Luxul Wireless XWOBAP1 High Power AC1200 Dual-Band Outdoor Bridging AP User Manual Professional Installation Statements

Luxul Wireless High Power AC1200 Dual-Band Outdoor Bridging AP Professional Installation Statements

Contents

User Manual (Professional Installation Statements).pdf

Fold©2016 Luxul. All Rights Reserved.The name Luxul, the Luxul logo, the Luxul logo mark and Simply Connected are all trademarks and/or registered trademarks of Luxul Wireless, Inc. All other trademarks and registered trademarks are property of their  respective holders.LUX-REG-COM-This documentation contains regulatory compliance and safety information. No part of this publication, or any other publication may be modified or adapted in any way, for any purposes without written permission from Luxul. FCC WARNING PROFESSIONAL INSTALLATION INSTRUCTION14203 Minuteman Drive, Suite 201 Draper, UT 84020-72111-801-822-5450Last Update: Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncon-trolled environment. This equipment should be installed and operated with minimum distance 40cm between the radiator & your body.Déclaration d’exposition aux radiations:Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 40 cm de distance entre la source de rayonnement et votre corps.XWO-BAP1High Power AC1200 Dual-Band Outdoor Bridging APXWOBAP1-18071607/18/16
FoldProfessional installation instructionInstallation personal This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting.Installation location The product shall be installed at a location where the radiating antenna can be kept 40cm from nearby person in normal operation condition to meet regulatory RF exposure requirement.External antenna Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may produce unwanted spurious or excessive RF transmitting power which may lead to the violation of FCC/IC limit and is prohibited.Installation procedure Please refer to user’s manual for the detail. wWarning:  Please carefully select the installation position and make sure that the final output power does not exceed the limit set force in relevant rules. The violation of the rule could lead to serious federal penalty.To professional installer: 5.15-5.25G band (UNII band 1) is certified to indoor use only. Installer must disable UNII band 1 by provided proprietary tool when you install this device for outdoor application to comply with FCC requirement.IC WARNINGInstructions d’installation professionnelleInstallation Ce produit est destine a un usage specifique et doit etre installe par un personnel qualifie maitrisant les radiofrequences et les regles s’y rapportant. L’installation et les reglages ne doivent pas etre modifies par l’utilisateur final.Emplacement d’installationEn usage normal, afin de respecter les exigences reglementaires concernant l’exposition aux radiofrequences, ce produit doit etre installe de facon a respecter une distance de 40 cm entre l’antenne emettrice et les personnes.Antenn externe.Utiliser uniiquement les antennes approuvees par le fabricant. L’utilisation d’autres antennes peut conduire a un niveau de rayonnement essentiel ou non essentiel depassant les niveaux limites definis par FCC/IC, ce qui est interdit.Procedure d’installationConsulter le manuel d’utilisation.AvertissementChoisir avec soin la position d’installation et s’assurer que la puissance de sortie ne depasse pas les limites en vigueur. La violation de cette regle peut conduire a de serieuses penalites federales.

Navigation menu