Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3228229 |
| Application ID | HC/55c+CUWZ4f/8AbmEKlw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 297.14kB (3714311 bits) |
| Date Submitted | 2016-12-14 00:00:00 |
| Date Available | 2016-12-14 00:00:00 |
| Creation Date | 2016-11-12 01:25:47 |
| Producing Software | 3-Heights(TM) PDF Optimization Shell 4.7.19.0 (http://www.pdf-tools.com) |
| Document Lastmod | 2016-11-14 06:01:22 |
| Document Title | Users Manual |
| Document Creator | CorelDRAW |
| Document Author: | Administrator |
4 Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: âReorient or relocate the receiving antenna. âIncrease the separation between the equipment and receiver. âConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. SAR tests are conducted using standard operating positions accepted by the FCC with the tablet transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the tablet while operating can be well below the maximum value, in general, the closer you are to a wireless base station antenna, the lower the power output. Before a new model tablet is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, Tests for each phone are performed in positions and locations (e.g. at the ear and worn on the body)as required by the FCC. For body worn operation, this model tablet has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that Contains no metal and that positions the ha ndset a minimum of 0 mm from the body. Non-compliance with the above restrictions may re sult in violation of RF exposure guidelines.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2016:11:12 01:25:47+08:00 Author : Administrator Creator : CorelDRAW Title : Astro+Phablet+9+说明书封面.cdr Modify Date : 2016:11:14 06:01:22Z Producer : 3-Heights(TM) PDF Optimization Shell 4.7.19.0 (http://www.pdf-tools.com) Page Count : 8EXIF Metadata provided by EXIF.tools