Lorex Technology M5410 2.4 GHz Baby Monitor BB2411 (Monitor) User Manual BB2411 Video Baby Monitor User s Guide

Lorex Technology Inc. 2.4 GHz Baby Monitor BB2411 (Monitor) BB2411 Video Baby Monitor User s Guide

Users Manual

VIDEO BABY MONITORBB2411Version 1.0USER’S GUIDE
Safety Precautions• Adult assembly is required. Keep small parts away from children when assembling.• This product is not a toy. Do not allow children to play with it.• This video monitor is not a substitute for responsible adult supervision.• Test the video monitor before use. Become familiar with its functions.• Keep the cords out of reach from children.• Never use extension cords with power adapters.• Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack.• Only insert batteries/battery pack of the same type.• Insert batteries with the correct polarity.• Do not mix new and used batteries.• Do not mix alkaline, standard, and rechargeable batteries.• Remove exhausted batteries from the product.• Keep all batteries away from children.• Dispose or recycle batteries in accordance with local laws, which may vary by location.• Do not cover the video monitor with a towel or blanket.• Do not use the video monitor near water.• Do not install the video monitor near a heat source.• Do not touch the plug contacts with sharp or metal objects.• Keep this user’s guide for future reference.To Avoid Injury to Children & Infants:• MAKE SURE to keep the camera and all power cords are least 3ft / 1m away from cribs and out of reach of your child.3ft / 1m
Product Includes ..............................2Monitor Overview ...........................2Camera Overview ...........................3Getting Started ...............................4Optional - Camera Batteries ..................... 6Optional - Wall Mounting the Camera ....... 7Using Your Baby Monitor ................8Using the Menus ..................................... 8Talking to Your Baby ................................ 9Changing Channels ................................. 9Adjusting Volume .................................. 10Adjusting Screen Brightness .................... 10Using Digital Zoom................................ 11Turning on the Night-Light ....................... 11Playing Lullabies ................................... 12Temperature Alerts ................................. 13Selecting Fahrenheit or Celsius ................ 14Enabling VOX Mode (Voice Trigger) ........ 14Video On/Off (Audio Only Mode) ..........15Pairing Additional Cameras ..........16Technical Specifications .................18Camera ............................................... 18Monitor ................................................ 18Troubleshooting ............................19Need Help? ...................................19ENGLISH1Table of Contents:
2Product Includesx1*x1CameraMonitorPower Adapterx2*x2**Contents may vary by modelx1*Screws & Anchors Power Adapterx1Monitor OverviewSound LED’sDisplayMicrophoneSpeakerPower/video on/offMenu/ZoomSelect camera/ScanStart/stop lullabyVolume upVolume downPower LEDLink LEDPower portCable Clipsx2*
ENGLISH3Camera OverviewLight sensor Night-lightLensPower LEDMicrophoneAntennaNighttime LED’sMounting stand AAA Battery CompartmentPower switchPower port Temperature sensorSpeakerPAIR buttonAntennaBelt ClipBattery compartment
Make sure all power cables are at least 3ft / 1m away from the crib and out of reach of your child.4Getting Started12Connect the power adapter to the camera.Slide the power switch to ON.Power switch3Press down on the battery compartment door and slide it off the monitor.
The battery cable only connects one way. Do not force the battery cable.Power button7Press and hold the power button to turn on the monitor.6Connect the power adapter to the monitor.ENGLISH54Connect the battery cable to the monitor.Battery cable5Replace the battery compartment door.
Pull up to extend antenna• It is recommended to charge the battery for 6 hours before use.• For overnight monitoring, it is recommended to connect the power adapter. The monitor will stay on about 6 hours when fully charged.• For better reception, extend the monitor’s antenna.TipsAAA batteries are not intended for overnight monitoring. The camera can operate for about 5 hours on battery power.Optional - Camera BatteriesUnscrew the battery compartment under the camera and insert 4x AAA batteries (not included). Replace the battery compartment door and screw.4x AAA Batteries (not included)Battery Compartment Screw• If using batteries, it is recommended to use the power adapter whenever possible to save battery life.• The camera power adapter cannot charge rechargeable AAA batteries.Notes6
Make sure all power cables are at least 3ft / 1m away from the crib and out of reach of your child. Use the included cable clips to help manage the power cable.Mounting points68mm68mmCable ClipsENGLISH7Optional - Wall Mounting the CameraTap anchors into holes with a hammer. Insert screws 2/3 of the way. Before permanently mounting the camera: • Determine where you will get the best view of your baby. • Ensure the power cable is long enough to power the camera.1Drill 2 holes in the wall with centers exactly 68mm apart.23Align the mounting points with the screws and push the camera down.
1Press to cycle through menus2Press to exit menuPress to adjust menu options8Using Your Baby MonitorThe monitor shows the following icons during use:Icon MeaningSignal strength1Selected channelScan Scan mode activatedVolume mutedX2 Digital zoom activated 2 Song currently playing Talk activatedIcon MeaningVOX VOX (Voice Trigger) onBattery fullBattery lowBattery charging68°F Current room temperatureCamera out of range or off (e.g. batteries dead)Using the Menus
Press and hold to talk to the selected camera 1Press to cycle through connected cameras or select Scan mode.The currently selected camera is shown on screen.When Scan mode is activated, the monitor changes channel automatically every few seconds. A Scan icon appears next to the currently selected channel number.1 ScanCurrently selected channel Scan mode activatedTo connect additional cameras to the monitor, see “Pairing Additional Cameras” on page 16.The monitor only plays sound from the camera that is currently being viewed.ENGLISH9Talking to Your BabyChanging Channels
Press to adjust the volume coming from the cameraPress until is shown1Press to exit menu.23Press to adjust brightness10Adjusting VolumeAdjusting Screen Brightness
1Press and hold to zoom in. An X2 icon and arrows appear on the screen.X2Press to move zoom area up/downX2Press to move zoom area left/right23Press and hold to zoom out.1Press until is shown2Press to turn the night-light on or off for the currently selected camera.OFFPress to exit menu.3ENGLISH11Using Digital ZoomTurning on the Night-Light
Playing LullabiesThe camera can play 5 different pre-loaded songs.To play songs:Press to play a song on the selected camera.12Right after pressing , press to change the song.The song number is shown on the monitor.If volume controls appear, press twice to restart the song. Volume controls will appear if you press a few seconds after pressing .3Press to stop playing the song.212
Press until Lo is shown.12Press to adjust the low temperature. If the temperature at the selected camera goes below this temperature, the monitor will beep and the temperature reading on the monitor will say “Lo”.If you select a temperature below 62°F / 17°C, the low temperature alert will be turned OFF.Lo 66° FPress until Hi is shown.3Press to adjust the high temperature. If the temperature at the selected camera goes above this temperature, the monitor will beep and the temperature reading on the monitor will say “Hi”.If you select a temperature above 86°F / 30°C, the high temperature alert will be turned OFF.4Press to exit menu.5ENGLISH13The temperature alert feature allows you to ensure the baby’s room is at a comfortable, safe temperature. The monitor beeps if the temperature gets too hot or cold.You can control the high and low temperatures that trigger alerts or disable temperature alerts. Temperature AlertsTo setup temperature alerts:
1Press until VOX is shownVOX OFFPress until is shown.1°F2Press to select F (Fahrenheit) or C (Celsius)3Press to exit menu.14In VOX mode, the monitor goes into standby. When sound is detected by the camera at the preset audio level, the monitor’s screen instantly turns on. This conserves battery power, and alerts you only when needed.Enabling VOX Mode (Voice Trigger)To activate VOX mode:Selecting Fahrenheit or CelsiusYou can select if you would like temperature readings and alerts to be in Fahrenheit or Celsius.To select temperature units:
Press to turn the screen off and monitor sound only.The monitor will play sound from the selected channel only.Video On/Off (Audio Only Mode)Press any button to turn the screen back on.2Press to adjust the audio sensitivity for VOX mode.VOX OFFVOX VOX mode is offVOX mode is onLow sensitivityMedium SensitivityHigh SensitivityIf you want softer noises to trigger the monitor (such as a faint whimper), set the sensitivity setting higher. If you only want louder noises to trigger the monitor (such as a loud cry), set the sensitivity setting lower.3Press to exit menu.While VOX is activated, the monitor’s screen and speaker will turn off after a minute unless sound is detected at the selected sensitivity level. Press any button to turn the screen back on. When VOX is on, a VOX icon is shown on the screen.1• If Scan mode is enabled, the monitor will play sound from the channel that is currently selected.• If VOX mode is activated, the speaker will turn off if sound is not detected at the selected sensitivity level for a minute. The screen will turn on when a sound is loud enough to trigger VOX. See “Enabling VOX Mode (Voice Trigger)” on page 14 for details.Notes2VOX mode will not work while Scan mode is activated.ENGLISH15
2Press and hold until is shownC1 3Press to select the channel you would like to pair the camera to.If a camera is already connected to this channel, the new camera will replace the existing camera.1Place the camera and monitor next to each other. Make sure the camera is turned on.4Press to begin pairingThe LINK LED flashes to show that pairing mode is on. 16Pairing Additional CamerasThe camera(s) included have already been paired with the monitor. If you have purchased additional add-on cameras (model# BB2411AC1), OR if your monitor and camera are not paired up, follow the steps below.To pair a camera to your monitor:
5Press the PAIR button on the back of the camera.PAIR button• Immediately move the camera away from the monitor to avoid speaker feedback.• The monitor can connect up to 4 cameras.NotesImages from the camera are immediately shown on the monitor once the camera is successfully paired.ENGLISH17
18Technical SpecificationsCameraFrequency 2.4GHzMaximum Range Up to 450ft / 138m outdoors*Up to 150ft / 46m indoors*Image Sensor 1/5” Color CMOSLens 3.6mm F2.8IR LED 6 pcsPower Adapter 6.0V DC 800mABattery Supports 4x AAA Batteries (not included)Weight 0.3lbs0.1kgMonitorFrequency 2.4GHzDisplay 2.4” TFT Color LCDPower Adapter 6.0V DC 800mABattery Li-ion Rechargeable Battery 3.7V DC 1500mAhWeight 0.3lbs0.1kg*Based on unobstructed line of sight. Actual range will vary based on surroundings.4.8in 121mm2.7in 68mm1.2in 31mm3.4in 87mm5.3in 135mm3.7in 95mm
ENGLISH19TroubleshootingProblem SolutionNo video displayed on the monitor • Press and hold the button to power on the monitor.• Monitor is out of batteries. Plug in the monitor power adapter.• Video Off or VOX mode is on. Press any button to turn the screen back on. Monitor screen keeps turning off• VOX mode is on. See “Enabling VOX Mode (Voice Trigger)” on page 14 for details on disabling VOX mode.• The monitor battery is low. Plug in the monitor power adapterThe camera is not detected; “Out of Range” is shown on the monitor• Wrong channel selected. Press repeatedly to select the channel.• Make sure the camera is powered on.• Camera may be out of batteries. Replace the batteries.• The camera and monitor may be out of range. Move the monitor and camera closer together.• You may need to pair the camera and the monitor again. See “Pairing Additional Cameras” on page 16 for details.Feedback / squealing noise coming from the monitor• Your camera and monitor may be too close to each other. Move them further apart.• Press to lower the monitor volume.Product Support is available 24/7 including product information, user guides, quick start guides, and FAQ’s at www.lorextechnology.com/supportNeed Help?
20CLEANINGClean the monitor and camera with a slightly damp cloth or an anti-static cloth. Never use cleaning agents or abrasive solvents.• Do not clean any part of the product with cleaners with thinners or other solvents and chemicals. This may cause permanent damage to the product, which is not covered by the Warranty. When necessary, clean it with a damp cloth.• Keep your camera and monitor away from hot, humid areas or strong sunlight, and do not get it wet.• Every effort has been made to ensure high standards of reliability for your baby monitor. However, if something does go wrong, please do not try to repair it yourself. Contact Customer Service for assistance.DISPOSAL OF THE DEVICEAt the end of the product life cycle, you should not dispose of this product with normal household waste, but take the product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user’s guide, and/or box indicates this.Some of the product materials can be re-used if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment.Please contact your local authorities in case you need more information on the collection points in your area. Dispose of the battery pack in an environmentally-friendly manner according to your local regulations.NOTICESWARNING: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.FCC NOTICEThis device complies with Part 15, subpart C, of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. However, it is imperative that the user follows the guidelines in this manual to avoid improper usage which may result in damage to the unit, electrical shock and fire hazard injury.CAUTION: To maintain compliance with the FCC’s RF exposure guidelines, place the camera at least 20cm (7.87in) from nearby persons.The video monitor has been tested and meets the FCC RF exposure guidelines when used with the belt clip supplied with or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.CANADA/IC NOTICEThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
USER’S GUIDEBB2411 Version 1.0Copyright © Lorex Technology Inc. 2013

Navigation menu