Loopcomm Technology LP-8014 AC 600 Wireless PCle Card User Manual 8014 QIG

Loopcomm Technology,.Inc. AC 600 Wireless PCle Card 8014 QIG

User manual

Quick start guideManual Revision: 11/20/2015www.loopcomm.comPackaging contentsLP-8014• 1 x PCI Express® AC600 Wireless-AC network adapter• 1 x driver CD• 1 x mounting bracket• 1 x quick start guideSystem requirements• Available PCI Express slot• A computer running any of the following:• Windows® 7 (32-bit and 64-bit)• Windows 8 (32-bit and 64-bit)• Windows 8.1 (32-bit and 64-bit)• Windows 10 (64-bit)Operating system requirements are subject to change. For the latest requirements, please visit www.loopcomm.com.AC 600 Wireless PCIe Card*actual product may vary from photosProduct diagramInstall the hardwareWarning! PCI Express cards should be handled carefully, especially when they’re transported. If you’re not careful with your cards, you may lose data as a result. Always handle cards with caution. Make sure that you’re properly grounded by wearing an anti-static strap when you install any computer component. If an anti-static strap isn’t available, touch a large grounded metal surface for several seconds to discharge any built-up static electricity.1. connected to it (for example, printers, external hard drives, and so on).2. Unplug the power cable from the back of your computer.3. Disconnect any peripheral devices that are connected to your computer.4. Remove the cover from your computer case. Consult the documentation that came with your computer for details about how to do this safely.5. Locate an open PCI Express slot and remove the corresponding metal cover plate from the back of your computer case. Consult the documentation that came with your computer for details about how to do this safely. This card works in PCI Express slots of additional lanes (x4, x8, or x16 slots).6. Gently insert the card into the open PCI Express slot and fasten the bracket to the back of the case.Note:desktop system, it may be necessary to replace the preinstalled installation bracket.7. Place the cover back onto your computer case.8. Attach antennas directly to the connectors on the card.9. Reconnect the power cable to the back of your computer.10. Reconnect all of the peripheral devices that you disconnected in step 3.11. Turn on your computer.Install the softwareTo install the software on a computer running a version of Windows 7 or Windows 8, complete the following:1. Insert the provided CD into the DVD/CD-ROM drive on your computer.2. If the Found New Hardware dialog box appears on your screen, close the dialog box or click Cancel.3. Do one of the following:• On the Adapter PCI-E Card menu screen, click Driver Installation.• If the menu screen doesn’t appear, navigate to the CD/DVD drive and double-click the autorun.exe4. Follow the on-screen instructions to complete the installation.Note: You may be prompted to restart your computer when the installation is complete.Activity LEDAntenna connectorsthis product, please visit

Navigation menu