Lumi United Technology WSDCGQ11LM Temperature and Humidity Sensor User Manual Manual

Lumi United Technology Co., Ltd Temperature and Humidity Sensor Manual

Manual

1The Temperature and Humidity Sensor User’s ManualIntroduceThe Temperature and Humidity Sensor (H&T Sensor) is a smart device usinglow-consumption, low cost ZigBee wireless protocol. It is powered by a CR2032 battery,and complies ZigBee’s HA1.2 (Home Automation) standard. The H&T Sensor caninteroperate with the Aqara multi-functional gateway and other smart device. It canbe used to measure and wirelessly report temperature, humidity and pressureinformation. And users can check the ambient changes in real time on their smartphone.1. This device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference thatmay cause undesired operation.2. Changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmful interference in a residentialinstallation.This equipment generates uses and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmfulinterference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of thefollowing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. This equipment should be installed and operated withminimum distance 20cm between the radiator & your body
2ParameterProduct Model:WSDCGQ11LMProduct Size:36x36x9mmBattery Type:CR2032Detect Range:- 20℃－+ 60℃，±0.3℃；0－100%RH，±3%，No Condensation；30KPa－110KPa,±120Pa;Execution standard:Q/QLML006－2016Installation Method:Effective distance validation: Click the reset button on the OS sensor in selectedsensor installation location, it will be effective communication between device andgateway if the gateway to prompt.Tear off glue stick protective film (with round back glue to stick in the attachment), stick on the wall.*The surface of the paste must be kept clean and dry

Navigation menu