Lumi United Technology WXKG11LM Wireless Switch User Manual The Wireless Switch User s Manual

Lumi United Technology Co., Ltd Wireless Switch The Wireless Switch User s Manual

Users Manual

1The Wireless Switch User’s ManualIntroduceThe Wireless Switch (WS) is a smart device featuring low power consumption,small size, and cost-efficiency, utilizing the ZigBee©wireless protocol. It ispowered by a CR2032 battery, and complies with ZigBee’s HA1.2 (Home Automation)standard. The WS communicates with the Aqara multi-functional gateway.1. This device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference thatmay cause undesired operation.2. Changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmful interference in a residentialinstallation.This equipment generates uses and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmfulinterference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of thefollowing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. This equipment should be installed and operated withminimum distance 20cm between the radiator & your bodyParameterProduct Model:WXKG11LMProduct Size:45x45x12mmBattery Type:CR2032Operation Temperature:- 10℃－+ 60℃
2Operation Humidity:0－95%RH，No CondensationExecution standard:Q/QLML004－2015Installation Method:Effective distance validation: Click the reset button on the OS sensor in selectedsensor installation location, it will be effective communication between device andgateway if the gateway to prompt.Tear off glue stick protective film (with round back glue to stick in the attachment), stick on the wall.*The surface of the paste must be kept clean and dry.

Navigation menu