MEIDI ELECTRONIC D2 HD DLP Pocket Projector User Manual
SHENZHEN MEIDI ELECTRONIC CO.,LTD HD DLP Pocket Projector
User Manual
The user manual of the HD DLP Pocket Projector Product name: HD DLP Pocket Projector Trade:MDI Mode:D2 FCC ID: 2AGYM-D2 defective 4 Projector Features 02 DMD FEATURE Display Technology: DLP(0.3" 720P DMD) Resolution: 1280*720 (support 1080p video) Market brightness: Light Source & Lifespan: OSRAM 500 Lumens Lx@1M LED(R.G.B.) Q8 (Up to 30,000 hours) Brightness: REAL 200 ANSI Lumens Contrast ratio (Full on/off): 〈3000:1 Focal length: 60mm Distortion: <1.0% Projection Size: 5.5"~200"(0.2M~7M) Throw Ratio: 1.6:1(distance/width) Uniformity: > 85% Focusing: Motor Focus by remote control OS FEATURE (ANDRIOD) Display Sharing:Airplay/Miracast GPU & CPU:Quad-Core & Quad-Core OS: Android 4. 4.2 RAM: 1GB DDR3 Flash: 8GB Bluetooth: 4.0 WIFI: 2.4G Offset: 100% BASIC FEATURE Built-in Battery: 4000mAh Music Format: WMA, AAC Power Consumption:36W Video Format: RM,RMVB,MKV,WMV,VOB Built-in Speaker:2*2W Picture Format: JPEG, BMP, PNG Input Voltage: DC 12V/3A; AC100V~240V Ports: HD/AV//USB*2/Micro SD card(TF)/ Dimension(L*W*H): Audio Out/DC in 175mm*102mm*28mm Accessories: Remote control, Adapter, Weight: 445g Tripod, User Manual Accessories Description Please unpack and check all of the following items carefully. If anything is missing, 03 please contact your dealer. Projector Tripod D EF G H DC IN User Manual USB1 USB2 HD microSD Back View AC cable Remote Control AUDIO OUT Adapter Audio out USB1 Audio out port Updates V69 software and reads external device USB2 Updates Android system and reads external device HD port High definition multimedia interface, audio input port, connect to PC/iPad Remoto control Receiving remote control signal TF card port Connect to TF card, Micro SD storage device DC Turn on/off Power input port Can turn on/ off the projector when you press the key User Manual 04 SETTINGS 1. Switch on the power button for 3~5 seconds, the projector will turn on and lights will be on. Main OSD Language English Picture Mode Sound Mode Color Temperature Aspect Ratio Rotate Keystone Software Update(U.. Restore Factory De.. Device Info menu appears after boot logo. Press the FOCUS "+", "-" on the remote control to adjust visual clarity. Turn on/off HDMI/AV Up Left Right Parameters can be adjustable Confirm Down Recommen Menu Option Focus+ Contrast 55 0~100 Focus- Brightness 60 0~100 Color 55 0~100 Sharpness 60 Aspect Ratio 16:9 4:3/16:9/zoom*1/zoom*2 Rotate Front projection Front /Rear /Ceiling projection Keystone AUTO FOCUS VolumeVolume+ Return Restore Factory De.. 0~100 Auto/Manual Yes/No Remote control & external connecting devices 2. Connect to the Internet or Input signal source There are many different ways to choose signal output of the external devices, depending on PC manufacturer. Please refer the tablet below for more details. 1). Other Settings Manufacturer Key Acer Fn+F5 The shortcuts on the tablets was Fn+F8 updated by August 2013, please Dell EPSON Fn+F8 Fujitsu Fn+F10 Hp Fn+F4 IBM Lenovo NEC Panasonic SHARP Caution Click “Setting” on the home page, as below. Enter “ setting”; select WLAN under “Wireless and networks” Click WLAN; search the wireless signal and choose to connect, and enter password. This device supports AV, HDMI, VGA signal sources input, remote control and touch panel keys. check the computer user manual for reference, and subject to actural shortcuts. Fn+F7 Fn+F3/F7 Fn+F3 2). Other Settings Bluetooth Setting: If you need to set up Language&Input: Fn+F3 Bluetooth function, you should find the setting Settings-general- Language&Input; Fn+F5 of it in: this projector supports Multiple Language. SONY Fn+F7 SOTEC Fn+F3/F5 Toshiba Fn+F5 Settings-Bluetooth, then select the “Bluetooth searching” and connect it to the device which you need. This projector supports Bluetooth speaker, Bluetooth fingers and other external devices. Reset to defaults: When the device appears software fault or abnormal use, you can reset it to defaults. Detailed setting method: Settingsgeneral- Backup&Reset. 3. Multi-screen Mirroring interactive Function 2. Android Phone Screen Mirroring Turn on the projector and connect it to the WIFI. Ensure your iPhone is Please make sure whether your phone can support Mirroring function. connected to the same WIFI network. (Most of the smartphones on the market can support it) Turn on the 1. Iphone Screen Mirroring 1) Enter Screen Share projector and connect it to the WIFI. Ensure your Android phone is connected to the same WIFI network. 1) Turn on projector, start Miracast, as shown in figure below: 2) You'll need to go to the Settings menu of your Android phone, tap Display, and then tap Multi-screen. 2) Choose the Airplay option on your iPhone. 3) At the top of this page, toggle “Multi-screen” to ON and it will scan for the nearby Miracast devices. After a minute, the name of projector should pop up. You'll be prompted for the PIN code display on projector. After you connect the projector to your mobile phone, your mobile phone's screen will be mirrored onto the projection display. 3) Choose device name, and toggle “Mirroring” ON; tap “Done”, then you can stream music, photos, and videos etc. to your projector. In addition, If your phone don't support Multi-screen, you can download "Happy Cast Mirroring" APP in APP Store. Android 5.0 or greater can support mirroring natively, below Android 5.0 supports streaming. More multiscreen mirroring interactive function, looking forward your further explored. 05 06 AV Interface AV AV input source with Red/yellow/blue audio cable, such as DVD Player FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct The interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. such modifications could void the user’s authority to operate this equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. You can search more information form the webpage: https://www.fcc.gov/
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : Administrator Create Date : 2016:09:09 16:11:40+08:00 Modify Date : 2016:09:09 16:11:40+08:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2016:09:09 16:11:40+08:00 Creator Tool : Microsoft® Office Word 2007 Format : application/pdf Creator : Administrator Document ID : uuid:a0bdb16f-33cc-4587-965e-d461863a0b58 Instance ID : uuid:93009280-3163-4042-a1e9-8e329fdb9fca Producer : Microsoft® Office Word 2007 Page Count : 10EXIF Metadata provided by EXIF.tools