MAG Technology Co U7003-01 Color Monitor User Manual 8

Download:
Mirror Download [FCC.gov]
Document ID	44777
Application ID	7JZHrkpW0ehcVMexfH+7KQ==
Document Description	8
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	36.11kB (451344 bits)
Date Submitted	1999-06-29 00:00:00
Date Available	1999-08-25 00:00:00
Creation Date	2001-06-21 20:48:28
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-06-21 20:48:29
Document Title	8

JAG"
17" (l 6.0" vlewable)
Ultra ngh Resolution
Plug & Play Ready
Color Monltor
wlth JAGT'“I 050 Control
XJ770 Monitor 3
Contents
TCO 95 Environmental Labelling 4
Specifications 6
safety Precautions 7
introduction 3
JAGm Control 8
OnScreen Display [OSD] 8
BBC Plug 8. Play 9
TCOCompliant 9
EPN“ Energy Star®and VESNBDispIay PowerManagement System 9
Setting up Your Monitor 10
Operation 11
lmageMjustment 1 2
OSDOpfions 12
Wdeo Modes l 4
PinAssignment 15
Regulatory Compliance Statements 16
Customer Senllce 18
XJ770 Monitor 5
TCO 95 is a co—opmfive project belween rm (The Swedish mm of Prafenioml
Emplflyces), Nllnrskyddlformnxun (The Swedish Society for Nun-m Cmrvnfian) dud
NUTEK (The Natitmll Board fvr Mush-in] and Tcdmicll Devclmmmil in Sweden)
Emu-menu! Requlmnems
Bromlnlwd flame unrdams
Brmmnned flame retardants us pmsml in primed cilwil bonds, which, wiles. using and
huusiugu In lulu. they ddhy Ihe iprfld ur fire . Up an thiny pmnu of the pluiic in u
compinw casing an consist of flame retardant submncz, Then m milled m mother group
of environmenla! mm. PCB; which an sin-puma w pin mu m limilur harm. minding
mpmduclive damage in (whittling birds and mammals. the ln hhe blu-wcumuhfive' plum.
Flame nurdmls have been found in hut-run bland Ind reruwhers felt that dismbancu in
foetus developmenls my new.
nervous sysum m in ,
we 95 rcqilimn
duvcioped.
Cadmlum"
Cadmium is - _ . - - ., layer: of min
con-pine! display. gh added.
rco as reqnilun - . ppm mm per
millum) of cadmi .
cadmium.
Mercury"
Mumiry is nmfiuuus . ,
symm udd is toxic iii hi agagw
TCD 95 requirement slum - r: f i ~ -.v are than 15 ppm (puns per
million) of mad-wry. h mu dun- Wmm in my nub: electric-l in
electronics cumpolwms summed wiih lh: '
crc: ||uons|
crc; (Ream) m sometimes used for wishing primed iii-cud bands and in IN munulamring
of expanded fuuiu rm pack-gang. CFC: break down mm and mmby dmuge the mile
lnyel in the smlosphere, causing incl-used receylion on ismh dr uni-viola Iiglrl wiih
mnxeqwent incense rim or skin cancer (mligunt mehmnu).
TCO 9s requiremem mes ihn wither CFC; um HCFCr my be used during flu mudfuuhuiug
of the prodncl or its pmklgingu
ml cmhin my
' Bin-mumulnive is defilwd ls midst-noes which minim-inn within living nrgnnilmxu
“ Lewd. Cadmium and Mercury Ire huvy men-is which Ire Bio-uwmnhliveu
XJ770 Monttor 7
Safety Precautions
Please read all oithe following inan'uctlnns before use
Follow all warnings and instructions marked on this product.
When cleaning this monitor, first unplug it from the wall outlet. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning
Do not use this product where water spills may occur.
Prevention from falling, do not place this product on an unstable surface.
To protect this monitor firom overheating, slots and openings on the back
and bottom of this unit (use for ventilation) should never be blocked.
Never be placed near a radiator or heating element.
Only operate this monitor from the power source indicated on the marking
label. If you are not sure of the type of power source available in your area,
consult your dealer or your local power company
This product is equipped with a 3-wire grounding type plug. For safety this
device is meant to be used with a grounding-type power outlet lt'you do not
have one, contact your electrician to replace your obsolete outlet Do not
rue a 340—2 prong adapter.
Do not allow anything to rest on the power cord or leave any cords hanging
where people frequently walk.
If an extension cord is used with this product, make sure that the total
amperage ratings do not exceed the extension cord‘s amperage or 10
amperest
Never puncture any objects through the walls of the monitor. High voltage
points could result in electric shock1 fire hazard or cause a short circuit.
Never attempt to service this product yourselfi Opening this unit may expose
you to dangerously high voltages. Refer all servicing to a qualified service
personnel.
Save this instruction manual for later use
Nau: Unplug this product and contact qualified service personnel if:
- The power cord or plug is damaged or frayed
- The product has been exposed to rain or water
- The product does not operate nomially when used properly
- Improper adjustmmts has been made
0 The product has been dropped or damaged
- The product does not achieve maximum performance
XJ770 Monitor 9
BBC Plug a. Play
With VESA°DDC l/ZB, when the monitor is powered up, it will automatically
notify aWindows" 95/98 host computer of its scanning frequencies, capabilities
and characteristics. Windows°95/9§ will automatically recognize the connection
of the monitor and select the appropriate display resolution.
TCO Compllant
The monitor has been designed to meet Swedish MPRII, TCO’92 and TCO’9S
guidelines for electromagnetic and static emissions.
EPA“ Energy Star0 and VESA’ Dlsplay Power
Management system
in the business world, tlte fastest growing use of electrical power is by
computer systems. The amount of electricity used by computers in businesses
and homes is phenomenal. A large portion of this electricity is wasted. The
Environmental Protection Agency (EPA) has conducted research showing that
most of the time PCs are powered up, they are not in use. The EPA promotes
the use of energy-efficient equipment because generating electricity causes
emissions that pollute the air.
This monitor is Energy Star compliant when used with a computer equipped
with VESA‘ Display Power Management System (DPMS).
_________—_—-————
Note: The XJ770 monitor has three power-saving modes. The power saving
operation is indicated by the LED power indicator on the front panel.
When the LED is green, your monitoris operating normally.
When the LED is orange, your monitor is in a power saving mode.
If the LED is orange and blinking, the monitor is in a sleep mode. Press
a keyboard key or move the mouse to return to normal usage.
If the LED is orange and blinking and you cannot return to normal usage
by using the mouse or keyboard, check your video signal connection.
C] When the monitor is not in use, save energy by turning off the monitor.
D DUE
xms Monitor I I
Operation
Make sure you carefully follow the “Safety“ and "setting Up Your Monitor"
instructions to install your monitor to your system before operating your
monitor. You may also want to familiarize yourself with the “Iii-rage
Adjustment” section of this manual before making any operational adjustments
to your operating monitort
ll Turn on the monitor by pressing the power button once. The power LED
lights and the monitor demagnetizes itself for about five seconds.
2. Power up the system
1 Once the system is completely powered up, the LED power indicator on
the monitor should be green. If not, check the connections.
4. Use On-Screen Display to adjust the controls needed to get the best
picture, Experiment with the display settings to choose the optimum
image size and position for you (refer to the Image Adjustment section of
this manual for Instructions)
A. LED Power indicator
B. Power button
Ci JAG Dial
__________———_
Note: If you nwd to disconnect the power cord from the wall socket or
monitor for any reason, he sure to wait at least 30 seconds afieryou turn off the
monitor before you unplug it This allows the monitor to discharge any static
elects-mg from the screen surfiaoe.
M796 Monitor 13
0 Deg-use fl - Removes any discoloration from the display image due to
electromagnetic field buildup. ll is not usmlly necessary to degauss your
monitor, unless it has been moved.
0 Reset IE] - While in a preset video mode, press the JAG dial to reset all
customer display setting to the factory default settings.
0 Advanced options - Activates the secondary menu that displays
options for rotation, how, parallelogram, comer, and moire.
- Rotation (D) - Adjusts the tilt of snvsmzw UPHUN
the display.
. Parallelognm D - Adjusts the
tilt of the display sides to the lefi or
fish‘-
. Bow (1 - Bends the sides of the
display in the same direction.
. Corner D - Squares aft" the
display comers.
/ n NAWGATE
o V-Moire E - Reduces the optical effect of wavy lines or ripples on the
display image in the horizontal direction These effects are usually more
noticeable on large gray areas or on black and white checkerboard
pattemsl
o H-Moire - Reduces the optical effect of wavy lines or ripples on the
display image in the vertical direction.
- Vertical Focus A - Adjust the vertical focus of the display colors.
- Horizontal Focus A - Adjusdsat the horizontal focus of the display
colors.
0 Color Manager Q - Activates the
secondary menu that display three
preset level options. Once color
temperature option is selected, rotate
and press the JAG to choose and adjust
the red, green or blue color levels, You
may also use recall to return to the
original factor settings.
count: MANAGER
nun! ssonx “film
I 925 __—1
0 lM‘ _:1
I last —':I
RECALL Gal-OR
EXIT
N: soKttz
(C), . slecv
v: 15.0":
b .ENTER
0 Language Manager @ - Activates the Language Manager suhmenu.
Allows you to choose the language for the menu screens.
XJ796 Monitor IS
Fln Assignment
The pin assignment ofthe connectors is lislzed below for professional use only.
Please do no( attempt to aller the connections yourself as filis may seriously
damage the monitor,
MAW
cmqmmhwn—
p—H—_.-.-n
math-c
Red Video input
Green video input
Blue vich input
Cvmund
Ground (DDC)
Red video ground
Green video ground
Blue video ground
No connection
Grmmd
Ground
DDC SDA 1 5
Horizontal sync/Composite sync.
Vertical syncl ' ‘°
DDC SCL
XJ796 Monitor I 7
Canadlan Users:
This diginl apparatus dncsnot cxceedthe Class a digital limits for
redic noise emissions fi’om digital awn-ta! as set out in the radia
interference regulations of Industry Clnada,
European Users:
This Information Technology Equipmenthas been nested and found to
mmply with llie following Eurepean directives:
[1] EMC Directive 89/336/EEC amending directive 91/31/EEC 95/263/EE A 93/611/
BBC as per
-EN 50031-1: 1992 according to
EN 55022: 1994+A1:l995+A2+I997/CISPR 2211993+A1+AZIASINZS
35481995. Class 8
EN 61000-3-2: 1995, Class A
EN 61000-3-3: 1995
-EN50082-l: 1992/1994 according to
EN61000-4-2: 1995 or IEC 801-2: 1987
ENV 50140: 1994 vrIEC 8013: 1984
EN 61000—4-4: 1995 or IEC 801-4: 1988
[ii] Low Voltage Directive (Safety) 73/23/EEC as per EN 60950: 1992
Japanese Useis:
This eqm‘pment is in the Class 2 canegury (Information Technology
Equipment to be used in a residential area or an adjacent area therein)
and conforms m the standards set by the Voluntary Central Council for Interference by
Infonnaiicn Technology Equipment aimed ll preventing radio interference in such
residential areal
When used near a radio nr TV receiver. it may become the cause of radio interference.
Read instructions for correct handling.
militant
:mfillt manual“: 3 nflflifiIMVWWII1235
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2001:06:21 20:48:28
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:06:21 20:48:29-04:00
Page Count                      : 20

EXIF Metadata provided by EXIF.tools