M and F Technologies E228-7 4G WIFI Router User Manual
Maestro Wireless Solutions Limited 4G WIFI Router
User manual
E220 Series Quick Start Guide V3 Table of Contents 1.0 Terms and Conditions ...........................................................................................3 2.0 E220 Series: ...............................................................................................................4 3.0 Setup: ............................................................................................................................5 3.1 Prerequisite ....................................................................................................................... 5 3.2 Available Accessories ................................................................................................... 6 4.0 Maestro Router Overview ...................................................................................7 4.1 LAN Panel Details............................................................................................................ 7 4.2 WAN Panel Details .......................................................................................................... 9 4.3 Front Panel Details ....................................................................................................... 10 5.0 Connecting Maestro Router .............................................................................11 6.0 Software Configuration......................................................................................14 7.0 Conformity ................................................................................................................17 7.1 Federal Communications Commission (FCC) Compliance Statement 17 7.2 FCC RF Exposure statement ..................................................................................... 17 7.3 ISED Notice...................................................................................................................... 17 7.4 ISED RF Exposure Information.............................................................................. 18 8.0 Appendix: ....................................................................................................................0 8.1 Pin Power Cable Schematic ....................................................................................... 0 8.2 Power over Ethernet ..................................................................................................... 1 8.3 RS485 wiring diagram .................................................................................................. 2 8.4 Certified antenna ............................................................................................................ 3 8.5 Selection of antenna...................................................................................................... 3 E220 Series| QUICK START GUIDE http://support.maestro-wireless.com Page | 2 1.0 Terms and Conditions 1.1.1 This manual is written without warranty. 1.1.2 Maestro Wireless Solutions Ltd. reserves the right to modify or improve the product and its accessories, which can also be withdrawn without prior notice. 1.1.3 The company stresses the fact that the performance of the product and its accessories depend on the proper use conditions as well as the surrounding environment. 1.1.4 Maestro Wireless Solutions Ltd. assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the router and this manual. 1.1.5 Every effort is made to keep the product and its software up to date and running smoothly. However, Maestro Wireless Solutions Ltd. takes no responsibility for, and will not be liable for the product or its software being temporarily unavailable due to technical issues beyond our control. 1.1.6 The above terms and conditions are subject to change without prior notice. The present use of this product implies that the user approves and understands all the above terms and conditions. E220 Series| QUICK START GUIDE http://support.maestro-wireless.com Page | 3 2.0 E220 Series: Table 1: E220 Series compatible models Product name Territories / Operators Bands Fallback mode Bands Cellular Type E224 EMEA 3/8/20 2G 3/8 LTE cat. 1 E224 AT&T, T-Mobile 2/4/12 None N/A LTE cat. 1 E225 Lite EMEA. Asia 1/8 2G 3/8 3G [1] E225 Lite World 1/2/5/6/8/19 2G 2/3/5/8 3G [1] E225 EMEA, Asia 1/8 2G 3/8 3G [1] E225 Worldwide 1/2/5/6/8/19 2G 2/3/5/8 3G [1] E228 Verizon Wireless 4/13 None N/A LTE cat. 4 E228 AT&T, Rogers 2/4/5/13/17 3G [2] 2/5 LTE cat. 4 E228 Telstra, Spark 3/7/28 None N/A LTE cat. 4 E228 NTT Docomo 1/19/21 None N/A LTE cat. 4 E228 Korea, Thailand, Brazil, etc. 1/3/5/7 None N/A LTE cat. 4 [1] 7.2Mbps downlink; 5.76Mbps uplink; [2] 43.2Mbps downlink; 5.76Mbps uplink Figure 1: E220 Series: High-speed 3G or LTE router E220 Series| QUICK START GUIDE http://support.maestro-wireless.com Page | 4 3.0 Setup: 3.1 Prerequisite 3.1.1 Before installing your E220 Series router, verify you have the following: Router Hardware with: Active sim card Ethernet cable Wi-Fi and cellular antennas Computer equipped with: 3.1.2 Windows, Mac or Linux operating system. Ethernet port or Wi-Fi connectivity and Internet service Web browser such as Internet Explorer 8+ or Google Chrome, Mozilla Firefox or Safari to access the Maestro Web Admin Console DHCP set to enable. To enable DHCP, do the following: From the Start menu, select Control Panel > Network and Sharing Center and then select the existing connection. The Network Connection Status dialog box appears. Click Properties > double click Internet Protocol Version 4 (TCP/IPv4). The Internet Protocol Version 4 (TCP/IPv4) Properties dialog box appears. Under the tab General, select Obtain an IP address automatically and Obtain DNS server address automatically. E220 Series| QUICK START GUIDE http://support.maestro-wireless.com Page | 5 3.2 Available Accessories Table 2: The following accessories are available for purchase: Item Description Power Supply / Cable ACC-CA30 2-pin Micro-Fit 3.0 (M) to stripped wire with 2.5 A fused, 1-metre long cable ACC-PS20 2-pin Molex 1.2A power adapter with Euro plug 2-pin - Europe ACC-PS21 2-pin Molex 1.2A power adapter with NEMA 2-pin plug - America ACC-PS22 2-pin Molex 1.2A power adapter with AS3112 3-pin plug – Australia / NZ ACC-PS23 2-pin Molex 1.2A power adapter with BS1363 3-pin plug - UK Wi-Fi Antenna ACC-A21 5-band 2.4 / 5.8GHz dipole antenna, hinged RP-SMA (M) Cellular / GPS Antenna ACC-A11 or ACC-A17A 5-band 850 / 900 / 1800 / 1900 / 2100MHz magnetic mount antenna, 3-meter cable, SMA (M) ACC-A03 GPS 1575.42MHz Magnetic mount antenna, 3-meter cable, SMA (M) ACC-A22 Ultra-wide-band 698-960 / 1575.42 / 1710-2700MHz L-shaped antenna, hinged, SMA (M) Miscellaneous ACC-DIN Metal DIN Rail clip ACC-CA29 RJ45(M) to RJ45(M)-cable length=1000mm 3.2.1 For a full list of Maestro Wireless accessories, refer to: http://www.maestrowireless.com/accessories/ E220 Series| QUICK START GUIDE http://support.maestro-wireless.com Page | 6 4.0 Maestro Router Overview 4.1 LAN Panel Details Figure 2: Maestro Router LAN Panel Yellow - Wi-Fi Connector: RP-SMA antenna connector Orange - Reset Button: When pushed for 3 seconds the device will reset to default settings. Green - DC Power Supply: 2-pin Micro-fit 3.0 connector. Black (left) negative red (right) positive. Blue - Ethernet port (LAN): Ethernet cable connects to LAN Red - RS-485 & Digital input/output ports (see figure 3 next page): E220 Series| QUICK START GUIDE http://support.maestro-wireless.com Page | 7 Figure 3: Maestro Router LAN Panel I/O connector Red - Top slots are release pins for bottom ports. Blue - RS-485 Full-duplex: B: Rx – A: Rx + G: Common Ground Y: Tx + Z: Tx – Half-duplex A&Y: DATA + B&Z: DATA – G: Common Ground Green - DIO Ports configurable as input or output, 20 AWG (recommended). Input detection: 5V, max. 48V Output: Open collector, max. current 200mA Yellow - Ground for both DIOs E220 Series| QUICK START GUIDE http://support.maestro-wireless.com Page | 8 4.2 WAN Panel Details Figure 4: Maestro Router WAN Panel Blue - Ethernet port: Can switch from WAN to LAN Supports PoE (Power over Ethernet): PoE wired Ethernet LANs allow the electrical current necessary for the operation to be carried by the data cable rather than carried by power cords thus removing the needs for an external power supply. Green – Mini SIM slot (2FF) Orange – GPS / Diversity SMA Antenna Connector: Female (GPS only on LTE version) Yellow - Cellular SMA Antenna Connector: Female E220 Series| QUICK START GUIDE http://support.maestro-wireless.com Page | 9 4.3 Front Panel Details Figure 5: Front Panel 4.3.1 The top panel of Maestro’s E220 Series features 6 LEDs on the front to indicate critical system information. Table 3: LED States and Description Name WI-FI Activity Network Signal Power Alert Color and State Description OFF Wi-Fi network is inactive Blue Flashing Wi-Fi network connection traffic Blue ON Wi-Fi network is up and activate OFF Cellular data service is not connected Amber ON Cellular data service is connected OFF Device is not registered on a cellular network Amber Flashing Registered on roaming cellular network Amber ON Registered on home cellular network OFF No signal (CSQ=0 to 5, 97, 98, 99) Amber ON Strong signal (CSQ > 12) Amber Flashing Weak signal (CSQ > 6 to 12) OFF Power off Green ON Power on OFF No alert, device is running smoothly Red Flashing Software fault (crash, issues) Red ON Hardware fault (high temperature, problem with module or SIM card) E220 Series| QUICK START GUIDE http://support.maestro-wireless.com Page | 10 5.0 Connecting Maestro Router 5.1.1 Insert the SIM card in the router as shown below. Figure 6: Inserting the SIM card in the Maestro router 5.1.2 Connect the antenna to the main connector of the E220. IMPORTANT: Verify the antenna is tightly secured. 5.1.3 Connect the Diversity antenna to the Diversity connector. E220 Series| QUICK START GUIDE http://support.maestro-wireless.com Page | 11 Figure 7: Connecting the Wi-Fi & cellular antenna on Maestro router: 5.1.4 If the Maestro Router package includes dual antenna’; connect the Diversity Antenna to the Diversity Connector. NOTE: Dual antenna provides RF diversification, which allows for improved signal strength and thus better performance for both Wi-Fi and cellular, Certain circumstances and environments may require the use of specific type of antenna or one mounted in a different location. In such case, Maestro has many antenna options to choose from, please contact Maestro Support at support@maestro-wireless.com. Table 4: E220 series models and auxiliary antennas: Main Cellular only Model Auxiliary E225 Lite N/A E224 Lite Cellular only E225 GPS only E224 E228 2-mode GPS and cellular E220 Series| QUICK START GUIDE Comment Please ensure that the antenna used is suitable for the cellular frequencies in use, for both main and auxiliary connectors Please ensure that the antenna used is suitable for the cellular frequencies in use, for both main and auxiliary connectors http://support.maestro-wireless.com Page | 12 5.1.5 Connect the router LAN port with the computer LAN port. Figure 8: Connecting the router and computer LAN port 5.1.6 Connect the AC power to the DC in connector, then connect the Micro-Fit connector to the power input, located on the LAN-side panel of the Maestro Router. Plug the AC cord into a standard AC receptacle as shown below. The power LED will light when power is applied. Figure 9: Connecting the AC power connector 5.1.7 An alternate option is to power the Maestro Router over Ethernet port as the WAN port supports PoE (Power over Ethernet). NOTE: Please refer to the section Power over Ethernet on Appendix 1 for connections example. E220 Series| QUICK START GUIDE http://support.maestro-wireless.com Page | 13 6.0 Software Configuration 6.1.1 On the computer, open a Web browser and then enter the Maestro routers LAN IP address. A login dialog window displays. NOTE: Username and Password are case sensitive. Figure 10: Login Dialog Box Table 5: Web Admin Page Parameters Details IP Address (LAN) 192.168.1.1 Username admin Password admin Table 6: Wi-Fi enabled, with WPA/WPA2 TKIP key 6.1.2 Parameter Details SSID Maestro WPA Key W1rele$$ Click Next on the Quick Start Network Configuration Page (figure 11). 6.1.2.1 Configure the network parameters for LAN, WAN, Cellular and Wi-Fi. 6.1.2.2 Alternately, go to Management Settings, import and load predefined settings file. 6.1.2.3 Click Save & Apply to set the configuration. NOTE: Default WAN, LAN and cellular connection settings: 6.1.2.4 WAN connection – Automatic (DHCP – Automatic IP address lookup). 6.1.2.5 Active DHCP with starting IP address: 192.168.1.100 with poll off 100 clients. 6.1.2.6 WAN as automatic IP, with Cellular backup. E220 Series| QUICK START GUIDE http://support.maestro-wireless.com Page | 14 6.1.2.7 Cellular default APN is “internet” Figure 11: Quick Start Network Configuration Page E220 Series| QUICK START GUIDE http://support.maestro-wireless.com Page | 15 Table 7: Quick Start Network Configuration Page Screen Element Description Local Network IPv4-Address Enter the IPv4 Address of LAN interface. The default IPv4 Address is 192.168.1.1 IPv4-Netmask Enter the IPv4 Subnet Mask of LAN interface. The default Netmask is 255.255.255.0 IPv4-Gateway Enter the Gateway IPv4 of the Gateway. WAN Protocol Select the WAN protocol from the available options: Manual Automatic PPPoE The default WAN protocol is selected as Automatic. Cellular APN Enter the APN provided by the cellular network operator. Access Point Name (APN) is the name (Web address) of an access point for LTE data connection. Generally, wireless cellular network operator provides the APN to their end users. PIN Enter the PIN of the SIM card. SIM card Personal Identification Number (PIN) is used to lock the card, preventing unauthorized phone calls or access to cellular data. Username Enter the login name. Password Enter the password. Wi-Fi Enable By default, Wi-Fi interface is enabled every time the Maestro Router reboots. Click and disable the Wi-Fi interface if you do not want to use them. SSID Service Set Identifier (SSID) is a sequence of characters, which uniquely names a wireless local area network (WLAN). The default SSID is Maestro. Password The default password is W1rele$$. E220 Series| QUICK START GUIDE http://support.maestro-wireless.com Page | 16 7.0 Conformity 7.1 Federal Communications Commission (FCC) Compliance Statement 7.1.1 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. 7.1.2 This device has been tested and found to comply with the limits for a Class B digital pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy. 7.1.2.1 It not installed and used in accordance with the instructions, may cause harmful interference to radio communications. here is no guarantee that interference will not occur in a particular installation. 7.1.2.2 If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 7.1.3 Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: 7.1.3.1 Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 7.2 FCC RF Exposure statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. 7.3 ISED Notice This device complies with Innovation, Science and Economic Development Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. E220 Series| QUICK START GUIDE http://support.maestro-wireless.com Page | 17 Le présent appareil est conforme aux CNR Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. IC: 20055-E228F7, 20055-E224LITEF2, 20055-E224LITEF4, 20055-E225LITEF3, 20055-E225F3, 20055-E228F2, 20055-E228F5 7.4 ISED RF Exposure Information This device complies with ISED radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the ISED radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. Cet appareil est conforme aux limites d'exposition aux rayonnements de la ISED CNR-102 définies pour un environnement non contrôlé. Afin d'éviter la possibilité de dépasser les limites d'exposition aux fréquences radio de la ISED CNR-102, la proximité humaine à l'antenne ne doit pas être inférieure à 20 cm (8 pouces) pendant le fonctionnement normal. E220 Series| QUICK START GUIDE http://support.maestro-wireless.com Page | 18 8.0 Appendix: 8.1 Pin Power Cable Schematic Figure 12: 8.2 Power over Ethernet Figure 13: PoE _____________________________________________________________________________________ 8.3 RS485 wiring diagram Figure 14: Half Duplex (Left) RS485 Full Duplex (Right) _____________________________________________________________________________________ 8.4 Certified antenna Dipole Wi-Fi antenna: 5 dBi high performance antenna RP-SMA(M) hinged antenna RoHS compliant Peak gain: 3.8 dBi @2.4 GHz ~ 2.5 GHz WWAN antenna: Dipole 4G swivel blade antenna Performance across the LTE frequency bands 698-960 / 1710-2170 / 2500-2700 MHz Up to 2 dBi gain SMA connector RoHS compliant product 8.5 Selection of antenna Selection of Wi-Fi antenna: Dipole, Peak Gain < 3.8 dBi @ 2.4 GHz ~ 2.5 GHz Selection of antenna type: Using the same dipole antenna type as certified module & Modem for FCC as above or external antenna with length > 20 cm. _____________________________________________________________________________________
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 1 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:e1de2f71-a761-11f2-0000-02c7314339d4 Producer : GPL Ghostscript 9.18 Modify Date : 2017:07:23 01:22:03Z Create Date : 2017:07:23 01:22:03Z Creator Tool : UnknownApplication Document ID : uuid:e1de2f71-a761-11f2-0000-02c7314339d4 Format : application/pdf Title : UntitledEXIF Metadata provided by EXIF.tools