Logitech S00069 Bluetooth Plug-play dongle for Music User Manual GBDU101 Quickstart guide

Download:
Mirror Download [FCC.gov]
Document ID	994352
Application ID	woWave5/xzS0gueB4BxmJg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	76.33kB (954150 bits)
Date Submitted	2008-09-03 00:00:00
Date Available	2008-10-17 00:00:00
Creation Date	2008-08-13 15:22:49
Document Lastmod	2008-08-15 15:59:26
Document Title	Microsoft Word - GBDU101 Quickstart guide.doc
Document Creator	Adobe Illustrator CS2
Document Author:	GC104

IMPORTANT SAFETY INSTRUCTIONS
Identifying parts
Note: Please read this information before you use the Bluetooth adapter.
1．Pinhole Button
1. Read instructions–All safety and operating instructions should be read before the
2. LED indicator
appliance is operated.
S-00069
Quickstart guide
2. Retain instructions–The safety and operating instructions should be retained in a
secure place for future reference.
3. Heed warnings–All warnings on the device and in the operating instructions should be
observed.
4. Follow instructions– All operating and use instructions should be followed.
5. Water and moisture–The device should not be used near water (bathtub, kitchen sink,
laundry tub, pool, etc.).
6. Heat – The device should be situated away from heat sources such as radiators, heat
registers, stoves, or other device (including amplifiers) which produce heat.
7. Power sources–The device should be connected to a power supply only of the type
described in the operating instructions or as marked on the adapter.
8. Cleaning–The device should be cleaned with a dry cloth.
9. Objects and liquids entry – Care should be taken so that objects do not fall and
liquids are not spilled into the device’s openings.
10.Servicing–The user should not attempt to service the device beyond that described in
the user's operating instructions. All other servicing should be referred to qualified service
professional.
11. Placement–When not in use, keep your device in a safe place where it will not be bent
or crushed.
12. Children- Keep this device away from children. Some small and detachable parts
might be swallowed by children and result in harm to them.
13. Repair or Service- Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
14. About Electromagnetic Interference (EMI)
Electronics Devices
To avoid electromagnetic interference, please turn off the device in any place where posted
notices instruct you to do so.
NOTE: Most modern electronic devices are susceptible to EMI if inadequately shielded,
designed, or otherwise configured for electromagnetic compatibility.
Aircraft
Turn off the device when on board an aircraft. The use of this device might interfere with the
telecommunication system of an aircraft.
Medical Instruments
If you use a medical device, such as a pacemaker, consult the manufacturer of your medical
device to determine if it is adequately shielded from electromagnetic interference. Your
physician might assist you in obtaining this information.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undersired
operation.
BEFORE YOU BEGIN
Before using this product, please take a moment to familiarize yourself with the new
S-00069-Bluetooth adapter.S-00069 GBDU101 is a Bluetooth Plug-play dongle for Music,
which does not require any operation from the user to initiate a connection to the remote
speaker. S-00069 can be used in stereo (A2DP) .S-00069 complies with Class2 output
power, which has a 10 meters working range.
attempting to connect to remote speaker, LED pattern shows disconnected state.
2. Power-on remote speaker.
3. Remote speaker LED indicates power-on, disconnected state with disconnected LED
pattern.
4. Remote speaker is connectable.
5. Dongle attempts to connect to remote speaker for 30 seconds.
6. Dongle fails to connect and indicates disconnected state with disconnected LED
pattern.
7. Dongle attempts to connect to secondary device.
8. Dongle connects to secondary device.
9. Dongle indicates connection state with connected LED pattern.
Placing dongle in pairing mode
1. Dongle is plugged-in and enumerated.
2. User presses recessed, pinhole button.
3. Dongle enters pairing mode and displays pairing mode LED pattern.
INDICATOR LIGHTS
S-00069 Status
Power off
Dongle is connected
Dongle is disconnected
Pairing mode
Green LED Indication
Off
On
Blinks 500 ms on and 500 ms off
Blinks 250 ms on and 250 ms off
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
TROUBLESHOOTING
A device available for pairing cannot be connected.
-Increase the separation between the equipment and receiver.
Make sure the device is within the working range, and in pairing status, then try again.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Note: A Bluetooth device can only be found in “visible” mode by other Bluetooth devices
PRODUCT SPECIFICATION
Items
Bluetooth Version
Supported Bluetooth Profile
Chipset
Working Range
Dimension
Weight
Description
Bluetooth V2.0
A2DP HSP
CSR BC03MM
Bluetooth standard class1 (100m)
60.84mm x 17.8mm x 9mm
8g
SUPPORT
If you need further help, please contact us:
GoerTek Electronics
Global Location:
Qingdao Taiwan USA Hong Kong Shenzhen
http: //www.goertek.com
e-mail: service@goertek.com
Customer Service Hotline: 86-532-88999318
The copyright and brand name are owned by the register. All information in this manual is
subject to change without prior notice.
GoerTek has the authority to explain the above information.
For more information, please visit GoerTek Website:
http://www.goertek.com
-Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
FCC & Industry Canada Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired
operation of the device.
3. USB connector
OS REQUIREMENTS
S-00069 supports the following systems:
1. Windows Vista
2. Windows XP
3. Apple Macs OS X10
S-00069 can realize its basic functions similarly in any operation system above.
GETTING STARTED
Initialization – dongle not plugged in, remote speaker powered-on, successful connection
1. Remote speaker indicates disconnected state with disconnected LED pattern,
speaker is connectable.
2. Insert dongle into USB port.
3. Dongle indicates disconnected state with disconnected LED pattern.
4. Dongle enumerates as audio device and a HID device.
5. Dongle attempts to connect to remote speaker.
6. Dongle connects to remote speaker.
7. Dongle indicates connection state with connected LED pattern.
Initialization – dongle powered-on, remote speaker powered-off, successful connection
1. Dongle is plugged-in, enumerated as an USB audio device and a HID device,
attempting to connect to remote speaker, LED pattern shows disconnected state.
2. Power-on remote speaker.
3. Remote speaker LED indicates power-on, disconnected state with disconnected LED
pattern.
4. Remote speaker is connectable.
5. Dongle attempts to connect to remote speaker.
6. Dongle connects to remote speaker.
7. Dongle indicates connection state with connected LED pattern.
Note: Users can control the music on player
Initialization – dongle not plugged in, remote speaker powered-on, successful
connection to secondary device
1. Insert dongle into USB port.
2. Dongle indicates disconnected state with disconnected LED pattern.
3. Dongle enumerates as audio device and a HID device.
4. Dongle attempts to connect to remote speaker.
5. Dongle attempts to connect for 30 seconds.
6. Dongle fails to connect to remote speaker.
7. Dongle LED indicates disconnected state with disconnected LED pattern.
8. Dongle attempts to connect to secondary device.
9. Dongle connects to secondary device.
10. Dongle indicates connection state with connected LED pattern.
Initialization – dongle powered-on,
connection to secondary device
remote
speaker
powered-off,
successful
1. Dongle is plugged-in, enumerated as an USB audio device and a HID device,

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1.1-111
Format                          : application/pdf
Title                           : Microsoft Word - GBDU101 Quickstart guide.doc
Creator                         : GC104
Creator Tool                    : Adobe Illustrator CS2
Create Date                     : 2008:08:13 15:22:49+08:00
Modify Date                     : 2008:08:15 15:59:26+08:00
Metadata Date                   : 2008:08:15 15:59:26+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 240
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 22115 bytes, use -b option to extract)
Document ID                     : uuid:3C6F4D080369DD119BBEF52314E5FFD6
Instance ID                     : uuid:069487db-5858-4ba6-89c9-19673da7fb9d
Derived From Instance ID        : uuid:3B6F4D080369DD119BBEF52314E5FFD6
Derived From Document ID        : uuid:3A6F4D080369DD119BBEF52314E5FFD6
Page Count                      : 1
Container Version               : 9
Creator Version                 : 12
For                             : User, -
Bounding Box                    : -495 -311 1106 1178
Author                          : GC104

EXIF Metadata provided by EXIF.tools