MD Consumer Electric MC-SKW1501 Induction Cooker User Manual

Guangdong MD Consumer Electric Manufacturing Co., Ltd Induction Cooker Users Manual

User Manual 1

Model: MC-ESH13KManual of Multi-function lnduction CookerThank you for purchasiong the Midea induction cooker. Please this instuction manual carefullybefore using and keep it cautiously in order to refer to in future
TABLE OF CONTENTSIMPORTANT SAFEGUARDS .................................................................. 1AD DITIONAL SAFEGUARS ................................................................ 2Product  Introduction  ............................................................................... 3Designations  of  parts ............................................................................. 3Performance  Parameters  .......................................................................  3Operation  Instructions  ............................................................................ 3Suitable cookware  .................................................................................. 5Cleaning and Maintenance ..................................................................... 5Trouble shooting ..................................................................................... 6Special Declaration ................................................................................. 6 IMPORTANT SAFEGUARDS1. Read all instructions before use the induction cooker.2. Do not touch hot surfaces. Use handles or knobs.3. To protect against electrical shock do not immerse cord, plugs in water or     other liquid.4. Close supervision is necessary when any appliance is used by or near children.5. Unplug from outlet when not in use and before cleaning. Allow to cool before    putting on or taking off parts.6. Do not operate any appliance with a damaged cord or plug or after the     appliance malfunctions or has been damaged in any manner. Return     appliance to the nearest authorized service facility for examination, repair,     or adjustment.7. The use of accessory attachments not recommended by the appliance     manufacturer may cause injuries8. Do not use outdoors. 9. Do not let cord hang over edge of table or counter, or touch hot surfaces.10. Do not place on or near a hot gas or electric burner, or in a heated oven.11. Extreme caution must be used when moving an applian ce containing hot oil       or other hot liquids.12. Do not use appliance for other than intended use. When using electrical appliances, basic safety precautions  should always be followed including the following:1
13. WARNING  To prevent electric shock, unplug before cleaning.14. This appliance has polarized plug (one blade is wider than the other). To       reduce the risk of electric shock, this plug is intended to fit into a polarized       outlet only one way. If the plug does not fit fully into the outlet, reverse the       plug. If it still does not fit, contact a qualified electrician, Do not attempt to       modify the plug in any way. 15. Do Not cook on broken-Top If cook-top should break, cleaning solution and       spillovers may penetrate the broken cook-top and create a risk electric shock.16. Metallic objects such as knives, forks, spoons and lids should not be placed       on the plate to avoid this vessel to heat. 17. Any other servicing should be performed by an authorized services representative.18. If the surface is cracked, switch off the appliance to avoid the possibility of      electric shock.19. The appliances are not intended to be operated by means of an external timer      or separate remote-control system.20. The appliance is not to be used by children or persons with reduced physical,       sensory or mental capabilities, or lack of experience and knowledge, unless       they have been given supervision or instruction concerning use of the appliance       by a person responsible for their safety; 21. Children should be supervised to ensure that they do not play with the appliance.Save These Instructions.1. A short power-supply cord  should be used to reduce the risk resulting from becoming entangled in or tripping over a longer cord.2.  Longer extension cords are available and may be used if care is exercised in their use.3. If a longer extension cord is used:   1) The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance;    2) The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.AD DITIONAL SAFEGUARDSDO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY DAMAGE, OR IF APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.2
Product IntroductionMidea MC-ESH13K series multi-functional induction cookers, with micro-computerized control and complete functions, are able to meet various kinds of cuisine demands by electromagnetic heating, really the optimalchoice.Performance ParametersModel Applied voltage/frequencyRated powerDimension(mm)Weight(kg)MC-ESH13K 110-120V~  60Hz 1300W 310*310*65 2.55Designations of partsOperation Instructions   1. Put the pot on the hotplate. Put the pot in the center of the ceramic plate. Please note that it is in the midpoint.Affirm the air vent and air entry without any jam, without any metallic objects all around.Supply cordCeramic plateadjust the firepowerby revolve the knobAir entryAirvent3
2. Plug in    After the power supply is connected, the buzzer sounds, The LED indicator     lamp flickers and display " ", indicating that the unit is in a state of power off.-3. Power on:    Revolve the control knob switch to right, the buzzer sounds. The LED     display“0”, indicating that the unit is in a state of standby.4. Heating:    Revolve the control knob switch to right, when the unit is in a state of     standby, the buzzer sounds , the LED display hyper-0, the induction cooker    start the heating.   You can adjust the power level by revolve the control knob switch to left     or right.   The LED display 0-6 shows the level of heating.    When the unit is in the heating state, revolve the control knob switch to left     until the LED display “0”, the unit will exit the heating mode and return the    state of standby.5. Timer:The have 2 kinds of timer: manual and default.When the unit is heating, if you set the time without use manual or set the time for 0, the unit can use default timer.When the unit is heating, press the “+” or “-“ key can enter the “Timer” mode, the original timer is 30mins, you can increase or decrease the time 1 minute by pressing the “+” or “-“ key once, If you hold “+” or “-“ key ,the time can increase or decrease 10 minutes. The range of timer: 0-99 minutes.Under the timer state, if you have not press the “+” or “-“ key within 5 seconds, the unit will set the time count down.Under the timer state, you can cancel the time function by set the time to 0.Under the timer state, if you wish to re-set the time, you can press the “+” or “-“ key to enter the timer state.The induction cooker will turn-off automatically when the timer runs out. The buzzer sounds.6. Shut downAfter using, revolve the control knob switch to left until the firepower display"-", the unit will stop heating.Heating levelDefalut time forturn off(hours)1 2 3 4562 2 2 2224
Suitable cookwareIron oil fryingpanStainless steel por Iron pan Iron kettleIron pIateEnamel cooking utensilEnamel stainless steel kettle 1. Please use the pots sold along with the unit by recommend. It is better      not to use other alternatives so as to avoid any unfavorable influence      on the operational performance. If using other pots, please observe the      following conditions:Requirement for pot materials: containing magnetic inducting materials;Shape requirement: plat bottom, with the diameter within the range of 12 cm and 18 cm.2. 4. After first use, some white spots would appear at the bottom of the pot.     This is normal. Please pour some vinegar into the pot, heat it at about     60-80℃, then wipe the spots away with brush.3. The induction cooker can identify mostly pot except the non-magnetism     steels.If the have no cookerware or the unsuitability cookerware. The buzzer     sounds about 10 seconds, it will turn off.Cleaning and MaintenancePlease pull out the plug and wait the remain heat is cool before maintenance.1. Ceramic panel and control panel   Slight stains: Please wipe off plate with soft moistened cloth .  Tough stains: Please clean with soft moistened cloth dipped in little   toothpaste or neutral liquid cleaner and clean with soft moistened cloth  until no residue exists.  During the cleaning, never clean the cooker surface with a rigid brush.2. The induction cooker body shall be cleaned lightly with soft dry cloth.   The dust around the air entry and air outlet can be cleaned with a    flexible brush or cleaner.5
Trouble shooting 1. Power cord replacement    If the supply cord is damaged, it must be repaired by the manufacturer or     authorized service agent.2. Trouble shooting6
Special DeclarationWarning:  Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Note:  This equipment has been tested and found to comply with the limits for Class B ISM equipment, pursuant to Part 18 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -  Reorient or relocate the receiving antenna. -  Increase the separation between the equipment and receiver. -  Connect the equipment into an outlet on a circuit different from that to which the receiver is       connected. -  Consult the dealer or an experienced radio TV technician for help.7

Navigation menu