MAIXIN GROUP MAPANWATCH Smart Watch Phone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2973536
Application ID	I5cg6SN2h5S31ErkseCfRQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	61.56kB (769495 bits)
Date Submitted	2016-04-27 00:00:00
Date Available	2016-04-27 00:00:00
Creation Date	2017-12-03 14:41:25
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-03 14:41:25
Document Title	Microsoft Word - User manual for MaPan Smart watch MW09
Document Creator	Microsoft Word - User manual for MaPan Smart watch MW09
Document Author:	Administrator

Warning:
User manual for MW09 Series
Any Changes for modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference and (2) this
devoice must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a class B
digital device,pursuant to part 15 of the FCC Rules.This limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
conmmunications.
However, there is no guarantee that interference will not occur a particular installation.
If this equipment does cause harmful interference to radio or television reception,which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
SAR testes are conducted using standard operating positions accepted by the FCC
with the phone transmitting at its highest certified power level in all tested frequency
bands,although the SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the maximum value.Before
a new model phone is a available for sale to the public,it must be tested and certified to
FCC that it does not exceed the exposure limit established by the FCC, tests for each
phone are performed in positions and locations are required by the FCC.
For body worn operation, this model phone has been tested and meets the FCC RF
exposure guidelines when used with an accessory designated for this product or
when used with an accessory that contains no metal.
Non-compliance with the above restrictions may result in vionlation of RF exposure
guidelines.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .This equipment should be installed and operated with
minimum distance 10mm between the radiator & the mouth.
Install APK
Install the Bluetooth Notification(More than 4.3)
Scan the QR code build in the MaPan smartwatch MW09 through the QRScan
function of android market http://www.maixinchina.net/software/apk.html
to download and install the Fundo wear and Baidu voice . After successful
installation, the UI is shown as the figure:
FunDoWear Android Version
FunDoWear Iphone Version
FunDoWear Android Version
Android
Iphone
Baidu Voice
For
I=OS Install APK (4S above)
Install the Bluetooth Notification
,8.1.2 system support two-dimensional code scanning.
By App Store
Search Fundo wear, Download and install this APP. After successful installation,
the UI is shown as the figure:
Bluetooth connection
1.Turn on the Bluetooth switch on the smart watch MW09 series.
2.Turn on the Bluetooth switch on the phone, and click the “Fundo Wear” to
search and add the Bluetooth device.
3.Find the MaPan smart watch name( MW09 as sample) and match with it .After
successful match, the Bluetooth icon on the status bar of the MaPan smart watch
will displayed as green .The Bluetooth menu interface will display that a
Bluetooth device is successfully connected.
4.Click”Search the Bluetooth” and find the MaPan smart watch name( MW09 as
sample) and match with it. After successful match, this menu interface will display
that two Bluetooth device are successfully connected.
5.The Bluetooth icon on the status bar of the MaPan smart watch will displayed
as gradient .Now the MaPan smart watch and the phone can be searchable with
each other.
The Built-in Function on the watch
1.Pedometer : Click into the Option menu on the Pedometer, set personal details,
wear the MaPan smart watch (MaPan smart watch MW09 as sample) and click
Start. Swing your arms regularly while walking , and the pedometer will count the
steps and calculate the calories burned based on the total step counts.
2.Sedentary Reminder: Click into the Sedentary Reminder memu, and set the
sedentary reminder time period after which it will ring and vibrate to alarm you to
stand up and walk ,as shown in the figure:
3.Sleep Monitoring : Go to the Sleep Monitoring menu, click Start and wear the
MaPan smart watch. The user’s sleep quality will be monitored based on the
vibration degree and sleep time elapsed.
4.Knob function
Dial interface rotary knob to switch between different styles of dial；
In smart styles interface, rotate
knob, UI icon will zoom in and
out.
In functional menu , short press
knob into next.
5.Support for making phone calls and SMS function as mobile phone.
6.Support watch camera function
Synchronization
Time Synchronization
If the Synchronous Switch on the MaPan smart watch is turned on by default
(Settings – Clock – Time Synchronization), then after success connection with
the Bluetooth on the phone, the time and date on the watch will successfully
synchronize with the current time and date on the phone and update accordingly.
SMS
1.If the Reminder on the phone is turned on(Generally in the settings menu,
depending on the different design of the phone with different platform), when the
phone receives SMS, the status bar on the phone will display the reminder
relating to the SMS and now the MaPan smart watch will also receives the
reminder. All the information (except the facial sign) will display normally by
clicking View.
2.Click into the SMS menu on the MaPan smart watch to preview all the
information in the inbox. You can select any SMS to view , and make quick reply
and call to the sender after viewing.
Dailing
Dial on the MaPan smart watch or the phone, then the watch will immediately
synchronize with the phone.
Call
During the Bluetooth call, the interfaces of the MaPan smart watch and the phone
will immediately synchronize with each other. While talking through the MaPan
smart watch, you can adjust the volume, display the dial screen, mute , unmute ,
and end the call etc.
Call Record
Click into the call log to view all the call records on the SIM card of your phone.
Select and click any number to make Bluetooth call.
Contacts
Click into the phonebook to view all the contact number on the phone.
Select and click any number to view and make Bluetooth call.(You can choose to
synchronize with your phone for instant synchronization)
Bluetooth Music
Go to the Music menu and click Play to successfully play the music on your
phone, thus controlling the music player.
Click – to reduce the volume, Click + to increase the volume;
to play the previous song, Click
Click || to pause or Resume, Click
play the next song.
to
Remote Camera (I=OS does not support)
When the phone is unlocked, you can click Remote Camera on the MaPan smart
watch to take pictures.
The Default Email Box, Twitter, Facebook, Skype, Outlook, Mailbox , etc. on
the system of the phone
If the Message Reminder on the phone is turned on (Gernerally in the Settering
menu, depending on the different design of the phone with different platform) ,
when there is a reminder on the status bar of the phone , there will also be a
synchronous reminder on the MaPan smart watch. The corresponding interfaces
will appear when making calls through Internet.
My Applications
After successfully connecting the MaPan smart watch with the phone, click My
Applications in the Fundo wear menu to install the weather and the clock to the
watch.
Common problem points out
In the use of mobile phones in the following common problems, can be resolved
in accordance with the following
1.Synchronous SMS
SMS sync support Android phones, Apple phone does not support
2.MaPan smart watch can t boot ’
5 hours after complete power consumption, please charge the MaPan smart
watch,5 minutes later, press the power on /off button for 10 seconds to reactivate
the battery.
3.Standby time of MaPan smart watch is very short
Battery is not fully charged. Please make sure it is fully charger. If connected with
phone, the signal of location is poor, it will affect the use of watch.
4. Bluetooth Disconnect
Bluetooth signal is not good, it will automatically disconnect. And if alarm function
is on, it will be repeatedly alarmed when disconnection.
5. There is no Bluetooth authorization on smartphone
It can’t trust the device. Bluetooth repeatedly disconnects and pairs. That is
because the security of smartphone doesn’t trust the MaPan smart watch. Please
set it in Setting-Security-trust Bluetooth setting. ( different phones have different
setting.)
6. Voice quality is not good
Your MaPan smart watch is too far away from your phone. Your phone is in a bad
blue signal, change the location of a call.
7. Of the dynamic can’t be synchronized , because the background is not logged,
the movement of data can’t be stored in the background Store, please register
and log in.
8.Voice function
Apple voice features, for the use of the IPHONE machine Siri. Connect
to Bluetooth, click on the menu icon, directly to wake up the voice of the machine,
can operate voice dialing , etc.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Administrator
Create Date                     : 2016:04:18 13:26:10Z
Modify Date                     : 2016:04:27 18:03:23-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - User manual for MaPan Smart watch MW09
Creator Tool                    : Microsoft Word - User manual for MaPan Smart watch MW09
Metadata Date                   : 2016:04:27 18:03:23-07:00
Producer                        : doPDF   Ver 6.0 Build 259 (Windows Server 2003  x32)
Document ID                     : uuid:a10cd815-ce4b-46b1-aae4-6108a4de6c52
Instance ID                     : uuid:1aa7e374-ec8f-48e2-85d9-5504bd237835
Page Layout                     : OneColumn
Page Mode                       : UseNone
Page Count                      : 9

EXIF Metadata provided by EXIF.tools