Lionda Technology Co XG2801DLD03 2.4 GHz 77-Channel DTS Cordless Phone User Manual DSST 2801 A

Lionda Technology Co Ltd 2.4 GHz 77-Channel DTS Cordless Phone DSST 2801 A

Contents

Users Manual Part 1

Multi-HANDSET, Multi-BASE UNIT 2.4GHz Digital Spread Spectrum Technology CORDLESS ALL DIGITAL ANSWERING SYSTEMWITH CALLER ID/CALL WAITING 77 CHANNEL AUTOHOPModel XG2801OWNER’S MANUAL INSTALLATION AND OPERATING INSTRUCTIONSPLEASE READ THISMANUAL CAREFULLYBEFORE USE.KEEP FOR YOURREFERENCE.For installation information,please see “Getting Started”instructions on page 6 or yourseparate Quick Start guide.Visit Us on the Web:www.uselectronics.info© 2002 BellSouth CorporationDSST~2801~A.qxd 1/25/2003 6:45 PM Page 1
Special Features Special Featuresongratulations on your selection of a quality XACT Product. With proper care and adherence to the set-up and user instructions in this Owner's Manual, this unit will provide you with years of trouble-free service. XACT is committed to providing quality products that fit your needs. We would like to have anycomments or suggestions you might have on this product. You may mail your comments to:U.S. Electronics105 Madison AvenueNew York, NY 10016When examining your new XACT cordless telephone, you will find an array of special featuresincluding:Digital Spread Spectrum Technology - Utilizes a “wider frequency band” for a more secureconversation with a clarity of digital sound, extended range, and minimal interference from other cordless telephones.77 Channel Auto-hop - When interference is received, the telephone automatically hops to theclearest channel.Desk or Wall Mount - Use this equipment as a desk phone or as a wall phone.Tone or Pulse Dialing - Use this phone for either TONE (push-button) or PULSE (rotary) dialing.Automated Functions - Redial the last number called and automatic STANDBY mode.Security - Ensures greater privacy because of a built-in security code with 4,000,000 possible combinations that prevents use of your telephone line by another nearby cordless phone.Special Services - Use the button to access special services such as Call Waitingsupplied by your telephone company or company switchboard.STANDBY Mode - When in STANDBY mode (ON-HOOK), the phone is capable of receiving a call.When the HANDSET is on the BASE UNIT, it is automatically in the STANDBY mode (ON-HOOK). When the HANDSET is taken off the BASE UNIT, it remains in the STANDBY modeuntil you activate the button.Battery Power Saver - Recharge your BATTERY PACK many times with the built-in CHARGER.Once fully charged, in STANDBY mode, the HANDSET can receive/send calls for a maximumof five days without the need for recharging. Length of charge depends on frequency of use.Luminous LCD Screen - The LCD Screen emits light for 5 seconds everytime you press any ofthe TELEPHONE KEYPAD buttons.HANDSET Ringer Level - Select the ringer sound level (HI, LOW, OFF).HANDSET Ringer Melody - Select the desired ringer melody from the 10 available melodies. HANDSET Volume Control - Press the /MENU button and then select the desired receiver volume setting from Low, Medium, High, or Maximum.Alarm Clock - The telephone emits a distinctive sound when the ALARM CLOCK function isactivated (See page 27). HEADSET JACK - Your telephone can utilize a headset for hands-free communication.BELT CLIP - Use the BELT CLIP to hang your HANDSET on your belt.EDIT/FLASHTALKCCALLER ID SYSTEMMulti-Function Large LCD Screen - Shows the number you are dialing and, with Caller ID service (available through subscription from your local telephone company), displays information about thecaller before you answer the call.Name and Number DIRECTORY (PHONE BOOK) - Stores up to 40 names and numbers so that you can call them with a single key stroke.Caller List - Available with Caller ID service. Stores up to 50 calls to keep track of everyone who called.The name, phone number, time and date of the call are recorded. Allows you to return their calls witha few key strokes.Outgoing Call Memory - The telephone stores the last 8 OUTGOING CALLS to keep track of everyoneyou called. The phone number, time, date, and the duration of the call are recorded. Allows you to call them again with a single key stroke.Preferred Calls - You can mark the name and number of a welcome caller in the DIRECTORY (PHONEBOOK). When that number calls in, the caller’s name will appear on the LCD Screen and a specialring will sound or a selected PREFERRED RINGER MELODY will be heard.Blocked Calls - You can mark the name and number of an unwelcome caller in the DIRECTORY(PHONE BOOK). When that number calls in, the caller’s name will appear on the LCD Screen andthe ringer will be disabled.Repeat Call Indicator - Shows if a new incoming call has called more than once.Out of Area Call Indicator - Advises you that the incoming call is not in a Caller ID service area.Unavailable Call Indicator - Advises you that the origin of the incoming call does not support the CallerID system. Call Waiting Service - Displays the name and number of the second caller, if you have subscribed toCall Waiting service from your local telephone company (see page 14.)MULTI-HANDSET, MULTI-BASE UNIT SYSTEMMulti-HANDSET - Registers a total of 9 HANDSETS into the operating system. Multi-BASE UNIT -The user can have the option to add another BASE UNIT. The system supports 2BASE UNITS connected to separate telephone lines. Once registered, the HANDSETS can link toeither of the BASE UNITS to make and/or receive a call. Automatic Linking - All 9 HANDSETS can register to the two BASE UNITS (B1, B2). When the FIRSTBASE UNIT (B1) is already engaged, the other HANDSETS can automatically link to theSECOND BASE UNIT (B2) by pressing the button.Intercom Call - A HANDSET can make an INTERCOM call to the other HANDSETS in the system.Call Transfer - During a telephone conversation, the call can be transferrred from one HANDSET toanother HANDSET.Extension Phone Detection - When one HANDSET is connected to a BASE UNIT, the LCD Screenof the other HANDSETS that are linked to the same BASE UNIT will display “Ext in use.”VOLTALKDSST~2801~A.qxd 1/25/2003 6:45 PM Page 2
HANDSET Controls1. LARGE LCD SCREEN11. DIR (DIRECTORY)/ESC (ESCAPE) BUTTON Pg. 15~2015. DEL (DELETE)/INT (INTERCOM) BUTTON Pg. 16, 17, 19, 20, 28, 2912. RE ( REDIAL)/PA (PAUSE) /SAVE BUTTON Pg. 11, 16~19, 21~2713. MESSAGE WAITING LED INDICATOR Pg. 14NEW CALL/10. BATTERY CHARGE INDICATOR Pg. 395. HEADSET JACK Pg. 124. MENU/VOL (VOLUME) BUTTON Pg. 11, 21~276. TELEPHONE KEYPAD Pg. 17~19, 21~298. FLASH BUTTON Pg. 14, 17~19, 21~27EDIT/16. CHARGE CONTACTS2. SCROLL UP-DOWN/SHIFT LEFT-RIGHT BUTTON Pg. 11, 13, 15~25, 273. TALK BUTTON Pg. 7, 8, 10, 11, 14, 15, 19, 21, 28, 29, 41 Pg. 20, 22, 27 714. #/OPTION BUTTON Pg. 15, 19, 209.HANDSET ANTENNA3. Button: Press to answer an incoming call or to place a call. Press to end a call.HANDSET Controls1. Large LCD Screen: Shows call information, phone status, prompts, and DIRECTORY (PHONE BOOK) items. large LCD Screen.TALKSpecial FeaturesANSWERING SYSTEM FEATURESFully Digital Answering System - Provides a full range of answering functions without usingcassette tapes. Digital Memory - Allows recording of memos and messages.Two-Digit LED Message Display - Indicates the number of messages, indicates the status ofthe system.Ring-Detection Selectable- Choose the number of times the telephone rings before the systemanswers.Voice Day/Time Stamp - System tells the day and time of each received message or recordedmemo.Message Alert - The ability to generate a sound signal when new messages are recorded.Call Screening - The ability to intercept a call when the unit is recording an incoming message(ICM).Mailboxes - Allows four separate individuals to receive their own incoming messages.Auto Disconnection - Will automatically stop answering when the HANDSET of any phone onthe same line goes OFF-HOOK. Fast Message Skip Function - Skips to the next message.SPEAKERPHONE FEATURESpeakerphone - This telephone allows you to answer calls using the BASE UNIT through thespeakerphone function. DSST~2801~A.qxd 1/25/2003 6:45 PM Page 4
BASE UNIT Controls11. OGM BUTTON Pg. 31, 3219. MEMO BUTTON Pg. 33, 3510. ERASE BUTTON Pg. 3512. TIME BUTTON Pg. 309. ANSWER FUNCTION ON/OFF BUTTON Pg. 3218. CODE BUTTON Pg. 3622. SPEAKERPHONE BUTTON Pg. 3821. LED MESSAGE DISPLAY Pg. 32, 34, 3517. REPEAT BUTTON Pg. 30, 34, 368. PLAY BUTTON Pg. 3413. SKIP BUTTON Pg. 30, 34, 361. VOLUME + (UP) BUTTON Pg. 387. MAILBOX LED INDICATORS Pg. 31~344. MAILBOX 3 BUTTON 5. MAILBOX 2 BUTTON 6. MAILBOX 1 BUTTON3. MAILBOX 4 BUTTON 23. STOP BUTTON Pg. 32, 3425. ANNOUNCE ONLY/ INCOMING MESSAGE SWITCH Pg. 32, 4226. MESSAGE ALERT SWITCH Pg. 3327. RINGER ON/OFF SWITCH 28. RING SELECT SWITCH Pg. 3332. POWER-IN CONNECTION JACK Pg. 6, 730. TELEPHONE LINE CONNECTION JACK Pg. 6, 7, 9, 4131. RESET BUTTON Pg. 30, 4224. TONE-PULSE SELECT SWITCH Pg. 7, 41 RUSE ONLY WITH CLASS 2 POWER SOURCETEL LINETS 5R 3RRING SELECTRESET ON OFFRINGER ICM ANNCSELECT ON OFFMSSG ALERT TONE/PULSEDATAM1VOL+VOL-PAGESTOPSPKPLAYM2M3M4ON/OFFANSOGMTIMESKIP RPTCODEMEMOANSON/OFFIN USE SPKERASEBUTTON Pg. 382. 16. SPEAKERPHONE LED INDICATOR 14. IN USE/ CHARGE LED INDICATOR 15. ANSWER FUNCTION ON/OFF LED INDICATOR PG. 32, 42 29. DATA CONNECTION JACK4. /MENU Button: (VOLUME) During TALK mode, press to adjust the receiver volume to a comfortable listening level. (MENU) Press to access the special functions operation inSTANDBY mode. (For special functions see pages 21~27.) 5. HEADSET JACK: For connecting your headset plug to enjoy hands-free communication. (See page 12 for detail.)6. TELEPHONE KEYPAD to Buttons: Allows you to make a call depending on pressed button. (For TELEPHONE KEYPAD characters, see page 18.)7. TEMPORARY TONE Button: Press to temporarily change the DIALING mode from PULSE to TONE for Rotary Service Users. (Press once before entering numbers to accessthe answering system or electronic banking services, etc.)8. Button: (EDIT) Press to edit listed items. (FLASH) Press to answer a call if youhave Call Waiting.9. HANDSET ANTENNA 10. NEW CALL/MSG WTG (MESSAGE WAITING) LED Indicator: (NEW CALL) Blinks RED toindicate that you have a new Caller ID call stored in memory. (MESSAGE WAITING) BlinksGREEN when receiving a Message Waiting signal, if you have subscribed to a Voice Mail message service from your local telephone company. (See page 14.)11. BATTERY CHARGE INDICATOR: Indicates the battery charge condition as:- Battery Full (4 bars shown)- Low Battery Level (2 bars blinking). See page 39 for detail.- Battery Charging (4 bars progression)12. DIRECTORY (PHONE BOOK) Button: Press to access names and numbers stored in the DIRECTORY (PHONE BOOK). (See pages 16 to 20 for details.)13. /RE (REDIAL)/PA (PAUSE) Button: (SAVE) Press and hold down to save the changes on the listed items. (REDIAL) Press to redial the last number you dialed. (PAUSE)Press to insert a pause while dialing. (You will need the /RE/PA button to dial numbers which use an alternative Long Distance Access Code.)14. /OPTION Button: (OPTION) Press to change the displayed telephone number to 7, 10, or 11 digit DIALING mode during Caller ID callback. 15. (DELETE/INTERCOM) Button: (DELETE) - Press and hold down to delete itemsor individual characters. (INTERCOM) Press to make an INTERCOM CALL to another HANDSET.16. CHARGE CONTACTS: For charging the BATTERY PACK inside the HANDSET. We recommend cleaning the CHARGE CONTACTS periodically with a damp cloth. 1 0*EDIT/FLASHDIRSAVE#DEL/INTVOLSAVEHANDSET ControlsDSST~2801~A.qxd 1/25/2003 6:46 PM Page 6
1. Button: Press and hold down to record memo messages.2. Button: Press to set/check the day and time.3. (OUTGOING MESSAGE) Button: Press and hold down to record OGM messages.4. Button: Press to erase messages. 5. CHARGE TERMINALS: For charging the HANDSET BATTERY PACK. For best performance, clean the CHARGE TERMINALS periodically with a damp cloth. 6. SPEAKERPHONE LED Indicator: Lights up when the BASE UNIT speakerphone functionis activated. 7. IN USE/CHARGE LED Indicator: (IN USE) Lights up to indicate that the HANDSET is in TALK mode. (CHARGE) Lights up when the HANDSET is placed on the BASE UNIT forcharging. 8. ANSWER FUNCTION ON/OFF (ANS. ON/OFF) LED Indicator: Lights when the answer function is turned ON.9. MICROPHONE10. (ANSWER FUNCTION ON/OFF) Button: Press to activate or deactivate the answer function.11. Button: Press to PAGE the HANDSET. Press again to stop.12. Button: Press and hold to set the 3-digit Remote Access Code for remote operation.13. MESSAGE ALERT: Set switch to ON to generate a “beep” sound every 12 seconds when anew message has been received.14. ANNOUNCE ONLY/INCOMING MESSAGE Switch:ICM - System records the incoming messages.ANNC - System plays your announcement and then hangs up without recording messages.15. RINGER ON/OFF Switch: Set switch to OFF position to disengage the ringer on the BASEUNIT.16. RING SELECT Switch: To select the number of rings before the Answering System answersa call.3R - System answers a call after the third ring.5R - System answers a call after the fifth ring.TS (TOLL SAVER) - System answers after the third ring only if you have new messages. Otherwise, the system will answer after the fifth ring.17. (MAILBOX 1) Button: Press to activate functions for MAILBOX 1.MEMOBASE UNIT Controls BASE UNIT Controls18. (MAILBOX 2) Button: Press to activate functions for MAILBOX 2.19. (MAILBOX 3) Button: Press to activate functions for MAILBOX 3.20. (MAILBOX 4) Button: Press to activate functions for MAILBOX 4.21. BASE UNIT ANTENNA22. MAILBOX LED Indicators: Lights to indicate the presence of message(s) and blinks to indicate that the corresponding MAILBOX is active and ready to operate.23. Button: Press to stop playing a message. 24. (VOLUME UP) Button: Press repeatedly to increase the speaker volume level of the BASE UNIT.25. (VOLUME DOWN) Button: Press repeatedly to decrease the speaker volume level of the BASE UNIT.26. Button: Press to play messages.27. Button: Press to skip messages. 28. LED MESSAGE DISPLAY: Indicates the number of memos/messages received, status of the system.EA - Erasing 01~63 - No. of memos/messages OP - OGM is playingAo - Announce Only FU - Memory is full PA - PauseSP - Speakerphone function is being used29. Button: Press to repeat messages.30. (SPEAKERPHONE) Button: Press to answer a call using the BASE UNIT.31. TONE-PULSE SELECT SWITCH32. RESET Button: Press and hold down for 2 seconds to reset the system and clear all recordings.33. POWER-IN CONNECTION JACK34. TELEPHONE LINE CONNECTION JACKTIMEOGMERASEANSON/OFFPAGECODEMAIL1MAIL1MAIL3MAIL4STOPVOL+VOL-PLAYSKIPRPTSPKDSST~2801~A.qxd 1/25/2003 6:46 PM Page 8
Forwarded Calls.................................................................................................... 20Function Settings...................................................................................................21A. Setting the Ringer Level............................................................................. 22K. Registering the HANDSET/S......................................................................27G. Changing the Language.............................................................................25E. Adjusting the Contrast................................................................................ 24C. Turning the First Ring ON or OFF.............................................................. 23I. Deleting Message Waiting Indication........................................................... 26J. Setting the Area Code.................................................................................26B. Setting the Ringer Melody...........................................................................23D. Setting the Time and Date..........................................................................23F. Setting the PBX Number............................................................................. 24H. Changing the User Name...........................................................................252Long Distance Calls.............................................................................................. 20Outgoing Calls.......................................................................................................21L. Setting the Alarm Clock.............................................................................. 27Muti-HANDSET, Multi-BASE UNIT System Operation...................................................28Intercom Call.............................................................................................................28Answering System Operation......................................................................................... 30Contents Contents Safety Instructions .......................................................................................................... 4Getting Started.................................................................................................................6Desk Mounting ................................................................................................................9Wall Mounting.................................................................................................................. 9Cordless Telephone Operation........................................................................................ 10Message Waiting...................................................................................................14Caller ID System Operation.............................................................................................13Name and Telephone number DIRECTORY (PHONE BOOK)..................................17Redial Feature............................................................................................................11Deleting a Single Record...................................................................................... 16Receiving Calls...........................................................................................................10Placing a Call from the Caller List ........................................................................15Caller List ...................................................................................................................14Viewing Caller Information During Incoming Calls...............................................13Caller ID with Call Waiting.....................................................................................14Preparing for Use....................................................................................................... 10Placing Calls...............................................................................................................11Viewing the Caller List ..........................................................................................15Storing Caller ID Records into the DIRECTORY (PHONE BOOK)..................... 16Deleting all Records..............................................................................................16Using the Headset Feature.........................................................................................12Viewing the DIRECTORY (PHONE BOOK).........................................................17Telephone Keypad Characters..............................................................................18Caller ID System.........................................................................................................13Storing Phone Numbers........................................................................................17Placing Calls from the DIRECTORY (PHONE BOOK).........................................19Editing a Stored Number in the DIRECTORY (PHONE BOOK)...........................19Deleting a Stored Record in the DIRECTORY (PHONE BOOK)..........................201Preferred Calls ..................................................................................................... 20HANDSET Volume Control.........................................................................................11Extension In Use Indicator..........................................................................................12Blocked Calls ........................................................................................................20Setting the Day/Time Stamp.....................................................................................30Recording your Outgoing Messages........................................................................ 30Turning the Answering System ON/OFF...................................................................32Setting to Answer Calls............................................................................................ 32Setting to Announce Only.........................................................................................32Message Alert...........................................................................................................33Setting Ring Select...................................................................................................33Recording a Memo................................................................................................... 33Playing of Messages/Memos....................................................................................34Saving Mesages.......................................................................................................34Erasing Messages.................................................................................................... 35Receiving a Call while in Intercom Call.................................................................28Transfer Call............................................................................................................. 29DSST~2801~A.qxd 1/25/2003 6:46 PM Page 10
Safety InstructionsContents4IMPORTANT SAFETY INSTRUCTIONSTo reduce the risk of fire, electric shock and/or injury, always follow thesebasic safety precautions when using your cordless telephone equipment.1. Read and understand all instructions.2. Follow all warnings and instructions marked on the telephone.3. Do not use this telephone near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, near a swimming pool, or anywhere else where there is water.4. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 5. Do not use the telephone to report a gas leak in the vicinity of the leak.6. Use only the power cord and BATTERY PACK indicated in the Owner’s Manual. Do not dispose of the BATTERY PACK in a fire. The BATTERY PACK may explode. Check with local codes forpossible special disposal instructions. 7. Operate this telephone using the electrical voltage as stated on the BASE UNIT or in the Owner’s Manual. If you are not sure of the voltage in your home, consult your dealer or local power company.8. Unplug this telephone from the wall outlet before cleaning or replacing the BATTERY PACK. Do not use liquid cleaners or aerosol cleaners on the telephone. Use a damp cloth for cleaning.9. Place this telephone on a stable surface. Serious damage and/or injury may result if the telephone falls.10. Do not cover the slots and openings on this telephone. This telephone should never be placed near or over a radiator or heat register. This telephone should not be placed in a built-in installation unless proper ventilation is provided.11. Do not place anything on the power cord. Install the telephone where no one will step or trip on the cord.12. Do not overload wall outlets or extension cords as this can increase the risk of fire or electric shock.13. Never push any objects through the slots in the telephone. They could touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the telephone.14. To reduce the risk of electric shock, do not take this telephone apart. If service or repair work is required on this telephone, take it to a qualified service representative. Opening or removing covers may expose you to dangerous voltage or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. 15. Unplug this telephone from the wall outlet and consult a qualified service representative in any of the following situations.A. When the power supply cord is frayed or damaged.B. If liquid has been spilled into the telephone.C. If the telephone has been exposed to rain or water.D. If the telephone does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment may require extensive work by a qualified technician to restore the telephone to normal operation.FCC Requirements..........................................................................................................44Problem Solving...............................................................................................................41Recharging the BATTERY PACK.....................................................................................39Changing the BATTERY PACK........................................................................................40Technical Information............... .......................................................................................43Warranty Information............... ....................................................................................... 46Security............................................................................................................................ 38Wall Mount Template....................................................................................................... 50Two-Way Recording..................................................................................................35Remote Operation through a Tone Telephone......................................................... 36Remote Access Codes.............................................................................................36Changing of the Remote Access Codes.................................................................. 36Using the Remote Instruction Code..........................................................................373When the Memory is Full..........................................................................................35Speakerphone Operation.................................................................................................38DSST~2801~A.qxd 1/25/2003 6:46 PM Page 12
Safety Instructions Getting Started Connecting Your PhoneThis section is a reference guide to the basic functions and operations of your cordless telephone. For more detailed descriptions of the operations and features of this telephone, refer to the Contents on page 1.1. Carefully remove your cordless telephone from its shipping carton. If there is any visibledamage, do not attempt to operate this equipment. Return it to the place of purchase.2. Check to be sure you have all items that come with this cordless telephone system. You should have a HANDSET, BASE UNIT, AC ADAPTOR, BATTERY PACK, MOUNTINGBRACKET, TELEPHONE LINE CORD, SHORT TELEPHONE LINE CORD, BELT CLIP, and Owner’s Manual.3. Insert the small plug on the end of the AC ADAPTOR into the POWER-IN CONNECTION JACK at the back of the BASE UNIT.4. Plug the AC ADAPTOR into a 120V AC wall outlet.USE ONLY WITH CLASS 2 POWER SOURCE:9V DC, 500mA for the BASE UNIT.9V DC, 150mA for the CHARGER UNIT.5. Insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE JACK and the other end into the TELEPHONE LINE CONNECTION JACK at the back of the BASE UNIT. (If you have an older 4-prong TELEPHONE JACK, you will need an RJ-11C TELEPHONE JACK ADAPTOR. This adaptor is available at the same place you purchased yourtelephone.)6. We recommend not placing this unit next to appliances. Doing so may cause interference.6E. If the telephone has been dropped or the case has been damaged.F. If the telephone exhibits a distinct change in performance.16. Never install telephone wiring during a lightning storm.17. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.18. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.19. Use caution when installing or modifying telephone lines.Battery SafetyCAUTION:Danger of explosion if BATTERY PACK is incorrectly replaced. Replaceonly with the same or equivalent type. To reduce the risk of fire or personal injury, read and follow these instructions:1. Use only the following type and size of BATTERY PACK:Cordless Telephone BATTERY PACK3.6V, 800mAhU.S. Electronics Inc.Ni-Cd BATTERY PACK: model B658(See page 39 for ordering information.)2. Do not dispose of the BATTERY PACK in a fire. It may explode. Check with local codes for possible special disposal instructions.3. Do not open or mutilate the BATTERY PACK. Released electrolyte from a BATTERY PACK is corrosive and may cause damage to the eyes or skin. Electrolyte may be toxic if swallowed.4. Exercise care in handling the BATTERY PACK to prevent shorting the BATTERY PACK with conductive materials such as rings, bracelets, and keys. The BATTERY PACK or conductor may overheat and cause burns.5. Charge the BATTERY PACK provided with (or identified for use with) this telephone only in accordance with the instructions and limitations specified in this manual.6. Observe proper polarity orientation between the BATTERY PACK and BATTERY CHARGER.SAVE THESE INSTRUCTIONSATTENTION:The telephone that you have purchased contains a rechargeable BATTERY PACK. The BATTERY PACK is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this BATTERY PACK into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal. 5For XG2801EX model, the package comeswith model HCB702 that includes the followingitems: HANDSET, CHARGER, CHARGER ACADAPTOR, BATTERY PACK, and BELT CLIP.SHORT TELEPHONE LINE CORDHANDSETTELEPHONE LINE CORDAC ADAPTORBASE UNITBATTERY PACKBELT CLIPHANDSETAC ADAPTORBATTERY BELT CHARGERDSST~2801~A.qxd 1/25/2003 6:46 PM Page 14
8Press the button to confirm that you have adial tone. If you do not get a dial tone, review steps3 through 11. If you still do not have a dial tone,refer to the Problem Solving section on pages41~42.TALKBelt Clip InstallationWith the back of the HANDSET facing up, insertone side of the BELT CLIP HOOK into the matching slot at the top side of the HANDSET.Press down on the opposite side of the BELT CLIPuntil the other hook locks into the slot on the sideof the HANDSET.You are now ready to use your newBellSouth Cordless Telephone.IMPORTANTIn order to utilize the Caller ID feature, youmust subscribe to Caller ID service fromyour local telephone company.BELT CLIP HOOK79. Slide the HANDSET BATTERY COMPART-MENT COVER firmly into place in its closedposition.10. IMPORTANT: Before initial use, charge theHANDSET for 12 hours. 11. TONE/PULSE Select Switch:A. If your home is equipped with a tone dialing system, set the TONE/PULSE Select Switch to the TONE position.B. If you have a rotary dialing system, set the TONE/PULSE Select Switch to the PULSE position.C. If you are not sure which system you have, set the TONE/PULSE Select Switchto the TONE position. Press the button on the HANDSET to get a dial tone, and press any button on the TELEPHONE KEYPAD except the zero. If the dial tone continues, it means that you do not have TONE dialing service. Pressthe button on the HANDSET to hang up. Set the TONE/PULSE Select Switch to the PULSE mode and then try again.TALKTALK12. Set the date and time on the HANDSET. (See page 23 for details.)13. Set the date and time on the BASE UNIT. (See page 30 for details.)7. Install the HANDSET BATTERY PACK by plugging it into the BATTERY CONNECTOR inside the BATTERY COMPARTMENT. 8. Place the BATTERY PACK inside the BATTERY COMPARTMENT.RUSE ONLY WITH CLASS 2 POWER SOURCETEL LINETS 5R 3RRING SELECTRESET ON OFFRINGER ICM ANNCSELECT ON OFFMSSG ALERT TONE/PULSEDATAAC ADAPTORTELEPHONE LINE CORDTELEPHONEJACK120V WALLOUTLETTONE/PULSESELECT SWITCHPOWER-INCONNECTION JACKTELEPHONE LINECONNECTION JACKBATTERY PACKBATTERY COMPARTMENTCOVERGetting Started Getting Started DSST~2801~A.qxd 1/25/2003 6:46 PM Page 16
Cordless Telephone Operation10Preparing for UseBefore you can use your cordless telephone, you must charge the HANDSET for 12 hours.Failure to do so will require recharging of the BATTERY PACK more often. 1. Place the HANDSET on the BASE UNIT for 12 hours.2. After 12 hours, remove the HANDSET from the BASE UNIT.Before you can use your cordless telephone, you must charge the HANDSET for 12 hours. Failure to do so will require more frequent charging of the BATTERY PACK. See page 39 for more information on the BATTERY PACK.NOTE:Depending on the frequency of use, once the HANDSET is fully charged, it remains functional for approximately 4 hours of continuous use and approximately 5 days when theHANDSET is off the BASE UNIT in STANDBY mode. 1. When the phone rings, the LCD Screen of all of the HANDSETS registered to the system will display “Ring.” If you have Caller ID, the LCD Screen will display the Caller ID information after the first ring.2. With the HANDSET on or off of the BASE UNIT, pressthe button. “Talk” will be displayed and the CallTimer starts to count. Start your conversation.3. To end your conversation, either press the button or place the HANDSET on the BASE UNIT.The duration of the call will be displayed on the LCDScreen for about 3 seconds and then returns to the STANDBY mode. TALKTALKReceiving CallsWhen a call is received, all of the HANDSETSregistered to the system will ring with the RINGERLEVEL and MELODY selected by the user. The first HANDSET to respond will get the call. NOTE:If you are too far away from the BASE UNIT, the HANDSET emits “beep” sounds to warn youthat the background noise level is too high for proper communication between the HANDSETand the BASE UNIT. When you hear this sound, you should move closer to the BASE UNIT toreduce the noise level. Otherwise, the call will automatically cut off.MinutesSeconds9Desk MountingFor normal position, place the BASE UNIT on any desired but suitablelocation.Wall MountingYou may choose to put the BASE UNIT of your cordless telephone on a wall.1. With the back of the BASE UNIT facing up, connect the SHORT TELEPHONE LINECORD to the TELEPHONE LINE CONNECTION JACK. 2. Insert the free end of the SHORT TELEPHONE LINE CORD through the hole of theMOUNTING BRACKET.3. Insert the OUTER HOOKS of the MOUNTING BRACKET into the matching slots on theback of the BASE UNIT.4. Push the MOUNTING BRACKET upward until the LOCKING HOOKS snaps into theinner slots of the BASE UNIT. 5. Plug the free end of the SHORT TELEPHONE LINE CORD into the MODULAR WALLJACK. 6. Align the upper keyhole of the MOUNTING BRACKET with the upper stud of the wallplate, so that the opening end of the MOUNTING BRACKET matches the lower stud,then pull the BASE UNIT down until it is securely seated.Desk Mounting DSST~2801~A.qxd 1/25/2003 6:46 PM Page 18
Cordless Telephone Operation12Using the Headset FeatureYour HANDSET, when connected to a headset (notincluded), will provide you with hands-freecommunication. Pull out the HEADSET JACK COVER then insert thesmall plug on the end of the headset into the HEADSETJACK on the left side of the HANDSET. Follow the procedures discussed in “Receiving Calls” and “PlacingCalls” to receive and place a call. NOTE:When you plug the headset plug into the HEADSETJACK it automatically mutes the MICROPHONE andSPEAKER of the HANDSET. Unplug the headset toreturn the HANDSET to normal use. Headsets are available at most retail outlets that selltelephone equipment. The HEADSET JACK is compatible with 2.5 mm headset plugs only. MICROPHONEHEADSETSPEAKERHEADSET JACKHEADSET JACKCOVERHEADSET PLUG (2.5mm)IMPORTANTIn order to utilize the Caller ID feature, youmust subscribe to Caller ID service fromyour local telephone company.Extension In Use IndicatorThis telephone can detect when a HANDSET is alreadyin use. The LCD Screen of all of the HANDSETS linkedto the same BASE UNIT will display “Ext in-use.” Thismeans you will have to wait until the line is free to makea call.11Placing Calls1. Press the button. “Talk” will display and the CallTimer starts to count. 2. Wait until you hear a dial tone and then dial the phone number.3. When you have finished your call, press the but-ton again or place the HANDSET on the BASE UNIT.The duration of the call will be displayed on the LCDScreen for about 3 seconds. OR1. Dial the phone number.2. Press the button. The number displayed will bedialed.3. When you have finished with your call, press the button again or place the HANDSET on the BASE UNIT. The duration of the call will be displayed on theLCD Screen for about 3 seconds. HANDSET Volume Control1. To adjust the HANDSET receiver volume level whilehaving a conversation, press the /MENU button.The LCD Screen will display “volume setting.” 2. The default setting is “Low.” Press the SCROLL UP or DOWN button, or press the TELE-PHONE KEYPAD to button to select thedesired setting from Low, Medium, High or Maximum.Redial Feature1. If you get a busy tone, press the button or placethe HANDSET on the BASE UNIT to hang up.2. Later, press the button again.3. Listen for a dial tone.4. Press the /RE/PA button. This will automati-cally redial the last telephone number you called.5. When you have finished with your call, either press thebutton again or place the HANDSET on theBASE UNIT. 1, 2, 54TALKTALKTALKTALKTALKTALKTALKSAVEVOL1 4Cordless Telephone OperationDSST~2801~B.qxd 1/25/2003 7:03 PM Page 2
14Caller ID with Call WaitingWhen you subscribe to Call Waiting service from your local telephone company, this telephone will display a flashing name and number of the second caller while you are having a phone conversation with your first caller.When a new call comes in while you are talking, you will hear a notification beep fromthe HANDSET and the volume is momentarily muted. The new caller’s name and phone number, if available, appears on the LCDScreen.1. When you receive a “Call Waiting” call and you want to connect the call, press thebutton and start talking with the second caller. The active call will be placed on hold. 2. Press the button to alternate between calls.3. Press the button or place the HANDSET on the BASE UNIT to end the call.EDIT/FLASHSecondCallerFirstCallerTALK“MSG Waiting” (Message Waiting)The Message Waiting LED indicator will blink green whenthere is a message for you from your telephone companyif you have subscribed to Voice Mail message service andif you have requested Visual Message Indication from yourlocal telephone company. “Msg waiting” will appear onthe LCD Screen in STANDBY mode. (To remove the MSG WAITING indicator, see page 26 for detail.)EDIT/FLASHNote: This function requires voice mail subscription from the local telephone company. Furthermore, the local phone company must provide a type of voice mail signaling called “FSK” (Frequency Shift Key). Not all telephone companies have the visual message waiting feature available. Please contact your local telephone company to check if this is available in your area.Caller ListThis phone automatically stores the last 50 calls received. It records call information such asthe caller’s name and telephone number together with the date and time of the call. The NEW CALL LED indicator will blink red to indicate thatyou have a new Caller ID call stored in memory. Also, “New call:_ _” will be diplayed on the LCD Screen with “_ _”being the number of new calls that have not been reviewed.Caller ID System Operation13Caller ID SystemThis telephone automatically displays an incoming caller’s name and telephone number together with the date and time of the call. It records up to 50 calls and stores the data in Memory. IMPORTANT: You must subscribe to the Caller ID service from your local telephone company toutilize this feature.Viewing Caller Information During Incoming Calls1. When there is an incoming call, the name and the telephone number of the caller will automatically appear after the first ring. If the name has more than 14 characters, thefirst 14 letters will be displayed first. Press the SHIFT LEFT button to view all the following letters.OR Caller’s telephone number will appear if the caller’s name is not available.OR “Unavailable” will appear when Caller ID information is not available. The origin of the call does not support the Caller ID system (including international calls).OR“Data error” will appear when the Caller ID informationwas received incorrectly or only part of the data wasreceived.NOTE: When an error is received, none of the data from this call is saved in memory. OR“Private” will appear if the caller’s name and/or telephone number is blocked.OR“Msg waiting” will appear when a Voice Mail Message has been received and is stored by the Message Waitingservice provided by the telephone company.Caller ID System OperationDSST~2801~B.qxd 1/25/2003 7:03 PM Page 4
16Storing Caller ID Records into the DIRECTORY (PHONE BOOK)1. When viewing the Caller ID List, press the SCROLL UP or DOWN button tofind the record you wish to store into the DIRECTORY (PHONE BOOK).2. Press and hold the /RE/PA button.3. The LCD Screen will display “Saved.”4. If you wish to edit the newly stored number, edit it in the DIRECTORY (PHONE BOOK) (page 19, “Editing a Stored Number”).5. Press the button to return to STANDBY mode.Deleting Caller ID RecordsWhen viewing the Caller ID List you can delete a single call record or all of the call records.Deleting a Single Record1. Press the SCROLL UP or DOWN button to find the record you wish to delete.2. Press the button. The LCD Screen will display “Erase item?”3. To delete the record, press the button again. The LCD Screen will display the preceeding Caller ID record.4. Press the button to exit the Caller ID list.Deleting All Records1. Press the SCROLL UP or DOWN button. 2. Press and hold the button. The LCD Screen will display “Erase all?”3. To delete all of the Caller ID records, press the button again. The LCDScreen will return to STANDBY mode.NOTE: The user can cancel the deleting step by pressing the button. SAVEDEL/INTDIR/ESCDIR/ESCDEL/INTDEL/INTDEL/INTDIR/ESCCaller ID System Operation15Viewing the Caller List 1. With the HANDSET in STANDBY mode, press theSCROLL UP or DOWN button. The LCDScreen will display “Incoming call,” press the SCROLL UP or DOWN button again to display theCaller ID records. 2. Any unviewed (new) calls will be displayed first. Theinformation on the call will be displayed with the name, number, date, and time that the call was received.3. Pressing the SCROLL DOWN button will go throughthe calls from the last call received to the first Caller ID record. Pressing the SCROLL UP button will allow you to view the calls from the first call received to thelast.4. If the name has more than 14 characters, the first 14 letters will be displayed first. Press the SHIFT LEFT button to view all the following letters. 5. Press the button to return to STANDBY mode.Placing a Call from the Caller ListYou can place a call from the Caller list by using the Caller ID CALLBACK feature.1. When viewing the Caller ID List, press the SCROLL UP or DOWN button tofind the record you wish to call back.2. Press the /OPTION button to change the displayed number to 7, 10, or 11 digits.The first dialing option displayed is the 11 digits for a long distance call.Press the /OPTION button for the second time, the displayed number will change to 7 digits for a local call.Press the /OPTION button for the third time, the displayed number will change to 10 digits for a local call with area code.##3. Press the button to dial the displayed number. Press the button to cancel and return to STANDBY mode. 4. To end a call, either press the button or place the HANDSET on the BASE UNIT.DIR/ESC TALKTALK#First press.Second press.Third press.Caller ID System OperationDIR/ESCDSST~2801~B.qxd 1/25/2003 7:03 PM Page 6
1SpaceCaller ID System Operation18Telephone Keypad CharactersThe TELEPHONE KEYPAD buttons are used to enter characters when entering names and numbers. Press the appropriate TELEPHONE KEYPAD button to get the following characters. You can store a maximum of 18 characters on the letter icon and a maximum of 22 digits on the number icon. EXAMPLE: If you want to enter the name “ALEX” with telephone number “2426978,” dial this sequence:1. Press the button. The LCD Screen will display “Phone book.” 2. Press the button to create a new DIRECTORY (PHONE BOOK) entry.3. Press the following TELEPHONE KEYPAD buttons to get the desired letters:4. Press the SCROLL DOWN button to move the cursor to the number icon.5. Press the TELEPHONE KEYPAD to buttons to get the desired numbers:6. Press and hold the /RE/PA button to store the data in the DIRECTORY (PHONE BOOK) memory.TELEPHONE KEYPAD BUTTON 2555 33 99LETTER ALE XSAVEDIR/ESCEDIT/FLASHKeypadButtons 1stPress 2ndPress 3rdPress 4thPress 5thPress 6thPress 7thPress 8thPress 9thPress12ABC ab c 2 AB3DEF de f3DE4GHI gh i4GH5 J KLjk l5JK6MNO mn o6MN7PQR Sp qrs78TUVtu v8TU9WXY Zw x y z900 0 0 0 0 0 0 0 0 ** * * * * * * * * ## # # # # # # # # 1 0‘&( ) .Space 117Name and Telephone Number DIRECTORY (PHONE BOOK)This DIRECTORY (PHONE BOOK) lets you scroll through the list to find the person you need for onetouch dialing. You can store up to 40 names and telephone numbers in the Memory.Viewing the DIRECTORY (PHONE BOOK)1. Press the button. The LCD Screen will display “Phone book.”2. Press the TELEPHONE KEYPAD ( /ABC to/WXY) button that corresponds to the first letterof a Caller’s name (a triple “beep” will sound if no entriesare stored under those letters). Press the SCROLL UP or DOWN button to find the record you wishto view.3. If the name has more than 14 characters, the first 14 letters will be displayed first. Press the SHIFT LEFTbutton to view all the following letters and/or . 4. Press the button to exit the DIRECTORY (PHONEBOOK). Storing Phone Numbers1. With the HANDSET in STANDBY mode, press thebutton.The LCD Screen will display “Phone book.”2. Press the button to create a new DIRECTORY(PHONE BOOK) entry. 3. Enter the name you wish to store using the TELE-PHONE KEYPAD /ABC to /WXY buttons to enter the name, (see page 18 for detail) you can store up to 18 letters. To move the cursor to the right, create a space, or to enter a new letter, press the SHIFT RIGHTbutton. 4. Press the SCROLL DOWN button, and dial the telephone number you wish to store using the TELE-PHONE KEYPAD to buttons. You can storeup to 22 digits. Briefly press the /RE/PA button toinsert a pause into the number.5. Press and hold the /RE/PA button to store the number into memory.DIR/ESCDIR/ESCSAVESAVE2910EDIT/FLASHDEL/INT2 9NOTES: 1. If there are no memory locations left in the speed dial DIRECTORY (PHONE BOOK) the LCD Screen will display “Memory full.” To continue with memory programming, you must delete or edit existing speed dial numbers.2. If you mis-type entering the phone number, you can move through the number and edit it by pressing the SHIFT RIGHT or LEFT button. To delete a character or number inside the cursor, press the button.DIR/ESCCaller ID System OperationDSST~2801~B.qxd 1/25/2003 7:03 PM Page 8
20Deleting a Stored Record in the DIRECTORY (PHONE BOOK)1. Press the button. The LCD Screen will display “Phone book.”2. Press the SCROLL UP or DOWN button to find the record you wish to delete.3. Press the button. The LCD screen will display “Erase item?”4. To delete the record, press the button again. The LCD Screen will display thepreceeding Caller ID record.5. Press the button to return to STANDBY mode.PREFERRED CALLSYou can assign stored numbers a PREFERRED CALL status. When an incoming call ismatched to a stored number designated as PREFERRED, the phone will generate a special ringer sound or play the RINGER MELODY assigned by the user after the Caller ID information is received.When you are saving the name and number into the DIRECTORY (PHONE BOOK), add a “#” symbol at thebeginning of the name by pressing the button. BLOCKED CALLSYou can assign stored numbers a BLOCKED CALL status. When an incoming call is matched to a stored number designated as blocked, the phone will not ring after the Caller ID information is received.When you are saving the name and number into the DIRECTORY (PHONE BOOK), add an “*” symbol at thebeginning of the name by pressing the button. DIR/ESCDEL/INTDEL/INTDIR/ESC#*To assign a RINGER MELODY, add a “#” symbol followed by the desired RINGER MELODY number (1~0) at thebeginning of the name. To hear a sample of the RINGERMELODY sound, see page 23 for details. “C-F” (Forwarded Call)The “CF” icon pops-up on the LCD Screen, when the incoming call has been assigned to your telephone number and the service is provided by your local telephone company.“L-D-C” (Long Distance Call)The “LDC” icon pops-up on the LCD Screen, when the incoming call is a long distance call and the service is provided by your local telephone company.Caller ID System Operation19Placing Calls from the DIRECTORY (PHONE BOOK)1. Press the button. The LCD Screen will display “Phone book.” 2. Press the SCROLL UP or DOWN button to find the record you want to call.ORPress a TELEPHONE KEYPAD ( /ABC to /WXY) that corresponds to the first letter of a name. Press the SCROLL UP or DOWN button to find the record you wish to call.3. Press the /OPTION button to change the displayed number to 7, 10, or 11digits. The first dialing option displayed is the 11 digits for a long distance call. Press the /OPTION button for the second time, the displayed number will change to 7 digits for a local call.Press the /OPTION button for the third time, the displayed number will change to 10 digits for a local call with area code.4. Press the button to dial the displayed number.5. To end the call, either press the button or place the HANDSET on the BASEUNIT.Editing a Stored Number in the DIRECTORY (PHONE BOOK)1. Press the button. The LCD Screen will display “Phone book.”2. Press the SCROLL UP or DOWN button to find the record you wish to edit.3. Press the button. The entry will display with a flashing prompt over the first character of the name field.4. Move the cursor to the letter or number you wish to edit by pressing the SCROLLUP or DOWN , SHIFT RIGHT or LEFT button. To erase a character or digit, press the button. To add a letter or number, use the TELEPHONE KEYPAD to /OPER buttons. Characters or numbers will be inserted in front of the cursor (See page 18 for details.)5. When the entry is edited as you desire, press and hold the /RE/PA button tostore the edited record.DIR/ESCTALKTALKDIR/ESC2 9###1 0SAVEEDIT/FLASHDEL/INTFirst press.Second press.Third press.Caller ID System OperationDSST~2801~B.qxd 1/25/2003 7:03 PM Page 10

Navigation menu