Lorex Wireless Camera With Audio Quick Start Guide LW2275 Series QSG EN R1

Lorex-Outdoor-Wireless-Security-Camera-System-Quick-Start-Guide lorex-outdoor-wireless-security-camera-system-quick-start-guide

Lorex-Video-Surveillance-System-2-Camera-Security-System-Quick-Start-Guide lorex-video-surveillance-system-2-camera-security-system-quick-start-guide

Lorex-Outdoor-Wireless-Camera-Quick-Start-Guide lorex-outdoor-wireless-camera-quick-start-guide

Lorex-Wireless-Security-Camera-System-Quick-Start-Guide lorex-wireless-security-camera-system-quick-start-guide

: Lorex Lorex-Wireless-Camera-With-Audio-Quick-Start-Guide lorex-wireless-camera-with-audio-quick-start-guide lorex pdf

Open the PDF directly: View PDF .
Page Count: 2

WIRELESS DIGITAL SECURITY CAMERA

LW2275 SERIES

QUICK START GUIDE

NOTE: Avoid installing in a location which

requires the wireless signal to pass through

cement, concrete and metal structures. This will

reduce the transmission range.

A. Connect the Camera

B. Connect the Receiver to an Observation System / DVR for recording or TV for Viewing**

1. Obseration Monitor

or DVR with BNC:

Attach the included RCA/BNC

adapter to RCA cable and plug

into Observation Monitor or DVR.

Connect the Audio end of the

RCA cable to the Audio input of

the Observation Monitor or DVR.

2. TV with RCA Inputs:

Connect the RCA Video and

Audio ends of the RCA Audio/

Video cable to the Video and

Audio inputs on your TV.

1

Connect power adaptor to local

120V AC power outlet

Mount camera stand to the wall.

124Connect one end of the Camera

Power Adapter to the Camera

and the other end to an

electrical outlet.

Screw the

Antenna to the

back of the

camera.

NOTE: Wireless camera requires a power

source to operate.

NOTE: Before you install a camera, carefully plan where and how it

will be positioned, and where you will route the cable that connects the

camera to the power adaptor. Before starting permanent installation,

verify its performance by observing the image on a monitor when the

camera is positioned where it will be permanently installed.

ATTENTION: Make sure to first connect

and power on the camera before powering

on the receiver; this will ensure a proper

connection.

www.lorextechnology.com

LW2275 Series QSG_EN_R1 Page 1

Getting Started

3Screw the camera onto

the head of the stand(1).

Adjust the angle of the

camera until the desired

view is set. Tighten the

thumbscrew to secure the

camera position (2). 12

Attach the included

Antenna to the receiver

by screwing it on.

Take the double

sided tape supplied

to securely attach

the receiver to a flat

surface.

OPTIONAL

2

3View your Camera on any Observation Monitor/DVR with BNC

inputs or TV with RCA inputs.** 4Connect one end of the Receiver

Power Adapter to the Receiver and

the other end to an electrical outlet.

IMPORTANT: If the video appears

pixelated, make sure the receiver is set to

VGA resolution as QVGA will result in a

pixelated image. Press RESOLUTION button

to switch resolution.

** Requires viewing/recording

device with RCA Video or BNC Video

input. Viewing/ Recording device

sold separately.

1

2

This Wireless Digital Security

Camera System comes with the

following components:

• Digital Wireless Color Camera

with Sunshade

• Camera Stand

• Wireless Receiver

• Antenna’s for Camera and

Receiver

• Power Adaptors for Camera and

Receiver

• RCA/BNC Adapter

• Mounting Hardware

• Double Sided Tape for Receiver

• Instruction Manual

It’s all on the Web

For detailed setup information, please refer to your

User’s Manual. For additional information and

accessory purchases, please visit our website

www.lorextechnology.com/support

REGISTER NOW!

TO RECEIVE 3 MONTHS

WARRANTY EXTENSION

www.lorextechnology.com/warranty

©2011 Lorex Technology Inc.

As our product is subject to continuous improvement, Lorex Technology & subsidiaries

reserve the right to modify product design, specifications, prices & warranty without

notice and without incurring any obligation. E&OE

Multi Digital Wireless Camera Installation

When installing multiple

digital wireless security

cameras in the same

environment maintain as

much space as possible

between the receivers

to optimize camera

performance.

NOTE: It is not recommended to install more than 4 digital wireless security cameras

in the same environment to maintain optimal video frame rate performance.

Need to extend the wireless range?

See product manual for further details.

www.lorextechnology.com LW2275 Series QSG_EN_R1 Page 2

WIRELESS DIGITAL SECURITY CAMERA

LW2275 SERIES

QUICK START GUIDE

DVR