Locks MS1861 Series Bottom Rail Deadbolt
User Manual: Locks MS1861 Series Bottom Rail Deadbolt Mayflower Sales - Adams Rite
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
DEADLOCKS MS1861 Series Bottom Rail Deadbolt DL-17 MS1861 SERIES BOTTOM RAIL DEADBOLT Operation 360° turn of key or thumbturn throws or retracts bolt(s). Key can be removed only when bolts are in a positively locked or unlocked position. Lock accepts any standard 1-5/32" diameter mortise cylinder from either or both sides. Cylinder must have MS® dimensioned cam. Specifications CYLINDER BACKSET FULL GLASS • Minimum backset is approximately 2-1/4" for the MS186101 with vertical bolt only. The MS1861-02 with vertical and horizontal bolts requires placement of cylinder centerline 5-3/4" from nose of door. Both have cylinder center 1-7/8" above bottom edge of door. GRADE 1 E8211 The MS1861 Bottom Rail Deadbolt provides maximum security with MS deadbolt over-center/pivot locking mechanism. It utilizes hardened steel bolts for the limited space of ultra-narrow stile doors. CASE • Steel with corrosion-resistant plate, measures 1" x 6" x 1-13/16". BOLTS • 3/8" diameter. Stainless steel vertical threshold bolt has 13/16" throw. Hardened steel horizontal bolt has 1-1/8" throw. STRIKES Function Using the same over-center/pivot locking mechanism as the basic MS® deadbolt, the MS1861 lies horizontally in the bottom rail of ultra-narrow stile doors which have insufficient vertical space for a lock, and tempered glass doors which have no stile at all. The hardened steel cylindrical bolts allow simple drilled strike holes of a relatively small size to minimize the nuisance and danger presented by some threshold strikes in collecting debris or snagging on high-heeled shoes. MS1861-02 locks either single-leaf or pairs of doors. Not recommended for wood doors. • In metal installation, 7/16" drilled holes in threshold are required. For MS1861-02, drilled holes are also required in jamb or opposite door. For wood, metal plate with 7/16" hole must be provided for each bolt. CYLINDER CAM • MS1861 Bottom Rail Deadbolts are operable by any standard 1-5/32" diameter mortise cylinder with MS® cam dimensioned as shown. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers. See CYLINDERS section for cylinder make, thumbturn and trim ring DIMENSIONS OFinformation. CAM TO OPERATE: DEADLOCK SERIES “Dim A” .800" ± .005" 20.3mm ± .127mm .120"R 3.0mm DEADLATCH SERIES EXIT DEVICES .182" 4.6mm FLUSHBOLTS STANDARD PACKAGE • Individually boxed with mounting screws. Cylinders and/or thumbturns available separately. Shipping weight: MS1861-01: 1-3/4 lbs., MS1861-02: 2 lbs. MS1861-01 TRIM 183 MS MS MS MS 187 MS MS 219 229 430 451 453 490 492 830 840 865 187 187 187 478 308 309 DIMENSIONS OF C TO OPERATE: 4070 SERIES DEAD .850" ± .005" 21.6mm ± .127mm MS1861-02 .620" R 15.7mm THIS CAM AVAILABLE FROM ABOVE CYLINDE MANUFACTURERS ON SPECIAL ORDER (OR MAKE FROM STANDARD CAM) .334" 8.5mm 800.872.3267 • Fax 800.232.7329 CYLINDER CYLIND S. 51st Street, TR Ste 102 Arizona 85044 Narrow stile shoulder an www.adamsrite.com hardened s TRIM 10027 RING ARM-014-9/14 DOORPhoenix, STILE DL-18 DEADLOCKS MS1861 SERIES BOTTOM RAIL DEADBOLT All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions. Dimensions Rail Preparation #8-32 DRILL & TAP TYP. BOTTOM RAIL MTG. WEB FOR MS1861-02 5-49/64" 3/4" 146.4mm BACKSET 1" 19.1mm 25.4mm 7/16" 11.1mm DIA. THROW 1-1/8" 3-5/8" 21.6mm 92.1mm 14.3mm 5-25/64" 4" 9/16" 1/4" 14.3mm 6.4mm 1" 25.4mm 2" 1-55/64" 136.9mm 101.6mm 1-1/4" DIA. 31.8mm BOTTOM OF DOOR 9/16" 47.2mm 4" 50.8mm 1/2" 101.6mm 12.7mm 63/64" 25mm 7-1/4" 3/8" DIA. 9.5mm 184.2mm 3/8" 6-1/8" 155.6mm 1-11/16" 42.9mm 9.5mm 7-15/16" 201.6mm UNIT ILLUSTRATED IS MS1861-02. (BOTH HORIZONTAL & VERTICAL BOLTS INCLUDED.) PART NUMBER FOR VERTICAL BOLT OPERATION ONLY IS MS1861-01. CONVERSION KIT NO. 4014 AVAILABLE TO CONVERT MS1861-01 TO MS1861-02. SEE BELOW: TUBE SPACER RAIL WITHOUT WEB 4014 Conversion Kit To convert MS1861-01 to MS1861-02, 4014 Conversion Kit provides horizontal bolt assembly with guide and attachment fittings. #10-32 DRILL & TAP TYP. BOTTOM DOOR RAILS WITH WEB WILL REQUIRE MACHINING AS SHOWN. POSITION OF WEB WILL DETERMINE TUBE SPACER MIN. 2-1/2" REQUIREMENT AND TUBE SPACER LENGTH. 63.5mm CHANNEL DEPTH Lock & Cylinder Installation The 4014 Conversion Kit consists of: 1 Arm & Bolt Assembly TUBE SPACERS MAY BE REQUIRED TO POSITION LOCK MECHANISM. 2 Assembly Pin CYLINDER 3 Bolt Guide Bracket 4 Mounting Screws To assemble, press pin through disc and arm. 3 2 1 4 HOW TO ORDER MS1861 SERIES BOTTOM RAIL DEADBOLT Specify quantity and the following information. Order related products separately. PRODUCT NO. BOLT OPERATION FINISH PACKAGING MS1861 -01 -603 -IB 603 Zinc plated steel IB Individually Boxed 01 Vertical Bolt Only 02 Vertical and Horizontal Bolts If tube spacers are required, specify QUANTITY and LENGTH. RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately: Accessories Cylinders 4014 Conversion Kit for multi-point locking applications or it can be ordered with vertical and horizontal bolts (Bolt Operation option 2). MS1861 Bottom Rail Deadbolts are operable by any standard 1-5/32" diameter mortise cylinder with MS® cam. ©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2014:10:30 14:00:56-07:00 Creator : Adobe InDesign CC 2014 (Macintosh) Modify Date : 2016:08:03 12:08:43-04:00 Title : XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2016:08:03 12:08:43-04:00 Creator Tool : Adobe InDesign CC 2014 (Macintosh) Format : application/pdf Document ID : uuid:00831d13-c188-47de-b20d-48c1016a8d5c Instance ID : uuid:a33c3011-4454-4bc3-8693-3a88f04c8e80 Producer : Adobe PDF Library 11.0 Page Count : 2EXIF Metadata provided by EXIF.tools