Litestar Electronics Technology XB-6600 Wireless Gamepad User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	453217
Application ID	+tA3fpiEj9iuk22eGjLaiw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.83kB (147885 bits)
Date Submitted	2004-07-26 00:00:00
Date Available	2004-07-22 00:00:00
Creation Date	2004-07-20 06:53:14
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2004-07-19 23:55:10
Document Title	Microsoft Word - Manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	cnstgu00

Operation Manual of XBox 2.4GHz RF Game Controller
Brief Introduction
Thank you for purchasing our XBox 2.4GHz Radio Frequency Game Controller. Along with our
highest manufacturing standards and testing throughout its development, we ensure you could get
the best possible product. To make it fully fits your X-Box Console, please review this user’s
instruction manual carefully for operation.
Characteristic
1, Applicable for X-Box Console and various of software the console supported;
2, Support Dual Shock game software;
3, Two Built-in motors make the game more realistic;
4, Special device of low power consumption feature;
5, Macro function and LED indicator;
6, Alarm function for lower voltage;
7, FC function (Short for “Force Connection”) between the appointed controller and the appointed
receiver;
8, Extra connection cable for use instead of batteries;
9, ISM frequency range between 2.4GHz – 2.5GHz
10, Available over 10 meter straightaway range;
11, Available 20 RF controllers playing at the same time within valid range;
12, Normal voltage: 4V – 7V (4 X AA batteries)
Keystroke Layout
Connection and Installation
1, Insert the receiver to the socket of X-Box Console and turn on the power.
2, Place the 4 X AA batteries inside the controller first, and move the switch to the position of
“ON”, then press “Start” “Left Thumb” “Right Thumb” or “FC”so as to activate the
controller. The Led Indicator on the receiver will be on;
3, You can play by pressing 8-way Directional button and other control buttons.
Operation of the Function
1, Low Power Consumption
To save the power consumption, there is a special “sleeping mode” built into this controller.
The general conditions are as follows:
a, Under the power-on condition for controller, no receiver is found over 15 seconds;
b, Under the disconnection condition, the receiver can’t be re-connected with the controller
over 6 seconds;
c, Under the power-on condition, no any operation acts on any button or axes over 3 minutes;
d, When pressing down the FC group button “Back + Right Thumb” on the controller, but the
“FC” button on the receiver isn’t pressed down over 15 seconds;
e, Under the sleeping mode, you can press “Start”，“Left Thumb” or “Right Thumb” so as to
activate the controller.
2, Definition of Turbo function
a, The buttons “A, B, X, Y, Left Trigger, Right Trigger, White Key, Black Key” can be defined
with Turbo function.
b, Press “Turbo + any action button” at the same time for odd times, the button will be with
Turbo function. Press “Turbo + the defined action button” at the same time for even times,
the defined Turbo function will vanish.
3, Vibration function
While playing, press “Back + Right Thumb” group button at the same time, the motor vibrates
once, which shows the vibration function exits. Press “Back + Right Thumb” group button for
the 2nd time, the motor vibrates twice, which shows the vibration function is activated again.
4, Alarm function for lower voltage
When the voltage of the batteries is too low, Macro-Led will keep on flashing, which shows
that the new batteries should be provided, or the original batteries should be recharged. Also
the vibration function is shut off automatically.
5, FC function (short for “Force Connection”) between the appointed controller and the appointed
receiver
You can appoint the RF controller with the appointed receiver when more RF controllers work
in the same operating circumstance. The method is to press down the FC group button “Select
+ Left Thumb” on the controller (or the button “FC” on the receiver), then press the button
“FC” on the appointed receiver (or the FC group button “Select + Left Thumb” on the
controller) within 15 seconds.
6, Macro function (with memory after power off suddenly)
Only “White Key, Black Key, Left Thumb and Right Thumb” buttons can be defined with
Macro function. After definition with Macro function, its original function vanishes. In
addition, the Macro function can be one or more group functions among buttons “A, B, X, Y,
White Key, Black Key, Left Trigger, Right Trigger, D-PAD”. The “Back” button represents as Space
button for use.
A, The definition of Macro function:
a, Press “Macro” button, the Led is on.
b, Press any defined button among “White Key, Black Key, Left Thumb, Right Thumb”,
such as “White Key”;
c, Press a few function buttons and group them as defined functions, such as “A, X, Y, Left
Trigger” buttons. (Remember that each button can be defined with group function of no
more than 15 steps. For examples, pressing “A” once, or pressing “B, X, Left Trigger”
buttons at the same time means 1 step. It will be saved automatically and exit after 15
steps. )
d, Press “Macro” key and exit. The Led indicator is off. Thus, “White Key” has the function
of “A-X-Y-Left Trigger” group buttons.
B, The cancellation of “Macro” function
a, Press “Macro” button, the Led indicator is on.
b, Press any defined button, such as “White Key”, the Led indicator flashes.
c, Press “Macro” button, the Led indicator is off. The defined “Macro” function on “White
Key” button vanishes.
7, While not using the batteries, you can use the extra connection cable for playing. Connect the
cable between the port of console and the socket marked “DC5V” on the controller first, and
the Green Led is on. Then turn on the power, and start to play.
Battery Safety
Batteries are to be inserted with the correct polarity
Use only the recommended batteries
Do not mix old & new batteries
Do not mix Alkaline, Standard(Carbon Zinc) or rechargeable (Nickel-Cadmium) batteries
Dispose of batteries safety & correctly
Do not dispose of batteries in fire, batteries may explode or leak
Remove batteries if the toy will not be used for a long period of time
Exhausted batteries are to be removed from the toy
The supply terminals are not to be short-circuited
Non-rechargeable batteries are not to be recharged
NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY
TO OPERATE THE EQUIPMENT.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2004:07:20 06:53:14Z
Modify Date                     : 2004:07:19 23:55:10-07:00
Page Count                      : 4
Creation Date                   : 2004:07:20 06:53:14Z
Mod Date                        : 2004:07:19 23:55:10-07:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : cnstgu00
Metadata Date                   : 2004:07:19 23:55:10-07:00
Creator                         : cnstgu00
Title                           : Microsoft Word - Manual.doc

EXIF Metadata provided by EXIF.tools