M Labs Technologies TALONCV002 CDMA vehicle tracking device User Manual TALONCV002

Download:
Mirror Download [FCC.gov]
Document ID	2293986
Application ID	NYHiIb+bHrFWzcMTsJHgVA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.77kB (359615 bits)
Date Submitted	2014-06-13 00:00:00
Date Available	2014-06-13 00:00:00
Creation Date	2014-06-11 16:42:17
Producing Software	Acrobat Distiller 9.5.5 (Windows)
Document Lastmod	2014-06-11 16:42:17
Document Title	Microsoft Word - TALONCV002 User Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

TALONCV002 User Manual
TALONCV002 User Manual
R1.0
Author
Revision
Changes
Date
Ran
1.0
Initial version
2014‐05‐29
Copyright ©MONTAGE SYSTEMS, INC. All rights reserved.
Confidential Material: This document contains information that is proprietary and
confidential, reading and copying this document is prohibited without
permission.
TALONCV002 User Manual
Contents
1 Introduction .............................................................................................................................. 3
ID and Tooling Design ........................................................................................................................ 4
2 Hardware Design ....................................................................................................................... 5
2.1
Basic Hardware.................................................................................................................. 5
2.2
Basic RF Performance ........................................................................................................ 7
2.3
Certification and Safety ..................................................................................................... 9
3 Software Features ................................................................................................................... 10
3.1
Basic Software ................................................................................................................. 10
3.2
Remote Update ............................................................................................................... 10
3.2.1
Auto Execute ........................................................................................................... 10
3.3
Power Modes .................................................................................................................. 10
3.4
AT Command ................................................................................................................... 11
3.5
Report.............................................................................................................................. 13
3.6
Reset ................................................................................................................................ 13
3.6.1
Context Preservation ............................................................................................... 13
3.7
Startup Banner ................................................................................................................ 13
4 Test Method ............................................................................................................................ 14
4.1
Hardware ......................................................................................................................... 14
4.2
Software Test ................................................................................................................... 14
TALONCV002 User Manual
1 Introduction
The TALONCV002 is a self‐contained vehicle tracking device that combines GPS location with
CDMA connectivity.
Logically, the ION appears to a user or a server application as a single endpoint device. It can
be queried, updated and configured either through a serial connection, or an over the air
CDMA IP connection, or through SMS messaging. The TALONCV002 presents itself over
these connections as an enhanced cellular modem with attached functional elements. These
elements include:
GPS location engine
2 General Purpose Bidirectional I/O (GPIO) pins
1 Relay drive pin output
Serial UART port
Input voltage monitor (optional)
Timers
Watchdog lockup protection (Dedicated watchdog circuit is optional)
Factory load option for motion detection
Access to these elements and general purpose interfaces is done through an extended AT
command set as defined herein.
Application scene:
This product will be designed based on the VIA CBP8.2 CDMA 1X 800M&1900M Baseband
chipset, which includes GPS functionality, ARM CPU and CDMA protocol. This baseband
external connection 256M serial flash, CDMA 800M/1900M/GPS RF Transceiver, and RF
Front end circuit.
The device will use one dual band antenna（CDMA800&CDMA1900）and one dedicate GPS
antenna.
TALONCV002 User Manual
ID and Tooling Design
The housing will be provided by customer. The product appearance is shown as follows:
Item
Definition
Dimension
86.7( L )*30 .8( W )*10.7( H )mm
Weight
TALONCV002 User Manual
2 Hardware Design
2.1
Basic Hardware
Items
Requirement
Baseband Chipset
VIA CBP8.2C/CBP8.2D
RF Transceiver
FCI7790
Memory
Serial Flash 256Mb
PSRAM 128Mb/64Mb (optional)
Air Interface
CDMA 2000 1x, GPS
Frequency
CDMA2000 1x: 800MHz,1900MHz
Antenna
Internal Antenna(800M&1900M)
GPS Antenna
Dedicate high performance ceramic antenna
UIM requirement
No‐UIM mode, UIM card connector optional
Interface
UART TX
UART RX
12V DC Input（1A current）
Relay Drive (12V Output ,500mA current)
GPIO1
GPIO2
Battery Monitor
Build in battery manager
Dedicate Timers
Watchdog
Motion Detect
LED
Battery
Working Time
Power switch
Power Cable color
Power Cable connector type
Power Consumption
Built‐in battery
internal analog input scaled (Optional)
Supported
No
Supported(Dedicate Watchdog is Optional)
Optional（GPS/Sensor）
2 LED Supported
2 LEDs(one is RED，one is Green)
Build in battery（80MAH Lion）
4hours
No
8 colors
8 pin
< 5Watts
3.7V 80mAh Li‐ion battery
The TALONCV002 provides support for specialized hardware features through extended AT
commands. The features supported include the following.
GPS
The major functionality of the GPS module is to compute the correlation results between the
incoming signal and the selected PRN code based on certain Carrier Doppler Frequency, Code
Doppler Frequency, code phase, carrier phase, and the particular satellite the module is
tracking or acquiring.
GPIO
TALONCV002 User Manual
Two GPIO pins, GP1 and GP2, are presented to the external environment on the main
connector. They are general purpose bidirectional lines capable of providing system
interrupts to generate a report or drive logic levels to external devices. These lines are 2.8V
logic level and are 15V tolerant. These pins default to input. GP1 is pulled down representing
0 when disconnected; GP2 is pulled up representing logical 1 when disconnected. They
should be asserted to a known value if used. GP1 is intended to use for Ignition Sensing.
LED’s
Two LED status indicators are provided to verify correct installation and operation. The
status LEDs are color coded and directly convey the status of the CDMA and GPS subsystems
as described in the table below. Their valid operation also indicates operational status and
power.
LED
Function
Status
Red
GPS
On: GPS satellites acquired and
Locked
Flash Slow: GPS satellite search is
in progress
Off: No power or GPS subsystem
fault
Green
CDMA/CDMA Connection
On: Indicates CDMA connection is
made
Flash Slow: CDMA subsystem
initialized but no connection
Flash Fast: CDMA initialization in
process
Off: No power or CDMA
subsystem fault
The ION provides user control allowing the LEDs to be extinguished once installation is
verified. This feature reduces power and further conceals the ION Tracker from untrained
parties wishing to defeat its operation.
UART
A UART port is provided for AT command and data interaction and optionally for application
specific control. When in power down mode, a character must be sent to the UART first to
wake it up. The port will stay awake for 5 seconds after any character received.
Relay Driver
A 500mA sink capable output pin is provided. This pin is meant to drive a relay coil indented
to interrupt the starter solenoid relay for the ignition circuit to a car.
Battery Monitor
The battery monitor is internal analog input scaled such that the DC value of the power input
pin to the ION system is measured. This value is scaled to span the most significant 8 bits of
the A/D and consequently covers a scale from 0 to 25.5 Volts.
Timers
Timers resident on the CDMA baseband chip generate periodic interrupts for power down
wakeup, watchdog support, report generation and other timer related functions. Report
timers are supported by related AT command and cause generation of periodic reports.
TALONCV002 User Manual
Watchdog
CBP8.2 chipset provide internal software Watchdog, and a physically dedicate Watchdog
circuit requirement is optional.
Motion Detect (Option)
A factory populates option for motion detector is provided. If populated at the time the
TALONCV002 is manufactured, this option will work with firmware power down options to
keep the TALONCV002 in a very low power down state until motion is detected. Upon
wakening, a report can then be generated.
2.2
Basic RF Performance
Items
Requirements
Remark
TRP free space
>= 20 dBm
TRP free space
TIS free space
<= ‐104dBm
TIS free space
Antenna loss
<= ‐3 dB
TRP‐TX Power Conducted
Antenna Loss
<= ‐3 dB
RX receive sensitivity conducted –
TIS
Board RF Specification
Cellular Band RX
Frequency range
869MHz～894MHz
Sensitivity
‐108dBm (FER≤0.5%)
Dynamic range
‐25～‐108dBm (FER≤0.5%)
Single tone Desensitization
‐102.4dBm(FER≤1%,‐30dBm@±900KHz)
Intermediation Spurious
Response Attenuation
Conducted Spurious
Emission
‐102.4dBm(FER≤1%,‐43dBm@±900 KHz/±1700KHz)
‐91.4dBm(FER≤1%,‐32dBm @±900 KHz/±1700KHz)
‐80.4dBm(FER≤1%,‐21dBm @±900 KHz/±1700KHz)
<‐76dBm/1MHz（RX band）
<‐61dBm/1MHz（ TX band）
<‐47dBm/30KHz（other frequency）
Cellular Band TX
Frequency range
824MHz～849MHz
Maximum Frequency error
±300KHz
Maximum output power
20～24dBm
Minimum controlled output
power
<‐50dBm
Standby output power
<‐61dBm
Code domain power
The code domain power in each inactive code channel
shall be 23 dB or more below the total output power
measured on both the I and Q data channel combined.
Time reference
±1.0uS
Waveform quality
>0.944
Range of open loop output
（test1：－25dBm/1.23MHz）－47.7±9.5dBm
TALONCV002 User Manual
（test2：－60dBm/1.23MHz）－7.7±9.5dBm
power
（test3：－93.5dBm/1.23MHz）20.3±9.5dBm
‐42dBc/30Khzor‐54dBm/1.23MHz
（|Δf|:1.25MHz~1.98MHz）
‐50dBc/30Khzor‐54dBm/1.23MHz
（|Δf|: 1.98MHz~4.00MHz）
Conducted spurious emission
<‐36dBm/1kHz
（|Δf| > 4MHz, 9KHz < f < 150KHz,）
<‐36dBm/10kHz
（|Δf| > 4MHz, 150kHz 4MHz, 30MHz 4MHz, 1GHz0.944
Range of open loop output
power
(test1: ‐25dBm/1.23MHz) ‐50.7±9.5dBm
Conducted spurious emission
(test2: ‐60dBm/1.23MHz) ‐10.7±9.5dBm
(test3: ‐91.3dBm/1.23MHz) 20.3±9.5dBm
TALONCV002 User Manual
‐42dBc/30Khzor‐54dBm/1.23MHz
(|Δf|:885KHz~1.98MHz)
‐54dBc/30Khzor‐54dBm/1.23MHz
1.98MHz~4.00MHz)
(|Δf|:
<‐36dBm/1kHz (|Δf| > 4MHz, 9KHz < f < 150KHz)
<‐36dBm/10kHz (|Δf| > 4MHz, 150kHz 4MHz, 30MHz 4MHz, 1GHz; BIN:; MEID/ESN:
APN1:; IP::;LPORT:
RI:; DTE:; DI:; HB:; NR:; RS:
13
TALONCV002 User Manual
4 Test Method
4.1
Hardware
Test Item
Description
Baseband Function Test
•
•
•
•
•
•
•
•
•
•
Power Input Test
Power Consumption and Current Test
Heat Dissipation Test
UART Stability Test
GPIO Level Test
LED Stability Test
Drop Down Test
ESD Test
High/Low Temperature Test
Humidity Test
RF Test
•
•
•
RF Performance Test
GPS Performance Test
Antenna Performance Test
4.2
Software Test
Test Environment Construct
 message Test environment
1.usb dongle and PC as message server
2.send message to IONX
 UDP Test environment
1.connect dongle to PC and create dialup as ip server
2.IONX create IP connection to server
 UART Test environment
1.connect IONX to pc with com serial cable
2.open Termial tool and send at command
3.reponse can be shown at terminal window
14
TALONCV002 User Manual
Test Items
Description
Extension Features Test
CDG2/3 Test
Basic Function Test
Field Test
15
TALONCV002 User Manual
Caution
The devise cannot be used within 20cm of any persons and must not be co‐located
within 20cm of other transmitter antennas.
16

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2014:06:11 16:42:17+08:00
Modify Date                     : 2014:06:11 16:42:17+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - TALONCV002 User Manual
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Document ID                     : uuid:de6f4083-23ca-4dcd-a02e-f47cbc25ac2c
Instance ID                     : uuid:1e31a4ac-e58a-4f9e-8b93-dd0479e2ab56
Page Count                      : 16

EXIF Metadata provided by EXIF.tools