MEILOON BTS21 SPEAKER SYSTEM User Manual
Meiloon Industrial Co., Ltd. SPEAKER SYSTEM Users Manual
MEILOON >
Users Manual
BTS 2.1
OWNER’S MANUAL
$ TRIM LINE $ $ TRIM LINE $
$ TRIM LINE $ $ TRIM LINE $
WHAT’S INSIDE
Soundbar Subwoofer
Mounting Template
AC Power Adapter Remote3.5mm to Dual RCA Cable
$ TRIM LINE $ $ TRIM LINE $
Optical
Digital Audio Out
Audio Out
L
R
1
1
2
6
7
5
ONOFF
Power
DC IN
Optical
L
R
8
2
4
3
5
6
4
ONOFF
Power
DC IN
Optical
L
R
7
2
3
1
Headphone
5
6
4
ONOFF
Power
DC IN
Optical
L
R
73
3.5mm TO DUAL RCA ANALOG CONNECTION (IF TV HAS NO HEADPHONE OUT SEE NEXT PAGE)
$ TRIM LINE $ $ TRIM LINE $
Optical
Digital Audio Out
Audio Out
L
R
1
1
2
6
7
5
ONOFF
Power
DC IN
Optical
L
R
8
2
4
35
6
4
ONOFF
Power
DC IN
Optical
L
R
7
2
3
1
Headphone
5
6
4
ONOFF
Power
DC IN
Optical
L
R
73
DUAL RCA TO DUAL RCA ANALOG CONNECTION
QUICK START
NOTE: RCA Cables not included.
DIGITAL OPTICAL CONNECTION
NOTE: Digital Optical Cable not included. The Digital Optical Connection requires that the TV outputs “PCM” digital
sound and NOT Dolby® Digital sound from its Digital Output. Refer to the TV Owner’s Manual for guidance.
Optical
Digital Audio Out
Audio Out
L
R
1
1
2
6
7
5
ONOFF
Power
DC IN
Optical
L
R
8
2
4
3
5
6
4
ONOFF
Power
DC IN
Optical
L
R
7
2
3
1
Headphone
5
6
4
ONOFF
Power
DC IN
Optical
L
R
73
TV REMOTE PROGRAMMING
Press
and
Hold
2
1Solid Green
Solid Orange
One Foot
7Flashing Green
to Solid Green
8To program Volume Up and Volume
Down buttons repeat the steps shown
and replace steps 4 and 6 with the
button you want to program.
1 2 3
4 5 6
7 8
0
Mute
ChVol
9
Press Slowly x4
6
3Flashes Orange
Press Once x1
4
5
To program Volume Up and Volume Down buttons
repeat the steps shown and replace steps 4 and 6
with the button you want to program.
If you are trying to program a cable/satellite box
remote or other universal remote without success,
please try programming your TV or Cable Box
remote instead.
BLUETOOTH ® WIRELESS TECHNOLOGY
Bluetooth
Bluetooth
ON
EnergyBTS
Devices
Connected
Settings
Bluetooth
Bluetooth
ON
EnergyBTS
Not Paired
EnergyBTS
Devices
Settings
1 2 3 You can pair a device equipped with
Bluetooth
wireless technology at any time by activating it on
your device.
Once your device equipped with
Bluetooth
wireless
technology is paired, the BTS 2.1 will automatically
switch to the
Bluetooth
wireless technology input
(SOLID BLUE LIGHT) and you can stream your music.
If you switch inputs on the BTS 2.1, the
Bluetooth
wireless technology connection will automatically be
terminated.
You must disconnect your device before pairing
another device equipped with
Bluetooth
wireless
technology by either:
• Pressing and holding the SOURCE button on
the BTS 2.1 control panel 3 seconds
• Turning off
Bluetooth
wireless technology on
the paired device
• Pressing the
Bluetooth
wireless technology
button (∞) on the BTS 2.1 remote
*Example only. Your device may differ.
BUTTONS
On / Off
3D Surround
Bluetooth
Source
Status Light
Mute
Volume Up
Volume Down
Source
Volume Up
Volume Down
Mute
Subwoofer
Volume Up
Subwoofer
Volume Down
STATUS LIGHTS
STANDBY MODE
SOLID RED Power Off (Standby Mode) FLASHES GREEN ONCE 3D Surround turned on
SOLID GREEN Power On, Source is Optical Input FLASHES RED ONCE 3D Surround turned off
SOLID ORANGE Power On, Source is Analog Input FLASHES BLUE QUICKLY Waiting to pair with
Bluetooth
device
SOLID BLUE Power On, Source is Paired
Bluetooth
device
FLASHES GREEN /
ORANGE / BLUE
Volume Up, Volume Down, Subwoofer
Volume Up or Subwoofer Volume
Down is pushed
You do not need to turn off the BTS 2.1, just turn
off your TV (or Satellite / Cable Box) and the BTS
2.1 will automatically go into standby mode in
approximately 10 minutes.
Standby mode is indicated by a red status light on
the front panel. When your TV (or Satellite / Cable
Box) is turned back on the BTS 2.1 will automatically
turn on again.
PLACEMENT
TV
TV
TVTV
Rubber Feet
.5” (15mm) .5” (15mm)
TURN OFF TV SPEAKERS
CARE AND CLEANING
TV Audio Settings Menu
(Recommended)
OR Volume
TV Speakers Off
BTS 2.1 will not Power On
• Is it plugged into a live outlet?
• Is the rear power switch on?
No sound
• Is it plugged into a live outlet and the rear power switch is on?
• Are all cables from the TV/Cable Box/Satellite Box plugged in tightly?
• If the optical cable is being used were the clear plastic caps from
both ends removed before connecting?
• Is the volume turned up?
• Is standby o (no SOLID RED status light)?
• Is the source input correct?
• Turn o the rear power switch, then back on.
TV/Cable/Satellite Box Remote will not program
• Carefully follow all remote programming instructions.
• Carefully go through the remote programming again, but use the
original remote that comes with the TV. You DO NOT need to then
reprogram using your cable/satellite/universal remote control.
• Program the original TV remote to the BTS 2.1 (if original is a dierent
one), then use the universal remote without programming it.
• You may need to repeat programming of a function in some cases.
• There may be some cases the BTS 2.1 is unable to learn certain
remote codes.
Bluetooth
wireless technology does not work
• Is the device paired to the BTS 2.1?
• Move your device closer to the BTS 2.1 and make sure it is paired.
• If the status light blinks RED while attempting to pair, start the
pairing process over.
Subwoofer does not work
• Are the two subwoofer wires connected properly to the soundbar?
• Is the subwoofer volume on the remote adjusted properly?
For Questions, contact Energy Customer Service:
In the United States: 1-866-441-8208
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
registered trademarks of Dolby Laboratories.
The
Bluetooth
® word mark and logos are registered trademarks owned by
Bluetooth
SIG, Inc.
and any use of such marks by Klipsch Group, Inc. is under license.
TROUBLESHOOTING
Register your Energy speaker at energyspeakers.com/register.
3502 Woodview Trace Indianapolis, IN 46268 • 866.441.8208
energyspeakers.com
Energy and the Energy logo are registered trademarks of Audio Products International
Corp., registered in the U.S. and other countries. Audio Products International Corp. is a
wholly owned subsidiary of Voxx International Corporation.
EnErgy BTS 2.1
Important Safety InStructIonS
IMPORTANT SAFETY INSTRUCTIONS!
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accor-
dance with the manufacturer’s instructions.
8. DO NOT install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. DO NOT defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wider
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. PROTECT the power cord from being walked on or
pinched, particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the
manufacturer.
12. USE ONLY with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms or when
unused for long periods of time.
14. REFER all servicing to qualified service personnel. Servic-
ing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the ap-
paratus, the apparatus has been exposed to rain or mois-
ture, does not operate normally, or has been dropped.
15. DO NOT expose this apparatus to dripping or splashing
and ensure that no objects filled with liquids, such as
vases, are placed on the apparatus.
16. To completely disconnect this apparatus from the AC
Mains, disconnect the power supply cord plug from the
AC receptacle.
Language
17. The mains plug of the power supply cord shall remain
readily operable.
18. DO NOT overload wall outlets or extension cords beyond
their rated capacity as this can cause electric shock or fire.
The exclamation point, within an equilateral triangle, is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electrical shock to persons.
WarnInG: To reduce the risk of fire or electrical shock, do not
expose this apparatus to rain or moisture.
WarnInG: No naked flame sources – such as candles – should
be placed on the product.
WarnInG: Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such as sunshine, fire
or the like.
WarnInG: Risk of leakage. Only use the specified type of
batteries. Never mix new and used batteries.
Observe correct polarity. Remove batteries from products that
are not in use for extended periods of time. Store batteries
in a dry place.
WarnInG: Do not handle leaking or damage Lithium
batteries.
WarnInG: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type.
WarnInG: Do not place batteries in mouth or ingest. Keep out
of reach of children and pets.
WarnInG: Do not recharge non-rechargeable batteries.
Language
Please dispose of any used batteries properly, following any
local regulations. Do not incinerate.
WarnInG: Do Not Open! Risk of Electrical Shock. Voltages
in this equipment are hazardous to life. No user-serviceable
parts inside. Refer all servicing to qualified service personnel.
Place the equipment near a main power supply outlet and make
sure that you can easily access the power breaker switch.
WarnInG: This product is intended to be operated ONLY from
the AC Voltages listed on the back panel or included power sup-
ply of the product. Operation from other voltages other than
those indicated may cause irreversible damage to the product
and void the products warranty. The use of AC Plug Adapters is
cautioned because it can allow the product to be plugged into
voltages in which the product was not designed to operate. If
the product is equipped with a detachable power cord, use only
the type provided with your product or by your local distributor
and/or retailer. If you are unsure of the correct operational
voltage, please contact your local distributor and/or retailer.
FCC AND CANADA EMC COMPLIANCE INFORMATION
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Approved under the verification provision of FCC Part 15 as a
Class B Digital Device.
Caution: Changes or modifications not expressly approved by
the manufacturer could void the user’s authority to operate
this device.
Caution: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device is to comply
with Class B limits. All peripherals must be shielded and
grounded. Operation with non-certified peripherals or non-
shielded cables my result in interference to radio or reception.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
WIRELESS TRANSMITTER COMPLIANCE INFORMATION
The term “IC:” before the radio certification number only sig-
nifies that Industry Canada technical specifications were met.
Le terme «IC:» avant le numéro de certification radio signifie
seulement que les spécifications techniques d’Industrie
Canada ont été respectées.
This device complies with part 15 of the FCC Rules and the
applicable Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes : (1) l’appareil ne doit
pas produire de brouillage, et (2) l’utilisateur de l’appareil doit ac-
cepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
This equipment complies with FCC and IC radiation exposure
limits set forth for an uncontrolled environment. This equip-
ment should be installed and operated with minimum distance
20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any
other antenna or transmitter.
Cet appareil est conforme à FCC et IC l’exposition aux
rayonnements limites fixées pour un environnement non
contrôlé. Cet appareil doit être installé et utilisé avec une
distance minimale de 20 cm entre le radiateur et votre corps.
Cet transmetteur ne doit pas être co-situé ou opérant en
liaison avec toute autre antenne ou transmetteur.
Energy and the Energy logo are registered trademarks of Audio Products International Cor p.,
registered in the U.S. and other countries. Audio Products International Cor p. is a wholly
owned subsidiary of Voxx International Corporation.