Locks MS1850SN 050 Series MS ANSI Deadlock/Hooklock
User Manual: Locks MS1850SN-050 Series MS ANSI Deadlock/Hooklock Mayflower Sales - Adams Rite
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Deadlocks MS1850SN-050 Series MS® Deadlock (ANSI Size) DL-15 MS1850SN-050 Series MS® Deadlock (ANSI Size) Operation 360° turn of key or thumbturn throws or retracts the counterbalanced bolt. Key can be removed only when bolt is in a positively locked or unlocked position. Lock accepts any standard 1-5/32" diameter mortise cylinder or thumbturn from either or both sides. Cylinder must have MS® dimensioned cam. Specifications Cylinder Backset • 1-1/2" only. HOLLOW METAL WOOD GRADE 1 E8281/E8291 The ANSI size MS1850SN-050 Deadlock utilizes a laminated stainless steel hookbolt, activated by a pivot mechanism to provide maximum security for wood or hollow metal doors. Case • Steel with corrosion-resistant plating, measures 1" x 6" x 2-1/4". Bolt • 5/8" x 1-3/8" with 13/16" throw. Eight-ply laminated stainless steel. Center ply has alumina-ceramic core to defeat any hacksaw attack, including rod-type “super” hacksaws, while hook shape repels pry bar attempts to “spread” the door from its jamb or lift it off its track. Faceplate Function • Measures 1-1/4" x 8". For hollow metal or wood sliding doors prepared for hardware according to the specifications of the American National Standards Institute (ANSI), this MS deadlock provides maximum security and ease of installation. Its standard 1-1/2" backset dimension provides adequate clearance for the deep jamb “pocket” of many commercial and industrial entrances. Also useful for swinging doors closing against jambs too shallow for the 1-3/8" throw of the MS1850SN swinging door deadlock. Strike • See back of page for dimensions of strike slot which can be cut in metal jamb. Trim plate, box strike, and armored strike are also available. Cylinder Cam • MS1850SN-050 Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with MS® cam dimensioned as shown. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers. See CYLINDERS section for cylinder make, thumbturn and trim ring DIMENSIONS OFinformation. CAM TO OPERATE: DEADLOCK SERIES “Dim A” .800" ± .005" 20.3mm ± .127mm .120"R 3.0mm DEADLATCH SERIES EXIT DEVICES .182" 4.6mm FLUSHBOLTS Options 18 MS MS MS MS 18 MS MS 21 22 43 45 45 49 49 83 84 86 18 18 18 47 30 30 • Cylinder backset and faceplate finish and shape (radiused, TRIM flat or bevel cross-section to match door nose) must be specified. “SCHOOLHOUSE” version, also available, is modified so that operation from inside is “unlock only”. This DIMENSIONS OF lock is handed and must be specified LH or RH. Specify Series SCH1850SN-050. Same faceplate and backset TO OPERATE SERIES DEAD options as Series MS1850SN-050. Operation from4070 inside, with standard Adams Rite 4066 Turn. THIS CAM AVAILABL FROM ABOVE CYLIND MANUFACTURERS 21.6mm ± .127mm SPECIAL ORDE • Individually boxed with machine screws for mounting. ON(OR MAKE FROM STANDARD CAM) Cylinders and/or thumbturns available separately. Shipping Standard Package .620"lbs. R weight: 1-1/2 15.7mm .850" ± .005" .334" 8.5mm 800.872.3267 • Fax 800.232.7329 10027 S. 51st Street, Ste 102 Arizona 85044 CYLINDER Phoenix, ARM-014-9/14 CYLIND TR www.adamsrite.com TRIM RING DOOR STILE Narrow sti DL-16 Deadlocks MS1850SN-050 Series MS® Deadlock (ANSI Size) All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions. Dimensions Stile & Wood Door Preparation 1/4" 2-7/32" 56.4mm 6.4mm STILE 19/32" 53/64" 15.1mm 21mm HOW BACKSET IS MEASURED: 1-1/4" 31.8mm CYLINDER C L SHOWN WITH FLAT FACEPLATE 1-15/32" 1" 25.4mm 2-9/64" 54.4mm 2-9/32" 57.9mm C L 37.3mm 1-1/4" DIA. FLAT 31/32" 11/32" 24.6mm 8.7mm 31.8mm BACKSET MEASURED AT CENTERLINE OF STILE NOSE 1-15/32" 37.3mm C L 1-1/4" DIA. 8-1/64" 31.8mm 203.6mm 8-1/64" 203.6mm TYP. BACKSET 8" C L 203.2mm 7-15/16" 22.2mm 38.1mm RADIUS 1-1/2" 38.1mm BACKSET 7/8" 1-1/2" 2-3/8" 60.3mm 201.6mm BEVEL 13/32" 10.3mm 7-1/4" 184.2mm 5/8" Armored FACEPLATE 1-1/4" x 8" 15.9mm 6" 152.4mm 1-17/64" 1-17/64" 32.1mm 32.1mm Lock & Cylinder Installation FLAT MS1850SN-450 51/64" RADIUS MS1851SN-450 20.2mm CYLINDER LOCK & STILE 11/16" LH BEVEL MS1852SN-455 RH BEVEL MS1852SN-456 17.5mm 2-3/16" STRIKE CUTOUT 55.6mm 1/4" 1/4" 6.4mm 1-15/16" 6.4mm 49.2mm 59/64" 23.4mm How to Order MS1850SN-050 MS ® Deadlock (ANSI Size) Specify quantity and the following information. Order related products separately. Product No. FACEPLATE ANSI size Handing FINISH MS185 0 SN -450 -628 0 Flat 455 LH or RHR 313 Dark Bronze Anodized 1 Radius 456 RH or LHR 335 Black Anodized 2 Bevel 450 Non-Handed* 628 Clear Anodized *Any flat or radius faceplate. Related Products When purchasing this product, please consider the following related products, available separately: Accessories Cylinders Trim Special Order Options 4015 Threshold Bolt or 4016 Header Bolt for multi-point locking. MS1850SN-050 Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with MS® cam. Deadlock lever trim & keyless entry trim. Schoolhouse function available as special order. 4085 Header Bolt for hollow metal pairs of doors. 4085 Header Bolt not recommended for wood applications. Deadlock strikes. ©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Create Date : 2015:01:06 11:12:12-07:00 Creator : Adobe InDesign CS6 (Windows) Modify Date : 2016:08:03 12:04:53-04:00 Title : XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2016:08:03 12:04:53-04:00 Creator Tool : Adobe InDesign CS6 (Windows) Format : application/pdf Document ID : uuid:7d14bd95-6ce3-4aa9-8a2e-8a782e22b60f Instance ID : uuid:742925d1-74ec-4591-b74e-c42aec3f28ff Producer : Adobe PDF Library 10.0.1 Page Count : 2EXIF Metadata provided by EXIF.tools