MEIAN Technology PB-433R Wireless Remote Control User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2291339
Application ID	n74DgsC3uXvolR6UJfuH0w==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	102.5kB (1281231 bits)
Date Submitted	2014-06-11 00:00:00
Date Available	2014-06-11 00:00:00
Creation Date	2014-04-28 09:22:20
Producing Software	Corel PDF Engine Version 15.0.0.486
Document Lastmod	2014-06-05 14:22:01
Document Title	PB-433R滑盖型遥控器 英文Q
Document Creator	CorelDRAW X5
Document Author:	Administrator

PB-433R Wireless Remote Control
Away
1.INTRODUCTION
PB-433R is mini wireless remote control with 4 keys; it is one
Emergency
help
LED
Home
Disarm
of important accession of our company,With special out look,
it can be decoration and convenient for taking along. Easy to
operate,has high sensibility in 100 meters.With the function to
arm,disarm.emergency help.
2.SPECIFICATION
3.MAIN FUNCTION
Model:PB-433R
Effective area:100m in open air
Frequency:433MHZ
Code:28bit ID.8bits function code,36 bits date code
Voltage:6V.With two CR2032 Lithium batteries.
working life is about one year
Information emission:LED light on
Temperature:-10℃~50℃
Size:62*32.5*13mm
Weight:25g
A. 4 independent function keys
B. For fast arm/disarm, easy and convenient,emergency
call,safe and covert.
C. Exquisite design, with pictures for key functions easy
explain
D. Scientific address code with millions of combination,
which enable all the remoter controller to be exclusive one,
without permitting, it is impossible to copy our wireless
products.
E. Low consumption for transmitting, indication for signal
out put visible
F. Compatible with all our 433MHz\868MHz wireless products.
4.USING
EMERGENCY HELP
1.For away arm,press the key
AWAY for 2 seconds
2.For at home arm, press the key
HOME for 2 seconds
3.For disarm,press the key DISARM 4.The emergency help is safe and cobert.
press the key HELP for 3 to 4 seconds to
for 2 seconds
realize this function
5.TEST AND MAITENANCE
5.1 Coding
1.Set the control panel to the enroll wireless device status.
2.Let the remode on coding mode,and press any key of the remote at the moment the panel on remote coding mode.
5.2 Test
When finished in the factory,PB-433R has build-in batteries.Before testing,we will need to code wireless producte
with PB-433R,for the coding details,please view the CODE SETTING of the manual of wireless products.The testing
process as following;
1.Keep the distance of PB-433R from the wireless products above 3 meters;pressthe key with lock picture
on the remoter controller for 2 seconds,the lamp for checking receiver's state should light twice.
2.confirm the wireless products have the same response, such as hear the hint voice SYSTEM ALARM.
3.Operate in the corner of covered zone of wireless products,such as the place blocke by will and large object,
to see if the system has the sanme hint voice
P/N 20110228-2
5.3.Change batteries
Change new battery when the signal become fade in the process of transmitting.
Please follow the below steps to change the batteries.
1.Use small screw driver to open the small screw on the back of the remoter controller. Keep the screw carefully
2.Fetch the back cover and pull out the old batteries.
Screw
CR2032 batteries
(Battery pole
up:positive
down:negative)
3.Input the new batteries,pay attention to the anode and cathode.
4.Fix the back cover with the screw.
5.Test the installed batteries;press any key,the LED lamp on the remoter controller lighting, the control panel
will response correspondingly.
6.SYSTEM LIMITED
Our wireless products are reliable,while in certain situation,our system will be limited, the situation can be some
one as below;
1.When the control panel is not stable,or the remoter controller is not in the covered range, it may lead to signal
sending not success.
2.Undervoltage of the remote controller,etc.
For any requirement for help,please contact with our company
Note:without getting permission from corresponding person to
change the products at will,may lose the right of using this product
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
P/N 20110228-2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2014:04:28 09:22:20+08:00
Creator Tool                    : CorelDRAW X5
Modify Date                     : 2014:06:05 14:22:01+08:00
Metadata Date                   : 2014:06:05 14:22:01+08:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : PB-433R滑盖型遥控器 英文Q
Producer                        : Corel PDF Engine Version 15.0.0.486
Document ID                     : uuid:721b5345-9495-4e54-a014-3f8c3353ecb1
Instance ID                     : uuid:d439cf7b-9684-4c1f-8f3e-5a93aad1937d
Page Count                      : 2
Author                          : Administrator

EXIF Metadata provided by EXIF.tools