Locks View PDF Ives Hq

User Manual: Locks View PDF Catalog & Manufacturer Links

Open the PDF directly: View PDF PDF.
Page Count: 20

ENCYCLOPEDIA OF LOCKSMITH SUPPLIES
1.800.652.2835 295
www.acclock.com
Accredited Lock Supply
144 CONCEALED SCREW SURFACE BOLTS
Fully concealed, three-screw easy installation. With stainless steel tension spring
that eliminates creep and prevents rod pull-out. 5/8" diameter half round rod; 1"
projection; 1" throw.
Hand Polished Brass. Individually polybagged; 5 per box. Supplied with Universal
and Angle strikes and hex key wrench.
Code Length Throw Finish Price
IV144B26-4 4" 1" Polished Chrome 23.80
IV144B26-9 9" 1" Polished Chrome 26.80
IV144B26-12 12" 1" Polished Chrome 32.30
MODERN SLIDE BOLTS
Hand Polished Brass. Polybagged with screws; 10 per box. Supplied with Surface,
Mortise and Universal strikes.
Code Length Throw Finish Price
IV84B3 2 1/2" 9/16" Polished Brass 14.44
40 CONCEALED SCREW SURFACE BOLTS
An outstanding line of modern surface bolts. Made of hand polished, extruded
brass and aluminum
Extremely strong and durable with interlocking construction and heavy gauge track
and rod. Concealed rod installation; no marring of bolt. Tension spring holds bolt
in position. Width: 5/8". Projection: 3/4".
Individually polybagged with screws and both universal and mortise strike. 10 per
box. (Surface strike available on special order.)
Code Length Throw Finish Price
IV40B26-3 3" 11/16" Bright Chrome 15.70
IV40B26D-3 3" 11/16" Satin Chrome 15.70
IV40B3-3 3" 11/16" Polished Brass 15.00
IV40B26-4 4" 15/16" Bright Chrome 16.50
IV40B26D-4 4" 15/16" Satin Chrome 16.50
IV40B3-4 4" 15/16" Polished Brass 15.70
IV40B26-6 6" 15/16" Bright Chrome 19.20
IV40B26D-6 6" 15/16" Satin Chrome 19.20
IV40B3-6 6" 15/16" Polished Brass 18.50
IV40B26D-9 9" 15/16" Satin Chrome 24.00
CONCEALED SCREW SURFACE BOLTS
CONCEALED SCREW SLIDE BOLTS
WE NOW CARRY THE IVES LINE OF HINGES
SEE PAGE 299
B
Go To Table of Contents
296
www.acclock.com
Accredited Lock Supply
Code Finish Price
IV481B3 Polished Brass 10.70
IV481B26 Bright Chrome 10.90
IV481B26D Satin Chrome 12.50
IV481F4 Satin Brass 5.90
IV481F5 Antique Brass 6.70
IV481F10 Satin Bronze 6.70
IV481F15 Satin Nickel 5.90
IV481F26 Bright Chrome 5.90
IV481F26D Satin Chrome 5.90
IV481F716 Aged Bronze 6.90
Code Length Half- Guides Throw Finish Price
Round
Rod
IV043B26-2 2" 3/8" 1 3/16" 3/8" Polished Chrome 14.40
IV043B26-3 3" 3/8" 1 3/16" 3/4" Polished Chrome 14.40
IV043B26-4 4" 3/8" 1 3/16" 3/4" Polished Chrome 15.40
IV043B26-6 6" 3/8" 1 3/16" 3/4" Satin Chrome 16.30
IV043F3-2 2" 3/8" 1 3/16" 3/4" Brass Plate 4.21
IV043F3-12 12" 3/8" 1 3/16" 3/4" Brass Plate 16.24
IV043F14-2 2" 3/8" 1 3/16" 3/4" Bright Nickel 4.24
IV043F14-3 3" 3/8" 1 3/16" 3/4" Bright Nickel 5.60
IV043F14-4 4" 3/8" 1 3/16" 3/4" Bright Nickel 5.37
IV043F14-6 6" 3/8" 1 3/16" 3/4" Bright Nickel 5.88
IV43B26-4 4" 1/2" 1 3/8" 1" Satin Chrome 17.10
IV43B26-6 6" 1/2" 1 3/8" 1" Polished Chrome 19.10
IV43B26-9 6" 1/2" 1 3/8" 1" Polished Chrome 24.50
IV43B26D-9 9" 1/2" 1 3/8" 1" Satin Chrome 24.50
IV43B26-12 12" 1/2" 1 3/8" 1" Satin Chrome 31.40
IV43F3-4 4" 1/2" 1 3/8" 1" Brass Plate 5.50
IV43F3-9 9" 1/2" 1 3/8" 1" Brass Plate 5.50
IV43F3-12 12" 1/2" 1 3/8" 1" Brass Plate 5.50
IV143B26-9 9" 5/8" 1 1/2" 1" Bright Chrome 22.94
IV143B26-12 12" 5/8" 1 1/2" 1" Bright Chrome 27.72
IV143B26D-12 12" 5/8" 1 1/2" 1" Satin Chrome 27.72
STRAPLESS SURFACE BOLTS
Exclusive Ives stainless steel tension spring prevents rod “pull-outs” and insures
permanent spring tension. Attractive, semi-concealed guides assure smooth op-
eration and eliminate rod marring. Knobs, rods and guides are attractively styled
and well proportioned.
Solid Hand Polished Brass. Individually polybagged with screws. 043 and 43
-10 per box; 143 -5 per box. Supplied with both Universal and Angle strikes. 143
furnished with guides in 12" length.
DELUXE SECURITY BOLTS
For the ultimate strength, security and simplicity in installation, with crisp and
contemporary styling that blends with various door styles. Solid strength, hand
polished brass bolt - 5/16" diameter, securely and permanently housed in an over-
sized precision-designed extrusion of solid brass.
The creep-proof bolt remains positively locked or unlocked. Full 5/8" throw.
Individually polybagged, with three strikes and eight recessed head screws. 10
per box.
CHAIN DOOR GUARDS
Economy model. Design, detail and nish of the nest quality craftsmanship. Welded
twist link steel chain. Unusually narrow 11/16" chain holder for modern trims.
Individually polybagged with sheet metal screws; 10 per box.
Code Length Width Projection Throw Finish Price
IV87B26D 2 1/4" 1 1/4" 15/32" 5/8" Bright Chrome 24.20
IV87B3 2 1/4" 1 1/4" 15/32" 5/8" Polished Brass 22.10
STRAPLESS SURFACE BOLTS CHAIN DOOR GUARDS
DELUXE SECURITY BOLTS
B
B = Brass F = Steel
B = Brass F = Steel
Go To Table of Contents
ENCYCLOPEDIA OF LOCKSMITH SUPPLIES
1.800.652.2835 297
www.acclock.com
Accredited Lock Supply
DELUXE HEAVY DUTY SOLID BRASS SURFACE BOLTS
Rugged and handsome bolts for heavy doors. Extra heavy, 5/8" half round brass
rod with 1 1/4" diameter knob. Bolts - 18" long and over. Furnished with three
guides. Hand Polished Solid Brass. Packed with screws and one strike; 5 per box.
Specify strike required.
Code Length Width of Throw Finish Price
Guides
IV253B3-8 8" 1 9/16" 1 1/8" Polished Brass 61.90
IV253B3-12 12" 1 9/16" 1 1/8" Polished Brass 81.40
IV353B5-18 18" 1 9/16" 1 1/8" Antiqe Brass 99.60
IV353B26-12 12" 1 9/16" 1 1/8" Polished Chrome 82.10
IV353B10B-18 18" 1 9/16" 1 1/8" Dark Bronze 104.10
IV354B26D-8 8" 1 3/4" 7/8" Satin Chrome 108.10
IV354B10B-12 12" 1 3/4" 7/8" Dark Bronze 133.10
IV354B26D-12 12" 1 3/4" 7/8" Satin Chrome 133.10
IV354B5-24 24" 1 3/4" 7/8" Antiqe Brass 171.50
DUTCH DOOR BOLTS
Practical, rugged and attractive; for use on Dutch doors and areas requiring extra
security. Easy to operate, even against weather stripping. Crisp design, enhanced by
a 1 1/4" knob. Chamfered rod end draws the two leaves of the door tightly together.
Guides and strikes are cast, while the rod is made of heavy 5/8" stock. 4 1/4" length.
Hand Polished Brass.Individually polybagged. Comes w/standard strike & screws.
Code Width Half-Round Throw Finish Price
of Guide Rod
IV054MB3 1 5/8" 5/8" 5/8" Polished Brass 43.40
IV054MB15A 1 5/8" 5/8" 5/8" Satin Nickel, Black 49.20
IV54B26 1 5/8" 5/8" 3/4" Bright Chrome 51.54
IV55B26 1 5/8" 5/8" 3/4" Bright Chrome 64.90
IV55B5 1 5/8" 5/8" 3/4" Antique Brass 64.90
DUTCH DOOR QUADRANT-NON HANDED
Exclusive design, used to secure the top and bottom Dutch Doors - the most
attractive and rugged non-handed Dutch quadrant available. Combines artistry
craftsmanship and engineering excellence.
Base: 2 3/4" x 1 1/4". Overall Height: 4 1/2". Overall Width: 4 1/2"
Hand Polished Bronze. Individually boxed with screws.
IV56B5 Antique Brass 84.10
B
Go To Table of Contents
298
www.acclock.com
Accredited Lock Supply
MORTISE DOOR BOLTS
Hand polished brass knobs and escutcheons. 1 3/4" Strike; 1/2" Bolt. Individually
polybagged with screws.
STEEL BOLT
Strong and smooth operating. Brass case.
Code Backset Throw Finish Price
IVS48B3 1 3/4" 1/2" Polished Brass 15.90
IVS48B26D 1 3/4" 1/2" Polished Brass 18.40
IV230B3 Polished Brass 12.00
IV230B5 Antique Brass 13.20
IV230B26 Bright Chrome 13.80
IV230B26D Satin Chrome 13.80
SLIDING DOOR EDGE PULL
Rugged construction, quality made edge pull,
nished to Ives’ exacting specications. Ideal for
sliding doors. 3/4" width facilitates installation
on thin doors. A spring automatically returns
lever ush with plate.
Size: 3 7/8" x 3/4" x 1 5/8". Conforms with
Federal Spec. No. 1861.
Hand Polished Wrought Brass plate and
Extruded Brass lever. Individually polybagged
with screws; 10 per box.
DOOR GUARD
Maintains security while door is slightly open.
Solid Brass. Arm Length: 4 3/4".
IV482B26 Bright Chrome 32.50
IV482B26D Satin Chrome 32.50
IV482B3 Polished Brass 29.50
IV482B10 Satin Bronze 32.50
IV482B10B Dark Bronze 32.50
IV482B15 Satin Nickel 44.60
Aluminum
IV482A26 Bright Chrome 10.40
IV482A26D Satin Chrome 10.40
IV482A3 Polished Brass 8.80
DOOR COORDINATORS FOR LABELED FIRE DOORS
Reversible, low friction, automatic coordinating devices for use on pairs of doors
with or without astragal to prevent the active door from closing ahead of the inactive
door. Used on labeled re doors with Ives automatic ush bolts. Exclusive design
incorporates unique cam tour and nylon coated strike, in conjunction with a nylon
roller which reduces friction as well the critical requirements of installation.
Nylon coated strike plate enables single-screw, centerpoint mounting for simplied
installation. The drop of the arm is mufed by shock absorbing polyurethane foam tape.
Solid Brass. One per box, with installation instruction, sheet metal and machine
screws for door bracket, wood and machine screws for strike plate, and coordinator base.
COR7G (469)
No Astragal or Astragal on Active Door - Doors from 3’4" to 4'.
Astragal on Inactive Door - Doors from 2’4" to 3’4".
Astragal on Both Doors - Doors from 2’4" to 2’10".
IVCOR7G-26D Satin Chrome 63.60
IVCOR7G-10 Satin Bronze 76.50
IVCOR7G-10B Dark Bronze 76.50
B
COR9G (469 1/2)
U.L. Listed for use as re exit hardware. Conforms to Federal Spec. NO. 836.
Astragal on Inactive Door - Doors over 3’4".
Astragal on Both Doors - Doors over 2’10".
IVCOR9G-3 Polished Brass 86.50
IVCOR9G-4 Satin Brass 86.50
IVCOR9G-10 Satin Bronze 86.50
IVCOR9G-26 Polished Chrome 103.20
IVCOR9G-26D Satin Chrome 72.90
DUST PROOF STRIKES
For Use With All IVES Automatic, Self-Latching and Manual Flush Bolts
Will not lock up or down. Spring tension calibrated for positive closing and eliminates
binding. DP1 plate used for ush oor conditions.
IVDP1-3 Polished Brass 23.50
IVDP1-10 Satin Bronze 23.50
IVDP1-26D Satin Chrome 23.50
IVDP2-3 Polished Brass 29.70
IVDP2-26D Satin Chrome 29.70
DP1
DP2
Threshold only
Floor and/or threshold
Go To Table of Contents
ENCYCLOPEDIA OF LOCKSMITH SUPPLIES
1.800.652.2835 299
www.acclock.com
Accredited Lock Supply
AUTOMATIC FLUSH BOLTS FOR LABELED METAL AND
WOOD FIRE DOORS
Designed for hollow-metal, steel-covered or wood-covered composite re door
applications only. Recommended for doors that are normally held open or subject
to low frequency use. Installed, top and bottom, on inactive leaf of a pair of doors.
Fits 1 3/8" - 2 1/4" thick doors.
With positive latching and automatic unlatching features. Top and bottom bolts
with full 15/16" throw; backset: 3/4". Bolt heads are equipped with bi-metal thermal
lock safety device. Carry bar not required for astragal protection.
Brass. Nickel-plated, corrosion resistant shaft assembly. Packed one pair per
box, with template and instructions for installation.
AUTOMATIC LOCKING FEATURE
When both re doors are closed the ROD HEADS (top and bottom) will extend
approximately 15/16" (23.8") beyond guides. During normal operation when active
door is opened, bolts will retract and inactive door will be free to open. However,
during a re, when the temperature reaches about 170-180 degrees F. (76.7-82.2C.)
the bi-metal locking arms on the rod heads begin to spread. These arms prevent
the rod heads from retracting and keep the inactive door permanently locked.
IVFB31P-32D Satin Chrome
IVFB31P-3 Polished Brass
per pair One pair in a box.
17510
FB31P
Listed for use on the inactive leaf of a pair of classied hollow-metal re doors with a
maximum rating of three hours, not exceeding 9 feet in height; and on steel covered
composite re doors not exceeding 8 feet high. Fits standard A.N.S.I door and frame
preparation. Built-in, self-aligning rods(axial play); no height adjustment required.
Machine screws furnished for bolts, guides and standard strikes; sheet metal
screws and lead shields for optional installation of standard bottom strike in concrete
oor. Shims, sheet-metal and machine screws furnished for wear plate.
FB41P
Listed for use on the inactive leaf of a pair of classi-
ed wood-covered composite re doors, swinging in
pairs, not exceeding 1 1/2 hour re rating or 8 feet
in height. Simplied router mortise installation at
the top and bottom corners of the door.
Furnished with sheet metal screws for bolts and
strikes, and lead shields for the optional installation
of standard bottom strike in a concrete oor. Sheet
metal screws and shims furnished for wear plates.
Machine screws for 1 3/4" standard door and bear-
ing washers also supplied to reinforce door cutout.
ILFB41P-32D Satin Stainless Steel
ILFB41P-3 Polished Brass
AUTOMATIC FLUSH BOLTS
 •HINGES
18310 per pair
One pair in a box.
B
3PB1
3CB1
ARCHITECTURAL HINGES
• For standard weight doors
• Low frequency usage
• Packed with wood and machine screws
Not for use with a door closer
• For standard weight doors
• Medium frequency usage
• Packed with wood and machine screws
3CB1HW for Heavy Weight Doors
• For automatic closing of doors
• Packed with wood and machine screws
Available in these sizes:
4.5" x 4.5"
4.5" x 4"
5" x 4.5" (3CB1HW)
Specify NRP for non-removable pin
Available in the following nishes:
600 Primed for Paint
605 Bright Brass (3CB1HW)
630 Satin Stainless Steel
632 Bright Brass
633 Satin Brass
639 Satin Bronze
643 Satin Bronze, Blackened
651 Bright Chrome
652 Satin Chrome
Available in these sizes:
4.5" x 4.5"
4.5" x 4"
Available in the following nishes:
600 Primed for Paint
630 Satin Stainless Steel
632 Bright Brass
633 Satin Brass
639 Satin Bronze
643 Satin Bronze, Blackened
651 Bright Chrome
652 Satin Chrome
Available in these sizes:
4.5" x 4.5"
Available in the following nishes:
600 Primed for Paint
630 Satin Stainless Steel
632 Bright Brass
633 Satin Brass
639 Satin Bronze
643 Satin Bronze, Blackened
651 Bright Chrome
652 Satin Chrome
3SP1
Spring Hinge
Go To Table of Contents
300
www.acclock.com
Accredited Lock Supply
FLUSH BOLTS
Individually polybagged with screws.
358 LABELED WOOD DOOR EXTENSION FLUSH BOLT
Specically designed for installation in all types of labeled wood covered composite
doors. Requires only simple router mortise at top and bottom corners of the door.
Top and bottom strikes comply with A.N.S.I. standard dimensions for manual bolts.
Fits 1 3/8" to 2 1/4" thick doors. Not available for Rabbeted door installation.
Individually polybagged; two per box, with template, sheet metal screws for
bolts and strikes, and machine screws(for standard 1 3/4" thick door) and bearing
washers to reinforce door cutout.
Code Finish Backset Dia. of Bolt Head Throw Price
of Rod Bolt Head Material
IVFB358-10B Dark Bronze 3/4" 1/2" Brass 3/4" 34.00
IVFB358-26D Satin Chrome 3/4" 1/2" Brass 3/4" 34.00
IVFB358-3 Polished Brass 3/4" 1/2" Brass 3/4" 34.00
457 and 458 EXTENSION FLUSH BOLTS FOR METAL DOORS
Listed for use in hollow metal, metal clad, steel covered composite and sheet metal
doors. Provides simplied installation in metal frames - round bolt head requires
only a punched hole; use of strike optional. Specially designed guide and the bolt’s
at side prevents turning.
Standard rod length: 12". Extruded Brass.
Packed with combination machine and wood screws for all parts.
Code Finish Backset Dia. of Bolt Head Throw Price
of Rod Bolt Head Material
IVFB457-10 Satin Bronze 3/4" 1/2" Brass 3/4" 25.20
IVFB457-26D Satin Chrome 3/4" 1/2" Brass 3/4" 25.20
IVFB457-3 Polished Brass 3/4" 1/2" Brass 3/4" 25.20
IVFB457-10B Dark Bronze 3/4" 1/2" Brass 3/4 25.20
IVFB458-10 Satin Bronze 3/4" 1/2" Brass 3/4" 21.30
IVFB458-26D Satin Chrome 3/4" 1/2" Brass 3/4" 19.90
IVFB458-3 Polished Brass 3/4" 1/2" Brass 3/4" 21.30
IVFB458-10B Dark Bronze 3/4" 1/2" Brass 3/4" 21.30
261
High quality compact cast ush bolt. Deep cut provides good nger hold for easy
operation. Unique spring design holds bolt automatically in retracted or projected
position.
Code Finish Backset Dia. of Bolt Head Throw Price
of Rod Bolt Head Material
IV261B26D Satin Chrome 15/32" 5/16" Brass 3/4" 20.70
IV261B3 Polished Brass 15/32" 5/16" Brass 3/4" 18.10
262
Exceptionally smooth working, superior quality cast ush bolt. Double action
spring design provides automatic holding of bolt in projected or retracted position.
Code Finish Backset Dia. of Bolt Head Throw Price
of Rod Bolt Head Material
IV262B26D Satin Chrome 15/32" 1/2" Brass 1" 30.40
IV262B3 Polished Brass 15/32" 1/2" Brass 1" 26.40
263
Moderately priced, deluxe quality line of hand polished, cast ush bolts. Designed
for easy, fast, low cost installation. Features rounded face plate and lip for simpli-
ed door preparation. Deep cup nger hole and double action spring combine to
ease both the operation and automatic holding of the bolt in either projected or
retracted position.
Code Finish Backset Dia. of Bolt Head Throw Price
of Rod Bolt Head Material
IV263B26D Satin Chrome 15/32" 5/16" Brass 3/4" 20.70
IV263B3 Polished Brass 15/32" 5/16" Brass 3/4" 18.00
IV263B5 Antique Brass 15/32" 5/16" Brass 3/4" 20.70
264
Compact, moderately priced, deluxe quality cast ush bolt. Extra long lip permits
applications in a variety of construction designs.
Code Finish Backset Dia. of Bolt Head Throw Price
of Rod Bolt Head Material
IV264B26D Satin Chrome 15/32" 5/16" Brass 3/4" 20.70
IV264B3 Polished Brass 15/32" 5/16" Brass 3/4" 18.00
Standard 457B and 458B extension ush bolts have been listed by Underwriters
Laboratories for use on Class A, B, C, D, and E labeled doors.
FLUSH BOLTS
U.L. LABELED EXTENSION FLUSH BOLTS
B
Go To Table of Contents
ENCYCLOPEDIA OF LOCKSMITH SUPPLIES
1.800.652.2835 301
www.acclock.com
Accredited Lock Supply
FB51P FOR METAL DOORS
Used for labeled hollow metal re doors, not exceeding 9 feet in height, and on
steel-covered composite re doors, not exceeding 8 feet in height; both with a
maximum rating of three hours.
Fits ANSI A115.4 door preparation for manual bolts. Spring actuated; manually
retracted.
Sold in pairs.
SB453 SURFACE BOLT
Hand polished, all-steel construction for heavy duty use. Rod: 3/4" wide x 1/4"
thick. 1 3/16" extra long throw for added security. 1 5/16" projection with an
overall width of 2 1/32".
Individually polybagged with strike specied, and both machine and sheet metal
screws.
Code Length Finish Price
IVSB453-8-TB-2C 8" Zinc 38.30
IVSB453-12-TB-2C 12" Zinc 48.30
IVSB453-8-TB-10 8" Satin Bronze 46.10
IVSB453-12-TB-10 12" Satin Bronze 51.60
IVSB453-8-TB-26D 8" Satin Chrome 47.20
IVSB453-12-TB-26D 12" Satin Chrome 59.60
SB454 SECURITY SURFACE BOLT
Designed specically to prevent manipulation. Positively holds bolt in locked position.
Hand polished, all-steel construction for heavy duty use. Rod: 3/4" wide x 1/4"
thick. 1 3/16" extra long throw for added security. 1 5/16" projection with an overall
width of 2 1/32"
8" and 12": Individually polybagged with U.S. and M.S. template, and both machine
and sheet metal screws. 5": Individually polybagged, packed with U.S., with 1/8"
shim, installation and sheet screws only.
Code Length Finish Price
IVSB454-12-TB-10 12" Satin Bronze 43.5
SELF-LATCHING FLUSH BOLTS
U.L. Listed. Brass Components.
Specially designed for installation in pairs on the inactive leaf of paired door openings
where the inactive leaf is not required for exit purposes. Doors must be equipped
with a coordinator. Sold in pairs.
IVFB51P-32D Satin Stainless Steel
IVFB51P-3 Polished Brass
IVFB51P-10 Satin Bronze
17510
SB1630 CONCEALED SCREW SECURITY SURFACE BOLT
Body: 8" long x 7/8" wide x 3/4" thick
Overall Knob or Lock Housing Projection: 1 1/2"
Top Strike: 1 1/4" wide x 7/8" tall x 15/16" deep
Bottom Strike: 3" long x 1" wide x 1/8" thick
IVSB1630B-26D Bottom Bolt Satin Chrome 54.00
IVSB1630BL-26D Locking Top Bolt Satin Chrome 98.20
IVSB1630T-2G Top Bolt Zinc Plated 42.10
IVSB1630T-26D Top Bolt Satin Chrome 59.40
IVSB1630TB-10B Top/Bottom Bolt Dark Bronze 103.50
IVSB1630TBL-10B Top/Bottom Locking Dark Bronze 133.60
IVSB1630TBL-26D Top/Bottom Locking Satin Chrome 117.60
IVSB1630TL-26D Top/Bottom Satin Chrome 106.80
18480
FB61P FOR WOOD DOORS
Used with labeled wood-covered composite re doors not exceeding a 1 1/2 hour
re rating in 8 feet in height.
HEAVY DUTY SECURITY SURFACE BOLTS
Listed by Underwriters Laboratories for use on the inactive leaf of a pair of doors.
IVFB61P-3 Polished Brass
IVFB61P-10 Satin Bronze
IVFB61P-32 Polished Stainless Steel
IVFB61P-32D Satin Stainless Steel
SELF LATCHING DLUSH BOLTS
HEAVY DUTY SECURITY SURFACE BOLTS
• Standard Surface Bolt has 1" throw
• Ideal for all types of doors
• Fully concealed mounting prevents vandalism
• Available in locking version. Unit locks in both
the up and down position. Locking bolts are
furnished with 2 keys in 4 keying variations.
• Units packed with wood and machine screws
to meet most eld conditions.
• Constructed of heavy duty steel
• UL listed up to 3 hours when used on the in-
active door of a pair up to 8' in height.
• Meets ANSI/BHMA A156.16, L84161
B
Go To Table of Contents
302
www.acclock.com
Accredited Lock Supply
“QUICK STALL” FLEXIBLE DOOR STOP
Burnished Wrought Steel. Safe, practical, simple to install.
Individually polybagged, 50 per box; with sheet metal screws for wood or metal
application.
Code Projection Finish Price
IV060F14 3" Bright Nickel 1.00
IV060F3 3" Bright Brass 1.00
IV061F14 4" Bright Nickel 1.10
IV061F3 4" Bright Brass 1.10
HINGE PIN FOR DOOR STOPS
The solution for locations where the installation of a standard door stop creates
problems. Can be used on most types of hinged doors, while protecting walls,
furniture and doors. Removable bushings accommodate 1/4" to 5/16" diameter
hinge pins.
69
Burnished Wrought Steel. Positive slip-proof adjustment for door opening from
70;dg to 100;dg. Unbreakable, heavy gauge steel for a lifetime of service.
Individually polybagged; 20 per box.
IV69F3 Bright Brass 4.00
70
Burnished Cast Aluminum. For narrow trim installation. Provides a wide range
of angular adjustment, from 85o to 125o. Permanently molded and cross-section
designed. Features high quality rubber bumpers.
IV70A3 Polished Brass 2.10
IV70A92 Aluminum 2.10
ROLLER BUMPERS
Hand Polished Cast Brass roller bumpers eliminate the possibility of interlocking
knobs, or of interfering doors from striking each other.
Individually packed with sheet metal screws; 2 per box.
RB470
Offset Arm type; used where two left hand or two right hand doors interfere, meeting
a odd angles in a corner. Conforms to Federal Spec. No. 1342.
Base: 1 5/8" x 2 1/4". Projection: 2 3/4". Reach: 2 3/4".
IVRB470-26D Satin Chrome 34.50
IVRB470-3 Polished Brass 27.50
RB471
Straight Stem type; used where the doors in a corner are of opposite type. Base:
2" diameter. Projection: 4 1/2". Conforms to Federal Spec. No. 1341.
IVRB471-26D Satin Chrome 31.20
IVRB471-3 Polished Brass 26.00
RB472
Straight stem type; used where the doors in a corner are of opposite type. Base:
2" diameter. Projection: 6". Conforms to Federal Spec. No. 1341A.
IVRB472-26D Satin Chrome 32.90
IVRB472-3 Polished Brass 27.60
DOOR SILENCERS
Gray Rubber. For use on metal frames. Packed 100 per polybag with 1 inserter.
IVSR64 29.30/bag
Gray Rubber. For use on wood frames. Packed 100 per polybag with 1 inserter.
IVSR65 29.30/bag
Gray Rubber. Self adhesive, requires no drilling of frame. Packed in sheets of 100.
IVSR66 29.30/sheet Specify Brown, Grey or White
WALL DOOR STOP
Self-adhesive bumper for use on clean, smooth at surfaces only - glass, tile,
metal, plaster or wood.
Material: Molded elastomeric Polymer. Overall Diameter: 1 7/8". Projection: 5/8".
Packed 20 per box.
IV411R-G Gray Rubber
IV411R-W White Rubber 260ea.
DOOR SILENCERS HINGE PIN DOOR STOP ROLLER BUMPERS
Metal Frame Wood Frame FLEXIBLE DOOR STOP
SR64 SR65 SR66 411R
B
RB470 RB471, RB472
Replacement tip:
IV09-310 Replacement tip:
IVWSPART.1075
Replacement roller package: IV09-137-626
Go To Table of Contents
ENCYCLOPEDIA OF LOCKSMITH SUPPLIES
1.800.652.2835 303
www.acclock.com
Accredited Lock Supply
HEAVY DUTY DOOR STOPS AND HOLDERS
Finest quality, heavy duty door stops designed specially for commercial applica-
tions, public buildings and high trafc areas.
Hand Polished Cast Brass.
HEAVY DUTY DOOR STOPS
Finest quality, heavy duty door stops designed specially for commercial and public
buildings. Features non-marring rubber tip.
Hand Polished Cast Brass
WS443 WALL STOP
Conforms to Federal Spec. No. 1320E
Projection: 3 5/8". Base Diameter: 2 1/4".
Packed individually with expansion shields; 2 per box.
IVWS443-3 Polished Brass 32.00
IVWS443-10 Satin Bronze 38.50
IVWS443-26D Satin Chrome 38.50
IVWS443-4 Satin Brass 39.90
FS444 FLOOR STOP
Conforms to Federal Spec. No. 1328E. Designed for doors with undercut up to 2 1/2".
Height: 3". Base Diameter: 2 1/2".
Packed individually with expansion shields; 2 per box.
IVFS444-3 Polished Brass 24.40
IVFS444-10 Satin Bronze 24.40
IVFS444-26D Satin Chrome 23.50
WS447 WALL STOP
Conforms to Federal Spec. No. 1320. Designed for doors with undercut up to 2 81/2".
Height: 3 5/8". Base Diameter: 2 1/4".
Packed with screws; 2 per box.
IVWS447-3 Polished Brass 29.10
IVWS447-10 Satin Bronze 34.90
IVWS447-26D Satin Chrome 34.90
IVWS447-26 Polished Chrome 34.90
FS448 FLOOR STOP
Conforms to Federal Spec. No. 1328. Designed for doors with undercut up to 2 1/2".
Height: 3". Base Diameter: 2 1/2".
Packed with screws: 2 per box.
IVFS448-3 Polished Brass 27.40
IVFS448-10 Satin Bronze 27.40
IVFS448-26D Satin Chrome 27.40
IVFS448-28 Polished Aluminum 20.10
WS445 WALL STOP
Conforms to Federal Spec. No. 1321E.
Projection: 3 5/8". Base Diameter: 2 1/4".
Packed with screws and expansion shields; 2 per box.
IVWS445-3 Polished Brass 50.80
IVWS445-10 Satin Bronze 60.90
IVWS445-26D Satin Chrome 60.90
IVWS445-15 Satin Nickel 63.30
FS446 FLOOR STOP
Conforms to Federal Spec. No. 1329E.Designed for doors with undercut up to 2 1/2".
Projection: 3 5/8". Base Diameter: 2 1/2".
Packed with screws and expansion shields; 2 per box.
IVFS446-3 Polished Brass 48.40
IVFS446-10 Satin Bronze 48.40
IVFS446-26D Satin Chrome 34.40
IVFS446-28 Polished Aluminum 24.70
WS449 WALL STOP
Conforms to Federal Spec. No. 1321.
Projection: 3 5/8". Base Diameter 2 1/4".
Packed with screws; 2 per box.
IVWS449-3 Polished Brass 48.50
IVWS449-10 Satin Bronze 58.10
IVWS449-26D Satin Chrome 58.10
FS450 FLOOR STOP
Conforms to Federal Spec. No. 1329. Designed for doors with undercut up to 2 1/2".
Projection: 3 5/8". Base Diameter: 2 1/2".
Packed with screws; 2 per box.
IVFS450-3 Polished Brass 51.40
IVFS450-10 Satin Bronze 51.40
IVFS450-26D Satin Chrome 37.40
IVFS450-28 Polished Aluminum 27.80
FS451 FLOOR STOP
Conforms to Federal Spec. No. 1329E.Designed for doors with undercut up to 2 1/2".
Projection: 3 1/8". Base: 2 11/16"(L), 1 5/8"(W).
Individually polybagged; 2 per box. Plate and holder furnished with sheet metal
screws.
IVFS451-10 Satin Bronze 51.00
IVFS451-3 Polished Brass 51.00
HEAVY DUTY DOOR STOPS HEAVY DUTY DOOR STOPS AND HOLDERS
Wall Floor
B
Replacement tip for WS443, WS445, WS446,
WS447, WS448, WS449, FS450 -
IV09-316 1.90
Go To Table of Contents
304
www.acclock.com
Accredited Lock Supply
FLOOR DOOR STOPS BASE DOOR STOPS
Indicidually polybagged; 10 per box.
430 FLOOR STOP
Base Diameter: 1 1/4". Height: 1 5/16". With replaceable rubber tip. Machine
Polished Cast Brass. Individually polybagged.
IV430MB5 Antique Brass 16.40
IV430MB26 Bright Chrome 16.40
FS434 FLOOR STOP
For undercut doors. Wrought steel with soft, resilient rubber.
Overall Length: 2 3/4". Width: 1 5/8". Height: 2 1/8".
Individually polybagged; with sheet metal screws and plastic anchor.
IVFS434-2C Zinc 8.00
FS441 FLOOR STOP
For doors, undercut to 1 1/2". Width non-marring rubber tip.
Overall Length: 2 11/16". Width: 1 5/8". Height: 2 1/8". Supplied with metal screws.
Hand Polished Cast Brass. Individually polybagged.
IVFS441-3 Polished Brass 20.70
IVFS441-26D Satin Chrome 20.00
FS442 FLOOR STOP
For doors, undercut to 2". With non-marring rubber tip.
Overall Length: 2 11/16". Width 1 5/8". Height: 2 7/8".
Meets Federal Specs. - Type 1328.
Hand Polished Cast Brass. Individually polybagged.
IVFS442-4 Satin Brass 24.30
IVFS442-10 Satin Bronze 24.30
60 DOOR STOP
Machine Polished Cast Brass. Projection: 3 3/4"
IV60MB3 Polished Brass 11.20
IV60MB5 Antique Brass 11.20
IV60MB26 Bright Chrome 14.70
IV60MB26D Satin Chrome 14.70
61 DOOR STOP
Machine Polished Cast Brass.
Projection: 3". Conforms to Federal Spec. 1322
IV61MB3 Polished Brass 11.20
IV61MB26 Bright Chrome 14.70
IV61MB26D Satin Chrome 11.20
062 DOOR STOP
Machine Polished Cast Brass.
Projection: 2 1/2". Conforms to Federal Spec. 1323.
IV062MB3 Polished Brass 9.10
IV062MB5 Antique Brass 7.40
IV062MB26 Bright Chrome 9.10
IV062MB15A Satin Nickel, Blackened 9.10
62 DOOR STOP
Machine Polished Cast Brass.
Projection: 4 1/2"
IV62A3 Aluminum, Bright Brass 4.50
IV62MB3 Polished Brass 13.70
64 DOOR STOP
Machine Polished Cast Brass. Projection: 3 1/4".
IV64MB3 Polished Brass 10.00
IV64MB26D Satin Chrome 12.90
WS65 DOOR STOP
Brushed Cast Aluminum. Projection: 3 3/4".
Individually polybagged, 20 per box; with sheet metal screws.
IVWS65A3 Polished Brass 4.20
IVWS65US27 Aluminum 4.20
FLOOR DOOR STOPS
BASE DOOR STOPS
B
Go To Table of Contents
ENCYCLOPEDIA OF LOCKSMITH SUPPLIES
1.800.652.2835 305
www.acclock.com
Accredited Lock Supply
DOME DOOR STOPS
Hand Polished Cast Brass. With gray, non-marring rubber bumper.
Individually polybagged with wood screws and plastic anchors; 10 per box.
FS436
For doors without threshold. Conforms to Fed Spec. No. 1330.
Height: 1" Base: 2" x 1 5/8". Stud Projection: 3/4".
IVFS436-3 Polished Brass 5.90
IVFS436-10 Satin Bronze 6.90
IVFS436-26 Bright Chrome 6.20
IVFS436-26D Satin Chrome 5.00
FS438
For doors with threshold or undercut doors. Conforms to Fed Spec. No. 1330A.
Height: 1 5/8". Base: 2" x 1 5/8". Stud Projection:3/4".
IVFS438-3 Polished Brass 7.00
IVFS438-10 Satin Bronze 8.00
IVFS438-26 Bright Chrome 7.50
IVFS438-26D Satin Chrome 5.60
DOOR HOLDERS
DOORS STOPS AND HOLDERS DOME DOOR STOPS
•LOCKGUARDS
FS452 DOOR HOLDER
Features rugged construction, stainless steel spring and foot-operated replaceable
rubber tip. Commercial use; allows door to stay open in desired position. Conforms
to Federal Spec. No. 1149A-4" and Federal Spec. No. 1149B-5" - brass only.
Hand Polished Cast Brass.Individually polybagged with sheet metal screws;10
per box.
Code Arm Length Finish Price
IVFS452-3-4 4" Polished Brass 26.50
IVFS452-26D-4 4" Satin Chrome 25.50
IVFS452-26D-5 5" Satin Chrome 31.60
IVFS452-3-5 5" Polished Brass 36.70
FS455 DOOR HOLDER
Provides quality and sturdy construction with economy. Features stainless steel
spring and foot-operated replaceable rubber tip. Allows door to stay open in
desired position.
Arm Length: 4". Conforms to Federal Spec. No. 1149A - brass only. Available in
Machine Polished Cast Brass or Burnished Cast Aluminum. Individually polybagged
with sheet metal screws; 10 per box.
Code Material Finish Price
IVFS455A3 Aluminum Polished Brass 7.10
IVFS455A27 Aluminum Satin Aluminum 7.10
IVFS455MB3 Brass Polished Brass 28.80
IVFS455MB26D Brass Satin Chrome 34.50
LOCK GUARDS
P/N Material Size Price
IVLG10-USP Steel, Prime Painted 2 1/2" x 9 1/2" 23.60
IVLG10-32D Stainless Steel 2 1/2" x 9 1/2" 34.70
IVLG12-USP Steel, Prime Painted 1 1/2" x 9 1/2" 23.60
IVLG12-32D Stainless Steel 1 1/2" x 9 1/2" 32.30
IVLG14-32D Stainless Steel 2 9/16" x 9 1/2" 50.90
LG10, LG12 LG14
B
Replacement tip:
IVFSPART.1075
Go To Table of Contents
306
www.acclock.com
Accredited Lock Supply
401 SERIES WALL BUMPERS
Positive attachment to the wall by tamper proof, concealed set screw. Soft,
high grade light gray rubber cushion. The special retainer cup makes the rub-
ber almost impossible to remove from the bumper.
Hand Polished Cast Brass. Individually polybagged, 10 per box; with socket
head set screws
RUBBER WALL BUMPERS
Concave Convex Cast Wrought
P/N 3 5 10 10B 26 26D 28 32D
WS401CCV 14.90 17.20 17.20 17.20 17.20
WS401CVX 14.90 17.20 17.20 17.20 17.20
WS402CCV 14.90 17.20 17.20 17.20 17.20 17.20
WS402CVX 14.90 17.20 17.20 17.20 17.20 11.00
WS404CVX 5.20 6.20 6.20 6.20 6.20 6.20
WS406CCV 3.60 3.90 3.90 3.90 3.50 2.90
WS406CVX 3.60 3.90 3.90 3.50 3.90 2.90
WS407CCV 3.60 4.10 4.10 4.10 4.10 3.60 2.90
WS407CVX 3.60 4.10 4.10 4.10 4.10 3.60 2.90
406 SERIES WALL BUMPERS
Lower cost alternative to the 401 Series; identical in size and similar in func-
tion, with high quality Ives nish. Hand Polished Wrought Brass. Individually
polybagged, 10 per box; with socket head set screws
WS401CVX WS401CCV WS402CVX WS402CCV WS404CVX
WS406CVX WS406CCV WS407CVX WS407CCV
B
Go To Table of Contents
ENCYCLOPEDIA OF LOCKSMITH SUPPLIES
1.800.652.2835 307
www.acclock.com
Accredited Lock Supply
For use of on cabinet doors; the ideal catch when concealed hardware is desired. Eliminates the
need for pulls or knobs while enhancing styling and the clean look of ne furniture and cabinets.
Narrow case design for minimum obstruction; facilitates cleaning and painting.
Features heavy gauge parts. Simple installation with metal template; no mortising required.
CL11, CL12 and CL14 are designed for larger doors and panels.
Individually polybagged with screws template and instructions for installation.
For use on doors, drawers and cabinets. Size: C-C Projection: 1 5/16".
Diameter: 5/16".
Hand Polished Solid Brass; polished brass nish. Individually polybagged, 10
per box; with 1" x 8-32 Truss Head machine screws.
PUSH LATCH
DRAWER PULLS HEAVY DUTY MAGNETIC CATCHES
MIGHTY-MITE® HEAVY DUTY MAGNETIC CATCHES
Designed for full length doors. Features self-aligning pole piece and magnet.
Unique aluminum case design permits surface mounting or mortising into
stop. Individually polybagged with instructions, sheet metal screws, 1 long
and 2 short strikes; 10 per box.
DUAL TRIPLE POLE
IV327A3 3 1/8" x 3/4" Steel-Brass 13.00
IV327A92 3 1/8" x 3/4" Steel-Aluminum 13.00
DUAL DOUBLE POLE
IV326A3 3 1/8" x 9/16" Steel-Brass 7.60
IV326A92 3 1/8" x 9/16" Steel-Aluminum 7.60
HEAVY DUTY MAGNETIC CATCHES
DRAWER PULLS PUSH LATCHES
CL14
CL11
CL12
Code Finish Price
IVCL11-US3 Polished Brass 36.40
IVCL11-US4 Satin Brass 28.70
IVCL11-US26D Satin Chrome 28.70
IVCL12-US4 Brass-Satin Brass 38.60
IVCL12-US10 Satin Bronze 38.60
IVCL12-US26D Satin Chrome 38.60
IVCL12-US3 Polished Brass 43.60
IVCL14-US3 Polished Brass 38.60
IVCL14-US4 Brass-Satin Brass 32.30
IVCL14-US10 Satin Bronze 32.30
IVCL14-US26D Satin Chrome 32.30
P/N C-C" 3 5 26 26D
IV33 5 7.60 7.90
IV34 6 8.50 8.11 9.80
IV36 3 5.30 5.80 6.10
IV37 3 1/2 5.80 6.40 6.70 6.70
IV38 4 7.00
IV133-3" 3 16.20 13.52
IV133-3 1/2" 3 1/2 19.40
IV133-4" 4 20.20
IV137 8.30 9.50
B
C to C: 3"
Overall: 3 1/2"
Projection: 7/8"
Cast Brass or
Aluminum
No. 137
Go To Table of Contents
308
www.acclock.com
Accredited Lock Supply
ELBOW CABINET CATCH
Used on the inactive side of a pair of cabinet doors. Plated
dimensions: 1 3/8" x 5/8". Conforms to Federal Spec. No.
1075. Packed with screws.
Code Material Finish Price
IV2A3 Aluminum Bright Brass 3.80
IV2A92 Aluminum Aluminum 3.80
IV2A15 Aluminum Satin Nickel 4.20
ROLLER CATCH
Full lip style strike simplied mortising.
Code Strike Strike Lip Finish Price
IV333B26 2 1/4" x 1 5/8" 1 3/16" to center Polished Chrome 8.80
IV333B5 2 1/4" x 1 5/8" 1 3/16" to center Antique Brass 8.80
ADJUSTABLE-TENSION ADJUSTABLE ROLLER CATCH
Full lip strike for simplied mortising.
Code Strike Strike Lip Finish Price
IV335B3 2 1/4" x 1 5/8" 1 3/16" to center Polished Brass 13.00
IV335B26D 2 1/4" x 1 5/8" 1 3/16" to center Satin Chrome 15.50
IV335B5 2 1/4" x 1 5/8" 1 3/16" to center Antique Brass 15.50
ADJUSTABLE TENSION ADJUSTABLE ROLLER CATCH
Standard box type strike provides neat appearance.
Code Strike Strike Lip Finish Price
IV336B3 2 1/4" x 7/8" 1 1/8" to center Polished Brass 11.90
IV336B26D 2 1/4" x 7/8" 1 1/8" to center Satin Chrome 14.40
IV336B5 2 1/4" x 7/8" 1 1/8" to center Antique Brass 15.50
CUPBOARD TURN
A latch for cabinets and small doors.
Case: 1 3/4" x 1 1/8". Strike: 1 3/4" x 3/8".
Conforms to Federal Spec. No. 1082.
Hand Polished Cast Brass. Packed with
screws.
IV540B26D Satin Chrome 39.20
HEAVY DUTY ROLLER CATCHES FOR CABINET,
WARDROBE AND INTERIOR DOORS
Narrow, 2 1/4" x 7/8" faceplate and 3/4" x 1
3/4" bore enable easy installation on thin doors.
Smooth, positive latching action provided by
powerful conical spring. Durable, uniform-
action nylon roller. Quiet operation ensured
by special rubber washer which cushions
roller return.
Hand Polished Wrought Brass. Individually
polybagged with sheet metal screws.
DUAL ADJUSTMENT BALL CATCHES
Ideal for louvered, bi-folding, accordion, wardrobe and
service doors. The perfect catch to use with dummy
trim. Dual adjustment provides door holding and
clearance strength.
Faceplate: 2 1/8" x 1". Bore: 7/8" x 1 1/4".
Hand Polished Wrought Brass. Individually poly-
bagged with screws.
DUAL ADJUSTMENTS
FEATURE
For clearance and tension. Makes
it easy to compensate for swell-
ing, shrinking, drafts and weight
of doors.
A. Free rolling ball insures smooth, positive and trouble-free action.
B. Adjustable threaded barrel to compensate for various clearances of doors.
C. Adjustable spring tension for any desired action.
FOR CATCH IN DOOR INSTALLATIONS
Code Strike Strike Lip Finish Price
IV347B3 2 1/8" x 1 3/8" 7/8" to center Polished Brass 11.30
IV347B26D 2 1/8" x 1 3/8" 7/8" to center Satin Chrome 12.80
ADJUSTABLE TO CLEARANCE ONLY
For use on cabinets and small interior doors.
Faceplate: 1 1/2" x 3/4". Bore: 9/16" x 7/8".
Code Strike Strike Lip Finish Price
IV345B3 1 1/2" x 25/32" 13/32" to center Polished Brass 7.60
IV345B26D 1 1/2" x 25/32" 13/32" to center Satin Chrome 8.70
IV345B5 1 1/2 x 25/32" 13/32" to center Antique Brass 8.30
No. 346--narrow strike--designed
for use when action catch is
mounted in the jamb.
ROLLER CATCHES CABINET CATCHES CUPBOARD LATCH
Standard Adjustable Adjustable Tension Roller Elbow BALL CATCHES
B
115 CRASH STOPS
Plate Size: 1 1/2" x 1 1/2". Packed with sheet metal screws; 5 per box.
Code Overall Recommended Chain Price
Length Door Width Finish
IVCS115-25-26D 25 1/2" 36" Satin Chrome 46.30
IVCS115-30-26D 30 1/2" 42" Satin Chrome 51.40
IVCS115-30-3 30 1/2" 42" Polished Brass 37.90
STORM DOOR LATCH
Polished Wrought Brass for wood storm doors, 7/8" to 1 1/8" thick. Reversible; for
right or left hand inswinging or outswinging doors. Backset: 1 3/4". Knob Diameter:
1 3/4". Rose Diameter: 1 7/8". Lever Length: 1 3/4". Lever Projection: 1 7/8". Case
Diameter: 5/8". Case Length: 2 21/32". IV980B5, 19, 26 30.20
Go To Table of Contents
ENCYCLOPEDIA OF LOCKSMITH SUPPLIES
1.800.652.2835 309
www.acclock.com
Accredited Lock Supply
405 COAT AND HAT HOOK
Ideal for schools, dormitories and public areas. En-
gineered for extra strength and designed to withstand
unusual strain.
Burnished Cast Aluminum. Individually poly-
bagged with screw.
IV405A3 Bright Brass 2.40
IV405A5 Antique Brass 2.40
IV405A92 Aluminum 2.40
571 ALL-PURPOSE HOOK
3" projection. Conforms to Federal Spec. No. 1172 (brass),
No. 1172AL (aluminum).
Individually polybagged with screws. Brass (10 per box);
Aluminum (20 per box).
Code Material Finish Price
IV571A3 Aluminum Polished Brass 1.10
IV571A92 Aluminum Aluminum 1.10
IV571A5 Aluminum Antique Brass 1.70
IV571MB3 Brass Polished Brass 7.60
IV571MB4 Brass Satin Brass 9.10
IV571MB26D Brass Satin Chrome 9.10
IV571MB5 Brass Antique Brass 9.10
IV571MB10 Brass Satin Bronze 8.40
IV571MB15 Brass Satin Nickel 9.60
SECURITY SASH LOCK
Spring lever pulls rails together ot provide jimmy resistance and rattle-free t.
Hand Polished Wrought Brass. Individually polybagged with screws.
IV4B26 Polished Chrome 15.70
SASH FASTENERS
World-renowned Crescent sash fastener pioneered by Ives. Designed low to the
sash for superior strength and greater resistance to breakage. Vertical-horizontal
camming action lifts sash up and pulls them together for a snug, non-rattling
t. The heavy gauge, top quality springs provide snappy wearing action.
Code Material Finish Price
IV07A3 Aluminum Bright Brass 2.50
IV07A92 Aluminum Aluminum 2.50
IV07MB26 Brass BrightChrome 18.90
IV07MB26D Brass Satin Chrome 18.90
IV07MB3 Brass Polished Brass 15.50
IV07MB5 Brass Antique Brass 18.70
FRICTION CASEMENT ADJUSTER
With Positive Locking Device. 1" projection, 3/8" x 5/8" tube.
Constant friction and the wing nut locking feature secures casement windows
in any position.
Hand Polished Extruded Brass. Packed with screw.
Code Length Lbs. of Friction Finish Price
IV288B3-10 10" 15 Polished Brass 91.60
IV288B26D-10 10" 15 Satin Chrome 109.60
IV288B3-12 12" 15 Polished Brass 103.40
COAT AND HAT HOOK
Decorative design for commercial and residential
application. Height: 5". Projection: 3 3/4".
Base: 1 5/8"(H), 1 1/14"(W).
Solid Brass. Individually polybagged with screws;
IV574B3 Polished Brass 26.10
IV574B26 Bright Chrome 31.10
SASH LOCK WINDOW LOCKS CASEMENT ADJUSTER
SASH FASTENER HOOKS
B
Go To Table of Contents
310
www.acclock.com
Accredited Lock Supply
COAT AND HAT HOOK
All purpose hook for large hats. Size: 7".
Projection: 3 3/4". Solid Brass. Individually
polybagged with screws.
IV575B3 Polished Brass 22.90
IV575B5 Antique Brass 26.11
IV575B26D Satin Chrome 28.70
IV575B15A Satin Nickel Black 26.11
IV575A3 Alum, Brass Plated 4.60
IV575A92 Aluminum 4.60
ALL PURPOSE GARMENT HOOK
Useful where additional storage space is needed.
Solid Brass. Individually polybagged with screws
IV576B3 Polished Brass 19.71
IV576A3 Alum, Brass Plate 4.13
IV576B26 Polished Aluminum 20.00
UTILITY HOOK
All-purpose hook for utility areas.
Base: 1 3/16" x 15/16". Projection: 1 1/8".
Burnished Cast Aluminum.
Packaged two per bag.
IV577A3 Alum,Brass Plated 1.91
IV577A14 Alum, Brt.Nickel 2.04
IV577B26 Bright Chrome 4.71
IV577B26D Satin Chrome 4.71
572 ALL PURPOSE HOOK
Provides extra strength and durability. 3 1/16" projection. Ma-
chine Polished Cast Brass. Individually polybagged with screws.
IV572MB3 Polished Brass 10.40
IV572MB5 Antique Brass 13.10
IV572MB26 Bright Chrome 12.60
IV572MB26D Satin Chrome 12.60
IV572A3 Aluminum, Brass Plated 3.80
IV572A92 Aluminum 3.80
WARDROBE HOOK
All-purpose hook for areas with limited space.
Base: 1 1/8" x 1 1/8". Projection: 1 1/8". Machine
Polished Cast Brass. Individually polybagged
with screws.
IV582MB3 Polished Brass 6.90
IV582MB26 Bright Chrome 8.20
IV582MB5 Antique Brass 7.60
IV582MB26D Satin Chrome 8.20
IV582A3 Alum, Brass Plate 1.70
IV582A92 Aluminum 1.70
WARDROBE HOOK
All-purpose hook for low-prole situations.
Base: 1 1/8" x 1 1/8". Projection: 1 11/16".
Individually polybagged with screws.
IV581MB3 Polished Brass 5.20
IV581MB26 Bright Chrome 6.20
IV581MB26D Satin Chrome 6.20
IV581MB5 Antique Brass 6.20
IV581A3 Brass Plated Aluminum 1.50
IV581A92 Burnished Aluminum 1.50
IV581A-W Aluminum - White 2.20
IV581A-BLK Aluminum - Black 2.20
ALL PURPOSE CEILING HOOK
Ideal for use in closets. Projection: 2 1/4".
Individually polybagged with screws.
IV580A92 Aluminum 2.60
HOOKS
Wardrobe Utility Celing Garment Coat and Hat Multi-Purpose
B
Go To Table of Contents
ENCYCLOPEDIA OF LOCKSMITH SUPPLIES
1.800.652.2835 311
www.acclock.com
Accredited Lock Supply
SERIES 8300 PULL PLATES
Made from the nest architectural materials available. Each plate is
individually wrapped and boxed with mounting screws.
8302 PULL PLATE
Code Pull Size Plate Size Finish Price
(C to C)
IV8302-6B3 6" 3.5" x 15" Polished Brass 67.70
IV8302-6B10B 6" 3.5" x 15" Dark Satin Bronze 80.50
IV8302-6B26D 6" 3.5" x 15" Satin Chrome 71.20
IV8302-6PA28 6" 3.5" x 15" Satin Aluminum 29.70
IV8302-6S32D 6" 3.5" x 15" Satin Stainless Steel 40.50
IV8302-8B3 8" 4" x 16" Polished Brass 76.70
IV8302-8B26D 8" 4" x 16" Satin Chrome 80.30
IV8302-8PA28 8" 4" x 16" Satin Aluminum 29.80
8303 PULL PLATE
Code Pull Size Plate Size Finish Price
(C TO C)
IV8303-8B3 8" 3.5" x 15" Polished Brass 112.30
IV8303-8B26D 8" 3.5" x 15" Satin Chrome 116.10
IV8303-8PA28 8" 3.5" x 15" Satin Aluminum 37.60
IV8303-8B3 8" 4" x 16" Polished Brass 115.80
IV8303-8B26D 8" 4" x 16" Satin Chrome 119.70
IV8303-8PA28 8" 4" x 16" Satin Aluminium 37.10
8305 PULL PLATE
Code Pull Size Plate Size Finish Price
(C to C)
IV8305-6B3 6" 3.5" x 15" Polished Brass 71.60
IV8305-6B26D 6" 3.5" x 15" Satin Chrome 71.30
IV8305-6PA28 6" 3.5" x 15" Satin Aluminum 32.20
IV8305-8B3 8" 4" x 16" Polished Brass 102.20
IV8305-8B26D 8" 4" x 16" Satin Chrome 108.90
IV8305-8PA28 8" 4" x 16" Satin Aluminum 36.70
8311 PULL PLATE
Code Pull Size Plate Size Finish Price
(C to C)
IV8311-5B3 5" 3.5" x 15" Polished Brass 69.00
IV8311-5B26D 5" 3.5" x 15" Satin Chrome 75.80
IV8311-5B3 5" 4" x 16" Polished Brass 72.60
IV8311-5B26D 5" 4" x 16" Satin Chrome 79.30
IV8311-5PA28 5" 4" x 16" Satin Aluminum 40.00
DOOR PULLS
Made from the nest architectural materials available. Care-
fully machined, polished and inspected before individually
wrapped and packaged.
Packed with Ives standard type fasteners for 1 3/4" doors.
8102 DOOR PULLS
3/4" Round Bar Stock.
Code Center to Center Finish Price
IV8102-6B3 6" Polished Brass 44.80
IV8102-6B26D 6" Satin Chrome 44.80
IV8102-6PA28 6" Satin Aluminum 17.90
IV8102-8B3 8" Polished Brass 50.40
IV8102-8B26D 8" Satin Chrome 50.40
8103 DOOR PULLS
1" Round Bar Stock.
Code Center to Center Finish Price
IV8103-8B3 8" Polished Brass 89.40
IV8103-8B26D 8" Satin Chrome 89.80
IV8103-8PA28 8" Satin Aluminum 25.90
8112 DOOR PULLS
Standard Pull. Exposed Screws.
Mounting Surface: 1 7/8".
Code Center to Center Finish Price
IV8112-5B26D 5 1/5" Satin Chrome 36.10
8111 DOOR PULLS
Stand Pull. Concealed Screw.
Mounting Surface: 1".
Code Center to Center Finish Price
IV8111-5B3 5 1/4" Polished Brass 46.20
IV8111-5B10 5 1/4" Satin Bronze 51.60
IV8111-5B26D 5 1/4" Satin Chrome 49.40
IV8111-PA28 5 1/4" Aluminum 28.80
SERIES 8200 PUSH PLATES
Made from the nest architectural materials available. All
plates meet ANSI A156.6 requirements for .050" thickness.
Each plate is individually wrapped and packed with mounting
screws. 10 per pack.
Code Plate Size Finish Price
IV8200B3-3.5 3 1/2" x 15" Polished Brass 20.30
IV8200B26D-3.5 3 1/2" x 15" Satin Chrome 23.80
IV8200PA28-3.5 3 1/2" x 15" Satin Aluminum 9.50
IV8200B3-4 4" x 16" Polished Brass 23.80
IV8200S32D-4 4" x 16" Satin Stainless Steel 13.60
IV8200PA28-4 4" x 16" Satin Aluminum 9.00
DOOR PULL PUSH PLATE
PULL PLATES
B
Go To Table of Contents
312
www.acclock.com
Accredited Lock Supply
WEATHER-TITE® LETTER BOX PLATES
Used on door exteriors for letter-sized mail. Conforms to U.S. Post Ofce specica-
tions. Weather-Tite® construction features interlocking ap and frame for added
weather protection.
IV624, and IV625 are supplied with a bronze spring which augments gravity to
insure a tightly closed plate, and can be installed in vertical position. IV624B meets
the code requirements of the city and county of San Francisco, para. 4306 E.I. for
use on labeled corridor doors. Overall Size 10" x 3". Opening: 7 1/2" x 2".
Individually polybagged with template and screws.
COVERED BACK PLATE
Set consists of front plate and gravity type covered back plate.
Code Material Finish Price
IV624B26 Brass Polished Chrome 56.07
HOOD
Set Consists of front plate and hooded back plate.
Code Material Finish Price
IV625B10B Brass Oxidized Satin Bronze 66.50
CRASH STOPS LETTER-SIZE MAIL SLOT
STORM DOOR LOCKS
KICK PLATES
All kickplates are .050 thick. They come with #6 x 5/8 Phillips Oval Head undercut
stainless steel sheet metal screws, plated to match.
P/N Size Material & Finish Price
IV8400B3-8X30 8 x 30 Brass, Polished Brass 84.72
IV8400PA28-8X30 8 x 30 Satin Aluminum 25.68
IV8400S32D-8X30 8 x 30 Satin Stainless Steel 29.28
IV8400B3-8X32 8 x 32 Brass, Polished Brass 90.37
IV8400PA28-8X32 8 x 32 Satin Aluminum 27.39
IV8400S32D-8X32 8 x 32 Satin Stainless Steel 31.23
IV8400B3-8X34 8 x 34 Brass, Polished Brass 96.02
IV8400PA28-8X34 8 x 34 Satin Aluminum 29.10
IV8400S32D-8X34 8 x 34 Satin Stainless Steel 33.18
For doors 1 3/8" to 1 1/2" thick. Field reversible.
Clear pack, for retail display. 5/box
P/N Description Finish Price
IV990B26 Sliding Door Pull Polished Chrome 12.10
IV990B3 Sliding Door Pull Polished Brass 10.50
IV990B5 Sliding Door Pull Antique Brass 11.44
IV991B26 Sliding Door Privacy Polished Chrome 16.80
IV991B3 Sliding Door Privacy Polished Brass 14.70
IV991B5 Sliding Door Privacy Antique Brass 17.28
624
625
B
Hooded Back Plate
059 HANDRAIL BRACKET
Base: 2 1/4" x 1 3/8". Base to Center of Rail: 2
7/16". Burnished Cast Aluminum. Individually
polybagged with screws; 20 per box.
IV059A3 Brass Plated 3.20
IV059A92 Aluminum 3.20
59 HANDRAIL BRACKET
Base: 2 13/16" x 1 1/2". Base to Center of Rail; 2 3/4".
Conforms to Federal Spec. No. 1064B. Machine
Polished Cast Brass. Individually polybagged with
screws; 10 per box.
IV59MB3 Polished Brass 19.70
IV59MB26D Satin Chrome 22.60
Go To Table of Contents
ENCYCLOPEDIA OF LOCKSMITH SUPPLIES
1.800.652.2835 313
www.acclock.com
Accredited Lock Supply
COVERED BACK PLATE
Set consists of magnetic front plate assembly and gravity type covered back
plate. Overall Size: 12 1/2" x 3 1/4". Plate Opening: 11" x 1 7/8".
IV651B26 Polished Chrome 204.90
IV651B10B Oxidized Satin Bronze 170.72
IV651B15A Satin Nickel 213.10
HOOD
Set consists of magnetic front plate assembly and hooded back plate.
Overall Size: 12 5/8" x 3 1/16". Plate Opening: 11" x 1 7/8".
IV652B10 Satin Bronze 132.49
IV652B26 Polished Chrome 170.00
COVERED BACK PLATE
Set consists of spring loaded front plate and gravity type covered back plate.
IV621B10 Satin Bronze 86.69
IV621B15A Satin Nickel 108.20
HOOD
Set consists of spring loaded front plate and hooded back plate.
IV622B10B Oxidized Satin Bronze 116.90
SLEEVE FOR 620/621/622
Made of stainless steel for 1 3/4" hollow core doors. One per box.
WEATHER-TITE® MAGAZINE-SIZE LETTER BOX PLATES
Used on door exteriors for magazine-size mail. Conforms to U.S. Post Ofce
specications. Weather-Tite® construction features interlocking ap and
frame for added weather protection.
Rugged construction; bronze spring augments gravity to insure a tightly
closed plate. IV621B meets the code requirements of the city and county of
San Francisco, para. 4306 E.I. for use on labeled corridor doors.
Large Opening: 2".
Heavy-gauge Wrought Brass. Individually polybagged with screws and
template.
STANDARD BACK PLATE
Set consists of spring front plate and standard back plate.
IV620B3 Polished Brass 72.10
IV620B5 Antique Brass 88.90
IV620B26D Satin Chrome 86.40
IV620PA28 Polished Aluminum 45.00
WEATHER-TITE® PUSH-THROUGH LETTER BOX PLATES
Used on door exteriors for letter-size mail. Conforms to U.S. Post Ofce
specications. Weather-Tite® construction features interlocking ap and
frame for added weather protection. Bronze spring augments gravity to
insure a tightly closed plate.
IV627B meets the code requirements of the city and county of San Francisco,
para. 4306 E.I. for use on labeled corridor doors. IV626, IV627 and IV628
meet the code requirements of the City of New York, paragraph C-26-604.4(b).
Overall Size: 8 3/4" x 2 7/8".
Heavy-gauge Wrought Brass. Individually polybagged with screws and
template.
STANDARD BACK PLATE
Set Consists of spring loaded front plate and standard back plate.
IV626B5 Antique Brass 40.20
IV626B10 Satin Bronze 64.72
IV626B15A Satin Nickel 77.70
IV626B26 Polished Chrome 77.70
MAGNETRACTTM MAGAZINE SIZE LETTER BOX PLATES
Ideal for exterior doors; the projection lip assures easy grasp even when
wearing gloves. Magnetic inlays on the plate and ap augment gravity for a
weather-tite t and rattle-free installation.
Rugged construction; with massive extrusions for strength and weather
resistance, coupled with an exclusive interlocked hinge design that holds the
ap securely in place. Concealed pin permanently locks ap in plate; tamper
proof when used with sex bolts.
Heavy-gauge Wrought Brass. Individually polybagged with screws and
template
STANDARD BACK PLATE
Set consists of magnetic front plate assembly and standard back plate.
Overall Size: 12 1/2" x 3 1/4". Plate Opening: 11" x 1 7/8".
IV650B15A Satin Nickel 134.10
IV650B26 Polished Chrome 128.90
IV601
1750
COVERED BACK PLATE
Set consists of spring loaded front plate and gravity type covered back plate.
IV627B5 Antique Brass 65.50
IV627B15A Satin Nickel 65.50
IV627B26 Polished Chrome 65.50
HOOD
Set consists of spring loaded front plate and hooded back plate.
IV628B5 Antique Brass 41.44
MAGAZINE-SIZE MAIL SLOT PUSH THROUGH MAIL SLOTS
MAGNETIC MAGAZINE MAIL SLOT
B
Go To Table of Contents
314
www.acclock.com
Accredited Lock Supply
SCREEN DOOR PULL
For use on screen doors, as window lift or drawer pull.
Burnished Cast Aluminum. Overall Length: 4 7/8". Projection: 1 5/32".
Packaged 25 per pack
IV25A3 Bright Brass 1.70
IV25A92 Aluminum 1.70
FLUSH SLIDING DOOR PULLS
Used on sliding doors and doors which require a ush mounted pull.
Hand Polished Wrought Brass. Individually polybagged with two es-
cutcheon pins. 20 per box.
Code Bore Finish Price
IV220B5 2" Antique Brass 3.01
IV220B26D 2" Satin Chrome 3.50
IV220B26 2" Bright Chrome 3.50
IV221B3 2 1/8" Polished Brass 3.20
IV221B5 2 1/8" Antique Brass 3.20
IV221B26 2 1/8" Bright Chrome 3.80
IV221B26D 2 1/8" Satin Chrome 3.80
FINGER PULL
Used on sliding doors and doors requiring a ush
mounted pull. 3/4" bore.
Burnished Wrought Brass.
Packed 4 per polybag: 25 bags per box.
IV218B3 Polished Brass 9.20/BAG
IV218B10 Satin Bronze 17.50/BAG
IV218B15 Satin Nickel 9.20/BAG
IV218B26 Polished Chrome 12.40/BAG
IV218B26D Satin Chrome 12.40/BAG
IV218B10B Dark Bronze 17.50/BAG
FLUSH SLIDING DOOR PULL
Ideal for louvered, bi-folding or wardrobe doors.
Deluxe quality heavy gauge wide ange - 1 1/2" bore.
Hand Polished Wrought Brass. Individually polybagged
with brads; 20 per box.
IV225B3 Polished Brass 3.30
IV225B5 Antique Brass 3.60
SLIDING DOOR PULLS
For use on louvered, bi-fold or sliding wardrobe doors.
With extra deep recess & reverse tapered grip.
Size; 1 5/16" x 3 1/8".
Hand Polished Wrought Brass. Individually poly-
bagged with screws; 20 per box.
IV22B3 Polished Brass 2.90
IV22B5 Antique Brass 3.30
IV22B26 Bright Chrome 3.30
IV22B26D Satin Chrome 3.30
FLUSH SLIDING DOOR PULL
Ideal for louvered, bi-folding or sliding wardrobe doors.
Deluxe quality heavy gauge wide ange - 2 1/8" bore.
Hand Polished Wrought Brass. Individually polybagged
with screws; 20 per box.
IV226B5 Antique Brass 5.80
IV226B26 Bright Chrome 6.10
SLIDING DOOR PULLS
For use on louvered, bi-folding or sliding wardrobe
doors. With reverse tapered grip.
Size: 1 5/16" x 3 1/8".
Hand Polished Wrought Brass. Individually
polybagged with screws; 10 per box.
IV222B3 Polished Brass 19.40
IV222B5 Antique Brass 22.20
IV222B26 Bright Chrome 22.20
IV222B26D Satin Chrome 22.20
FINGER PULLS SLIDING DOOR PULL
DOOR PULL
B
Go To Table of Contents

Navigation menu