8
5553.5- 2: 31.53 3 3.3253
26> 30> 3:3 sue-“unsou no“ 55:55...— huuaa 23 F “gonna.
32:32 go: SSS-3:02. an 32:20 fig... v-couuio 32 no»
45533 55 3 -u«>¢v oxnguoccou on 2.25 2335 35 S:
. 6.3 cu vnnu Sana “335;
2: 25 ME» 1:35. - J nu £0353“ con-«2&3 2: can:
Fu- __ «5 3 Paul-255 223.6 3 o:- E: 3.3.3 con-J...-
uua 3-5 on 2:30 c: 33:5... 3 25 use... 8:62:92: <35=~§
£555, 513? . 5; E:
5 2.3.6.0: on 52 3535.5 you 26.2 333.33 232: 22
A15 you . .
5.325: 5.33: 3231.5.- 5 yo 513 S: fiance?
“Sonia". J 3.33... 2: 52: 3 if 50.1
“52:3 “16:0 4 co yofizo 5 25 unusaflaw- 5: “25:3.
,u.>fl.u-u E: "55:32 2: 5312. 53:3: 2» - nouuzu.
4:25:- uSZ-u: 2: 2.5.33...
5:2: uixoiou 22 no 50... no 25 E Such-nuuui 2:
”3:5 3 in 3 355.62... J 35 Eu Ea u:- 39 “5.5.25- 2:
2:53 3 $5533 3 is an}; Ecru-u: cilia: uu iv:
3 5:12:55 2:52 3:5 23 22.35- .«5 fl ,:ofi.:$::
5:63»; - 5 5qu an: 43; 515-155 25 15555
9: J 32: £533: icofinflcszfio 3c: 3 5:33:55 4352
«58 fi... Juaxusbui Eu fit, 85332 5 v2; 2; 233.5
3: 1 9: 252: 35:53 in: 5:3: ca 2: 23 {57.350
“5535- .29. éofinz-u-fi 73533“ . c“ 55.1255 32:2.
251: Elna-noun canuco-afl 31,2“ 3 2:3- v 1a 32: . 2;
6.1... uu. 2: “o 2 an; 2. fizz-Ea Juriv 10.33 a :.:u - no“
.:5H 1: 5? 35.8 on 258 «5.33.2 $5 2 2.5.33 if.
quxuakbu uu2u¢ahzuk2n rev—Hanan Oun‘é
Mada-433.33
a or if, 17 till 6556 2 manner “T“ ”F
lor MDD—l 537
Spiral/ications
1) CRT
O 15 inch lube, color CRT
0 13,8 inch viewable area
0 0.28mm dot pith
0 90” deflection angle and 291mm neck diameter
0 Anti-Static coated screen surfece (LR model only)
2} Power Requirements
0 Power source: lOOVAC~240VAC SO/GOHZ
0 Power consumption: 90 watts max
0 Full VESA compliant four-stage
On Standbv Suspend off
Fm? <25wmF <25w vb <5w (power consumption)
Green Yellow Yellow Orange (power LED color)
0 DDC compatibility: DDCl/DDCZB
3) Input Signal
0 Video signal: 0‘7Vp-p analog
' Horizontal drive: lSVp-p
0 Horizontal fiequency130—70KHZ '
I Vertical drive: 3,5vp-p TTL
0 Vertical frequency: SO~90HZ
4) Resolution
0 From standard VGA up to VESA 1280'1024 pixels at GOHZ
0 Bandwidth over lO7MHZ
S) OSD Controls Function
0 Autovclisplay Hsync and \’Sync frequency ofmode
0 Auto save
0 The unit can store a total 0521 modes (ll factory modes'~ 10 users modes ‘,
6) Visual Performance
0 Video area: 265‘ 195 mm
0 Geometry distortion: 2 4 mm max
0 Misconveigenee: 04 mm max
' 0 Lineanty: 7% max
7) Mechanics
0 Weight: l2.5kg
U Dimensions; 364m'400mm‘368nun (width‘ depth' height)
8) Regulatory Approval
0 FCC/ DHHS/ UL/ CSAJ TUV/ CE
I LR model meet MFR LI requirements
Emil
93 H1 13 17ll1 flight; 2‘
~i
~I
l:
c.
IlTIi TPE
F cc Statement
This equipment generates and uses radio frequency energy and ifnot install used
properly. That is in strict accordance with the manufacturer instructions May cause
interference to radio and tzleViSion reception It has been type tested and {0qu to Comply
with the limits for a class B computing dents in accordance with the specificut'ions In
subpan I of part 15 of FCC rules, which are designed to provide reasonable protecuon
against such interference will not occur in a panicularinstaliation. If this equipment dies
cause interference to radio or televrrion reception. which can be determined by tuming the
equipment off and on, the user is encouraged to try to correct interference by one or more
of the following measures:
0 Reorient the receiving antenna.
0 Increase the separation between the equipment and the receiver.
0 Plug the equipment into a difi'erent outlet so that equipment and the
receiver are on different branch circuits.
0 Consult the dealer or an experienced radio/ television technician for
additional suggestions.
The uscr may find the booklet, how to identify and resolve radio— TV interference
problems, prepared by the Federal Communications Commission helpful. This
booklet is available from the us. government printing offices, Washington, DC»20402,
stock NO: 004-000-00345-4.
Notel: The changes or modifications not expressly approved by the party responsible
for compliance could avoid the user authority to operaterequipment
Notes 2: Shielded interface cables and an are power cord, ifany must be used in
order to comply with the emission limits.
Notes 3: This grant is issued to permit marketing only when a ferrite loaded video
cable or a split ferrite core equivalent to the type that was used during certification
testing is marketed with each unit
Meg’s/1nd Trademark Credits
The information in this dacument is subject to change without notice. The monitor,
this manual and all illustrations in it are copy righted with all rights reserved. Under
the copyright laws, they may not be copied without the written consent of our
company. '
This monitor is for IBM PC/ XT MT and compatible systems. IBM PC. IBM PC/ XT,
and IBM PC/AT are registered trademarks of international business Machines
Corporation All other brand names are trademarks of their owners.
Installation
Check the video nduptcr connector in your personal system and compare the
specifications with thosc ofthe monitor. In case ofdoubt contact your supplier. Be
sure that power for both the personal computer system and momtor is switched off,
better not even plugged in |
1. Procedure:
3, Connect the video cable to the lS-pin female connector vaidoo adapter
connector at rear of the personal computer system. Lock both screws to ensure
connection.
b. The voltage regulation ofthe monitor is indicatcd on the spec label at the bank
Compare this with power supply at location.
c, The monitor is equipped with a three-wire power cord and the third<190 Hun ( 14“)
C Gem-new Dlstomim . 14 mm maximum
0 Misconvelgencc 0 4 mm maximum
0 Norm-newly . 7% maximum
5)N0|1 Dig-ital Controls
Power Switch
Power Indicator
6) Mechanics 14 "
0 Wclght ‘ 241 Lbs
0 Dimensmns :
360 mm (w1dlh)
385 mm (depLh)
365 mm (height)
7) Regulawry Approvals
0 FCC /DHHS / UL/CSA/TUV/CE
0 LR model meeting MPR H xeqmremems
8) Factory Preset Modes
Made Bgcg utiQn fl-qu V-Freq HS 1291 VS 1152
1 640 X 3507 . 314mm 70.08Hz Desi (H may (1
2 720 x 400 31147Khz 70.081-[2 7 Liga (4 9951 (+)
3 640 X 480 7,371,47Khz . 59.95Hz 7 11:93 (4 11863 H
g} ”7,800 X 600 ” 35.16Khz 56.25Hz D051 (+1
47, i 1024 X 768 35521012 86961427 W 0081 HL Dosi (+3
fl, 640 X 480 37.86Khz 728le ncva L!) 11ch (-j
7 800 X 600 37,88Kh7. 60.32Hz post (+) posi (+)
8 800 X 600 43081011 72011412 7 we» mg) 7
9 1024 X 768 48.36Khz 60Hz 77116030) ncea (-)
Controls
Mechanical Des ription
Front View
Pave: mus“;
mgmccmml Arm
Rear View
iv 7 signicuu
AC Pawn Cunnzclnr
Digital Control Area
1. Digital Control Icons
Contrast
Brightness
Horizontal Width
Horizontal Position
Vertical Height
Vertical Position
Pincushion
. Digital Control Indication
When one ofthe seven digital controls is selected the
no
LED above that control icon is it.
s LEFT ,’ RIGHT BUTTON
Pressing the left or right button to select which control change
4. + / — BUTTON ‘
Pressmg the "+ or “-“ Button , you can change the setting for each
Othe digital control items
. “ + “ and “ ~ “ BUTTON (Recall Function)
Pressing the “ + “and “ — “ Button . return to the fatten setting
Ur
Signal Connection
A standard VlClSO cable is’provided “1th this monitor to connect With
lBM PC / XT and PC / AT , The monitor will not work properly unless a
Suitable signal is directed to each pin.
Pin Assignments
The following and right figures show the pin assignman for a DB-15 connector.
{Pin F DB—lS '
,‘ 1 Red video
‘ 2 Green video
. 3 Bluevidco
4 Notused
5 Ground
6 Red ground
7 Green ground
8 Blue ground
9 Notused
\ 10 Sync gound
. 11 Ground
I 12 DDC(SDA)
‘ 13 Horizontal Sync
‘ 14 Vertical Sync
l 15 DDC(SCL)
Cable Installation
On using a DB—ls ,Lhe momtor will operate on the VGA card only. Lock
the two Screws to ensure the better grounding.
SettingUp Your Monitor ,
1) Make sure that the power to both the system uujt and the monitor is
fumed 05.
2) Combine the four books of the pedestal base with the/four holes ofthe
monitor bottom.
3) Place the monitor on a clear and level surface
4) Connect the AC cord to the AC socket at the rear panel ofyour system
unit, ( For models wtth standard plugs, connect it to a wall outlet 1
5) Connect the video cable to the VGA card The device will
automatically switch to the right frequency ofthc interface card.
6) After you switch on both the system unit and the monitor, a display
will automatically appeal: on the monitor with in 30 seconds its
proper stgnal is applied.
7) Adjust the Brightness and the Contrast control to obtain the desued
display picture.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2001:07:16 22:33:09 Producer : Acrobat Distiller 4.0 for Windows Modify Date : 2001:07:16 22:33:10-04:00 Page Count : 12EXIF Metadata provided by EXIF.tools