Luidia Global IPBT-500 eBeam Pen User Manual 0610 equil2 KOR ENG
Luidia Global Co.,LTD eBeam Pen 0610 equil2 KOR ENG
Users manual
6 7
4
3
2
1
5
6
8
7
9
10
11
12
13
5
10 11
6
7
8
12
13
1
2
3
4
RESET
9
Components
B. Charging cable
Digital pen
Charging cradle
Cradle cover
Receiver
C. Quick Start
A. eBeam Pen
D. User’s Guide (Warranty included)
Components Details
Receiver - Front
Power LED
Bluetooth LED
Receiver magnet clip
Receiver power button
Receiver - Bottom
Receiver reset button
Digital Pen
Pen tip
Pen function button
LED
Charging cradle (Side)
Charging socket
Pen lead ejector
Charging cradle (Bottom)
(with receiver removed)
Pen rell
Receiver – Charging cradle (Back)
Pen lid ejector
Pen lid
Tip!
1. When the Pen tip is pushed over a minute, the Pen power turns o to save the battery life.
2. The LED blinks when the Receiver battery is weak.
3. You need to charge the Pen when the LED keeps blinking.
4. Lights on the Power LED and Digital pen LED are on when charging.
When it is completely charged, the lights are o.
5. You can do pen relling by using the Pen lead ejector .
6. The replaceable cradle cover will be available in various colors from November 2013.
1)
Place the Pen tip on the left side
of the Pen lead ejector and
slide it down to the right.
2)
Pull the Pen towards you to eject the pen
lead. Place the Pen rell into the pen.
6
1
8
81
13
11
6
13
2cm
8 9
1
2
4
12
Bluetooth Connection <Pairing>
1.Turning on the Receiver
Make sure to fully charge the eBeam Pen before use
(How to charge: place both the Pen and the Receiver into the Cradle and connect the Charging socket
with the Charging cable (B)).
The Power LED automatically turns on when the Receiver is removed from the Cradle, and automatically turns
o when the Receiver is put back to the Cradle. The Bluetooth LED is slowly blinking when the Receiver turns
on. You can also use the Receiver power button to manually turn the Receiver on.
2. Bluetooth Pairing
12
1
2
4
How to Use
<bad example> <good example>
<not available to use within a 2-cm radius>
1. Place the Receiver on the top of the paper.
① Turn on the Bluetooth on your mobile device.
② Run the "ebeam note" app on your mobile device.
③ Click the pencil icon at the top of the apps screen.
④ Click the ebeam pen device (eBP-XXXX) you want to connect to.
⑤ The circular LED ickers once the device is connected.
10
2. Go to the app store to download the designated app (The app‘eBeam’is available on the app store).
At the moment the app‘ eBeam Note’ are available and there are more to come.
If you wish to use the app on Macbook / MacPro / Windows, go to www.Luidia.com to download
the relevant apps.
3. Make sure the Bluetooth LED on the Receiver is on after running the app.
4. Make sure the LED is blinking (white light) and the Pen tip makes a little ultrasonic
sound whenever you press the Pen power button . If you cannot hear the sound,
you should check the charging status of the eBeam Pen.
5. eBeam Pen is ready now. Have fun!
Caution
1. If the Pen still writes even hovering above the paper, push the Pen power button for over 5 seconds
until the Pen LED blinks fast three times.
2. Do not place any obstacles between the Receiver and the device, or the Receiver and the Pen you use.
3. This product was developed using ultrasonic and infrared rays.
Therefore, below are environments that can cause malfunctions and you should be avoid:
a. Where there is strong metallic sound (e.g. coins)
b. Directly underneath air-conditioners/heaters
c. Directly underneath strong lights or rays of the sun
d. Where humidity is high (e.g. bathroom)
4. Built-in batteries might be totally discharged upon purchase – the cradle & the pen, as a set, needs to
be charged. (completely charged within 2 hours; up to 8-hour working time)
5. The ideal temperature range for the product usage is between 10℃ and 40℃.
6. There might be malfunctions when grabbing near the Pen tip .
Warranty
Equil – 1 year warranty Equil guarantees its hardware products and accessary for their material and technical defaults for a year upon the date of the purchase. Equil does not guarantee general wear-out, any
unexpected damages or abuses. If you wish to have our warranty service, call the operators of Equi,l or visit direct retailers of Equil or authorized service provider of Equil. A range of possible service options vary
depending on which country you request from. There might be phone charge or international shipping costs. Refer to www.myequil.com for the entire terms and conditions of the service. A copy of this Warranty can
be provided by email. Warranty benets are applied along with rights provided by local Consumer Laws.
2
8 6
7
<bad example> <good example>
6
FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-
nected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution
Modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired
operation