Logpro K114 10mW 915MHz FHSS wireless transceiver User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	2064773
Application ID	IL7dTr8uYdpJDgrpMP6HiQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	47.27kB (590860 bits)
Date Submitted	2013-09-06 00:00:00
Date Available	2013-09-09 00:00:00
Creation Date	2013-09-05 16:45:36
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2013-09-05 16:45:36
Document Title	Microsoft Word - Integrators Manual for 2AAN2K114.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	David Gray

Logpro
Energy and Communications Services
Intergrators Manual
Wireless Module K114
FCC ID: 2AAN2K114
Instruction for installation
Any enclosure into which this module is installed must display a Label clearly visible to the user
without magnification stating “Contains FCC ID: 2AAN2K114”
Module Specifications
The 2AAN2K114 is a 10mW, 902-928 MHz frequency hopping wireless transceiver with on board sensors.
The antenna is a meandering monopole tooled as a track on the PCB.
Physical Specifications
Parameter
Circuit board dimensions
Value
73.5mm (x) by 40.5mm(y)
Remarks
See diagram below
Radio Frequency Specifications
Parameter
Centre frequency
Modulation type
Number of channels
Minimum Frequency
Maximum Frequency
Maximum Channel dwell time
Maximum Output Power
Antenna Type
Value
915MHz
FHSS
53
903MHz
927MHz
120 milliseconds
9dBm
PCB trace
Remarks
USA ISM band
Frequency Hopping Spread Spectrum
Must be greater than 50
Cannot be below 902MHz
Cannot be above 928MHz
Cannot exceed 400mS
Cannot exceed 27dBm
Fixed
Electrical Specifications
Parameter
Minimum Input voltage
Maximum Input voltage
On board voltage regulator
Maximum current draw
Sleep current draw
Serial Communications
General Purpose Input Output
Pin Count
Analogue to Digital inputs
Value
3.0 VoltsDC
6.0 VoltsDC
Yes
35 milliAmps
5 microAmps
19200 Baud TTL
Remarks
Peaks during transmit
Fixed
Analogue Sensor Data
Parameter
ADC0
Value
Sensor characteristics R@25degC = 10K B=3997
DC drive voltage 1.2 VDC
Voltage range (defined by ADC) 0 – 1.2 VDC
Resolution 0.25 degC
Accuracy +/-0.5 degC
Range -30 to +40 degC
Remarks
Thermistor
ADC1
Sensor characteristics R@25degC = 10K B=3997
DC drive voltage 1.2 VDC
Voltage range (defined by ADC) 0 – 1.2 VDC
Resolution 0.1 degC
Accuracy +/-0.3 degC
Range -30 to +10 degC
Signal from
Thermistor
on ADC0
amplified to
expand
resolution
Analogue Sensor Data (continued)
Parameter
ADC2
Value
Sensor characteristics R@25degC = 10K B=3997
DC drive voltage 1.2 VDC
Voltage range (defined by ADC) 0 – 1.2 VDC
Resolution 0.1 degC
Accuracy +/-0.3 degC
Range 0 to +40 degC
Remarks
Signal from
Thermistor
on ADC0
amplified to
expand
resolution
ADC3
Sensor characteristics Resistive divider
DC drive voltage 0 – 6 VDC
Voltage range (after resistive 0 – 1.2 VDC
divider)
Resolution 0.02 V
Accuracy +/-0.1 V
Voltage monitor
Digital Sensor Data
Parameter
D Sensor 1
Value
Sensor characteristics
Voltage range
D Sensor 2
On/Off switch Normally open
0 – 6 VDC
OSRAM SFH3710
Sensor characteristics Optical photodiode
Spectral Range 350nm to 950nm
Remarks
Reed Switch
Reboot device
Light
Input device
D Sensor 3
SENSOLUTE MVS0608.02
Sensor characteristics Rolling Ball
Sensitivity 50mg
Vibration
Input device
D Sensor 4
ST LIS331DLH
Sensor characteristics 3 axis MEMs
Sensitivity 0.9mg
Accelerometer
Input device
D Sensor 5
SENSIRION SHT25
Sensor characteristics 0 – 100% RH
Accuracy 1.8%
Sensitivity +/- 1%
Humidity
Input device
Other Device Data
Parameter
Device 1
Value
ST M95512-RMN6TP
Size 512KB
Connection SPI
Remarks
Memory
EEPROM
Device 2
ST M95512-RMN6TP
Size 512KB
Connection SPI
Memory
EEPROM
Device 3
MicroChip
Connection I2C
Real Time Clock
Device 4
Everbouquet
SGR
Connection I2C
Device 5
HSMH-C190
Connection GPIO 2
Colour RED
LED
Device 6
HSMG-C170
Connection GPIO 3
Colour GREEN
LED
MCP7941X
MCG1603CW-
LCD Display
Environmental Specifications
Parameter
Operating Temperature Range
Operating Humidity Range
Storage Temperature range
Storage Humidity Range
IP value
Value
-35 to + 50 deg C
0 to 95% RH (non
condensing)
-35 to + 60 degC
0 to 95% RH (noncondensing)
Not Applicable
Remarks
IP value provided by
enclosure
Parts & Materials
Test Parameter
Chemicals used in
manufacture
Standard no/name
RoHS
Remarks
Only Lead-free solder used in
PCBA
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired
operation.
FCC Caution: Any changes or modifications not expressly approved by Logpro Ltd. could void the user's
authority to operate this equipment.
This transmitter module is authorized to be used in other devices only by OEM. Further transmitter testing
will not be required. However, the OEM integrator is still responsible for testing their end-product for any
additional compliance requirements required with this module installed (for example, digital device
emissions, PC peripheral requirements, etc.).
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the user manual of the end product.
Note that this product is NOT a Software Defined Radio in the sense that it is not possible in any way to
make any changes to the RF transmission characteristics via software that would cause non compliant
behavior.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm
from all persons and must not be co-located or operating in conjunction with any other antenna or
transmitter except in accordance with FCC multi-transmitter product procedures.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 5
Producer                        : GPL Ghostscript 8.15
Create Date                     : 2013:09:05 16:45:36
Modify Date                     : 2013:09:05 16:45:36
Title                           : Microsoft Word - Integrators  Manual for 2AAN2K114.doc
Creator                         : PScript5.dll Version 5.2.2
Author                          : David Gray

EXIF Metadata provided by EXIF.tools