Locks IQ Panel 2 Quick Guide 5.0 Qolsys V5.2 5.2

User Manual: Locks Qolsys IQ Panel 2 Quick Guide v5.2 Security Product Manuals - Northeast Security SolutionsNortheast Security Solutions

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

IQ PANEL 2 QUICK GUIDE
1

WALL MOUNT

Press the buttons on the
Secure the back plate to the wall,
bottom to release the back then loop the hang strap over the
plate from the panel face strain relief hook (1) Run the
antenna through the hole (2)

Plug in the power supply Place the panel onto the top of the
(1) and then clip the wire back plate (1) and hinge downward
to the retainer clip (2)
until it snaps in place. Take care as
you route the antenna into the wall (2)

OPTIONAL MOUNTING: TABLE STAND (INCLUDED IN BOX)

Remove the back plate

Plug in the power supply (1)
and then clip the wire to the
retainer clip (2) then into the
strain relief hook (3)

2

3

Connect power supply

ACCESS ADVANCED SETTINGS

Swipe down to access settings tray

6
RUN A
CELL TEST

System
Tests

CONNECT
WI-FI

Advanced
(default installer
password is 1111)

ADD SECURITY SENSORS
Add New

Cell Test
Security Auto Learn
Sensors
Sensor

7
Wi-Fi

CHECK FOR
UPDATES Upgrade

Software

TRY THE
MOBILE
TECH APP

CREATE
ACCOUNT

10

8
Settings

Connect the table stand to
the holes on the upper back.

4
Press and hold the power
button on the right side of
the panel for 3 seconds to
power up

WARNING! Use 5.5v Power Supply ONLY

5

Replace the back cover

CHOOSE
YOUR
NETWORK

UPGRADE
USING
NETWORK

Touch
Customize
“Add
New”
as desired*

*If pairing devices with encryption, be sure to
select “S-Line” as the “Source” of the signals

11

ADD Z-WAVE DEVICES

Check for
updates

Security Signaling Residential Fire Alarm & Security 9
Equipment, UL Listed
INSTALL
Conforms to ANSI/UL Standards
Conforms to ANSI/UL Std. S985. 1023. & 1635
DEVICES Installation Devices
Certified to ULC Sub. C1023 & ULC Std. S545
Doc#: IQP2-QG-12-16
Rev Date: 12/08/16
Qolsys Inc. proprietary. Reproduction without permission is not permitted.

Tamper or
trip sensor

PAIR

Z-Wave
Devices

Add
Device

Add New

Touch
Customize
Touch
“PAIR” (both as desired “Add New”
on panel and
on the device)
techsupport@qolsys.com (855) 476-5797

QOLSYS, INC.

END USER LICENSE AGREEMENT

PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE INSTALLING OR USING THE SOFTWARE EMBEDDED IN OR USED WITH
THE HARDWARE PRODUCTS PROVIDED BY QOLSYS (“QOLSYS PRODUCTS”) AND ALL OTHER SOFTWARE AND DOCUMENTATION PROVIDED BY
QOLSYS WITH OR FOR USE WITH THE ACCOMPANYING QOLSYS PRODUCTS (COLLECTIVELY, THE “SOFTWARE”).
THE TERMS AND CONDITIONS OF THIS END USER LICENSE AGREEMENT (“AGREEMENT”) GOVERN USE OF THE SOFTWARE PROVIDED BY QOLSYS,
INC. (“QOLSYS”).
Qolsys is willing to license the Software to you only upon the condition that you accept all the terms contained in this Agreement. If you install or use the
Software, then you have indicated that you understand this Agreement and accept all of its terms. If you are accepting the terms of this Agreement on behalf of
a company or other legal entity, you represent and warrant that you have the authority to bind that company or other legal entity to the terms of this Agreement,
and, in such event, “you” and “your” will refer to that company or other legal entity. If you do not accept all the terms of this Agreement, then Qolsys is unwilling
to license the Software to you, and you are not authorized to use the Software.
1. Grant of License. Conditioned upon your compliance with the terms and conditions of this Agreement, Qolsys grants you a non-exclusive, non-transferable
and non-sublicensable license to use the Software, solely as embedded in or pre-installed on the Qolsys Products and solely for your non-commercial personal
use. Qolsys reserves all rights in the Software not expressly granted to you in this Agreement.
2. Restrictions. Except as expressly specified in this Agreement, you may not: (a) copy, modify (including but not limited to adding new features or otherwise
making adaptations that alter the functioning of the Software), or create derivative works of the Software; (b) transfer, sublicense, lease, lend, rent or otherwise
distribute the Software to any third party; or (c) otherwise use the Software in a way not permitted by the terms of this Agreement. You acknowledge and agree
that portions of the Software, including but not limited to the source code and the specific design and structure of individual modules or programs, constitute or
contain trade secrets of Qolsys and its licensors. Accordingly, you agree not to disassemble, decompile or reverse engineer the Software, in whole or in part, or
permit or authorize a third party to do so, except to the extent such activities are expressly permitted by law notwithstanding this prohibition.
3. Ownership. The copy of the Software is licensed, not sold. You own the Qolsys Product in which the Software is embedded, but Qolsys and its licensors
retain ownership of the copy of the Software itself, including all intellectual property rights therein. The Software is protected by United States copyright law and
international treaties. You will not delete or in any manner alter the copyright, trademark, and other proprietary rights notices or markings appearing on the
Software as delivered to you.
4. Maintenance, Support and Updates. Qolsys is under no obligation to maintain, support or update the Software in any way, or to provide updates or error
corrections. However, if any bug fixes, maintenance releases or updates are provided to you by Qolsys, its dealers or a third party, such fixes, releases and
updates are and shall be considered “Software”, and will be subject to the terms of this Agreement, unless you receive a separate license from Qolsys for that
release or update that supersedes this Agreement.
5. Term. The license granted under this Agreement remains in effect for a period of 75 years, unless earlier terminated in accordance with this Agreement. You
may terminate the license at any time by destroying all copies of the Software in your possession or control. The license granted under this Agreement will
automatically terminate, with or without notice from Qolsys, if you breach any term of this Agreement. Upon termination, you must at Qolsys’ option, either
promptly destroy or return to Qolsys all copies of the Software in your possession or control.
6. Limited Warranty. THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND. QOLSYS DISCLAIMS ALL WARRANTIES AND
CONDITIONS, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT, AND ANY WARRANTIES AND CONDITIONS ARISING OUT OF COURSE OF DEALING OR USAGE
OF TRADE. NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED FROM QOLSYS OR ELSEWHERE WILL CREATE ANY WARRANTY OR
CONDITION NOT EXPRESSLY STATED IN THIS AGREEMENT. QOLSYS DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR EXPECTATIONS OR
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE ERROR-FREE OR UNINTERRUPTED, OR THAT ALL SOFTWARE ERRORS WILL BE
CORRECTED.
7. Limitation of Liability. QOLSYS’ TOTAL LIABILITY TO YOU FROM ALL CAUSES OF ACTION AND UNDER ALL THEORIES OF LIABILITY WILL BE LIMITED TO
$100. IN NO EVENT WILL QOLSYS BE LIABLE TO YOU FOR ANY SPECIAL, INCIDENTAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES
(INCLUDING LOSS OF PROPERTY) OR FOR THE COST OF PROCURING SUBSTITUTE PRODUCTS ARISING OUT OF OR IN CONNECTION WITH THIS
AGREEMENT OR THE EXECUTION OR PERFORMANCE OF THE SOFTWARE, WHETHER SUCH LIABILITY ARISES FROM ANY CLAIM BASED UPON
CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, AND WHETHER OR NOT QOLSYS HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH LOSS OR DAMAGE. THE FOREGOING LIMITATIONS WILL SURVIVE AND APPLY EVEN IF ANY LIMITED REMEDY SPECIFIED IN
THIS AGREEMENT IS FOUND TO HAVE FAILED OF ITS ESSENTIAL PURPOSE. Some jurisdictions do not allow the limitation or exclusion of liability for
incidental or consequential damages, so the above limitation or exclusion may not apply to you.
8. U.S. Government End Users. The Software and Documentation are “commercial items” as that term is defined in FAR 2.101, consisting of “commercial
computer software” and “commercial computer software documentation,” respectively, as such terms are used in FAR 12.212 and DFARS 227.7202. If the
Software and Documentation are being acquired by or on behalf of the U.S. Government, then, as provided in FAR 12.212 and DFARS 227.7202-1 through
227.7202-4, as applicable, the U.S. Government’s rights in the Software and Documentation will be only those specified in this Agreement.
9. Export Law. You agree to comply fully with all U.S. export laws and regulations to ensure that neither the Software nor any technical data related thereto nor
any direct product thereof are exported or re-exported directly or indirectly in violation of, or used for any purposes prohibited by, such laws and regulations.
10. General. This Agreement will be governed by and construed in accordance with the laws of the State of California, without regard to or application of conflict
of laws rules or principles. The United Nations Convention on Contracts for the International Sale of Goods will not apply. You may not assign or transfer this
Agreement or any rights granted hereunder, by operation of law or otherwise, without Qolsys’ prior written consent, and any attempt by you to do so, without
such consent, will be void. Qolsys has the right to assign this Agreement unconditionally. Except as expressly set forth in this Agreement, the exercise by either
party of any of its remedies under this Agreement will be without prejudice to its other remedies under this Agreement or otherwise. The failure by either party
to enforce any provision of this Agreement will not constitute a waiver of future enforcement of that or any other provision. If any provision of this Agreement is
held to be unenforceable or invalid, that provision will be enforced to the maximum extent possible, and the other provisions will remain in full force and effect.
This Agreement is the complete and exclusive understanding and agreement between the parties regarding its subject matter, and supersedes all proposals,
understandings or communications between the parties, oral or written, regarding its subject matter, unless you and Qolsys have executed a separate agreement
governing use of the Software. Any terms or conditions contained in your purchase order or other ordering document that are inconsistent with or in addition to
the terms and conditions of this Agreement are hereby rejected by Qolsys and will be deemed null.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Page Count                      : 2
PDF Version                     : 1.4
Title                           : IQ-Panel-2-Quick-Guide-5.0
Producer                        : Mac OS X 10.11.6 Quartz PDFContext
Creator                         : Pages
Create Date                     : 2016:12:09 05:34:16Z
Modify Date                     : 2016:12:09 05:34:16Z

EXIF Metadata provided by EXIF.tools