MEIAN Technology MD-211R Wireless magnetic Contact User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3434759
Application ID	5wWdkA4wWjhNkXMV7opuig==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.8kB (172546 bits)
Date Submitted	2017-06-22 00:00:00
Date Available	2017-06-22 00:00:00
Creation Date	2017-05-11 10:36:20
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2017-06-13 14:01:19
Document Title	MD-211R 门磁英文 PN20160827A001.cdr
Document Creator	CorelDRAW
Document Author:	Administrator

The installation guide for users of MD-211R
wireless magnetic contact
1. Introduction
MD-211R is a "mini" wireless door detectors, the company
is currently Health Produced with the newest radio series host
supporting the use of detectors. The detector outside Type novel,
smooth lines, and the installation environment can be integrated,
as a family with jewelry.
Strong emission capacity of the wireless door sensor detector
signal, the host range of a radius of 150 meters.It has a high
sensitivity inner circle. Before use, the need to code with the host,
which is the only Address code learning to the host. "△" sign at
the host and the corresponding magnetic stripe needs place.
This detector is a separate triggered when the magnetic stripe
and the emitter position about 2.5cm When the transmitter that
is emitting an alarm signal to the alarm host, in order to prevent
an attempt to dive from windows and doors, etc.The intruder.
Indication LED
Tamper switch (back)
Magnetic
stripe
Transmitter
Product appearance
2. Specification
Model:MD-211R
①Wireless sending distance(open area):inset
antenna 150m.
②Working frequency: 433MHz
③Working voltage:3V lithium battery
④Current: static ≤10uA, alarm:≤50mA
⑤ Alarm output: Police intelligence report, Recovery
Report, tamper report, Low battery report with a status
report.
⑥Status Report: Initial power-up or reset of the transmitter
after the operation, door Send a working status report to
the host every 50 minutes.
⑦Working Temeprature:-10℃~50℃
⑧Dimesion:69.5(L)*21.2(W)*19.5(H)mm
Magnetic stripe:34.5(L)*10(W)*13.2(H)mm
⑨Color: White
3.The main function and installation
3.1 Main functions
A. Adopted low consumption CPU
B. Adopted unique Mutil codes
C. Auto status report
D. Anti-lost report
E. Open door/window indication
3.2 Installation
Pay attention to these following points.
Buzzer
Do not mount on the place possiblely to be
destroyed outdoor.
Do not mount at the loose place
When use as wireless detector, do
not mount near strong magnetism
item.
3.3 Installation introduction
Note：This product use CR123A lithium battery，no battery set in when leave factory please set in
battery before using.
1．Press lightly the snap near the led, and open the cover;
2．Set in battery with right positive and negative poles;
3．Code with the panel
A、Set the wireless control pane at "auto code" mode.
B、Let MD-211R enter working mode，parallel put transmitter and magnetic stripe together,
move the magnetic stripe at the moment of pressing the ensure key on the panel and let the
detector send wireless signal. Then the panel will study the code of detector.
P/N:20160827A001
—
—
C、The user also can enter address code manually, that will reduce error rate, set the control panel
at manual code mode , then enter the 9-digit code on the label of transmitter.
4、Testing magnetic switch：parallel move magnetic stripe and transmiter. MD-211R will send signal
once to the control panel, and the LED on the transmitter flick 5 times.
5、Fix the cover.
3.4 Install Note:
1.If not drill on the wall，please use strong double side glue or other strong Bonding agent to fix the
magnetic stripe and transmitter on the right place.
2. Do not mount on the base-loose place, possible to be destroyed place or with strong magnetic
interference(eg.loudspeaker, high voltage cable)
4.maintance
4.1 Change battery
The working life of battery is about one year，change battery when the signal between the detector and
control panel become weak.
1.Open cover;
2.Take out used up battery and put in new battery rightly;
3.Test battery, parallel move the magnetic from transmitter, then the control panel will make alarm
information.
4.2 Clean and fix the cover
The surface of the detector will be dusty when used for a long time, please use wet cloth to clean it.
5. Miscellaneous Comments
Our wireless products are very reliable and tested to high standards. However, due to low transmitting
power and limited range(required by regulatory authorities , there are some limitations to be considered.
it will course the panel to make alarm at any alarm situation, following are some common examples
1. voltage instability for the control panel;
2.under voltage of detector etc.
These problem are not so difficult to solve, if needing help please contact the supplier.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help .
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
—
—

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Administrator
Title                           : MD-211R 门磁英文 PN20160827A001.cdr
Create Date                     : 2017:05:11 10:36:20+08:00
Creator Tool                    : CorelDRAW
Modify Date                     : 2017:06:13 14:01:19+08:00
Metadata Date                   : 2017:06:13 14:01:19+08:00
Producer                        : Corel PDF Engine Version 14.0.0.701
Document ID                     : uuid:1e57bf0f-58b3-4a5a-9984-ff3705700355
Instance ID                     : uuid:12d8b6e4-c125-4b8e-bc75-2c8de4ff2081
Page Count                      : 2
Author                          : Administrator

EXIF Metadata provided by EXIF.tools