Lorex Technology MC1811 2.4 GHz Baby Monitor BB1811 User Manual SWEET PEEK MINI Video Baby Monitor User s Guide

Lorex Technology Inc. 2.4 GHz Baby Monitor BB1811 SWEET PEEK MINI Video Baby Monitor User s Guide

Users Manual

www.lorexbaby.comENGLISH FRANÇAIS ESPAÑOLSWEET PEEK MINIVIDEO BABY MONITORVersion 1.0USER’S GUIDE
Safety Precautions• Adult assembly is required. Keep small parts away from children when assembling.• This product is not a toy. Do not allow children or infants to play with it.• This video monitor is not a substitute for responsible adult supervision.• Test the video monitor before use. Become familiar with its functions.• Keep the cords out of reach from children and infants.• Never use extension cords with power adapters.• Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack.• Only insert batteries/battery pack of the same type.• Insert batteries with the correct polarity.• Do not mix new and used batteries.• Do not mix alkaline, standard, and rechargeable batteries.• Remove exhausted batteries from the product.• Keep all batteries away from children and infants.• Dispose or recycle batteries in accordance with local laws, which may vary by location.• Do not cover the video monitor with a towel or blanket.• Do not use the video monitor near water.• Do not install the video monitor near a heat source.• Do not touch the plug contacts with sharp or metal objects.• Keep this user’s guide for future reference.To Avoid Injury to Children & Infants:• MAKE SURE to keep the camera and all power cords are least 3ft / 1m away from cribs and out of reach of your child.• Use the included cable clips to help keep power cords away from your child.3ft / 1m
Product Includes  ..............................2Monitor Overview  ...........................2Camera Overview  ...........................3Getting Started  ...............................4Optional - Wall Mounting the Camera ....... 7Using Your Baby Monitor  ................8Using the Menu ....................................... 8Talking to Your Baby ................................ 9Adjusting Volume .................................... 9Adjusting Screen Brightness ...................... 9Turning on the Night-Light ....................... 10Changing Channels ............................... 10Enabling VOX Mode (Voice Trigger) ........ 12Video Off Mode (Audio Only Mode) .......13Pairing Additional Cameras  ..........14Disabling Channels ............................... 16Technical Specifications  .................17Camera ............................................... 17Monitor ................................................ 17Troubleshooting  ............................18Need Help?  ...................................18ENGLISH1Table of Contents:
2Product Includesx1*x1CameraMonitorPower Adapterx2*x2**Contents may vary by modelx1*Screws & Anchors Power Adapterx1Monitor OverviewCable Clipsx2*AntennaSound LEDsPower LEDPower on/offVideo on/off + VOXSpeakerESC / night lightDisplayTalkLink LEDVolume up/downMenux1Battery
ENGLISH3Camera OverviewPower portOn/off switchBelt clip standBattery compartmentPower portNight-lightLensMicrophoneAntennaNighttime LED’sMounting stand Power LEDPairing buttonLight sensorSpeaker
Make sure all power cables are at least 3ft / 1m away from the crib and out of reach of your child. Use the included cable clips to help keep power cords away from your child.4Getting Started12Connect the power adapter to the camera.Slide the power switch to ON.Power switch3Press down on the battery compartment door and slide it off the monitor.
The battery cable only connects one way. Do not force the battery cable.7Press and hold the power button to turn on the monitor.6Connect the power adapter to the monitor.Power buttonENGLISH54Connect the battery cable to the monitor.Battery cable5Replace the battery compartment door.Battery terminals
Pull up to extend antenna•It is recommended to charge the battery for 3 hours before use.•For overnight monitoring, it is recommended to connect the power adapter. When fully charged, the monitor will stay on up to 5 hours in normal mode or X+ hours on Video OFF mode  (see page 13).•For better reception, flip up the antenna on the monitor.Tips6
Make sure all power cables are at least 3ft / 1m away from the crib and out of reach of your child. Use the included cable clips to help keep power cords away from your child.Mounting points48mm48mmCable ClipsENGLISH7Optional - Wall Mounting the CameraTap anchors into holes with a hammer. Insert screws 2/3 of the way. Before permanently mounting the camera:  •Determine where you will get the best view of your baby. •Ensure the power cable is long enough to power the camera.1Drill 2 holes in the wall with centers exactly 48mm apart.23Align the mounting points with the screws and push the camera down.
1Press to open menu2Press to open sub-menus and confirm menu optionsPress up/down to select sub-menus and options3Press   to go back/exit menu.8Using Your Baby MonitorThe monitor shows the following icons during use:Icon MeaningSignal strengthSelected channelBattery full*Battery lowCamera out of range or offIcon MeaningTalk activatedSequence mode activatedNight-light activatedNight vision activatedVOX mode activatedUsing the Menu*When battery is charging, icon will fill up.
Press and hold to talk to the selected cameraPress to adjust the volume1Press to open menu.Then, press again to select Brightness sub-menu ENGLISH9Talking to Your BabyAdjusting VolumeAdjusting Screen Brightness
Press to confirm brightness2Press and hold until   appears on the screen to turn on the night-light for the currently selected cameraPress to adjust brightnessPress   to exit menu.3Press and hold until   goes away to turn off the night light10Turning on the Night-Light1Press to open the menuChanging Channels
ENGLISH112Press up/down to select Press to confirm3Press up/down to select the channel you would like to view1 2 3 4 ORSelect   to select Sequence mode. During Sequence mode the monitor will automatically switch channels every 6 secondsPress to confirm channel4To connect additional cameras to the monitor, see “Pairing Additional Cameras” on page 14.
121Press and hold until  is shownWhile VOX is activated, the monitor’s screen and speaker will turn off after a minute unless sound is detected above the preset sensitivity level. Press any button to turn the screen back on. When VOX is on, a VOX icon is shown on the screen.1Press and hold   until the   icon goes away.VOX mode will not work while Sequence mode is activated.In VOX mode, the monitor’s screen and speaker will turn off after a minute unless sound is detected at the selected sensitivity level. This conserves battery power, and alerts you only when needed.Enabling VOX Mode (Voice Trigger)To activate VOX mode:To deactivate VOX mode:
Press to turn the screen off and monitor sound only.The monitor will play sound from the selected channel only.Video Off Mode (Audio Only Mode)Press any button to turn the screen back on.1•If Sequence mode is enabled, the monitor will play sound from the channel that is currently selected.•VOX mode will override Video Off mode. See “Enabling VOX Mode (Voice Trigger)” on page 12 for details.Notes2ENGLISH13
2Press to open the menu31Place the camera and monitor next to each other. Make sure the camera and monitor are turned on.Press to select Press to open pairing sub-menu14Pairing Additional CamerasThe camera(s) included have already been paired with the monitor. If you have purchased additional add-on cameras (model# BB1811AC1), OR if your monitor and camera are not paired up, follow the steps below.To pair a camera to your monitor:
5Press the PAIR button on the back of the camera.•Immediately move the camera away from the monitor to avoid speaker feedback.•The monitor can connect up to 4 cameras.NotesImages from the camera are immediately  shown on the monitor once the camera is successfully paired.If a camera is already connected to this channel, the new camera will replace the existing camera.4Press to select the channel you would like to pair the camera to 1 2 3 4Press to begin pairing. The LINK LED will start flashingPAIR button5Press   twice to exit menu.ENGLISH15
16Disabling ChannelsYou can disable empty channels so they do not appear on the monitor when changing channels manually or using Sequence Mode. You only need to do this if you have moved a camera to a different channel using the pairing function.1Press to open the menu2Press to select   Press to open the delete channel sub-menuTo disable channels:3Press     to select the channel you would like to delete and press   to confirm. If a camera is paired to a channel, a * will appear next to the channel number.4Press   twice to exit menu.
Technical SpecificationsCameraFrequency 2.4GHzMaximum Range Up to 450ft / 138m outdoors*Up to 150ft / 46m indoors*Image Sensor 1/5” Color CMOSLens 3.0mm F2.5IR LED 6 pcsPower Adapter 6.0V DC 800mAWeight 0.3lbs / 0.1kgMonitorFrequency 2.4GHzDisplay 1.8” TFT Color LCDPower Adapter 6.0V DC 800mABattery Li-ion Rechargeable Battery 3.6V DC 750mAhBattery Life Up to 5 hours in normal modeUp to X+ hours in Video OffWeight 0.4lbs / 0.2kg*Based on unobstructed line of sight. Actual range will vary based on surroundings.4.6in 117mm2.4in 61mm2.7in 68mm3.1in 80mm5.1in 130mm2.7in 69mmENGLISH17
18TroubleshootingProblem SolutionNo video displayed on the monitor • Press and hold the   button to power on the monitor.• Monitor is out of batteries. Plug in the monitor power adapter.• Video Off or VOX mode is on. Press any button to turn the screen back on. Monitor screen keeps turning off• VOX mode is on. See “Enabling VOX Mode (Voice Trigger)” on page 12 for details on disabling VOX mode.• The monitor battery is low. Plug in the monitor power adapterThe camera is not detected; “Out of Range” is shown on the monitor• Wrong channel selected. To change the channel, see “Changing Channels” on page 10.• Make sure the camera is powered on.• The camera and monitor may be out of range. Extend the antennas on the monitor or move the monitor and camera closer together.• For optimal performance, avoid placing the monitor and camera near televisions, computers, cordless/mobile phones, or other electrical equipment. • You may need to pair the camera and the monitor again. See “Pairing Additional Cameras” on page 14 for details.Feedback / squealing noise coming from the monitor• Your camera and monitor may be too close to each other. Move them further apart.• Press   to lower the monitor volume.Product Support is available 24/7 including product information, user guides, quick start guides, and FAQ’s at www.lorexbaby.com/supportNeed Help?
ENGLISH19CLEANINGClean the monitor and camera with a slightly damp cloth or an anti-static cloth. Never use cleaning agents or abrasive solvents.• Do not clean any part of the product with cleaners with thinners or other solvents and chemicals. This may cause permanent damage to the product, which is not covered by the Warranty. When necessary, clean it with a damp cloth.• Keep your camera and monitor away from hot, humid areas or strong sunlight, and do not get it wet.• Every effort has been made to ensure high standards of reliability for your baby monitor. However, if something does go wrong, please do not try to repair it yourself. Contact Customer Service for assistance.DISPOSAL OF THE DEVICEAt the end of the product life cycle, you should not dispose of this product with normal household waste, but take the product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user’s guide, and/or box indicates this.Some of the product materials can be re-used if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment.Please contact your local authorities in case you need more information on the collection points in your area. Dispose of the battery pack in an environmentally-friendly manner according to your local regulations.NOTICESWARNING: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.FCC NOTICEThis equipment has been certified and found to comply with the limits regulated by the FCC part 15, subpart C. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment on and off), the user is encouraged to try to correct the interference by one or more of the following measures:•Reorientorrelocatethereceivingantenna•Increasetheseparationbetweentheequipmentandreceiver•Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiver is connected•ConsultthedealeroranexperiencedradioortelevisiontechnicianforassistanceCAUTION: To maintain compliance with the FCC(IC)’s RF exposure guidelines, place the camera at least 20cm (7.87in) from nearby persons.The video monitor has been tested and meets the FCC(IC) RF exposure guidelineswhen used with the belt clip supplied with or designated for this product. Use ofother accessories may not ensure compliance with FCC(IC) RF exposure guidelianes.
USER’S GUIDESWEET PEEK MINICopyright © Lorex Technology Inc. 2013 www.lorexbaby.comCANADA/IC NOTICEThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,même si le brouillage est susceptible d'en compromettre le fonctionnement.Under Industry Canada regulations, this radio transmitter may only operateusing an antenna of a type and maximum (or lesser) gain approved for thetransmitter by Industry Canada. To reduce potential radio interference to otherusers, the antenna type and its gain should be so chosen that the equivalentisotropically radiated power (e.i.r.p.) is not more than that necessary forsuccessful communication.Conformément à la réglementation d'Industrie Canada, le présent émetteurradio peut fonctionner avec une antenne d'un type et d'un gain maximal(ou inférieur) approuvé pour l'émetteur par Industrie Canada.Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs,il faut choisir le type d'antenne et son gain de sorteque la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pasl'intensité nécessaire à l'établissement d'une communication satisfaisante.

Navigation menu