Litestar Electronics Technology H8613RFV Turbo Shock III Wireless Controller User Manual PS3 8613S V1 0

Download:
Mirror Download [FCC.gov]
Document ID	1015002
Application ID	9xLDyLvgpPh8zaabZGXjTg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.57kB (44576 bits)
Date Submitted	2008-10-15 00:00:00
Date Available	2008-10-15 00:00:00
Creation Date	2008-10-09 12:28:19
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2008-10-09 12:28:19
Document Title	Microsoft Word - PS3-8613S V1.0.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	aven

Turbo Shock Ⅲ Wireless Controller User Manual
1. Introduction
Congratulations on choosing this RF motion sensing Controller, the ultimate accessory to PS3 games,
PS2 games, and PS1 games. With this product you can easily get ps3 playing experience.
2. Features and Specification
1)
2)
3)
4)
Compatible with all PS3 consoles, including US version, Japan version, and EU version;
Four controller port indicator LEDs
Available 20pcs RF controllers playing at the same time within valid range;
With 6 axis motion sensing feature, it includes 3 axis translation motion(X,Y,Z) and 3 axis
rotational motion(pitch, roll and yaw).
5) With vibration feature (if the software supplies vibration)
6) HOME button for setting on PS3 console;
7) Sleep function and wake function;
8) FC (force connection) function;
9) ISM frequency: 2.402Ghz ~ 2.480Ghz
10) Available over 7 meter straightaway range;
11) Power supplied by 4 AAA batteries;
12) With 1 pcs mini USB power supply cable.
3. Connection & Installation:
1)
2)
3)
4)
5)
6)
Power on PS3 console.
Input the batteries
Turn the power switch to ON position, the four LED indicators are flashing simultaneously but
slowly.
Press FC button the four LED indicators are flashing quickly
Insert the receiver to PS3 console, four LED indicators are flashing slowly again
Press HOME for connection and then the port indicator LED turns to stable and you can start to
play.
Remarks: Please follow step 3-6 if you are using the controller for the first time. For succeeding usage,
after inserting the receiver to the PS3 console, press HOME button, the controller can automatically be
connected.
4.
Operation Method:
1)
The HOME button of the controller will work as PS button function of PS3 controller. When you
press the HOME button and hold it for 2 seconds, it will enter the PS3 XMB windows and will be
default as analog mode
2)
The LED number indication will represent the game pad number the game pad is assigned to:
LED1 ~ 4 = Player 1~ 4
LED1 + 4 = Player 5
LED2 + 4 = Player 6
LED3 + 4 = Player 7
Remarks: Every time when you pull out and plug the receiver into PS3 USB port or reset PS3 console
or the screen hint you to press PS button, you must press the HOME button for start
5. Low Power Consumption (Sleep Mode)
1). In order to save power of the batteries and prolong batteries life, the wireless controller is designed to
enter sleep mode if the wireless controller has not been used for a period of time. There are two kinds
of condition that the controller could get into sleeping mode after you power on the controller.
A, under the power-on condition for controller, no receiver is found over 55 seconds;
B, Under the power-on condition for controller, no any operation acts on any button or axes over 10
minutes;
2). To exit sleep mode, press HOME button, and the current port LED indicator illuminates.
6. FC function (short for “Force Connection”)
1)
You can assign a RF controller to an appointed receiver when many RF controllers work in the
same operating instance. (Please follow step connection and installation 3-6 for force connection)
2)
After well connected, wireless controller and it’s receiver will be partnered automatically
3)
If you want to change the receiver or controller, you should have to force connect again(Please follow
step connection and installation 3-6 for force connection)
7. Low-voltage alert function
When battery is weak or empty, the current port LED indicator would flash to indicate that the
rechargeable batteries need to be replaced or plug the mini usb cable to the controller power supply.
8. RESET function:
If the controller experience unexpected disconnection, drain, or voltage surge protection, it may not be able
to connect, or be connected but without any function, you need to switch the power switch to OFF and then
to ON for resetting:
9. Battery Safety
1)
2)
3)
4)
5)
6)
7)
8)
9)
Batteries are to be inserted with the correct polarity
Use only the recommended batteries
Do not mix old & new batteries
Do not mix Alkaline, Standard (Carbon Zinc) or rechargeable (Nickel-Cadmium) batteries
Dispose of batteries safety & correctly
Do not dispose the batteries into fire, batteries may explode or leak
Remove batteries if the controller will not be used for a long period of time
Exhausted batteries should be removed from the controller immediately
Don’t charge non-rechargeable batteries
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or
transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2008:10:09 12:28:19+08:00
Create Date                     : 2008:10:09 12:28:19+08:00
Format                          : application/pdf
Title                           : Microsoft Word - PS3-8613S V1.0.doc
Creator                         : aven
Document ID                     : uuid:72ba4330-cd3b-4cf0-9a06-3573aa4ac67a
Instance ID                     : uuid:8c4feed3-d867-434e-887a-e63cc450d9e9
Page Count                      : 3
Author                          : aven

EXIF Metadata provided by EXIF.tools