Locks 4591 Deadlatch Paddle
User Manual: Locks 4591 Deadlatch Paddle Mayflower Sales - Adams Rite
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Trim
4591 Deadlatch
Paddle
4591 Deadlatch Paddle
T-19
Specifications
Paddle
• Extruded aluminum, 628 Clear Anodized finish (US28). 313
Dark Bronze Anodized and 335 Black Anodized are also
available. US3 Bright Brass, US26 Bright Chrome, or US26D
Satin Chrome plating is also available.
Escutcheon
The 4591 Deadlatch Paddle is an ergonomically-friendly
alternative to a knob or lever handle. Operate with a simple
push or pull.
Function
An alternative to knob or lever handles. Makes opening a latched door as natural
as opening an unlatched one – just push or pull in the direction the door swings.
Available for any Adams Rite 4300, 4500 or 4900 Series Deadlatch, MS+1890
Deadlock/Latch, or 2190/2290 Interconnected Deadbolt/Deadlatch.
• Zinc alloy with Black finish. Houses steel operating
mechanism. Secured to door stile with special binder posts
that extend into the escutcheon to rigidly resist torque loads
in any direction.
Cam Plug
• Furnished for use with 4300, 4500 and 4900 Series
Deadlatches. Cam plug not for use with MS+1890 Deadlock/
Latch or 2190/2290 Interconnected Deadbolt/Deadlatch.
Secured in latch body by cylinder setscrew, plug is also
rigidly tied to escutcheon by hardened steel pins.
Monitor Switch Options
4591M
• Paddle without latch drive mechanism but with switch that
can be wired to make or break a low voltage circuit.
Operation
Available in four configurations: push to left, push to right, pull to left, and pull to
right. Can be reconfigured to any mode in the field. Dogging not to be installed in
pull configuration.
4591MA
• Paddle with latch drive mechanism, complete active
paddle with switch.
91-0914 Monitor Switch Kit
• Adds monitor switch function to 4591 Paddle ("push"
version only).
Paddle Dogging (“Push” versions only)
• Turning hex key in escutcheon holds the paddle down,
leaving door free-swinging. Dogging key provided.
Options
Hex Key
for Dogging
• First dash number specifies operation (handing) and
compatible latch. Second dash number can be used to
specify non-standard units for doors thicker than 1-3/4"
(see dash table on back of page). Also available: 4591M
Paddle/switch to actuate magnetic lock, alarm, etc. (No latch
retracting mechanism). 4591MA Active Paddle with switch
and latch retracting mechanism. 4781 Two-Point Deadlatch
uses a modified, but matching version of the 4591 Paddle.
Standard Package
• Individually boxed with dogging hex key and mounting
hardware. Units for 4300, 4500 or 4900 Series Deadlatches
include cam plug. Shipping weight: 1-1/2 lbs.
Cam plug
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
ARM-014-9/14
www.adamsrite.com
TRIM
4591 Deadlatch Paddle
T-20
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
Stile Preparation
Dimensions
For 4500/4900 latches, see MS+1890/2190
for different hole pattern
5"
127mm
BACKSET
PUSH*
21/64" DIA.
8.3mm
(2 PLCS)
STILE
PULL*
2-1/16"
77.8mm
4-5/32"
105.6mm
1-51/64"
Installation
3"
7/8"
45.6mm
76.2mm
22.2mm
*SHOWN AT REST. 2"
PADDLE TRAVEL IS: 50.8
mm
1-11/32"
1-23/32"
34.1mm
43.7mm
LATCH
CYL.
1-1/4" DIA.
31.8mm
1
2
INSTALL
BINDER
POSTS
INSTALL
LATCH &
CAM PLUG
3
4
INSTALL
ESCUTCHEON
INSTALL
PADDLE
5/16-24
NUT
CAM PLUG
(NOT REQ. WITH
MS+1890/2190)
10-32
SCREWS
FIRST DASH
FOR LATCH SERIES
-01 4300/4500/4900
-11 MS+1890/2190
-02 4300/4500/4900
-12 MS+1890/2190
-03 4300/4500/4900
-13 MS+1890/2190
-04 4300/4500/4900
-14 MS+1890/2190
OPPERATION
PULL
TO LEFT
Outside of left hand reverse door or
inside of right hand
PUSH
TO LEFT
Outside of left hand door or inside of right
hand reverse
PULL
TO RIGHT
Outside of right hand reverse door or
inside or left hand
PUSH
TO RIGHT
Outside of right hand door or inside of left
hand reverse
How to order
PIVOT PIN
SETSCREW
USE
LH
LHR
RH
3
-03 OR -1
2
-1
-02 OR
-04 OR -1
4
-01 OR
-11
RHR
-01 OR -1
1
-04 OR -1
4
2
-02 OR -1
3
-1
R
O
3
-0
4591 Deadlatch paddle
Specify quantity and the following information. Order related products separately.
Product No.
OPTIONS**
OPERATION
DOOR THICKNESS
FINISH*
4591
M
02
-00
-313
- Standard Paddle
For 4300, 4500, 4900 Series Deadlatches
For MS+1890, 2190
313 Dark Bronze Anodized
M Paddle w/ switch only
See table above
00 1-3/4"
00 1-3/4"
335 Black Anodized
MA Active paddle w/ switch
01 1-13/16" to 2"
01 1-3/4" to 2-1/4"
628 Clear Anodized
02 2-1/4" to 2-1/2"
02 2-5/16" to 2-1/2"
US3 Bright Brass
03 2-3/4" to 3"
03 2-9/16" to 2-3/4"
US26 Bright Chrome
04 3-1/4"
US26D Satin Chrome
* Paddle only. ** M and MA options availble on push paddles only, not pull paddles.
Related Products
Compatible Products
When purchasing this product, please consider the following
related products, available separately:
This product is compatible with the following products:
Accessories
Deadlocks
Deadlatches
91-0914 Monitor Switch Kit.
MS+1890 Deadlock/Latch
2190/2290 Interconnected Deadbolt/Deadlatch
4300 eLatch Electrified Deadlatch
4500 Series Standard Duty Deadlatch
4900 Series Heavy Duty Deadlatch
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Create Date : 2015:01:07 15:34:33-07:00 Creator : Adobe InDesign CS6 (Windows) Modify Date : 2016:08:03 15:21:33-04:00 Title : XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2016:08:03 15:21:33-04:00 Creator Tool : Adobe InDesign CS6 (Windows) Format : application/pdf Document ID : uuid:951c6f92-f7d2-4804-b266-8a881664dadb Instance ID : uuid:37402c55-3f47-4ae1-a9e1-6ec4ca6c1754 Producer : Adobe PDF Library 10.0.1 Page Count : 2EXIF Metadata provided by EXIF.tools