Lutron Electronics 0022 HR-REP SIGNAL REPEATER User Manual RF Signal Repeater

Lutron Electronics Company Inc HR-REP SIGNAL REPEATER RF Signal Repeater

USERS MANUAL FOR HR REP REPEATERS

Codes: Install in accordance with all local and nationalelectrical codes.Environment: Ambient operating temperature: 0-40°C, 32-104°F, 0-90% humidity, non-condensing.Indoor use only.Cleaning: Clean with a soft damp cloth only. Do not useany chemical or abrasive cleaners.RF Device Placement: RF Signal Repeaters must belocated within 60 feet (18m) of an RF Processor oranother RF Signal Repeater. Power: Use only the DC adapter provided by Lutron withyour unit (Lutron model # T120-9DC-3-WH).Caution - Using a DC adapter not rated at thefollowing specifications could damage the con-trol and possibly overheat the DC adapter.• Input: AC 120/127V 50/60Hz• Output: DC 9V/300mA Class 2Please Read Before InstallingInstallation InstructionsOverviewThe HomeWorks RF Signal Repeater provides additionalcoverage area for Radio Frequency (RF) signals sentbetween HomeWorks RF Dimmers/Switches, and RFKeypads. Each RF Signal Repeater covers approximately2500 square feet (232m2) of living space.RF Signal RepeaterHR-REP-SW120/127VAC, 50/60Hz (DC Adapter)AUXILIARY ACTIVATE TESTHR-REP-SW
2DC Adapter Installation1. Find a suitable location for the RF SignalRepeater. Place the Repeater in a convenient andaccessible location. Note: RF Signal Repeatersshould be located within 60 feet (18m) of anotherRF Signal Repeater or an RF Processor.2. Apply power to the RF Signal Repeater.Optional Wall MountingRF Signal Repeaters may be wall mounted using thesupplied wall bracket.Verify AuxiliaryLED is lit whenpowered Plug in powercord and DCadapterAttach wall bracket to wall using thesupplied screws and wall anchors.Wrap excess DC Adapter cordaround the cord holder. AlignRepeater and snap onto wallbracket.UP UPAUXILIARY ACTIVATE TESTFunction LEDsTest ButtonTests whether RFcomponents can“hear” RF SignalRepeater, and if RFSignal Repeater can“hear” RF compo-nents.Activate ButtonUsed when addingRF Signal Repeaterto the system.Auxiliary ButtonLED indicates RFSignal Repeater ispowered (button isnot used).Operation
System Communications3##P/N 292-153P/N 292153Notes• RF Dimmers and Keypads must be locat-ed within 30 feet (9m) of an RF SignalRepeater or an RF Processor. Multiplerepeaters may be necessary to provideadequate coverage.• RF Dimmers cannot be controlled by thesystem and RF Keypads do not functionuntil they are addressed and programmed.See the HomeWorks Utility online help.RF TabletopKeypadRF Dimmer30 Feet (9m) maximumRF ProcessorRF KeypadHome A: 2500 sq. ft. (232m2) or less - all RF devices within 30' (9m) of RF Processor##P/N 292-153P/N 292153RF TabletopKeypadRF Dimmer30 Feet (9m) maximumRF ProcessorRF KeypadHome B: 2500 sq. ft. (232m2) or greater - some RF devices more than 30' (9m) from RF ProcessorRF Signal Repeater30 Feet (9m) maximum60 Feet (18m)maximumbetween RFProcessors andRepeaters, orbetweenRepeaters
LIMITED WARRANTYLutron will, at its option, repair or replace any unit that is defective in materials or manufac-ture within two years after purchase. After the two year period, a pro-rated warranty appliesto this product until eight years after the purchase. For warranty service, return unit to placeof purchase or mail to Lutron at 7200 Suter Rd., Coopersburg, PA 18036-1299, postage pre-paid. Telephone the Lutron Technical Support Center toll free at 800-523-9466. For moreinformation regarding this warranty contact your Lutron representative.THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES, AND THEIMPLIED WARRANTY OF MERCHANTABILITY IS LIMITED TO TWO YEARS FROM PUR-CHASE. THIS WARRANTY DOES NOT COVER THE COST OF INSTALLATION,REMOVAL OR REINSTALLATION, OR DAMAGE RESULTING FROM MISUSE, ABUSE,OR IMPROPER OR INCORRECT REPAIR, OR DAMAGE FROM IMPROPER WIRING ORINSTALLATION. THIS WARRANTY DOES NOT COVER INCIDENTAL OR CONSEQUEN-TIAL DAMAGES. LUTRON’S LIABILITY ON ANY CLAIM FOR DAMAGES ARISING OUTOF OR IN CONNECTION WITH THE MANUFACTURE, SALE, INSTALLATION, DELIVERY,OR USE OF THE UNIT SHALL NEVER EXCEED THE PURCHASE PRICE OF THE UNIT.This warranty gives you specific legal rights, and you may also have other rights which varyfrom state to state. Some states do not allow limitations on how long an implied warranty lasts,so the above limitation may not apply to you. Some states do not allow the exclusion or limi-tation of incidental or consequential damages, so the above limitation or exclusion may notapply to you.This product may be covered by one or more of the following U.S. patents:4,835,343; 5,736,965; 5,838,226; 5,848,054; 5,905,442; 5,982,103; DES 389,805; DES404,013 and corresponding foreign patents. U.S. and foreign patents pending. Lutron andHomeWorks are registered trademarks of Lutron Electronics Co., Inc.© 2002 Lutron Electronics Co., Inc.Technical and Sales AssistanceIf you need assistance, call the toll-free LutronTechnical Support Center. Please provide exactmodel number when calling.(800) 523-9466 (U.S.A., Canada and the Caribbean)Other countries call:Tel: (610) 282-3800Fax: (610) 282-3090Visit our Web site at www.lutron.comLutron Electronics Co., Inc.7200 Suter RoadCoopersburg, PA 18036-1299Made and printed in the U.S.A. 11/02 P/N 043-110 Rev. AHomeWorks®Interactive RF Signal Repeater TroubleshootingSymptom Cause and ActionNo power available to unit.• Faulty power supply. Replace power supply.Repeater not programmed. • Refer to the HomeWorks Utility online help for program-ming instructions.Repeater appears not to be working.FCC InformationNote: This equipment has been tested and found to comply with the limits for a Class B digi-tal device, pursuant to Part 15 of the FCC rules. These limits are designed to provide rea-sonable protection against harmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and, if not installed in accordancewith the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equip-ment does cause harmful interference to radio or television reception, which can be deter-mined by turning the equipment off and on, the user is encouraged to try to correct the inter-ference by one or more of the following measures: • Reorient or relocate the receiving antenna.• Increase the seperation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Caution: Changes or modifications not expressly approved by Lutron Electronics Co. couldvoid the user’s authority to operate this equipment.Industry Canada InformationThe term “IC:” before the radio certification number only signifies that Industry Canada tech-nical specifications were met.Orange Auxiliary LED is flashing. Repeater is out of system communication range.• Move repeater to within 60 feet (18m) of the RFProcessor or another repeater.

Navigation menu