MD Consumer Electric MC-STW1501 Induction Cooker User Manual
Guangdong MD Consumer Electric Manufacturing Co., Ltd Induction Cooker Users Manual
TAPMC STW1501 User manual
Manual of Multi-function lnduction Cooker Model: MC-STW1501 Thank you for purchasiong the Midea induction cooker. Please this instuction manual carefullybefore using and keep it cautiously in order to refer to in future TABLE OF CONTENTS IMPORTANT SAFEGUARDS .................................................................. 1 AD DITIONAL SAFEGUARS ................................................................ 2 Product Introduction ............................................................................... 3 Designations of parts ............................................................................. 3 Performance Parameters ....................................................................... 3 Operation Instructions ............................................................................ 3 Suitable cookware .................................................................................. 5 Cleaning and Maintenance ..................................................................... 5 Trouble shooting ..................................................................................... 6 Special Declaration ................................................................................. 6 IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the following: 1. Read all instructions before use the induction cooker. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against electrical shock do not immerse cord, plugs in water or other liquid. 4. Close supervision is necessary when any appliance is used by or near children. 5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment. 7. The use of accessory attachments not recommended by the appliance manufacturer may cause injuries 8. Do not use outdoors. 9. Do not let cord hang over edge of table or counter, or touch hot surfaces. 10. Do not place on or near a hot gas or electric burner, or in a heated oven. 11. Extreme caution must be used when moving an applian ce containing hot oil or other hot liquids. 12. Do not use appliance for other than intended use. 22.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment Product Introduction Midea MC-STW1501 series multi-functional induction cookers, with microcomputerized control and complete functions, are able to meet various kinds of cuisine demands by electromagnetic heating, really the optimal choice. Designations of parts Airvent Ceramic plate Supply cord Control panel MC-STW1501 Air entry Performance Parameters Model Applied voltage/frequency Rated power Dimension (mm) Weight (kg) MC-STW1501 120V~/ 60Hz 1500W 330x390x63 3.36 Operation Instructions 1. Put the pot on the cooker Put the pot which has food on the center of the ceramic plate. Make sure the air vent and the air entry are not blocked and there are not metallic objects around the cooker 2. Plug in After the power supply is connected, the buzzer sounds. 3. Turn on Press the “ON/OFF” key, the buzzer sounds and the “ON/OFF” indicator lamp light, the lamp-house become blue, the level 1 firepower flickers, indicating that the unit is in a state of standby. 4. Heating The unit is in a state of standby, press the “∧” or “∨” key, the “ON/OFF” indicator lamp light, the lamp-house become blue, and “PAN” indicator flickers, the unit start the heating mode. Under the heating function, the unit perceive the cooker, the “PAN” indicator extinguish, the lamp-house become to red. If remove the cooker, “PAN” indicator flickers, the lamp-house become to blue. The default heating is level 1, you can adjust the heating by pressing the “∧”or “∨” key. 5. Keep Warm Press the “keep warm” key when the unit is in a state of standby, the buzzer sounds, “warm” indicator lights, indicating that the unit is in keep warm state. The default time for keep warm is 60mins, control the food in the 60±20℃. Can be cancelled the keep warm function by pressing the “keep warm” key, if pressing the “∧” or “∨” key. You can exit the keep warm function and enter into the Heating. 6. Lock Press the “Lock” key for 3 second, the buzzer sounds. The “Lock” indicator lights, indicating that the unit is in lock state. Under the lock state, if press other key, The “Lock” indicator flickers, prompt the operation is inefficacy. Under the lock state, Press the “Lock” key for 3 second, the buzzer sounds. The “Lock” indicator extinguish, indicating that the unit is exit the lock state. 7. Timer Under the heating or keep warm state, press the “timer” key, the buzzer sounds. ”MIN” indicator lights, the timer indicator flicker and display “00”, indicating that the unit enter into the timer mode. You can press the “∧” or “∨” key to adjust the time in the range of 1-99mins. pressing the “∧” or “∨” key and short , the time can increase or decrease 1 minute , pressing the “∧” or “∨” key and hold , the time can increase or decrease 1 minute. Stop the “∧” or “∨” key after 5 second,the timer indicator display steadily, confirm the currently timer. Under the time state you can cancelled the timer by pressing the “timer” key. the buzzer sounds. The ”MIN” indicator extinguish, the timer indicator don't have any display, indicating that the unit exit the timer mode and return the default time working state. When the timer return to 0, the unit shut down automatically, and the buzzer sounds for 5 times. IF the unit have not set the timer or set the time is “00”. The defalut time of turn off for every level are shown in the following table: Heating level Defalut time for turn off(hours) 8. Shut down Press the "ON/OFF" button in the standby state or working state, the buzzer will sound and the cooker will in off mode. Suitable cookware Iron oil frying pan Stainless steel por Iron pan Enamel stainless steel kettle Enamel cooking utensil Iron pIate Iron kettle 1. Please use the pots sold along with the unit by recommend. It is better not to use other alternatives so as to avoid any unfavorable influence on the operational performance. If using other pots, please observe the following conditions: Requirement for pot materials: containing magnetic inducting materials; Shape requirement: plat bottom, with the diameter within the range of 12 cm and 18 cm. 2. After first use, some white spots would appear at the bottom of the pot. This is normal. Please pour some vinegar into the pot, heat it at about 60-80℃, then wipe the spots away with brush. 3. The induction cooker can identify mostly pot except the non-magnetism steels. 4. If the have no cookerware or the unsuitability cookerware. The buzzer sounds about 10 seconds, it will turn off. Cleaning and Maintenance Please pull out the plug and wait the remain heat is cool before maintenance. 1. Ceramic panel and control panel Slight stains: Please wipe off plate with soft moistened cloth . Tough stains: Please clean with soft moistened cloth dipped in little toothpaste or neutral liquid cleaner and clean with soft moistened cloth until no residue exists. During the cleaning, never clean the cooker surface with a rigid brush. 2. The induction cooker body shall be cleaned lightly with soft dry cloth. The dust around the air entry and air outlet can be cleaned with a flexible brush or cleaner. Trouble shooting 1. Power cord replacement If the supply cord is damaged, it must be repaired by the manufacturer or authorized service agent. 2. Trouble shooting The Lamp-house indicator lights up, but heating does not start. Special Declaration
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-701 Creation Date--Text : Producer : Corel PDF Engine Version 1.0.0.525 Mod Date--Text : Creator Tool : CorelDRAW 12.0 版 Modify Date : 2009:07:16 13:28:49+08:00 Metadata Date : 2009:07:16 13:28:49+08:00 Format : application/pdf Title : STW1501英文说明书090619 Document ID : uuid:2615cd89-68e3-455c-ae64-62695660c7aa Instance ID : uuid:fce5219d-0c75-473e-9b16-fe120e137e59 Has XFA : No Page Count : 8 Container Version : 9 Creator Version : 11 Creator : Adobe Illustrator(R) 11.0 For : �� ����, FtpDown Create Date : 7/16/2009 1:24 PM Bounding Box : 23 20 388 581 Image Height : 561 Image Width : 365 Image Size : 365x561 Megapixels : 0.205EXIF Metadata provided by EXIF.tools