MD Consumer Electric MC-C13S501-1 Induction Cooker User Manual CEB4C3FCC3FBB5C42D31

Guangdong MD Consumer Electric Manufacturing Co., Ltd Induction Cooker CEB4C3FCC3FBB5C42D31

Contents

User manual (model MC-ESH13C-1)

Model:MC-ESH13C-1
Thank you for purchasing the Midea induction hotplate. Please read this instruction
manual carefully before using and keep it cautiously for future reference.
I
nstruction Manual of Midea Induction hotplate
Catalogue
.Safety Notice
.Product Introduction
.Product Sketch Map
.Performance Parameters
.Operation Instructions
.Applicable Pots
.Methods of Cleaning and Maintenance
.Troubleshooting Guide
.Special Declaration
.Measures for Emergency
............................................................. 1
.................................................. 3
................................................... 3
............................................ 3
............................................... 3
.............…......................................... 5
..................... 6
.............................................. 6
.................................................... 7
............................................ 7
Other voltages except 110-120V are
Never change the structure of the
induction hotplate or replace the part.
Never use the induction hotplate in high
humidity or precarious environment.
Don’t put the empty pot on the ceramic
plate. Put the pot in the center of the
heating area.
Don’t use the induction hotplate near the
source of fire
Don’t put an inapplicable pot on the
inporter uction hotplate.
Not to insert foreign matters to block the
air vent or air entry as to avoid danger.
Please don’t let child operate alone, in
order to prevent any dangers, such as
scalding.
Don’t wash hotplate directly with water
so as to avoid danger.
ĉ.Safety Notice
Forbidden
Forbidden
Forbidden
Forbidden Forbidden
Forbidden
Notice
Forbid disassembly
Don’t place the hotplate on the heat-labile
or iron table.
Indoor use only.
Metallic objects such as knives, forks,
spoons and lids should not be placed on
The hotplate should be placed in the
ventilated environment and at least
10cm away from the wall.
People with heart pacemaker should
consult professional doctor before using
the product.
The surface of the hotplate is still hot
after use, don’t touch it to avoid burn.
Never place the hotplate where it can be
bespattered by water or oil.
ForbiddenForbidden
Forbidden
Forbidden Notice
Forbidden
Notice
Notice
2
If the surface is cracked, switch off
the appliance to avoid the possibility
of electric shock.
Cue for "probability of causing death or harm for person"
Cue for "probability of causing physical damage or article damage"
Cue for "warning or notice"
Cue for "forbidden operation"
Cue for "something must be complied with the instruction"
Warning
Notice
Disassembly and refit are forbidden.
Please disconnect power before
cleaning. Don’t unplug the hotplate
with the waterish hand.
Never use the hotplate when the power
cord is damaged or the plug become
inapplicable.
Don’t use the product for business.
Never damage or process or drag the
power cord or press it with heavy.
During operation, please pay attention
to the hotplate. If you won’t use the
hotplate for a long time, please unplug
the hotplate.
Never use the hotplate around flammable
gas.
Never use the induction hotplate in high
humidity environment.
Use an individual socket with more than
Don’t heat sealed food before opening
the cover.
Notice
Warning
ĉ.Safety Notice
1
DISPOSAL˖Do not dispose this product as unsorted municipal waste.
Collection of such waste separately for special treatment is necessary.
Please read the following notice cautiously before using the induction hotplate.
When there are some danger, distinguish the degree of the damage with the
following sketch map˖
If the power cord of the appliance is
damaged, it must be replaced by the
manufacturer, its service agent or
similar qualified person.
Other voltages except 110-120V are
13 A capacity. the hotplate since they can get hot.
5. Childp
4. Powe
W 355x302x66 2.98
Model Weight(kg)
Appearance
dimension
mm
Applied
Voltage/frequency
Rated
power(w)
. Operation Instructions
. Operation Instructions
Performance Parameters
III. Product Sketch Map
1. Put the pot on the hotplate.
Put the pot which has food in the center of the ceramic plate.
Make sure the air vent and the air entry are not blocked and there are not metallic
objects around the
Air vent
Power cord
Ceramic plate
Air entry
2. Plug in
After the power supply is connected, the buzzer sounds,
indicating that the hotplate is in a state of standby.
3. Turn on
When the “ON/STANDBY” button is pressed, the buzzer sounds. The “ON/STANDBY”
indicator lamp lights up.
If you don’t press any key within 1 minute, the induction hotplate will shut down
automatically.
r mode
roof Lock
When the hotplate is in working state, to prevent children from operation, you can
activate the childproof lock by pressing the childproof lock button, the buzzer will
sound at the same time. In the childproof lock state, “Childproof Lock” button and
“ON/STANDBY” button can be operated, other buttons are non effective.
Y
Press
the
“Function”
button,
choose
“Power”,
the
buzzer
sounds,
the
“
ON/STANDBY ”
and
the
“Power”
indicator
lamp
light
up,
the
hotplate
entering
the
heating
working
state.
After
power
on,
press
the
"+”
or
“-”
button,
the
hotplate
can
enter
the
heating
working
state the
buzzer
sounds,
the
“ON/STANDBY”
and
the
“Power” or“Temp”
indicator lamp light up.
When
in
heating
working
mode,
the
default
power
level
shall
be
level
4,
you
can
make a regulation by pressing the “+” or “-“ key.
4
The induction hotplate is able to meet various kinds of cuisine demands by
electromagnetic heating, having high thermal efficiency, is safe and reliable,
easy to clean.
Product Introduction
3
1300
110V-120V~50/60Hz
ou can deactivate the childproof lock by holding the childproof lock button.
The buzzer will sound.
MC-ESH13C-1
7. Shut down
6 .
. Operation Instructions Applicable Pots
Applicable Pots
. Methods for Cleanness and Maintenance
Troubleshooting Guide
1. Please unplug the hotplate before cleaning, after the ceramic plate isn’t hot, you can
start cleaning.
2. The dust around the air entry and air vent be cleaned lightly with flexible dry
cloth or a flexible brush or cleaner.
3. The slight dirt on the ceramic panel: please clean with soft wet cloth.
4. The oily dirt: clean with soft wet cloth dipped in little toothpaste or neutral
detergent and clean with soft wet cloth until no residue exists.
1. Power cord replacement
If the power cord is damaged, please contact the relevant after-sale service agent,
who will dispatch personnel for the repair. For the purpose of your safety, please
2. Trouble shooting
Note:
1. Please use the pots sold along with the hotplate. It is better not to use other
alternatives especially pressure vessel) so as to avoid any unfavorable influence on
the operational performance. If using other pots, please observe the following
conditions:
Requirement for pot materials: containing magnetic inducting materials
Shape requirement: plat bottom, with the diameter more than 12 cm and less
than 26 cm.
2. After the first use, some white spots would appear at the bottom of the pot. This is
normal. Please pour some vinegar into the pot, heat it at about 60-80OC, then wipe
the spots away with brush.
3. Inapplicable pots material: glass, ceramic, aluminium, copper and other non
magnetic material.
4If the pot is moved away, the induction hotplate will stop heating immediately.
After the buzzer sounds about 1minute, it will go into standby mode automatically.
Default timer hours
Level 1234
22222
5
2
6
Timer
In working state, after the "Timer" key is pressed, the buzzer gives out a
sound, the nixie tube flashes and displays the “0”, indicating that the induction
hotplate enters timing working state. Each time the "+" or "-" is pressed, the time can
increase or decrease by 1 minute. If it is held, the time will increase or decrease
minutes quickly with 10 minutes as an increment.
In the timing setting state, press the timer button again will cancel the timing. After
timing period is set, the time stabilizes after the nixie tube flashes for 5 seconds
to confirm the period to be effective. If the timer is 0, the timer is noneffective.
In the timing working state, hold the timer button to cancel the timing.
When the working time reaches, the hotplate will shut down automatically.
Automatic Shutdown Protection:
The induction hotplate will shut down when the hotplate default timer of program is
reached unless the user sets the timer himself.
The default timer of each level are as follow:
After using, please press the “ON/STANDBY” button, the induction hotplate will stop
heating.
The fan will run for a while to cool the induction hotplate down.
Iron plateEnamel cooking
utensil
Iron kettle
Enamel stainless
steel kettle
Iron panStainless steel potIron oil frying pan
65
never replace it by yourself.
Special Declaration
Troubleshooting Guide
All the contents in this material have been subjected to careful check. For any
mistakes and omissions in printing or misunderstanding of the contents, the
company keeps the right to interpretation.
Addition: any technical improvements shall be placed in the revised manual
without notice; for any changes in appearance and color, those of the actual
product shall prevail.
Measures for Emergency
1. During using, If there are some abnormal cases, please unplug immediately
and disconnect power.
2. For any failure of the product, please contact the special maintenance
department or the customer service center.
After power is supplied, the
“ON/STANDBY” indicator lamp
fails to light up.
Whether the plug is inserted tightly.
Whether the switch, socket, fuse and power cord
are in good condition.
Whether the pot materials are acceptable
For other reasons, please contact the special
maintenance department.
Whether the ambient temperature is too high
Whether the air entry or the air vent is blocked
Whether the timing period reaches
The system protection functions, and conduct
energizing test
Wait a moment and press the “ON/STANDBY” button
when the temperature of the hotplate becomes normal,
the induction hotplate will operate as usual.
Turn off the hotplate, when the voltage becomes
normal, and then turn on the hotplate, it will operate
as usual.
The “ON/STANDBY” indicator
lamp lights up, but heating
does not start.
Heating stops suddenly
during operation.
Code of failure
E3 E6
E7 E8
Please contact the special maintenance department.
E1 E2 E4
E5 Eb EC
esuac elbissoPmelborP
7
Warning
1. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for
Class B ISM equipment, pursuant to Part 18 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
2. Reorient or relocate the receiving antenna.
3. Increase the separation between the equipment and receiver. - Connect the
equipment into an outlet on a circuit different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio TV technician for help.

Navigation menu