Lorex Technology LNWCX-C 1080P HD WI-FI DETERRENCE CAMERA User Manual LBV4711 Series Quick Start Guide

Lorex Technology Inc. 1080P HD WI-FI DETERRENCE CAMERA LBV4711 Series Quick Start Guide

Contents

User Manual

Download: Lorex Technology LNWCX-C 1080P HD WI-FI DETERRENCE CAMERA User Manual LBV4711 Series   Quick Start Guide
Mirror Download [FCC.gov]Lorex Technology LNWCX-C 1080P HD WI-FI DETERRENCE CAMERA User Manual LBV4711 Series   Quick Start Guide
Document ID4014221
Application IDeZy0UatNmpZOAExQu+/5Rg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize22.25kB (278172 bits)
Date Submitted2018-09-20 00:00:00
Date Available2018-09-20 00:00:00
Creation Date2018-07-03 16:42:50
Producing SoftwareAdobe PDF Library 15.0
Document Lastmod2018-09-19 11:31:07
Document TitleLBV4711 Series - Quick Start Guide
Document CreatorAdobe InDesign CC 13.0 (Windows)
Document Author: Lorex Technology Inc

Regulatory Information
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
1.
This device may not cause interference, and
2.
This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radioexempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :
1.
L’appareil ne doit pas produire de brouillage, et
2.
L’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
This equipment should be installed and operated with a minimum distance 20cm
between the radiator and your body.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre
le radiateur et votre corps.
Under Industry Canada regulations, this radio transmitter may only operate using
an antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication.
Conformément à la réglementation d’Industrie Canada, le présent émetteur radio
peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur)
approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques
de brouillage radioélectrique à l’intention des autres utilisateurs, il faut choisir le
type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente
(p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication
satisfaisante.
LNW16XF_FCC.indd 1
7/3/2018 4:42:50 PM
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference
that may cause undesired operation.
Caution: the user that changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
The statement for this device will be marked with "√"
(a) This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
(b) This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
LNW16XF_FCC.indd 2
7/3/2018 4:42:51 PM

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Title                           : LBV4711 Series - Quick Start Guide
Creator                         : Lorex Technology Inc
Subject                         : Security Camera, Night vision security camera
Create Date                     : 2018:07:03 16:42:50-04:00
Metadata Date                   : 2018:09:19 11:31:07+08:00
Modify Date                     : 2018:09:19 11:31:07+08:00
Creator Tool                    : Adobe InDesign CC 13.0 (Windows)
Instance ID                     : uuid:6ac3ece0-d599-41fd-8a5d-20e51f4fc0e7
Original Document ID            : xmp.did:8F8F9F056CFEE011BC77AAAE52913EF4
Document ID                     : xmp.id:0b4fe37a-7019-ad43-86c5-11db060c11c5
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:52cbebc1-caa7-d945-9d64-99d39d592537
Derived From Document ID        : xmp.did:a2e39a39-c15f-ce4b-93e2-cbb2a711ca1c
Derived From Original Document ID: xmp.did:8F8F9F056CFEE011BC77AAAE52913EF4
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.0 (Windows)
History Changed                 : /
History When                    : 2018:07:03 16:42:50-04:00
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 2
Author                          : Lorex Technology Inc
EXIF Metadata provided by EXIF.tools
FCC ID Filing: UCZ-LNWCX-C

Navigation menu