package.
Please retain your sales receipt, the carton, the packing materials, and the printed
material. The original carton is the best shipping container for the telephone should
you have to return it.
For your reference:
Serial number
Date of Purchase
Name of Dealer
Visit Us on the Web:
www.uselectronics.info
Customer Service Telephone Number:
1-800-210-8950
OUTSIDE THE U.S.A. CALL 1-212-242-6978
45
Notes
46
Notes
47
Wall Mount Template
This page serves as a template for attachment of screws to the wall
when mounting this telephone on the wall.
1. Cut out this page.
2. Use this template to determine the distance between screws
when mounting this phone on the wall. The two cross hairs
identify where to attach the screws.
48
IMPORTANT
In order to get maximum life from the HANDSET
BATTERY PACK, be sure to charge the HANDSET
for 12 hours before initial use.
IMPORTANT
Placing your BASE UNIT near appliances
such as televisions, refrigerators, radios, or
microwave ovens may cause interference.
IMPORTANT
When you hear interference, press the DEL/CHAN
button change the operating channel.
IMPORTANT
The AC ADAPTOR must always be plugged
into an electrical outlet.
IMPORTANT
In order to utilize the Caller ID feature, you
must subscribe to Caller ID service from
your local telephone company
IMPORTANT
If you live in an area which receives frequent
thunderstorms, we strongly recommend plugging
your AC ADAPTOR into a surge protector.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 57
Creator                         : C:\UNZIPPED\XG2400~1\XG2400.p65
Create Date                     : 2003:02:26 10:59:18
Title                           : C:\UNZIPPED\XG2400~1\XG2400.PDF
Author                          : marvin
Producer                        : Acrobat PDFWriter 4.0 for Windows

EXIF Metadata provided by EXIF.tools