Logic3 plc 1LFS004 Cavallino GT1 Air User Manual Scuderia Ferrari F1 Air 2LFS002 V8 1

Logic3 plc Cavallino GT1 Air Scuderia Ferrari F1 Air 2LFS002 V8 1

UserManual.wiki >

1LFS004 User Manual

user manual

User ManualAirPlay wireless speaker systemCavallino GT1 Air (1LFS004)

English 2Safety Instructions1. Read these instructions – All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions – The safety and operating instructions should be retained for future reference.3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions – All operating and use instructions should be followed. 5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.11. Only use attachments/accessories speciﬁed by the manufacturer.12. Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13. Unplug the apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualiﬁed personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15. Please keep the unit in a good ventilation environment.16. CAUTION: These servicing instructions are for use by qualiﬁed service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualiﬁed to do so.17. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.18.- This lightning ﬂash with arrowhead symbol within an equilateral triangle is intended to alert AVERTISSEMENT:RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIRthe user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of suﬃcient magnitude to constitute a risk of electric shock.- Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualiﬁed personnel.- The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.19. No naked ﬂame sources, such as lighted candles, should be placed on the apparatus.20. Attention should be drawn to environmental aspects of battery disposal.21. Use of the apparatus in moderate climates.22. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 23.24. To assure continued compliance, any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, ﬁre or the like.

English 3FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.The manufacturer is not responsible for any radio or TV interference caused by unauthorized modiﬁcations to this equipment. Such modiﬁcations could void the user authority to operate the equipment.This device complies with Industry Canada RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio RSS-210. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps.FCC Radiation Exposure StatementCaution!IC Statement

WelcometoUsetheCavallino GT1 AirThe player oﬀers the latest experience in home audio entertainment allowing users to stream audiodigital overWi-Fi from iTunes, iPad, iPhone and iPod touch. The player enables ﬁdelity audio that is truly wireless.You can use the player to:Stream music directly from iTunes on your Mac or PC using your home Wi-Fi network.Stream your favorite music from your iPad, iPhone, or iPod touch from your iPod library.Dock, charge, and play audio with your iPhone and iPod.DStream music from your iPad, iPhone and any phones with Bluetooth feature.ownload and enjoy apps available on the App Store.Support Composite Video output with video connector.Support the audio from your sound sources (Eg. TV, CD player) input with 3.5 mm stereo cable.Provide a 5V charging connector with USB type ‘A’.English 4AirPlay works with:iTunes, iPod touch (2nd, 3rd, and 4th generation), iPhone 4GS, iPhone 4, iPhone 3GS, iPad 3, iPad 2, and iPad.For AirPlay, the player must be connected to Wi-Fi with networked access to a Mac or PC running iTunes 10.5 or later; or an iPad,iPhone, or iPodtouch running iOS 5.0 or later.CompatibilityPlace the player on a level surface away from sources of direct sunlight or excessive hear.Protect your furniture when placing your player on a natural wood and lacquered ﬁnish. A cloth or other protective material should be placedbetween it and the furniture.Clean your player with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzene thinner or similarmaterials can damage the surface of the player.Maintenance

5EnglishControlsTOP PANELBOTTONREMOTE CONTROLPANELFRONT PANELAirplay(Not light) / iPod(Red) / Bluetooth(Blue)/ AUX(Green) indicatorVolume - Volume +Remote sensoriPod dockUSB charge portRemote control batteries1. Open the batter door with the with the side the arrowhead pointed.2. Fit the battery observing polarity as shown with the same CR2025 type speciﬁed. Compositive video jackAUX jackAC jackPower / Pairing / FunctionCR20253V+Pairing indicatorPowerFunctionPlay / PauseNextPreviousVolume +Volume -

6EnglishQuick StartPowering your unit ONSDock” as your Airplay audio speaker.elect the “Ferrari Scuderia AirPlay Speaker4 5AirPlay Wireless Audio Mode1 2 3Verify that your player is successfullyconnected to your Wi-Fi network.Press buttons on the player or useyour iTunes, iPad, iPhone, or iPodtouch controls directly.Adjust volume on the player or wirelesslycontrol volume on your AirPlay sourcedevice.Launch iTunes or use your iPad, iPhone,iPad touch. Verify player and Airplaysource device is on sameWi-Fi network.!Note: for AirPlay streaming:iPad, iPhone, and iPod touch supportpoint-to-point audio streaming to oneAirPlay enabled speaker.iTunes supports point-to-multipoint audiostreaming to up to three AirPlay enabledspeakers (performance depends on yourWi-Fi network and environment).Bluetooth Audio modeBluetooth Audio mode1Acticate Bluetooth on your device. 23Search the device name “Cavallino GT1 Air” on your bluetooth device listed andselect it as your audio speaker.Press the button to play the music.4 To power the player ON:Plug AC cord into AC jack, and plug into a live AC wall outlet.PON mode. ress the button on the top panel or the Power button on the remote control to switch the player to PowerPto switch the player to Standby mode.button on the remote controlress and hold theNote: To save power, the player will enter Standby mode from ON mode automatically if there is no audio input for 15 minutes.button on the top panel for 2s or press the Power/Pairing/FunctionPower/Pairing/Function123!Press the Power/Pairing/Functionbutton on the top panel or press the button to select the Airplay mode.No light indicates.Press the Power/Pairing/Functionbutton on the top panel or press the button to select the Bluetoothmode. Blue light indicates.

7EnglishQuick StartLine in connection1Connect a sound sources with a Line orheadphone analogue output to playthrough your unit as below hookupdiagram shown.2 3 Set your personal audio player/computer to PLAY.iPod models that cannot be docked to unitMP3 playersCD walkman playersTape walkman playersPersonal computers or laptopsHeadphone socket3.5mm jack cable (included)On the right of the bottom panelCharging your device with USB port1Charge your device using the USB TypeNoted: USB port will stop charging yourdevice when docking the iPhone/iPad/iPod on the Docking Connector.“A” connector.USB cable (Not included)On the left of the bottom panelTo USB portTo AUX jack!Press the Power/Pairing/Functionbutton on the top panel or press the button to select the AUX mode.Green light indicates.

8EnglishQuick Start2Locate the iPhone/iPad/iPod on the Docking Connector and press it gentlyhome.1Remove the cover from the iPod dock. 3The player will switch to iPod modeand iPhone/iPad/iPod start to play.Red light indicates for iPod mode.Download the Apps from App store.1If an iPhone/iPod (some models only) isconnected the ﬁrst time, a window will bedisplay. By pressing YES on the iPhone/iPodscreen, the App store will be opened.2Select “Install” and wait for it to download tocomplete the installation.Docking an iPhone/iPad/iPod

9EnglishQuick StartConnecting to TV with Video cable (Not included) 1Plug the video connector into thecomposite video port on the playeras below hookup diagram shown.3Please remember to push the “Line”or“input” or “Video/TV” button on yourTVremote to switch the TV’s input sourceto “Composite Video” to view the videovideo with composite signal.4Docking the iPhone/iPad/iPod onthe dock and set it to video view.2Plug the video connector into thecomposite input (CVBS) port on theTV as below hookup diagram shown.Note: Never force a connector intoaport. If the connector and port don’tjoin with reasonable ease, they probablydon’t match. Make sure the connectormatches the port and is positionedcorrectly in relation to the port.Video R L!On the right of the bottom panel

Ifollow these steps:f you have an iPod touch, iPhone, or iPad with iOS 5.0 or later, to connect your player to a Wi-Fi network using an iOS device 1.Dand set the player to Airplay mode. ock your iOS device to the iPod dock on the top panel2.Pressplayer will connect to the same Wi-Fi network with youriOS deivce. Pairing light will stop ﬂashing for successfullyconnected. ALLOW on the iPhone/iPad/iPod screen, the4.Activate Wi-Fi connection on your device accoording to the device’s user manual to link to a available networks and enter password if prompted.3. Press and hold the Volume - button on the top panel for 10 seconds to join the Wi-Fi network. Pairing light ﬂashes and a window about Share Wi-Fi Settings will be displayed. Note: Connecting to a network may take up to 60 seconds. Ifnetwork connection is unsuccessful reset the playeror disconnectyour iOS device and reconnect and repeat the above steps.SRestart the Wi-Fi network from playeruccess!CTo restart the current network from player for sfor 10 seconds when the iOS device is docked to the iPod dock which have joined the other network. elect the other network, press and hold the Volume - button on the top panelongratulations, you have successfully connected your player to your wireless network and now you can start enjoying wireless audioanywhere in your home or oﬃce.Note:To begin using AirPlay wireless streaming, your AirPlay source devices (Mac or PC with your iTunes library as well as your iPodtouch, iPhone or iPad) must be connected to the same Wi-Fi network that the unit is connected to.English 10Wi-Fi Network Setup for AirPlayPlease verify the following steps before attempting to connect your unit to a Wi-Fi network:To enjoy AirPlay wireless audio, you must have the following:- iTunes or an iOS device (iPod touch, iPhone, or iPad).- A functioning home network with Wi-Fi.Download the latest software updates for iTunes and your iOS deviceto ensure that you are able to enjoy the latest AirPlay enhance-ments and compatibility.Download the apps for iPod touch, iPhone and iPad.Have your Wi-Fi network name (SSID) and password (if applicable) available for reference.Note: AirPlay requires iTunes 10.5 (Mac and PC) or later; OR an iPad, iPad 2, iPhone 4, iPhone 3GS, iPod touch (4th, 3rd, and 2ndgenerations) with iOS 5.0 or later.Check listConnecting to Wi-Fi network with your iPod touch, iPhone, or iPad

11EnglishMusic ConnectivityYou can connect to your player six diﬀerent ways:1. Using AirPlay to stream wirelessly from iTunes on your Mac or PC (iTunes can stream to multiple AirPlay speakers).2. Using AirPlay to stream wirelessly from your iPad, iPhone, and iPod touch (iOS devices stream to only one AirPlay speaker at a time).3. Using the iPod docking port on the top panel for audio and charging your iPhone/iPad/iPod.4. U5. Support Composite Video output with Video connector.6. Support the audio from your sound sources (Eg. TV, CD player) input with 3.5 mm stereo cable.sing the Bluetooth to stream wirelessly from your Bluetooth device such as iPad, iPhone, iPod touch.Connecting to the playerAirPlay Wireless Audio ModeEnjoy AirPlay audio anywhere:1. Press to exit Standby mode and power the player ON.Connect your iOS device to the same Wi-Fi network . Go to Settings --> Wi-Fi on your iOS device.Tap on iPod, look for the AirPlay button next to the iPod music transport controls.TAirplay Speaker Dock” speaker is not the same Wi-Fi network.ap on the AirPlay icon and choose “Ferrari Scuderia AirPlay Speaker Dock” from the list of speakers. If the “Ferrari Scuderiaavailable,restart your iOS device and verifythat the unit is powered on and connected toPress play.1.2.3.4.ConnectyourMacorPCtothesameWi-Finetworkasunit.Open iTunes on your computer.Within iTunes open“Preferences”, Select the“Devices”tab, and activate the following option:“Allow iTunes control from remote speakers”Click OK, close iTunes preferences.Look for the AirPlay icon in the bottom right corner of the iTunes window.Click the AirPlay icon and choose “Ferrari Scuderia AirPlay Speaker Dock” from the list of speakers. Click "Multiple Speakers..."to select additional AirPlay speakers. If the “Scuderia F1 Air” speaker is not available, restart iTunes and verify that the unit is poweredon and connected to the same Wi-Fi network.Press play.1.2.3.4.5.6.7.AirPlay & iPod touch, iPhone, or iPadUsing an iOS device:AirPlay & iTunesUsingaMacorPCwithiTunes:2. Press themode. Orange light indicates.Power/Pairing/Function button on the top panel or press the button on the remote control to select the AirplayPress the button on the remote control to skip the next track. immediately to skip the previous track.4.6.Press the button on the remote control again to pause play; Press again to resume it. Press the button on the remote control to play your iOS device. 3.Press the Volume +/- button on the top panel or remote control to adjust the system volume.7.Press the button on the remote control to skip back to the beginning of the track currently play. Press the button again5.

12 EnglishMusic ConnectivityYour Bluetooth device (cellphone, MP3 player, computer, ect.) must support the A2DP Bluetooth proﬁle (Commonly knownas stereo audio proﬁle) to work with the player. Many of the latest mobile phones and PCs with built-in Bluetooth functionalitywill support this proﬁle. For accurate information about your product, please refer to your bluetooth device’s user manualfor details on the bluetooth proﬁles it supports and on how to set the device’s Bluetooth pairing/searching/setup mode.Using Bluetooth: Paring Your DevicePress and hold the Power/Pairing/Function button for 10 seconds at Standby mode to begin pairing operation. Blue light ﬂashes.1.Once your device and the player are linked you can start to play Bluetooth music through the player.1.Turn on the player and press the Power/Pairing/Functioncontrol to select the Bluetooth mode. Blue light indicates for Bluetooth mode. button on the top panel or press the button on the remote2.Press the button on the remote control to skip the next track. immediately to skip the previous track.4.6.Press the button on the remote control again to pause play; Press again to resume it. Please remember to turn oﬀ Bluetooth device manually.Press the button on the remote control to play your Bluetooth-enable device. (Depending on the Bluetooth device youare using, you may need to manually go into media player mode on your device to make it work properly) 3.Once paired with a device, the Blue light will stop ﬂashing and glow steadily. 4.Pairing remains intact when the player or the Bluetooth device is powered oﬀ or is taken out of link range. The player will auto5.link with the last linked device when that device is in range.Activate Bluetooth on your device according to the device’s usefound on the device’s tools or settings menu. Turn on Bluetooth connectivity and make your device “discoverable”.r manual to link to the player. Typically, Bluetooth controls are2.Before your startPairing your Bluetooth device with the playerPPairing your other Bluetooth devicelaying Bluetooth MusicSearch the device name “ Cavallino GT1 Air” on your bluetooth device listed and select it as your audio speaker.3.Press the Volume +/- button on the top panel or remote control to adjust the system volume.7.Local iPod Audio ModeDock, Charge, & Play using iPod dock:1. Connect your Apple device to iPod dock.2. Press themode for iPhone/iPad/iPod charging and audio playback. Red light indicates for iPod mode.Power/Pairing/Function button on the top panel or press the button on the remote control to select the iPodPress the button on the remote control to skip back to the beginning of the track currently play. Press the button again5.Press the button on the remote control to skip the next track. immediately to skip the previous track.4.6.Press the button on the remote control again to pause play; Press again to resume it. Press the button on the remote control to play your iPhone/iPad/iPod. 3.Press the Volume +/- button on the top panel or remote control to adjust the system volume.7.Press the button on the remote control to skip back to the beginning of the track currently play. Press the button again5.Note: Connecting to a bluetooth device may take up to 60 seconds. If the pairing is unsuccessory repair your bluetooth device with the player and repeat the above steps. To restart the current connection from player for sbutton for 10 seconds and repeat the above steps for pairing your other Bluetooth.elect the other bluetooth device, press and hold the Power/Pairing/Function

13EnglishTroubleshootingVerify that your router is discoverable (must broadcast itself and not require user to type in the exact name). Verify that the ﬁrmware of your router is up-to-date.Must use WPA/WPA2 security (not WEP, or WPA/WPA2 enterprise).Sometimes moving the unit closer to your access point (within 10-6 ft) during network setup. *this can happen sometimes when multiple Wi-Fi networks are creating interference.Use the safari browser (Apple’s software tends to work best with it’s own technology).Make sure that the SSID name of your home router consists of normal characters or digits, with no space or special characterslike %/#/* inserted.Reset your router and start network setup over again. Player Reset: Sometimes you simply need to reset the player and start network setup over again.- Unplug the AC adaptor from wall outlet.- Repeat Wi-Fi Network Setup process if necessary.SpeciﬁcationThere is no power to the playerQuick tips for problems with network setupEnsure that the Power Switch of wall socket is physcially set to the ON position.Power supply : AC 100-240V, 50/60Hz Power consumption :180WAUX in jack : 3.5mm (included) USB Charging Port : Full Size USB Type “A” connectorVideo output : Composite Video Ensure that the TV set has been powered on and is set to the correct AV mode.The iPhone/iPod may be damaged or dirty. Clean the iPhone/iPad/iPod or try anther one.Make sure you have the latest ﬁrmware for your iPhone/iPad/iPod.Reset your TV’s color system.Ensure that the player is connected directly to the TV (and not through a VCR, cable box, satellite receiver, etc.)Make sure your device is working properly. Check your device’s manual for details on Bluetooth pairing and linking.Make sure your device supports the A2DP and AVRCP Bluetooth proﬁles before linking/pairing. The player defaults to the last linked device, so a new device may need to be linked by press and hold the Power/Paring/Play/Pause button for pairing other device.Ensure that the connections between the player and the TV are secure and correct.Check if the connection cables are damaged.Ensure that the AC plug is securely connected to the player and proper wall outlet.There is no power to the playerThere is no pictureThe Picture is noisy or distortedTrouble pairing device/computer with the playerRemove the iPhone/iPod from the dock and check for obstruction on the connectors in the dock and on your iPhone/iPod. Then reseat it in the dock.Upgrade your software on your iPhone/iPod. For details visit http://www.apple.com or use iTunes on your computer. Check the volume setting, make sure your iPhone/iPad/iPod is working properly before dockinginto the player. Please refer to your iPhone/iPod manual for details on how to perform a reset.

Navigation menu