Logic3 plc 1LFS003 Cavallino GT1 User Manual iW1

Logic3 plc Cavallino GT1 iW1

User Manual

User ManualCavallino GT1 (1LFS003)Bluetooth Audio SystemBrand Name: Logic3
English 2Safety Instructions1. Read these instructions – All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions – The safety and operating instructions should be retained for future reference.3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions – All operating and use instructions should be followed. 5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.11. Only use attachments/accessories specified by the manufacturer.12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13. Unplug the apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15. Please keep the unit in a good ventilation environment.16. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.17. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.18.- This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert AVERTISSEMENT:RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIRthe user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.- Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.- The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.19. No naked flame sources, such as lighted candles, should be placed on the apparatus.20. Attention should be drawn to environmental aspects of battery disposal.21. Use of the apparatus in moderate climates.22. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 23. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.
English 3FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Industry Canada RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio RSS-210. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps.FCC Radiation Exposure StatementCaution!IC Statement
4EnglishControlsTOP PANELBOTTOMREMOTE CONTROL PANELFRONT PANELAUX(Green) / Bluetooth(Blue)/ iPod(Red) indicatorVolume - Volume +Remote sensorDocking holderUSB charge portRemote control batteries1. Open the batter door with the with the side the arrowhead pointed. 2. Fit the battery observing polarity as shown with the same CR2025 type specified. Compositive video jackAUX jackAC socketPower / Pairing / FunctionCR2025 3V+Power FunctionPlay / PauseNextPreviousVolume +Volume -
5EnglishQuick StartPowering your player ONLine in connection1Connect a sound sources with a Line orheadphone analogue output to play through your player as below hookupdiagram shown.2 3 Set your personal audio player/computer to PLAY.iPod models that cannot be docked to unit MP3 playersCD walkman playersTape walkman playersPersonal computers or laptopsHeadphone socket•••••3.5mm jack cable (included)On the right of the bottom panelCharging your device with USB port1Charge your device using the USB TypeNoted: USB port will stop charging your device when docking the iPhone/iPad/iPod on the Docking Connector. “A” connector.USB cable (Not included)On the right of the bottom panelTo USB portTo AUX jack!To power the player ON: Plug AC cord into AC socket, and plug into a live AC wall outlet. PON mode. ress the button on the top panel or the Power button on the remote control to switch the player to Power Pbutton on the remote control to switch the player to Standby mode.ress and hold theNote: To save power, the player will enter Standby mode from ON mode automatically if there is no audio input for 15 minutes.button on the top panel for 2 to 5 seconds and then release or press the Power/Pairing/Function Power/Pairing/Function 123!Press the Power/Pairing/Function button on the top panel or press the button to select the AUX mode. Green light indicates.
Quick Start2Locate the iPhone/iPad/iPod on the Docking Connector and press it gently home. iPhone/iPad/iPod willstart to play.1Push the position with the finger pointed to Docking holder for open. 3 Download the Apps from App store.1If an iPhone/iPad/iPod (some models only) isconnected the first time, a window will be display. By pressing YES on the iPhone/iPad/iPod screen, the App store will be opened. 2Select “Install” and wait for it to download to complete the installation. Docking an iPhone/iPad/iPodPress the Power/Pairing/Function button on the top panel or press the button to select the iPod mode.Red light indicates. 6English
7EnglishQuick StartConnecting to TV with Video cable (Not included) 1Plug the video connector into thecomposite video port on the playeras below hookup diagram shown.3Please remember to push the “Line” or“input” or “Video/TV” button on your TVremote to switch the TV’s input sourceto “Composite Video” to view the videovideo with composite signal. 4Docking the iPhone/iPad/iPod onthe dock and set it to video view. 2Plug the video connector into the composite input (CVBS) port on the TV as below hookup diagram shown.Note: Never force a connector into aport. If the connector and port don’tjoin with reasonable ease, they probablydon’t match. Make sure the connector matches the port and is positioned correctly in relation to the port.Video R L!On the right of the bottom panel
8EnglishMusic ConnectivityYour Bluetooth device (cellphone, MP3 player, computer, ect.) must support the A2DP Bluetooth profile (Commonly knownas stereo audio profile) to work with the player. Many of the latest mobile phones and PCs with built-in Bluetooth functionalitywill support this profile. For accurate information about your product, please refer to your bluetooth device’s user manualfor details on the bluetooth profiles it supports and on how to set the device’s Bluetooth pairing/searching/setup mode.Using Bluetooth: Paring Your DevicePress and hold the Power/Pairing/Function button more than 5 seconds at ON mode until the blue light flashes to begin pairing1.Once your device and the player are linked you can start to play Bluetooth music through the player.1.Turn on the player and press the Power/Pairing/Functioncontrol to select the Bluetooth mode. Blue light indicates for Bluetooth mode. button on the top panel or press the button on the remote 2.Press the button on the remote control to skip the next track. immediately to skip the previous track.4.6. Press the button on the remote control again to pause play; Press again to resume it. Please remember to turn off Bluetooth device manually.Press the button on the remote control to play your Bluetooth-enable device. (Depending on the Bluetooth device youare using, you may need to manually go into media player mode on your device to make it work properly) 3.Once paired with a device, the Blue light will stop flashing and glow steadily. 4.Pairing remains intact when the player or the Bluetooth device is powered off or is taken out of link range. The player will auto 5.link with the last linked device when that device is in range.Activate Bluetooth on your device according to the device’s useoperation.found on the device’s tools or settings menu. Turn on Bluetooth connectivity and make your device “discoverable”.r manual to link to the player. Typically, Bluetooth controls are2.Before your startPairing your Bluetooth device with the playerPPairing your other Bluetooth devicelaying Bluetooth Music Search the device name “Cavallino GT1” on your bluetooth device listed and select it as your audio speaker. 3.Press the Volume +/- button on the top panel or remote control to adjust the system volume.7.Local iPod Audio ModeDock, Charge, & Play using iPod dock:1. Connect your Apple device to iPod dock.2. Press themode for iPhone/iPad/iPod charging and audio playback. Red light indicates for iPod mode.Power/Pairing/Function button on the top panel or press the button on the remote control to select the iPod Press the button on the remote control to skip back to the beginning of the track currently play. Press the button again5. Press the button on the remote control to skip the next track. immediately to skip the previous track.4.6. Press the button on the remote control again to pause play; Press again to resume it. Press the button on the remote control to play your iPhone/iPad/iPod. 3.Press the Volume +/- button on the top panel or remote control to adjust the system volume.7. Press the button on the remote control to skip back to the beginning of the track currently play. Press the button again5. Note: Connecting to a bluetooth device may take up to 5 minutes. If the pairing is unsuccessory repair your bluetooth device with the player and repeat the above steps. To restart the current connection from player for sbutton more than 5 seconds and repeat the above steps for pairing your other Bluetooth.elect the other bluetooth device, press and hold the Power/Pairing/Function Note: There are three Statuses provided for bluetooth pairing.No Pair: Blue lights 200 milliseconds of 2 seconds; Pairing: Blue lights 500 milliseconds of 1 second; Pairing: Blue light steady.
9English Trouble ShootingSpecificationThere is no power to the player Ensure that the Power Switch of wall socket is physcially set to the ON position.Power supply : AC 100-240V, 50/60HzPower consumption : 180W AUX in jack : 3.5mm (included) USB Charging Port : Full Size USB Type “A” connectorVideo output : Composite Video Ensure that the TV set has been powered on and is set to the correct AV mode.The iPhone/iPad/iPod may be damaged or dirty. Clean the iPhone/iPad/iPod or try anther one.Make sure you have the latest firmware for your iPhone/iPad/iPod.Reset your TV’s color system.Ensure that the player is connected directly to the TV (and not through a VCR, cable box, satellite receiver, etc.)Make sure your device is working properly. Check your device’s manual for details on Bluetooth pairing and linking.Make sure your device supports the A2DP and AVRCP Bluetooth profiles before linking/pairing. The player defaults to the last linked device, so a new device may need to be linked by press and hold the Power/Paring/Functionbutton for pairing other device.Ensure that the connections between the player and the TV are secure and correct.Check if the connection cables are damaged.Ensure that the AC plug is securely connected to the player and proper wall outlet.There is no power to the playerThere is no pictureThe Picture is noisy or distortedTrouble pairing device/computer with the player Remove the iPhone/iPad/iPod from the dock and check for obstruction on the connectors in the dock and on your iPhone/iPad/iPod. Then reseat it in the dock.Upgrade your software on your iPhone/iPad/iPod. For details visit http://www.apple.com or use iTunes on your computer. Check the volume setting, make sure your iPhone/iPad/iPod is working properly before dockinginto the player. Please refer to your iPhone/iPad/iPod manual for details on how to perform a reset.

Navigation menu