MD Consumer Electric MC-C13S501-1 Induction Cooker User Manual CEB4C3FCC3FBB5C42D31

Guangdong MD Consumer Electric Manufacturing Co., Ltd Induction Cooker CEB4C3FCC3FBB5C42D31

Contents

User manual (model MC-ESH13C-1)

Model:MC-ESH13C-1Thank you for purchasing the Midea induction hotplate. Please read this instructionmanual carefully before using and keep it cautiously for future reference.Instruction Manual of Midea Induction hotplateCatalogue.Safety Notice.Product Introduction.Product Sketch Map.Performance Parameters.Operation Instructions.Applicable Pots.Methods of Cleaning and Maintenance.Troubleshooting Guide.Special Declaration.Measures for Emergency............................................................. 1.................................................. 3................................................... 3............................................ 3............................................... 3.............…......................................... 5 ..................... 6.............................................. 6.................................................... 7............................................ 7
Other voltages except 110-120V are Never change the structure of the induction hotplate or replace the part.Never use the induction hotplate in high humidity or precarious environment.Don’t put the empty pot on the ceramic plate. Put the pot in the center of the heating area.Don’t use the induction hotplate near the source of fireDon’t put an inapplicable pot on the inporter uction hotplate.Not to insert foreign matters to block the air vent or air entry as to avoid danger.Please don’t let child operate alone, inorder to prevent any dangers, such asscalding. Don’t wash hotplate directly with water so as to avoid danger.ĉ.Safety NoticeForbiddenForbiddenForbiddenForbidden ForbiddenForbiddenNoticeForbid disassemblyDon’t place the hotplate on the heat-labile or iron table.Indoor use only.Metallic objects such as knives, forks,spoons and lids should not be placed onThe hotplate should be placed in the ventilated environment and at least 10cm away from the wall.People with heart pacemaker should consult professional doctor before using the product.The surface of the hotplate is still hot after use, don’t touch it to avoid burn.Never place the hotplate where it can be bespattered by water or oil.ForbiddenForbiddenForbiddenForbidden NoticeForbiddenNoticeNotice2If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.Cue for "probability of causing death or harm for person"Cue for "probability of causing physical damage or article damage"Cue for "warning or notice"Cue for "forbidden operation"Cue for "something must be complied with the instruction"Warning NoticeDisassembly and refit are forbidden.Please disconnect power before cleaning. Don’t unplug the hotplate with the waterish hand.Never use the hotplate when the power cord is damaged or the plug become inapplicable.Don’t use the product for business.Never damage or process or drag the power cord or press it with heavy. During operation, please pay attention to the hotplate. If you won’t use the hotplate for a long time, please unplug the hotplate.Never use the hotplate around flammable gas.Never use the induction hotplate in high humidity environment.Use an individual socket with more than Don’t heat sealed food before opening the cover.NoticeWarningĉ.Safety Notice1 DISPOSAL˖Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.Please read the following notice cautiously before using the induction hotplate. When there are some danger, distinguish the degree of the damage with the following sketch map˖If the power cord of the appliance is damaged, it must be replaced by the manufacturer, its service agent or similar qualified person.Other voltages except 110-120V are 13 A capacity. the hotplate since they can get hot.
5. Childp4. PoweW 355x302x66 2.98Model Weight(kg)Appearance dimensionmmApplied Voltage/frequencyRated power(w). Operation Instructions. Operation InstructionsPerformance ParametersIII. Product Sketch Map1. Put the pot on the hotplate. Put the pot which has food in the center of the ceramic plate. Make sure the air vent and the air entry are not blocked and there are not metallic objects around the Air ventPower cordCeramic plateAir entry2. Plug in After the power supply is connected, the buzzer sounds, indicating that the hotplate is in a state of standby.3. Turn on When the “ON/STANDBY” button is pressed, the buzzer sounds. The “ON/STANDBY” indicator lamp lights up. If you don’t press any key within 1 minute, the induction hotplate will shut down automatically.r mode roof Lock When the hotplate is in working state, to prevent children from operation, you can activate the childproof lock by pressing the childproof lock button, the buzzer will sound at the same time. In the childproof lock state, “Childproof Lock” button and “ON/STANDBY” button can be operated, other buttons are non effective. YPress the “Function” button, choose “Power”, the buzzer sounds, the “ON/STANDBY ” and the “Power” indicator lamp light up, the hotplate entering the heating working state.After power on, press the "+” or “-” button, the hotplate can enter the heating working state the buzzer sounds, the “ON/STANDBY” and the “Power” or“Temp” indicator lamp light up.When in heating working mode, the default power level shall be level 4, you can make a regulation by pressing the “+” or “-“ key.4The induction hotplate is able to meet various kinds of cuisine demands by electromagnetic heating, having high thermal efficiency, is safe and reliable, easy to clean. Product Introduction31300110V-120V~50/60Hzou can deactivate the childproof lock by holding the childproof lock button. The buzzer will sound.MC-ESH13C-1
7. Shut down6 . . Operation Instructions Applicable PotsApplicable Pots. Methods for Cleanness and MaintenanceTroubleshooting Guide1. Please unplug the hotplate before cleaning, after the ceramic plate isn’t hot, you can start cleaning.2. The dust around the air entry and air vent be cleaned lightly with flexible dry cloth or a flexible brush or cleaner.3. The slight dirt on the ceramic panel: please clean with soft wet cloth.4. The oily dirt: clean with soft wet cloth dipped in little toothpaste or neutral detergent and clean with soft wet cloth until no residue exists.1. Power cord replacement If the power cord is damaged, please contact the relevant after-sale service agent, who will dispatch personnel for the repair. For the purpose of your safety, please 2. Trouble shootingNote:1. Please use the pots sold along with the hotplate. It is better not to use other alternatives especially pressure vessel) so as to avoid any unfavorable influence on the operational performance. If using other pots, please observe the following conditions: Requirement for pot materials: containing magnetic inducting materials Shape requirement: plat bottom, with the diameter more than 12 cm and less than 26 cm.2. After the first use, some white spots would appear at the bottom of the pot. This is normal. Please pour some vinegar into the pot, heat it at about 60-80OC, then wipe the spots away with brush. 3. Inapplicable pots material: glass, ceramic, aluminium, copper and other non magnetic material.4If the pot is moved away, the induction hotplate will stop heating immediately. After the buzzer sounds about 1minute, it will go into standby mode automatically.Default timer hoursLevel 123422222526Timer In working state, after the "Timer" key is pressed, the buzzer gives out a sound, the nixie tube flashes and displays the “0”, indicating that the induction hotplate enters timing working state. Each time the "+" or "-" is pressed, the time can increase or decrease by 1 minute. If it is held, the time will increase or decrease minutes quickly with 10 minutes as an increment. In the timing setting state, press the timer button again will cancel the timing. After timing period is set, the time stabilizes after the nixie tube flashes for 5 seconds to confirm the period to be effective. If the timer is 0, the timer is noneffective. In the timing working state, hold the timer button to cancel the timing. When the working time reaches, the hotplate will shut down automatically. Automatic Shutdown Protection: The induction hotplate will shut down when the hotplate default timer of program is reached unless the user sets the timer himself. The default timer of each level are as follow: After using, please press the “ON/STANDBY” button, the induction hotplate will stop heating. The fan will run for a while to cool the induction hotplate down.Iron plateEnamel cookingutensilIron kettleEnamel stainlesssteel kettleIron panStainless steel potIron oil frying pan 65 never replace it by yourself.
Special DeclarationTroubleshooting GuideAll the contents in this material have been subjected to careful check. For any mistakes and omissions in printing or misunderstanding of the contents, the company keeps the right to interpretation.Addition: any technical improvements shall be placed in the revised manual without notice; for any changes in appearance and color, those of the actual product shall prevail.Measures for Emergency1. During using, If there are some abnormal cases, please unplug immediately and disconnect power. 2. For any failure of the product, please contact the special maintenance department or the customer service center.After power is supplied, the “ON/STANDBY” indicator lamp fails to light up. Whether the plug is inserted tightly. Whether the switch, socket, fuse and power cord are in good condition. Whether the pot materials are acceptable For other reasons, please contact the special maintenance department. Whether the ambient temperature is too high Whether the air entry or the air vent is blocked Whether the timing period reaches The system protection functions, and conduct energizing test Wait a moment and press the “ON/STANDBY” button when the temperature of the hotplate becomes normal, the induction hotplate will operate as usual. Turn off the hotplate, when the voltage becomes normal, and then turn on the hotplate, it will operate as usual.The “ON/STANDBY” indicator lamp lights up, but heating does not start.Heating stops suddenly during operation.Code of failureE3 E6E7 E8 Please contact the special maintenance department.E1 E2 E4E5 Eb ECesuac elbissoPmelborP7Warning1. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for Class B ISM equipment, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:2. Reorient or relocate the receiving antenna. 3. Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.4. Consult the dealer or an experienced radio TV technician for help.

Navigation menu