MEIDI ELECTRONIC M7 Intelligent projector User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2851215
Application ID	bn4judky7is7Zu21wVDz2A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.86kB (135688 bits)
Date Submitted	2015-12-22 00:00:00
Date Available	2015-12-23 00:00:00
Creation Date	2015-12-19 13:43:32
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2015-12-19 13:43:32
Document Title	Microsoft Word - User Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

The user manual of the Intelligent projector
Product name: Intelligent projector
Trade: MDI
Mode: M7
FCC ID: 2AGYM-M7
Operating Instructions
Thank you for purchasing our projector – you can now enjoy your new device and its wide variety of
functions! Before operating your new device, please thoroughly read through this manual and retain it for
future reference. It is important that you follow all safety instructions carefully to ensure proper operation of
your device. If there are any discrepancies between this manual and your product, please contact our
customer support service.
Safety Precautions
In order to ensure your safety, as well as the maximum longevity of your device, please take note of the
following precautions:














Do not connect any defect cables, accessories or other defected external devices
Ensure the device is switched off and disconnected from the power supply before cleaning. Use a
soft, lint-free cloth for cleaning. Never use liquids, gaseous or easily flammable cleansers (sprays,
abrasives, polishes, alcohol).
Ensure no moisture ever leaks into the interior of the device – if it does, switch off the device and
disconnect it from the power supply immediately.
Always handle the product with care.
The device can become hot when used for extended periods of time – do not stand the device on any
parts of your body to prevent discomfort or injury arising from contact with the device.
Avoid touching the lens.
Never place heavy or sharp objects on the device or the power cable.
Prevent the device from coming into contact with direct sunlight, heat, temperature fluctuations, and
moisture. Do not place the device next to heaters or air conditioners.
Do not use the device during thunderstorms.
Do not make any repairs to the device by yourself. Improper maintenance can result in injuries or
damage to the device. Have your device repaired only by an authorized service center.
Do not remove the type label from your device; this will void the warranty.
Do not place the device on fabric surfaces such as tablecloths or carpets and do not cover the
ventilation slits. This may cause the device to overheat.
The ideal functioning temperature for the device is between 5℃ to 40℃.
Use only the power adapter provided. Check whether the electrical voltage of the power supply
matches the electrical voltage available at the setup location.
Risk of Eye Damage
This device is equipped with a high power LED (Light Emitting Diode), which emits very bright light. Do not
stare directly into the projector lens to avoid eye injury or irritation.
Transportation Precautions


Disconnect all peripheral devices from the projector before transport.
Confirm the projector is switched off before transport.

Ensure the projector is well protected and packaged before transportation.
Installation Steps
1. Plug in to the mains, and the standby light will come on. Then turn the projector on.
2. Place the projector on the desired surface, and adjust the focus wheel accordingly. Note: The ideal
size of the projected image is between 80 to 120 inches (to a maximum of 147 inches). The
corresponding projection distance is around 2 meters. The ideal viewing distance is about 3 meters
from the screen.
3. If required, connect to a WIFI network through the “network settings” menu.
4. Control the projector using a mobile phone, or the remote control.
5. You are now fully set up – enjoy!
FAQ
Q:
A:
What do I do if the projector does not turn on?
Connect your computer or a compatible power supply to recharge the internal battery. Make sure the
projector is turned off during charging.
Q:
A:
What do I do if the image is not focused or not clear?
First, ensure the projector is horizontal at an appropriate distance from the screen, then manually
adjust the focus wheel slowly until the images are clear.
Q:
A:
What do I do if the image appears skewed or upside down?
Ensure the projector is placed horizontally on a flat surface; if inverted, select the “Screen Flip”
option under the “Set Up” menu.
Q:
A:
What do I do if the screen isn’t fully visible when it connected to a PC?
It is probably an incompatibility with the resolution – adjust the computer resolution accordingly.
Q:
A:
What do I do if the projector can’t connect to WIFI?
Either, a) ensure you entered the correct password;
Or b) make sure that the SSID of the WIFI does not include special characters or symbols, and the
password is at least 8 characters long, and that other devices can connect to the WIFI;
Or c) Try to connect the projector to another WIFI network; if it connects, try connecting your router.
Q:
A:
What do I do if my phone or other device cannot find the projector?
The mobile phone and the projector should be connected to the same WIFI network.
Q:
A:
How do I upgrade the firmware?
Under the network status, the following operation can complete the upgrade: Settings - other
settings - system upgrade - online update.
Q:
A:
What do I do if there is no sound from the external connected device?
Either, a) Check the setting up of volume on the external device.
Or b) Reconnect your external device with projector.
Power Cycling
If a problem occurs that cannot be corrected with the instructions in this user manual (see also the help below),
follow these steps:
1 Switch the device off using the on/off switch on the top.
2 Wait at least ten seconds.
3 Switch the device on again.
4 If the problem persists, please contact our technical customer service or your retailer.
Note:
The projector has a built-in fan for heat dissipation to reduce the temperature of the device. It is normal if
there is a slight sound when the fan is running.
Specification
Display Technology:
DLP
Video Format:
Light Source & Lifespan:
Music Format:
OS:
OSRAM LED (Up
to 30,000 hours )
Real 55 ANSI
Lumens
Support
Airplay/MiraCast
Android 4.4.2
WIFI:
Ram:
2.4G
1G DDR3
Resolution:
Focal length:
854*480
(Support 1080P)
70mm
Projection Size:
36”-112” (1M-3M)
Aspect Ratio:
1.19:1
Contrast ratio (FIFO):
＜3000:1
THD:
Uniformity:
＜1.0%
＞85%
Brightness:
Display Sharing:
RM,RMVB,AVI,MKV,WMV,VOB,
MP4
MP3,WMA,AAC
Picture
Format:
CPU:
JPEG,BMP,PNG
GPU:
Quad-core
Bluetooth
Built-in
Memory:
Port:
4.0
8G
Built-in
Speaker:
Power
Consumption:
Built-in
Battery:
Operating
Voltage:
Dimension:
Weight:
Quad-core 1.5GHz
HDMI/MHL/AV/VGA/USB/Micro
USB/Micro SD card(TF)
1W*1
12W
2500mAh
DC 5V /2.5A
110mm*95mm*21mm
225g
External Description
Front view:
H: LED Lens
I: Ventilation slits
Rear view:
J: Audio Out
K: HDMI
L: USB
M: Remote Control receiver
N: DC-In (power input port)
Left-side view:
O: Switch key (Switch between projector and power bank mode)
P: Air Inlet
Q: Manual focus wheel (adjust screen sharpness)
Right-side view:
R:TF card (Micro SD card)
Note:
1. Insert the TF card into the TF card slot.
2. When the projector is functioning, do not unplug the TF or USB disk to avoid data corruption or loss.
3. Tap the TF card first and then remove
Power Button
Any device with discharge function can charge the projector. In switched off condition, charging the projector
takes about 150 minutes.
The power button lights red during charging. When the battery is full，the power button lights in red and blue
color.
The Projector’s working time is about 110 min with a fully charged battery.
This projector can be used as a power bank to charge other digital devices via the USB cable.
Please switch the selection key to charging mode and then connect the projector to the device. If you need
the projector to project at the same time, please press the power button on.
USB instruction
USB port at the back side
USB stick (not included)
Max. 32GB
*Other digital device can be charged through the USB port.
The projector support projection of video/music/picture/text which are stored on an USB stick.
TF(Micro SD card) instruction
The projector support projection video/music/picture/ text which are stored on a TF(Micro SD card).
TF(Micro SD card) port at the side
TF(Micro SD card) (not included)
Max. 32GB
Data Transmission and Display-Sharing Function
Connecting with your iPhone:
1. Turn on the projector and connect it to the WIFI. Ensure your iPhone is connected to the same WIFI
network.
2. Choose the Airplay option on your iPhone. It should automatically search for the wireless account of your
M1 projector which is named “ITV@”. Click on it to connect to your iPhone to enjoy playing games, watching
films, and viewing documents on a big screen!
Connecting with Android phone:
1. Turn on the projector and connect it to the WIFI. Ensure your Android phone is connected to the same
WIFI network.
2. Choose the MiraCast option on the projector and your Android phone. The phone will automatically
search for the wireless account of the M1 projector which is named with “ITV@”. Click on it to connect to
your Android phone to enjoy playing games, watching films, and viewing documents on a big screen!
Video playback
Thanks to the great local playback function, you only need to connect the projector to a USB disk to easily
play all kinds of audio and video files. This projector can support 1080P, Blu-ray and other HD video files for
an even more impressive and immersive visual experience.
Display sharing via WIFI
If your smart devices do not support Airplay or Miracast, you can download the free EzCast App. After
connecting your smart device to the projector, you can use it to enjoy playing games, watching films, and
viewing documents on a big screen!
WIFI
Your projector supports 2.4G WIFI, means that you can watch videos on the big screen via a WIFI
connection in any room at home.
Choose WIFI in the “Settings” option, select the WIFI account which you want to connect to. After connecting
successfully, you can enjoy a free online video viewing experience.
Bluetooth
The projectors support Bluetooth. They can be linked with your Bluetooth devices – such as home theatre
speakers, mini Bluetooth speakers,
th
he Bluetootth GamePad
d, game guns, etc.
Morre features
For more detail on using th
he full featu
ures of proje
ectors, please look at our
o official w
website at www.szmdi.c
com.
SHEN
NZHEN MEID
DI ELECTRONIIC CO.,LTD.
Address: 12th Floor, Buildin
ng
Nanshan
DDistrict, Shenzhen
n,
Website：
www.szmddi.com
C3, i
China
Park, No.1001 Xueyuan
Road,
Xi
i Li
Towwn,
FCC
C Statemen
nt
This
s equipmen
nt has been tested and found to co
omply with the
t limits for a Class B digital dev
vice, pursuant to
partt 15 of FC
CC Rules. These limits are dessigned to provide rea
asonable pprotection against
harrmful
interference in a residential installatio
on. This eq uipment ge
enerates and can radiaate radio fre
equency energy
and, if not insta
alled and used
in acco
ordance witth the instru
uctions, may cause haarmful interfference to radio
com
mmunication
ns. However, there is no guarantee
e that interfference will not occur inn a particula
ar installatio
on. If
this equipment does cause
e harmful in
nterference to radio or television re
eception, w
which can be
e determine
ed by
turn
ning the equ
uipment off and
a on, the user is enccouraged to
o try to corre
ect
The
e interferencce by one or more of th
he following
g measures::
Reo
orient or relo
ocate the re
eceiving anttenna.
Incrrease the se
eparation be
etween the equipment and receiver.
Con
nnect the eq
quipment into an outlett on a circui t different frrom that to which the re
receiver is connected.
Con
nsult the dea
aler or an experienced
d radio/TV te
echnician fo
or help
This
s device com
mplies with Part 15 of FCC Rules .
Ope
eration is su
ubject to the
e following two
conditio
ons:
This
s device ma
ay not causse harmful interferencce, and this
s device mu
ust accept aany interferrence receiived,
inclu
uding interfe
erence thatt may cause
e undesired
d operation.
Note
e: The ma
anufacturer is not responsible fo
or any radiio or TV in
nterference caused by unauthorrized
mod
difications tto this equ
uipment. Such
modiffications co
ould void the user’s authority to
t operate this
equipment.
FCC
C RF Radia
ation Exposu
ure Stateme
ent
This
s equipmen
nt complies with FCC RF
R radiation
n exposure limits set forth
for an uncontrolle
ed environm
ment.
This
s equipmen
nt should be
e installed and
a operate
ed with a minimum
dis
stance of 200 centimete
ers between
n the
radiator and yo
our body.
You can search
h more inforrmation form
m the webp
page: https:///www.fcc.gov/

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2015:12:19 13:43:32+08:00
Modify Date                     : 2015:12:19 13:43:32+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - User Manual
Creator                         : Administrator
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:6f02abdc-42e6-425a-b833-66c99b0ebeef
Instance ID                     : uuid:96ee976b-7002-4276-91a5-07c7fafae7c8
Page Count                      : 7

EXIF Metadata provided by EXIF.tools