Luxul Wireless XAP1210 High Power Wireless 300N Low Profile Access Point User Manual LUX QIG XAP 1210 indd

Simply

Connected

Quick Install Guide

XAP-1210

High Power Wireless

300N

Low

Profile Access Point

Use

the

XAP-1210

to:

•

Deliver

Broader

WI-Fl

Coverage

and

Eliminate

Client

Device

Roaming

Issues

with

Fewer

APs

•

Improve

Data

Rates

with

Multi-Stream

Wireless

802.lln

Technology

• Optimize

VoIP,

Streaming

Media

and

Other

Demanding

Applications

• Create a Secure Guest Network

•

Simplify

Wi-Fi

Installation

while

Minimizing

Setup

Time

and

Costs

XAP-1210

Quick Install Guide

Model

Number:

XAP-1210

Quick

lnsta/

I

Guide

High Power Wireless 300N Low Profile Access Point

FCC

ID:

W59XAP1210

IC:

8584A-XAP1210

©

2014

Luxul.

All

Rights Reserved.

No

part

of

this

publication

may be

modified

or

adapted in any

way,

for

any

purposes

without

permission in writing

from

Luxul. The material in this manual

is

subject

to

change

without

notice. Luxul reserves

the

right

to

make changes

to

any

product

to

improve reliability, function,

or

design.

No

license

is

granted, either

expressly

or

by implication

or

otherwise under any Luxul intellectual property rights.

An implied license

only

exists

for

equipment, circuits and subsystems contained in

this

or

any Luxul product.

DOCUMENT

CONVENTIONS

These graphical alerts are used in this

document

to

indicate notable situations:

NOTE: Tips, hints,

or

special requirements

that

you

should take

note

of.

CAUTION: Care

is

required. Disregarding a caution can result in data

loss

or

equipment

malfunction.

WARNING!: Indicates a

condition

or

procedure

that

could result in

personal injury

or

equipment

damage.

FCC

COMPLIANCE

This device complies

with

Part

15

of

the

FCC

Rules.

Operation

is

subject

to

the

following

two

conditions:

(1)

this device may

not

cause harmful interference, and

(2)

this device must accept any interference received, including interference

that

may cause undesired operation.

CONTACT LUXUL

Sales

P:

801-822-5450

E:

sales@luxul.com

Technical

Support

P:

801-822-5450

E:

support@luxul.com

14203

Minuteman

Drive,

Suite

201,

Draper,

UT

84020-1685

I

luxuLcom

I

801-822-5450

LUX-QIG-XAP-1210

0630140308

LU

lif'

UL

PACKAGE

CONTENTS

The

following

Items

should

be

Included

In

the

box:

...

One:

XAP-1210

Wireless

AP

...

One:

Mounting

Bracket

and

Hardware

...

One:

PoE

Injector

and

Power

Cord

...

Two:

Ethernet

Cables

...

One:

Quick Install

Guide

Simply Connected

NOTE:

If

any

of

the

listed

items

are

missing

or

damaged,

please

contact

the reseller

from

whom

you

purchased

for ret'um/replacement.

HARDWARE

DESCRIPTION

XAP-1210

LED

XAP-1210

front

LED

XAP-1210

LED

Indicators

Nll'M

Status Function

----

Power

On

The

XAP-1210

is

powered

and

woricing

properly.

Off

Blinking

XAP-1210

Rear

Ports

The

XAP-1210

Is

not

receiving

power

or the

LED

has

been

turned off

in

the

APs

software interface.

The

XAP-1210

is

booting

up.

XAP-1210

Rear

Ethernet

port

XAP-1210

Rear

Power

port

ID

2014

Umil

AU

Jl4htl

RmonC

Otl>cr~nl

~~'""th:P"'P"1Yoftldlcpa:llle°""'""

XAP-1210

Quick

lnsta/

I

Guide

PoE

Injector

LED

Indicators

Name Status Function

___

.

..._

__

_

PWR

On

Power

is

connected

to

the injector

Off

Injector

is

not

receiving

power

PREPARING

FOR

INSTALLATION

System

and

Power

Requirements

~

Computer

with

supported Web browser. Minimum supported web browser ver-

sions include:

I.E.

9.0,

Firefox

2.5,

Safari

5.0,

Chrome

3.0

and up. The Web browser

is

used

to

configure

the

XAP-1210.

~

The

POE

injector

power

supply requires

AClOOV

-

240V,

50Hz -60Hz.

XAP-1210

INSTALLATION

Access

Point

Placement

The

XAP-1210

high powered

access

point

is

designed

for

optimal

performance

as

well

as

for

simple and

efficient

installation and setup.

It

designed

for

mounting

on

the

ceiling, wall

or

placed

on

a desktop

or

other

flat

surface. Because

the

signal

generated by

the

XAP-1210

is

omnidirectional,

the

unit

should be mounted

on

a

ceiling

or

wall

directly

in

the

center

of

the

desired coverage area .

•

XAP-1210

Coverage

Pattern

Ceiling

and

Wall Mounting

The

XAP-1210

comes

with

a square mounting bracket

to

mount

it

to

the

wall

or

ceiling.

Use

the

Mounting Pattern

(Page

6-7)

for

mounting bracket alignment.

14203

Minuteman

Drive,

Suite

201,

Draper,

UT

84020-1685

I

luxuLcom

I

801-822-5450

LUX-QIG-XAP-1210

0630140308

LU

~

UL

Simply

Connected

XAP-1210 mounted on a ceiling XAP-1210 mounted on a

wall

Desktop Installation

Place on any

flat

surface

XAP-1210 on a desktop

or

flat

surface

Connecting

the

Ethernet Cable

With

the

XAP-1210

properly mounted,

you

can

now

plug

the

Ethernet Cable

into

the

RJ-45

connector.

NOTE: Category-5, super Category-5

or

Category-6 unshielded

twisted

pair {CAT5/CAT5e/CAT6

UTP)

cables can be used. For best

results,

it

is

recommended

that

Category-6 shielded

twisted

pair

be used

to

ensure stable data transmission

at

highest data

rates.

Connecting

to

the

Power Source

The

XAP-1210

is

PoE

ready and supports 802.3at

PoE.

A

PoE

injector

is

included

with

the

device. To apply power, simply

connect

the

opposite

end

of

the

Ethernet

cable

to

which

the

access

point

is

already connected

to

the

provided

PoE

injector

or

other

PoE

switch

or

injector. An Ethernet cable length

of

up

to

300

feet

can be

used.

DO

NOT

yet

apply

power

to

the

PoE

injector

or

switch.

©

2014

Luxul

All

Rights

Reserved.

Other

trademarks

and

registered

trademarks

are

the property

of

their

respective

owners

MOUNTING

PATTERN

@~I

__

@.___I

--

J @

XAP-1210

Quick lnsta/ I Guide

PoE

Injector

Setup

~

Data In: Connect

an

Ethernet cable

from

your

router

or

switch

to

the

Data In

port

of

the

included

PoE

Injector

~

Data &

PWR

Out:

Connect

an

Ethernet cable

from

the

Data &

PWR

Out

port

of

the

included

PoE

Injector

to

the

PoE

Port

of

the

XAP-1210

~

AC Power: Connect

the

included

AC

Cord

to

the

Power

Input

of

the

Included

Injector first and

then

to

the

AC

outlet.

NOTE: The

XAP-1210

is

not

a router and

will

need

to

be connected

to

a

network

with

a

router

in order

to

deliver Internet

access.

From

your

Router

or

Switch

XAP-1210

POE

Injector Power

Source

The

PoE

Injector combines power and data to the

XAP-1210

CAUTION:

Because

the

XAP-1210

is

a High-Powered access

point

it

is

normal

for

it

to

be warm

to

the

touch

NOTE: The

XAP-1210

is

designed

to

work

with

any 802.3at

power

source.

NOTE: The

XAP-1210

can also be powered by

direct

AC

power. Contact

Luxul

to

purchase

an

AC

Power Adapter.

14203

Minuteman

Drive,

Suite

201,

Draper,

UT

84020-1685

I

luxuLcom

I

801-822-5450

LUX-QIG-XAP-1210

0630140308

LU

lf

UL

CONFIGURATION

Default

IP

Address

Simply

Connected

The

XAP-1210

is

not

equipped

with

an

internal

DHCP

server.

If

connected

to

a Luxul

Router, configuration

will

be automatic. Otherwise,

the

IP

address

of

the

computer

for

login and configuration

will

need

to

be manually configured. The

table

below

lists

the

default

parameters

of

the

XAP-1210.

Parameter: Default Value

Default

IP

address:

192.168.0.10

Default

user

name:

admin

Default

password:

admin

The Luxul

XAP-1210

default

IP

addresss

is

192.168.0.10.

If

the

IP

address

of

your

router

is

not

set

to

the

192.168.0.X

network, a

temporary

static

IP

address

must

be set

on

the

computer

being used

for

configuration. To

do

so, set

the

IP

address

of

the

com-

puter

to

the

192.168.0.X

range and

then

use

the

default

IP

address

of

your

XAP-1210

as

the

Gateway/Router.

Once

configured, set

the

computer

IP

configuration back

to

"Obtain

Automatically/DHCP:'

NOTE:

Go

to

http:/

/luxul.com/how-to-videos

for

videos

about

changing

the

IP

address

of

your

Operating System.

Connect a Client Device

~

Connecting a Wireless

Client

Device: Connect

the

client

device

to

the

XAP-1210

default

wireless

network

Luxul1210. Wireless

network

will

run in

Open

Security

mode. A passphrase

is

not

required

until

Wireless Security

is

configured.

~

Connecting an

Ethernet

Device:

Use

Ethernet cable

to

connect

your

computer

or

device

to

one

of

the

XAP-1210

LAN ports.

Login

to

the

XAP-1210

with

the

following

steps:

1.

Open

a

Web

browser, and

enter

192.168.0.10.

The access

point

login screen

will

appear.

2.

Enter

the

user name and password (default user name and

default

password

are

both

set

as

"admin"), and

then

click

"OK"

to

login

to

the

access

point

configuration interface.

©

2014

Luxul.

All

Rights

Reserved.

Other

trademarks

and

registered

trademarks

are

the

property

of

their

respective

owners

XAP-1210

Quick

lnsta/

I

Guide

ADVANCED

SETTINGS

For

advanced settings information go

to

luxul.com

WARNINGS AND

SAFETY

INFORMATION

~

Verify

that

the

electrical circuits have appropriate grounding and overload

protection.

~

Attach

only

approved

power

cords

to

the

device.

~

Verify there

is

adequate ventilation around

the

device, and

that

ambient temperatures

meet

equipment

operation specifications.

~

The

XAP-1210

is

designed

for

indoor

use only.

DO

NOT

place this outdoors.

~

DO

NOT

install in

or

near

hot

or

humid places, such

as

a kitchen

or

bathroom.

Take

care

to

minimize exposure

to

excessive heat

or

moisture.

~

Small parts and plastic

bags

used

for

packaging may be harmful

to

small children.

KEEP

All

ACCESSORIES

OUT

OF

THE

REACH

OF CHILDREN!

~

The

XAP-1210

may become

hot

when in

use

for

extended

time

periods. This

is

normal and

is

not

a

malfunction.

DO

NOT

install where

it

will

be exposed

to

paper,

cloth

or

other

flammable materials.

REGULATORY

COMPLIANCE

The device complies

with

internationally recognized standards covering human exposure

to

elec-

tromagnetic fields

from

radio devices. This

equipment

also complies

with

FCC

radiation exposure

set

forth

for

an

uncontrolled

environment. In

order

to

avoid

the

possibility

of

exceeding

the

FCC

radio frequency exposure limits, human

proximity

to

the

antenna shall

not

be

less

than

20

cm

(8

inches) during normal operation.

Unauthorized antennas, modifications,

or

attachments could cause damage and may violate regula-

tory

approvals. Any changes

or

modifications

not

expressly approved

by

the

party

responsible

for

compliance could

void

the

authority

to

operate

the

equipment.

The

equipment

version marketed in

the

U.S.

is

restricted

to

usage

of

channels

1-11

only.

Health

and

Safety Recommendations

Warnings

for the use

of

Wireless Devices:

Please

observe all warning notices

with

regard

to

the

usage

of

wireless devices

Potentially

Hazardous

Atmospheres: You are reminded

of

the

need

to

observe restrictions

on

the

use

of

radio devices in

fuel

depots, chemical plants etc. and

areas

where

the

air contains chemicals

or

particles (such

as

grain, dust,

or

metal powders).

Safety

in

Hospitals:

Wireless devices transmit radio frequency energy and may

affect

medical

electrical equipment.

When

installed adjacent

to

other

equipment,

it

is

advised

to

verify

that

the

adjacent

equipment

is

not

adversely affected.

RF

Exposure

Guidelines

Safety Information: The device complies

with

internationally

recognized standards covering

human exposure

to

electromagnetic fields

from

radio devices.

14203

Minuteman

Drive,

Suite

201,

Draper,

UT

84020-1685

I

luxuLcom

I

801-822-5450

LUX-OIG-XAP-1210

0630140308

LU

ll

UL

Simply

Connected

Warning:

Exposure

to

Radio

Frequency

(RF)

Radiation:

The radiated

output

of

this device

is

below

the

FCC

radio frequency exposure limits. Nevertheless,

the

device should be used

in

such a manner

that

the

potential

for

human

contact

during normal

operation

is

minimized.

~

The end user must avoid any extended human

RF

exposure directly in

front

of

the

device, up

to

a distance

of

20cm, when

unit

is

on.

~

When servicing

the

equipment and selecting a location

for

the

antennas,

it

is

important

to

note

that

a minimum distance

of

20cm

is

required between personnel and

the

device

or

antenna

to

comply

with

the

radio frequency exposure limit.

~

The antenna used

for

this transmitter must be installed

to

provide a separation distance

of

at

least 20cm

from

all persons and must

not

be co-located

or

operating

in

conjunction

with

any

other

antenna

or

transmitter.

The

following safety precautions should be observed:

~

Do

not

touch

or

move

the

antenna

while

the

unit

is

transmitting

or

receiving.

~

Do

not

hold

any

component

containing

the

radio such

that

the

antenna

is

very close

or

touching

any exposed parts

of

the

body, especially

the

face

or

eyes,

while transmitting.

~

Do

not

operate

the

radio

or

attempt

to

transmit data unless

the

antenna

is

connected; this

behavior may cause damage

to

the

radio.

FCC

Statement-Wireless

FCC

2.4GHz 802.llbgn

This device complies

with

Part

15

of

the

FCC

Rules.

Operation

is

subject

to

the

following

two

conditions:

(1)

This device may

not

cause harmful interference, and

(2)

this device must accept any

interference received, including interference

that

may cause undesired operation.

This equipment

has

been tested and found

to

comply

with

the

limits

for

a

Class

B digital device,

pursuant

to

Part

15

of

the

FCC

Rules.

These limits are designed

to

provide reasonable

protection

against harmful interference in a residential installation. This equipment generates,

uses

and can

radiate radio frequency energy and,

if

not

installed and used in accordance

with

the

instructions,

may cause harmful interference

to

radio communications. However, there

is

no

guarantee

that

interference

will

not

occur in a particular installation.

If

this equipment does cause harmful interfer-

ence

to

radio

or

television reception, which can be determined by turning

the

equipment

off

and

on,

the

user

is

encouraged

to

try

to

correct

the

interference by one

of

the

following

measures:

~

Reorient

or

relocate

the

receiving antenna.

~

Increase

the

separation between

the

equipment and receiver.

~

Connect

the

equipment

into

an

outlet

on a circuit

different

from

that

to

which

the

receiver

is

connected.

~

Consult

the

dealer

or

an

experienced

radio/TV

technician

for

help.

FCC

Caution:

Any changes

or

modifications

not

expressly approved by

the

party responsible

for

compliance could void

the

user's

authority

to

operate this equipment.

This transmitter must

not

be co-located

or

operating

in

conjunction

with

any

other

antenna

or

transmitter.

©

2014

Luxul.

All

Rights

Reserved.

Other

trademarks

and

registered

trademarks

are

the

property

of

their

respective

owners

Radiation

Exposure

Statement

This

equipment

complies

with

FCC

radiation exposure limits set

forth

for

an

uncontrolled

environ-

ment. This

equipment

should be installed and operated

with

minimum distance 20cm between

the

radiator and

your

body.

NOTE:

O)The

manufacturer

is

not

responsible

for

any radio

or

TV

interference caused

by unauthorized modifications

to

this equipment.(2)

To

avoid unnecessary

radiation interference,

it

is

recommended

to

use

a shielded

RJ45

cable

Industry

Canada

(RSS-Gen)

This device complies

with

Industry Canada licence-exempt

RSS

standard(s). Operation

is

subject

to

the

following

two

conditions:

OJ

this device may

not

cause interference, and (2)this device

must

accept any interference, including interference

that

may cause undesired operation

of

the

device.

Le

present appareil est

conforme

aux CNR d'lndustrie Canada applicables aux appareilsradio ex-

empts de licence. L'exploitation est autorisee aux deux conditions suivantes: (l)l'appareil ne

doit

pas

produire

de

brouillage,

et

(2)

l'utilisateur de l'appareil

doit

accepter

tout

brouillage radioelectrique

subi, meme

si

le brouillage est susceptible d'en

compromettre

le fonctionnement.

The device meets

the

exemption

from

the

routine evaluation limits in section

2.5

of

RSS

102 and

compliance

with

RSS-102

RF

exposure, users can obtain Canadian

information

on

RF

exposure and

compliance.

Le

dispositif

rencontre ['exemption des limites courantes d'evaluation dans la section

2.5

de

RSS

102

et

la

conformite

a ['exposition

de

RSS-102

rf,

utilisateurs

peut

obtenir

['information canadienne sur

['exposition

et

la

conformite

de

rf.

This

transmitter

must

not

be co-located

or

operating in

conjunction

with

any

other

antenna

or

transmitter. This

equipment

should be installed and operated

with

a

minimum

distance

of

20

centimeters between

the

radiator and

your

body.

Cet

emetteur

ne

doit

pas

etre

Co-place

ou

ne

fonctionnant

en meme temps qu'aucune autre

antenne

ou

emetteur. Cet equipement devrait etre installe

et

actionne avec une distance

minimum

de

20 centimetres entre le radiateur

et

votre

corps.

CAN ICES-03(B)/NMB-3(B)

Information

on

this

document

supersedes all previous versions. Products and documents

subject

to

change

without

notice. Products may be discontinued

without

notice.

LUX-QIG-XAP-1210

0630140308

14203

Minuteman

Drive,

Suite

201,

Draper,

UT

84020-1685

luxul.com I

801-822-5450

Luxul Wireless XAP1210 High Power Wireless 300N Low Profile Access Point User Manual LUX QIG XAP 1210 indd

Luxul Wireless High Power Wireless 300N Low Profile Access Point LUX QIG XAP 1210 indd

User Manual

Navigation menu

Namespaces

Views

Navigation