Lumi United Technology MFKZQ01LM Cube User Manual

Lumi United Technology Co., Ltd Cube Users Manual

Users Manual

Cube Quick Start GuideProduct IntroductionAqara Cube is a smart wireless controller that recognizes multiple actions. Configure theCube via app, and you can use it to control various smart accessories through linkagecontrol.*A Hub is required.*Aqara Hub is required to enable Aqara Cube to work with HomeKit technology. Seewww.aqara.com for more details.*This product is for indoor use only.Long Press for 5s: ReconnectSingle Press: Effective Range TestQuick Setup1. Please add the Hub to the app according to the Hub Quick Start Guide.2. Please open the bottom cover with the metal strip and remove the battery insulation tab.3. Please open the app, tap “Home” and then tap “+” in the top right corner to enter “AddDevice (Accessory)” page. Select “Cube”, and add it according to instructions.MFKZQ01LM
2/5*If the connection failed, please move the accessory closer to the Hub and try again.Effective Range Test: Single swing the Cube or single press the reset button in the Cube. Ifthe Hub makes voice prompts, it indicates that the Cube can communicate effectively withthe Hub.*Avoid metal surface to maximize signal strength.Identify an Accessory: Open the app, go to“Device List (Accessories)”page. Single swing theCube or single press the reset button in the Cube. If the Hub makes voice prompts and theCube icon in the app blinks, it indicates that the Cube is identified.*Only Aqara Home app and Aqara app support this function.SpecificationsModel: MFKZQ01LMDimensions: 45 × 45 × 45 mm (1.77 × 1.77 × 1.77 in.)Wireless Protocol: ZigbeeBattery: CR2450Operating Temperature: -10° – +50° COperating Humidity: 0 – 95% RH, no condensationOnline Customer Service: www.aqara.com/supportEmail: support@aqara.comManufacturer: Lumi United Technology Co., Ltd.Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, TaoyuanResidential District, Nanshan District, Shenzhen, China.
3/5FCC ID:2AKIT-MFKZQ01LMFederal Communications Commission (FCC) compliance statement1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may cause undesired operation.2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.-Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure StatementThe device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
4/5IC:22635-MFKZQ01LMIC NOTICE TO CANADIAN USERSThis device complies with Industry Canada license‐exempt RSS standard(s). Operation issubject to the following two conditions: (1) This device may not cause interference, and (2)This device must accept any interference, including interference that may cause undesiredoperation of the device. This device complies with RSS‐247 of Industry Canada. Operationis subject to the condition that this device does not cause harmful interference. This Class Bdigital apparatus complies with Canadian ICES‐003 (Cet appareil numérique de la ClasseB conforme à la norme NMB‐003 du Canada).The SAR limit of CANADA (IC) is 1.6 W/kg averaged over one gram of tissue. Device has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification when properly worn on body is 0.084W/kg.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareilsradio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1)l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter toutbrouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre lefonctionnement.La limite SAR du Canada (IC) est de 1,6 W / kg en moyenne par gramme de tissu. types  aégalement été testé contre ces valeurs. La valeur SAR la plus élevée déclarée en vertu de cette norme lors de la certification du produit lorsqu'il est correctement porté sur la tête est 0.084 / kg.Hereby, LUMI UNITED TECHNOLOGY CO., LTD declares that the Radio Equipment type isin compliance with RED 2014/53/EU. The full text of the EU Declaration of Conformity isavailable at the following internet address: www.lumiunited.com/DoC.This product can be used across EU member states.Complies with the European Union’s“Restriction of Hazardous Substances Directive, ” whichprotects the environment by restricting specific hazardous materials and products.
5/5Symbol on the product or on its packaging indicates that this product may not be treated ashousehold waste. Instead it shall be handed over to the applicable collection point for therecycling of electrical and electronic equipment.CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.RECYCLING. This product bears the selective sorting symbol for Waste electrical andelectronic equipment (WEEE). This means that this product must be handled pursuant toEuropean directive 2012/19/EU in order to be recycled or dismantled to minimize its impacton the environment.Symbol for “ENVIRONMENT PROTECTION – Waste electrical products should not bedisposed of with household waste. Please recycle where facilities exist. Check with yourlocal Authority or retailer for recycling advice.”

Navigation menu