MEILOON TT025 active loudspeaker User Manual
Meiloon Industrial Co., Ltd. active loudspeaker
MEILOON >
Contents
- 1. Manual
- 2. User Manual
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2701040 |
| Application ID | +OvSSyMfia6kovzSN0JEvg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 435.88kB (5448524 bits) |
| Date Submitted | 2015-08-02 00:00:00 |
| Date Available | 2015-08-03 00:00:00 |
| Creation Date | 2015-05-21 18:48:49 |
| Producing Software | PDF-XChange 3.60.0127 (Windows) |
| Document Lastmod | 2015-06-23 17:16:41 |
| Document Title | User Manual |
2 premium wireless series
Paradigm” ‘
% dP'lsay-Fi‘
OWNER'S MANUAL 7 mum is home
F‘aradigmiPW-BfloiPW-SfloiPW-AMFLOwnevsiMaiwaLOBZM5Indd 1 2015-03-20 3'08 PM
RECYCLIM AND REJSE GtIDEIJNES FOR HIRDPE
In accerdanuawith the European Union WEEE “Nesta Elastiieal and Electronic Equip-mm] directive effective August 1:, 2005, wewould like ta notilyynu that this product may contain
regulated materials which. upon disposaL according to the WEEE directive. require special reuse and recycling processing. For this reason Paradigm Electronics Inc. [manufacturers ol
Paradigm speakers and Anthem Electronics] has arranged with our disrihutors in European Union member nations to collect and recycle this product at no cost to you. To find your Local
_ distributor please contact the dealertrom whom you purchased this product urge to ourwebsite at paradigmsom.
Please nine that the producl only raus underlheWEEE directive. When disposing of packing and othershipping malarial we enouurage you to recycle through the normal channels.
m: FCC ID: RAE'I'I'UZS and IC ID: TINA—TIME Wm FCC ID: RAGBSUZS and IC ID: 719llA-35025 PWAHPI FOG ID: RASMPOZE and ID ID: 719flA-MFD25
This device complies with Part 15 ofthe FCC Rules. Operation is subject to the following two conditions: (1 I This device may not cause harmlul interference. and [2] This device must accept
any intarlanama received, including irdennatien that may muse undesired operation. changes or modifi-tions not expressly approved by the party responsible tar mmplianae oould void the
user’s authorityto operate the equipment. For Indoor use only In the band 5150—5250 MHz
This product hu been tested and found to comptywrth the limits fora Class E digital device. pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against
harmful inoerlerence in a residential installation. This product generates. uses. and can radiate radio frequencyenergy and. il not installed and used in accordance with the instructions. may cause
Iarmllll interference to radio communications. However. “ISIS is no guarantee Ihat interferenm will not occurin a particular insIaUation. Ifthis product does cause harmlul interference to radio or
television reception, which can be determined bytuming the equipment all and on. the user is encouraged to try to correct the inlerlerence by one ormore of the lollovring measures:
— Reorient or relocate the receian antenna.
- increasetheseparation between the equipment and receiver:
— Connect the equipment into an outlet on a circuit dll‘ferent lrum that to whlth the receiver Is connected.
— Consult the dealeroran experienced radio/TV technician for help.
This device complies Mth industry Canada licence-exempt RSS standardlsi. Operation Is subject to the lollowlng two conditions:
[1 I this device may not cause interference. and
[2| this devise must accept any interference, including interremnee that may cause undesired operation or lhe device.
WIRELESS TRANSMITTER NMPU‘NCE INFDRMATION
The term “IC' before the radio certification numberonly signifies that Industry Canada technicalspecilicalionswere met. Thisequipment complies with FCC and IC radiation uposure limits set forth
For an uncontrolled environment. This equipment should It natalled and operated with minimum distance 2|] cm between the radistnrand your hody. This transmitta must not be cn-lulzted or
operating in coniunction with any other antenna or transmitter. To reduce potential radio inteflarenm to other users. the antenna type and its gain should be so chosen that the equivalent isotmpilelly
radiated power [e.i.r'.p.I is not more than that permitted lorsuocesshrlcornmunication.
PARADIGM ELEETNONIfi RESERVES THE RENT 'I'll CHANGE SPECIFICATIONS ANDIOR FEATURESVIITHOIJT NOTICE” DESIGN IMPROVEMENTS ANE INWNPORATED.
PARADIGM and ANTHEM are registered trademarks of Paradigm Eledronics Inc. PWBCID. PW ADD, PW AMP, ARC are trademarks ol Paradigm Electronics Inc. Copyright 0 Paradigm Electronics Inc.
All rights reserved. All other products and senrices mentioned may be trademarks or service marks oftheir respective ownerls].
For ms patents. see hood/mtantsutseem. Manuraclumd under license rmm ms Licensing Limited. ms, Play-Fl. the Symbol. and Flay-Fl together in combination with the Symbolare trademarks
of DTS. Inc. [ITS and Flay—Fl are registered trademsrls ol DTS. Inc. © EITS. Inc. All Rights Reserved.
Apple and theApple logo are trademarks at Apple Inc.. registered in the us. and other countries. App Store is a service mark at Amie Inc.
Windows” 'Ea registered trademark of Microsoft Corporalion in lhe United Slales and other countries.
Amazon. Kindle. Fire. and all related logos are trademarks olAmaxonmm. Inc. or its afl‘iliatfi.
Googla Play is a trademark of Google Inc.
................. Ill-ll
205 Annagem Blvd. Mississauga. ON. Canada LET 2V1
03201 5
For more information visit paradigmmm
FIndiamJ’W-GwJ’W-NXLFW-AMF,OwnEtleunuaLOGZmSJndd I @ ”15-03-20 313ml
ParadigrniPW-flfloiPW-GooiFW—AMPicwneisiManuaLOSEOI 5 mod 1
TABLE OF CONTENTS
Congratulations! .................................................... 1
Important SaIety Instructions ......................................... 2
Important SaIety Information ......................................... 3
What's In The Box .................... .. A
PW 800 Premium Wireless Speaker. . li
PW 600 Premium Wireless Speaker. . . . . 5
PW AMP Premium Wireless Amplifier [a
Network Requirements .............................................. 7
System Requirements ............................................... 7
Features & Functions: ............................................... 8
Controls &Connections ............... . 9
PW 800 Premium Wireless Speaker. . .
:I‘iO
PW 600 Premium Wireless Speaker ..... .
PW AMP Premium WirelessAmpliiier. . . . . 11
Connecting PW AMP To Speakers ..................................... 12
Adding An Optional External Subwooier ............................... 13
CONGRATULATIONS!
Thank you for purchasing this Paradigmm Premium Wireless
Series product.
Paradigm“ and its sister company, Anthem‘” have leveraged over 30 years in
groundbreaking loudspeakerand amplifier design to create the Parading
Premium Wireless Series of wireless speakers and powerful amplifier.
Paradigm Premium Wireless Series Owner's Manual
Network Connection Setup - Option A [Recommended Selup}
Wi-FI Protected Setup lWPSI ..................................... 14
Network Connection Setup — Option B
Standard WirFiSetup Using Your Device ........................... 16
Network Connection Setup - Option C
Wired Setup .................................................... 18
Play Music ......................................................... 17
Anthem Room Correction [ARC"I ..................................... 20
Updates ........................................................... 21
Reboot & Reset ..................................................... 21
Basic Troubleshooting .............................................. 22
TechnicalSpecifications .................. 25
PW 800 Premium Wireless Speaker. . . . . . . . 25
PW 6011 Premium Wireless Speaker. . . . . . . . 26
PW AMP Premium Wireless Amplifier . . . . . 27
Limited Warranty ................................................... 28
The inclusion of DTS Play-Fi“ technology to Paradigms technology platforms
means you can enioy high fidelity, lossless muSic streamed from yourAndroid
device. iOS device, tablet or PC — to a premium sounding Paradigm speaker, or
amplifier. Using your home WirFi network, you can stream music to indiVidual
speakers, or play the same music to all Paradigm" Premium Wireless Series
devices you have inslalled r all with Crystal clearclarity
2015-03-20 3'06 PM
IMPORTANT SAFETY INSTRUCTIONS
.\‘.°‘.U".“.‘".N
Read these instructions.
Keep these instructions.
Heed allwarnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with
the manufacturer's instructions
Do not install near any heat sources such as radiators. heat
registers, stoves, or other apparatus [including amplifiers] that
produce heat.
Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety If the provided plug does not fit into your outlet,
consult an electrician for replacement ofthe obsolete outlet.
ParadigmiPW-flfloiPW-GooiFW—AMPicwneisiManuaLOSEOI 5 mod 2
10.
II.
12.
13.
IA.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the paint
where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart. stand, tripod, bracket, or table
specified by the manufacturer, orsold with the apparatus.
When a cart is used. use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused
for long periods oftirne.
Refer allservicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way. such
as power-supply cord or plug is damaged. liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
2015-03-20 3'06 PM
Paradigm Premium Wireless Series Owner's Manual
IMPORTANT SAFETY INFORMATION
The lightning bolt flash with arrowhead symbol,
A within an equilateral triangle, is intended to alert
the userto the presence of uninsulated ”dangerous
voltage' Within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock.
WARNING!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point Within an equilateral triangle is
A intended to alert the userto the presence of Important
operating and maintenance [servicing] instructions in WARNING: TO REDUCE THE RISK OF FIRE OR if \
the literature accompanying the appliance. ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE AND OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED
ON THIS APPARAT S.
WARNING! Do not use your Paradigm product[s] - TO COMPLETELY DISCONNECT THIS APPARATUS
A outside of the country of original saleivoltage FROM THE AC MAINS, DISCONNECT THE POWER
requirements vary by country. Improper voltage can SUPPLY CORD PLUG FROM THE AC RECEPTACLE-
cause damage that will be potentially expensive to . THE MAINS PLUG OF THE POWER SUPPLY CORD
repair. Paradigm products are shipped to authorized SHALL REMAIN READILY ACCESSIBLE.
Paradigm distributors with the correct power supply
for use in the country of intended sale. A list of
authorized distributors can be accessed at This equipment is a Class II or double insulated
www.paradigm.com or by emailing infoldparadigrncom. SIECIFICHI appliance. It has been dESIQHEU in SUCh a
way that it does not require a safety connection to
electrical earth.
ParadigmiPW-flfloiPW-GooiFW—AMPicwneisiManuaLOSZOI5Indd 3 ($3 2015-03-20 3-06 PM
WHAT'S IN THE BOX
PW 800 Premium Wireless Speaker
1. Paradigm PW 800 Speaker 4. ARC” Mrcrophone Subwoofer speaker: GQXchs
2. 6' [1.8 m] Power Cable 5. 15‘ [4.5 m] ARC” Microphone USB CabLe Tweeter speaker: 30x2pcs
3. 6' [1.8 m] Ethernet CabLe 6. Owner's Manual
ParadrgmiPW-flfloiPW-GooiFW-AMPiownevsiManuaLoafln5mud A ($3 2015-03-20 3-06 PM
Paradigm Pram/um Wireless Series Owner's Manual
PW 600 Premium Wireless Speaker
‘L Paradigm PW 600 Speaker 4. ARC” chrophone Subwoofer speaker: 6 Q X 1pc
2. 6' [1.8 m] Power Cable 5. 15‘ [4.5 m] ARCm Microphone USB CabLe Tweeter speaker: 30 X ZPCS
3. 6' [1.8 m] Ethernet CabLe 6. Owner's Manual
ParadwgmiPW-flfloiPW-GooiFW-AMPiownevsiManuaLoafln5mud 5 ($3 2015-03-20 3-06 PM
NETWORK REQUIREMENTS
You must have the followmg to connect your Paradigm product to
your network:
0 A high-speed DSL/Cable modem or a fiber-to-the-home
broadband connection for reliable playback of music services
based on the internet. Note: Satellite internet services are
prone to playback issues due to fluctuating download rates.
. If your modem is not a modem/router combination you must
purchase and install a router into your home network before
proceeding.
- If you plan to use the DTS PLBY*Fi® App on an Android" or
iOS device or you are setting up a Paradigm product for Wi-Fi
streaming, you will need a wireless router.
- Have your network password ready before connecting the
Paradigm product to your network.
SYSTEM REQUIREMENTS
0 An Android deVice running Android 2.2 orlater
- An iOS device running iOS 6.0 or later.
ParadigmiPW-flfloiPW-GooiFW—AMPicwneisiManua|703201 5 mod 7
Paradigm Premium Wireless Series Owner's Manual
NOTE: if your wireless connectiVity is weak or not available,
connectyour Paradigm product to your router with the supplied
ethernet cable.
TIP! Paradigm Premium Wireless Series products communicate
with wireless networks that support 802. l 7 g/n wireless
technology. For the fastest streaming performance, a network
that supports 802. 11 n wireless technology is recommended. A
network supporting 802. 7 it] may be used, but it will effectively
stream to only one deVice equipped with DTS Ptay-Fi®.
TIP! For superior performance connectyour PC or NAS (Network-
Attached Storage] drive that holds your personal music library to
your network router using the provided Ethernet cable.
- AWindowsg PC running Windows® 7. 8 or 8.i I32 and 64 bit].
\$/ 2015-03-20 3'06 PM
FEATURES & FUNCTIONS:
Power Button [I]:
- Press Ito switch the power on/off.
- PressIto rebootyour Paradigm product
[see page 27].
- Press-to reset your Paradigm product
to factory settings /see page 27/.
Volume Up/Down Buttons [III]:
- Press Ito increase the volume levet.
Press Hto decrease the votume levet.
- Press and hold either/E to ramp the
volume level up or down.
Mute Button [I]:
- Press Ito mute the audio. The Mute
button [I] Witl illuminate WHITE when
the mute function is active.
- The Mute Button [I] also switches on/off
ARC" Settings
— To setup ARC “ and to learn how it
corrects room deficienCies see page 20.
— To switch off ARC” settings: PRESS and
HOLD Ifor 5 seconds. Upon releasing
the button, a "negative tone' Witlsound
verifying ARCT settings are SWitched off.
ParadigmiPW-flfloiPW-GooiFW—AMPiowneisiManuaLOSZOI 5 mod 6
7 Repeat the process to switch on ARC”
settings. You wilt hear a ”positive tone"
when ARC” settings are switched on.
Input Button [I]:
- PRESS and RELEASE the to toggle
between Wiretess/Wired Network
Streaming Mode AND Rear Input Mode.
- The Input button [I] illuminates WHITE
when Wireless/Wired Network Streaming
Mode is enabled and BLUE when the
Rear Input Mode is enabled.
0 Your Paradigm product has the foltowing
rear input: 3.5 mm Analog Input [PW 800 and
PW 600] OR RCA Analog input [PW AMP].
- Wireless/Wired Network Streaming
Mode is the default input mode. If your
Paradigm product is set to Rear Input
Mode and music is streamed. by
default your Paradigm product will
switch to Wireless/Wired Network
Streaming Mode.
Wi-Fi Setup Button:
. Initiates WieFi setup for both WieFi
Protected Setup [WPS] [seepage 74/
and Standard Wi-Fi Setup {see page 76/.
Stereo/Mono Setting Switch IL/S/R]
{PW600 ONLY}:
- For stereo output from one PW 600
speaker, set the switch to the “5" [Stereo]
position. Ifyou choose to have a stereo
pair setup with two Paradigm PW 600
speakers, set the SWitch to either "L" [Left]
or ”R" [Right] depending on the position
of your speakerwithin a tistening space.
For example: If your speaker is in the Left
position within a Listening space. set the
switch to the "I." [Left] position.
Wi-Fi Indicator
The Wi-Fi Indicator [‘9‘] tells you what your
Paradigm product is doing:
- Fast Blinking 7 Your Paradigm
product is booting up.
Blinking — Your Paradigm product is
attempting to connect to a Wireless router.
Slow Pulse — Setup Mode.
Two Blinks > Pause — WPS Mode.
Solid — Connected to router.
Off — Connected to a router
using a Wired connection.
2015-03-20 3'06 PM
Paradigm Prem/um Wireless Series Owner's Manual
CONTROLS & CON NECTIONS
PW 800 Premium Wireless Speaker
-------- WieFi Indicamr
Power
AC Power 3.5 mm
IIIIIIII vulume UP [Mains] AnaLog Ethernet C)
Input Input \nput
,,,,,,,, Volume Down
,,,,,,,, Mme
VVVVVVVV Inpm
WieFi Subwoofer Mim' USB USB
Setup Output [factory (factory
Bu‘ton [Opt/DNBU use only) use only}
ParadwgmiPW-flfloiPW-GooiFW-AMPiownevsiManuaLoafln5mud 9 ($3 2015-03-20 3-06 PM
CONTROLS & CONNECTIONS lcont'd .../
PW 600 Premium Wireless Speaker
........ WieFi Indicator AC Ppwer 3.5 mm
[Mains] AnaLog E‘hernet
........ Power Input \nput Input
........ Volume Up
vvvvvvvv Volume Down
........ Mute
VVVVVVVV Input
_ WieFi Subwoofer Stereo/ Mim USB USB
For one PW-éOO speaker set to S‘ereo IS] and Setup Ou‘put Mono [factory [factory
for two PW7600 speakers sex m Left [L] or Rxgm [R]. Bu‘ton [option-30 Settlng' use only) use only}
10
ParadwgmiPW-flfloiPW-GooiFW-AMPiownevsiManuaLoafln5mud 10 ($3 2015-03-20 3-06 PM
CONNECTING PW AMP TO SPEAKERS
The speakers to be connected to the Paradigm PW AMP should
be rated to handle at least 75 W for 8 Ohm speakers and at least
ISDWtorA Ohm speakers.
CAUTION: Do not connect speakers, which are rated
less than A Ohms to the Paradigm PW AMP.
CAUTION: While making connections with bare
wire, ensure that none of your bare wire comes in
contact With a an adiacent terminal.
Your PW AMP's binding posts can be used with banana, plug connectors,
and bare wire.
IMPORTANT! Correct polarity [or phase) is critical for proper
soundstage imaging and bass performance. Connect one speaker
ata time to ensure proper connection of everychannel. The red
l+l amplifier terminal must be connected to the red l+} speaker
terminal. The same applies to the black l—l terminals. Make sure
all wires are firmly fastened. Repeat this connection procedure for
each speaker in your system.
12
ParadigmiPW-flfloiPW-GooiFW—AMPicwneisiManuaLO3201 5 mod 12
IMPORTANT! Ifyou hear a distinct lack of bass and a dislocated
stereo image then one or more ofyour speakers may be
connected out ofphase [polarity is reversed}. Reacheck to
ensure that each speaker's cable is connected with correct
polarity: red 1+} to red l+/ and black [—1 to black l-l.
Bare Wire Connectors:
If you are using speaker wire without banana plugs, simply press
in the spring loaded binding postto expose the connection hole.
Insert the stripped end of the speaker Wire into the hole, then
release the binding post. The exposed speaker wire should be
securely gripped by the binding post.
Banana Plug Connectors:
If you are using banana plugs, remove the end caps from the
PW AMP'S binding posts to expose the banana plug socket;
insert the banana plug into the socket.
2015-03-20 3'06 PM
Paradigm Premium Wireless Series Owner's Manual
ADDING AN OPTIONAL EXTERNAL SUBWOOFER
if desired. an external subwoofer can be used to reinforce Upon connecting an external subwoofer, your Paradigm product
low-frequency channel information in multichannel and stereo will automatically detect its presence and redirect low frequency
recordings. For seamless system matching, we recommend content from the speakers to the subwoofer If your subwoofer has
a Paradigm subwoofer, however any brand of subwoofer can an adjustment for bandwidth [BW], set it to 100 HZ [recommended
be connected. setting] if you Will not be running ARC. if you will be running ARC
set it to maximum bandWidth [or bypass]. if you ran ARC before
Usmg a highiquality RCA style cable, connect the Sub Out on connecting a subwoofer, you will need to run it again.
the Paradigm Premium Wireless Series product back panel to the
"LFE In/Sub in" on the subwoofer's back panel.
TIP! Reference your subwoofer's Owner's Manual to learn how
to properlyadjust the subwoofer's level andphase controls to
{4}} achieve proper blending with (he PWAMP {4}}
i3
Faradigm,PW-6007PW-6007FW—AMPiownersiManuaLDSQm5 indd 13 @ 2015-03-20 3:06 PM
NETWORK CONNECTION SETUP - OPTION A {RECOMMENDED SETUP)
Wi-Fi Protected Setup [WPS]
WiiFi Protected Setup [WPS] is a feature found on most wireless 3. 10 seconds laterthe Wi-Fi indicator [4*] will start rapidly flashing
routers that allows your Paradigm product to securely and for 20 seconds; this indicates your Paradigm product is booting up.
automatically connect without needing to enter a password. WPS is
not a standard feature on all routers, and only one Paradigm product
can be set up at a time.
Once the Wi-Fi Indicator [‘9‘] starts pulsing slowly. your
Paradigm product is in Discovery Mode: it is ready to connect to
your Wi-Fi network.
Check your router's owner‘s manual to see if WPS is an available
feature. or look for a button on your router marked With the WPS
logo [“1. If your router does not have WPS. then use the Standard NOTE: if the WirFi indicator I?) £1065 NOIPUlSE SlOle- PRESS 3”"
WiiFi Setup [see "Network Connection Setup70ption B"on page 76/. HOLD the Wi-FiSefup button furg 5950”“ or Willi/0U heartwo
. , . tones; this initiates the STARTUP of Wi-Fi Setup Mode.
i. To avotd a delayed Wireless setup. place your Paradigm product
in close proximity to your router; you may move your Paradigm
product to a desired location once semi) is complete-- 5. To initiate WieFi Protected Setup [WPS], PRESS and HOLD the
Wi-Fi Setup button on the back of your Paradigm product for
A seconds or until you hear a tone. The Wi-Fi Indicator [$1
will blink twice in continuous intervals to indicate the initiation
of WPS mode. Now push the WPS button [“1 on your router
Z. Plug-in your Paradigm product and press the Power button [I].
shortly after. a tone will be heard to indicate power on.
NOTE: Your Paradigm product on“ enter Standby Mode if you cannot find a WPS button on your router refer to the
Ireducedpower consumptioni afterZD minutes ofno music FOUIEF'S owner's manual.
playing. H W,” automatically wakeiup when itsenses mu5ic 6. Once the Wi-Fi indicator l?) is solid [not blinking], this indicates
being received. The Power button {M} will stay illuminated
whether the unit is powered on or in Standby Mode. If there is
a power failure while your Paradigm product is switched on. it
will switch back on once power has been reestablished.
your Paradigm product is connected to your WiiFi network.
14
ParadigmiPW-flfloiPW-GooiFW—AMPicwneisiNianuaLOSZOi5mod 14 ($3 2015-03-20 3-06 PM
7. Download the DTS Playaifl® App:
Android Device Users:
For Andreid users. download the free DTS PlayaiEi® App from
Google Play or the Amazon App Store.
iOS Device Users:
For iOS users download the free DTS PlayaFi" App from the
Apple App Store.
’ Downloadnnlhe
. AppStore > %
PC Users:
a] For PC users, go to htips://play-fi.cam/apps/windaws to
download the free DTS PlayeFi@ app
b] Click on ”Download Free VerSion".
c] The DTS PlayeFiQ App icon will show up in yourtask
manager once it is fully downloaded.
d] Click on the DTS Play-Fifi” driver.
e] Click on any zone to begin controlling.
ParadigmiPW-flfltLPW-GooiFW—AMPicwneisiManuaLOSZm 5 mod 15
Paradigm Premium Wireless Series Owner's Manual
8. Connect your mobile deVice or PC to the same WiaFi network
that you want to connect your Paradigm product to.
9. Launch the DTS Play-Pi“ App. Upon launching the App, it
will automatically detect the Paradigm product connected
to your WieFi network. and prompt you to name your device
with one of our preaset names, or create a name of your
own choosing.
i5
\$/ 2015-03-20 3'06 PM
NETWORK CONNECTION SETUP - OPTION B
Standard Wi-Fi Setup Using Your Device
i. To avoid a delayed WiiFi setup, place your Paradigm product
‘” dose p’DXimilY ‘0 V” Tm”? YO“ “Y mm V” Paradigm NOTE: If the WiiFi Indicator/’s‘) does not pulse slowly, PRESS
product to a deSIred location once setup '5 complete. and HOLD the WiiFi'Selup button fordseconds or untilyou
2. Plug—in your Paradigm product and press the Power button [ hear two tones,- this initiates the STARTUP of Wi-Fi Setup Mode.
shortly after, a tone will be heard to indicate power on.
5. Download the DTS Play-Fi® App
NOTE: Your Paradigm product will enter Standby Mode
lreducedpower consumption] after 20 minutes ofno music
playing. it will automatically wake-up when it senses music For Android users, download the free DTS Play-Pi® App from
being received. The Power button {M} Will stay illuminated Google Play or the Amazon App Store.
whether the unit is powered on or in Standby Mode. If there is
. . . . , an iT 0N Li“.
a power failure while your Paradigm product is SWilched on, it > % mazon > %
Will SWItch back on once power has been reestablished. G (3 { play
iOS Device Users:
3 it] seconds later the WiiFi Indicator [$1 will start rapidly flashing For iOS users download the free DTS Play-PW App from the
for 20 seconds; this indicates your Paradigm product is booting up. Apple App Store.
4. Once the Wi-Fi Indicator l’?‘] starts pulsing slowly, your , Dawn‘mdnnme
Paradigm product is in Discovery Mode; it is ready to connect . AppStore > $
to your WirFi network.
Android Device Users:
16
ParadigmiPW-flfllLPW-GooiFW—AMPicwneisiManuaLOSZm5Indd 16 ($3 2015-03-20 3-06 PM
PC Users:
3] For PC users, go to htt‘ps://play—fi.com/apps/windaws to
download the free DTS Play-FiG app,
b] Click on ”Download Free VerSion".
c] The DTS PlayeFiG’ App icon will show up in yourtask
manager once is fully downloaded.
d] Click on the DTS Play-Fi” driver.
e] Click on any zone to begin controlling.
6. Connect your mobile deVice or PC to the same Wi-Fi network
that you want to connect your Paradigm product to.
7. Launch the DTS Play-Fi® App and follow these instructions:
Android Device Users:
a] The App will automatically find your device and provide
prompts for setup.
b] Touch the “Setup button" on the screen
c] Enter the password for your Wi-Fi network; the App will
connect your device to your network. You will notice the
WieFi indicator on your Paradigm product will have changed
from "blinking" to solid illumination.
d] Your device is now connected. You may re-name your device
with one of our pre-set names, or create a name of your
own choosing.
madigm}w-eoojw-eoojw-AMPpwnersManuaLoazm5 indd 17 @
Paradigm Premium Wireless Series Owner's Manual
iOS Device Users:
a] The App will prompt you that a new device is ready for setup.
Click on the screen to direct you to setup instructions.
b] Exit the DTS PlayeFi % Mn» amazon > %
ParadigmiPW-EOOJ’W-GooiFW-AMPicwneisiManuaLO3201 5 mod 16 ($3
iIJS Device Users:
For iOS users download the free DTS PlayiFi’E App from the
Apple App Store.
> %
I Download on the
App Store
PC Users:
a] For PC users, go to https://play-fi.cam/apps/windaws to
download the free DTS Play-Fi® App.
b] Click on "Download Free Version".
c] The DTS Play-Fi‘” app icon Will show up in your task
manager once is fully downloaded.
d] Click on the DTS Play-Pia driver.
e] Click on any zone to begin controlling.
Connect your mobile deVice or PC to the same Wi-Fi network
that you want to connect your Paradigm product to.
Launch the DTS Play-Fi® App. Upon launching the App, it will
automatically detect the Paradigm product connected to your
Wi-Fi network, and prompt you to name your deVice With one of
our pre-set names, or create a name of your
own choosing.
2015-03-20 3'06 PM
PLAY MUSIC
Once your Paradigm product is connected to your home network,
you can start playing music anytime.
1. Activate the DTS Play-Fie App on your mobile device or PC. It
you have setup more than one Paradigm product, select which
one you want to stream music to.
2. Select your music source — personal music library or any
subscription-based music service contained on your mobile
deVice or PC, internet Radio, orfrom select online music
services such as Deezer, Songza, etc. {visit our website at
paradigmcom to Viewa full list ofavailable mu5ic serwcesi.
How to Control Multiple Paradigm Premium Wireless
Series products:
1. To connect additional Paradigm Premium Wireless Series
products to your network, open the DTS PlayeiPiE7 App and
select "Setting".
2. Select, “Add PlayeFi Device"
3. Follow the instructions to add each Paradigm Premium
Wireless Series product.
NOTE: you can add up to 16 Paradigm Premium Wireless Series
products to your home network. A single mobile device can stream
music to 8 Paradigm Premium Wireless Series products.
Faradigm,PW-6007PW-6007FW—AMP,OWnerS,ManUaLDSQDi 5 indd 19
Paradigm Premium Wireless Series Owner's Manual
Primary/Secondary Zones:
When using the DTS Play-Pi® App on your dewce, you Will notice
when streaming music to your Paradigm Premium Wireless Series
product that there are two groups: Primary and secondary zones.
The DTS Play-Fi6 module within your Paradigm Premium Wireless
Series product requires that a primary speaker be selected to create
a new listening session or zone. The purpose oithis is to eliminate any
echo, found on other ecosystems, and to maximize synchronization
down to 1 millisecond.
We suggest thatyou select the Paradigm Premium Wireless Series
product with the strongest signal strength as yourprimary deVice.
it should be noted that secondary speakers are connected to your
primary speaker. so ifyou disable your primary speaker for any
reason, your secondary speaker will be temporarily unavailable
until a primary speaker is selected again.
i9
2015-03-20 3:06 PM
ANTHEM ROOM CORRECTION [ARC'Ml
Even when the finest speakers are perfectly pUSitioned, the room 5. Remember to hold the microphone so that it is pointing UP
itself still has a dramatic impact on any system's sound, an impact toward the ceiling. Refer to the diagram below.
more profound than that of any individual component. Various
solutions have fallen in and out of favor over the years, but none
has solved the problem of "the room." Until ARC.
6. For best results. hold the microphone in 5 different pOSitions
around the room.
Using proprietary processes and the power of your PC, the ARC
system analyzes each speaker's in-room sound. then computes the TIP! Once the ARC process 15 complete, ”79 “”9519" listening
required correction to yield optimal performance from every speaker. curves W’“ be stored and ”“195 willbe played back reflecting ”1959
it's a process that takes approximately 15 minutes. Anthem's ””9550” 935” timeyoustream music tayaurParadigm PFOdUCt-
approach is a true audiophile solution to the problems of the room. T0 toggle bBCk 3W forth between pre andposiARC COWGCUW- or
to disable ARC refer to the "Mute Button in) " section on page 8.
IMPORTANT! The listening space must be silent while performing
ARC. A noisy computer fan, a dishwasher or microwave running,
etc. can negatively affectARC's measurements.
How to Correct Room Deficiencies using ARC Technology: ARC
1. Ensure that your Paradigm product is already connected on Microphone
your home network and is powered "on". ‘
2. Download the ARC-2 software from www.3nthemAV.com and install
it. Once the drivers are installed. follow the on-screen instructions.
3. Using the 15' [4.5 m] USB cable. connect the ARC microphone to a
Windows® PC running Windows@ 7 or 8 [32 and 64 bit].
4. Look forthe icon on yourdesktop and launch theARC" program. Follow
the prompts on your computer screen to successfully run the ARC"
software; the entire process Should take apprOXimately i5 minutes.
20
ParadigmiPW-flfloiPW-GooiFW—AMPicwneisiManuaLOSZm5Indd 20 ($3 2015-03-20 3-06 PM
Paradigm Premium Wireless Series Owner's Manual
UPDATES
DTS Ptay-Fi" App Update: Paradigm Firmware Update:
if the DTS PlayeFi‘f) app on your device requires an update, the app At Paradigm we constantly strive to improve the performance and
will notify you that an update is available and guide you through functionality of your system. as a result from time to time your
the update process. Paradigm Premium Wirless Series product will require firmware
updates. Please regularly check our website at www.paradigm.com
for the latest firmware updates.
REBOOT & RESET
Reboot your Paradigm Product: Reset Your Paradigm Product to Factory Settings:
PRESS and HOLD the Power button [I] for 3 seconds. The Mute PRESS and HOLD the Power button [I] for 10 seconds [at 3 seconds C)
button [I] will start blinking once a refresh has been achieved; the Mute button [I] will start blinking]; once you hear a tone [at 10
upon releasing the button a tone will verify a refresh. seconds] to verify a reset, immediately release the reset button.
21
ParadigmiPW-flfloiPW-GooiPW—AMPicwneisiManuaLOSZm5Indd 21 ($3 2015-03-20 3-06 PM
BASIC TROUBLESHOOTING
If a problem occurs, you can try the troubleshooting suggestions
CAUTION: Warning: Do not open the product. listed below. If one of these doesn't remedy the problem, or
A Under no circumstances should the product be you are not sure how to proceed. please contact the Paradigm
repaired by anyone other than an authorized Customer Support team and we will be happy to help.
Paradigm Dealer, as this will invalidate the Customer Support
warranty. Please contact Paradigm Customer _ _ _ _
Support for more information. o Visut our websnte at paradigm.com/support
0 Email us at supportiflparadigmxom
Problem Possible Solutio
lam unable to connect 1. Verify that your WieFi network is functioning.
the Paradigm Premium
Wireless Series product
to my Wi-Fi network.
2. Your router‘s WieFi signal may be weak or your Paradigm product may be out of range of your
router's Wi-Fi network. Move the Paradigm product closer to the router.
3. Before connecting to your network, verify that your Paradigm product‘s input button [I] is illuminated in
WHiTE, this indicates the Wireless/Wired Network Streaming Mode. ifthe input button [I] is illuminated
in BLUE, this indicates the Rear Input Mode; press the input button [I] to select the Wireless/Wired
Network Streaming Mode for a wireless input connection.
4. Reboot your Paradigm product {see page 21/.
5. Reset your Paradigm product to factory settings (see page 21/.
22
Pavedigm,PW-6007PW-6007FW—AMPiownersiManuaLDSQm5 indd 22 @ 2015-03-20 3:06 PM
Paradigm Premium Wireless Series Owner's Manual
Problem Possible So
The DTS Play-H” App Verify that the following are true:
cannot find my Paradigm
Premium Wireless
Series product.
1. The Paradigm product is fully powered on and in Discovery Mode [Wi-Fi Indicator I?) is
pulsing slowly]
2. You are within the recommended range of your router.
3. Your device has its Wi-Fi enabled.
4. There are no other apps on your device that are currently running that are impeding wireless
connectivity to your network.
- Restart your phone, tablet or PC [refer to the Owner's Manual for further details].
0 If you still can't find the Paradigm product on your network, and are in an office environment,
verify with your network administrator that no special permissions are enabled that would prevent
external wireless devices from broadcasting within the network.
- If the Paradigm product remains unfound, perform a Reboot [see page 21} on the offending unit and
redownload the DTS Play-Fi" App.
0 If the Paradigm product remains unfound, perform a Factory Reset [see page 21] on the offending
unit and reedownload the DTS PlayeFi" App.
23
Pavedigm,PW-6007PW-6007FW—AMPiownersiManuaLDSQm5 indd 23 @ 2015-03-20 3:06 PM
BASIC TROUBLESHOOTING (cont'd...}
Problem Possible So
The DTS Play-Fi‘” App if you see this message, it could mean one or more things:
says “Play-Fi Devices
Lost .. - The connection to your network is very weak.
- There is heavy network traffic.
- You have moved out of your personal networks coverage range.
0 You have lost your network connection.
0 You have connected to a network other than the one your Paradigm productls] are on.
0 Your device's wireless streaming has been taken over by another app.
0 Your device lost power in the middle of communication.
Make sure the following are true:
0 Verify that your network setting and that your devices are connected to the same network.
0 Ensure that your device has not left the range of your router.
0 Verify that your device is on the same network as your Paradigm product.
Finally, exit and then restart the DTS Play-FF” App. It should now find all of your Paradigm productls].
if you are still unable to find the Paradigm producllsl. perform a Reset [see page 21} on the offending
unit and re-download the DTS Play-Fi" App.
24
Pavedigm,PW-6007PW-6007FW—AMPiownersiManuaLDSQm5 indd 24 @ 2015-03-20 3:06 PM
Paradigm Premium Wireless Series Owner's Manual
TECHNICAL SPECIFICATIONS
PW 800 Prem' Wireless Speaker
Design 4-driver. 2 way speaker
High Frequency Driver Two 1" [25 mm] SePAL‘" dome, ferroelluid damped / cooled, extended pistonic range
Bass/Midrange Driver 5" [127 mm] SVPAL'" driver, higheexcursion foamrrubber elastomer surrounds, 1"highrtemp voice coil
Low Frequency Extension 39 Hz
Frequency Response Ian Axis] +/7 2 :18 from 44 H2 , 20 kHz
Frequency Response [30°] +/- 2 dB from 44 Hz - 17 kHz
Sensitivity- Room 91 dB
Sensit ty - Anethoic 88 dB
Amplification Anthem‘D Class-D Amp: 460 W Dynamic Peak: 230 W RMS
Wireless Connectivity 2.4 GHz and 5.0 GHz; 802.11 g/n
Impedance N/A
Inputs 3.5 mm analog input, USB [for firmware updates]. Ethernet 10/100
Room Correction Anthem Room Correction , ARC“, with included calibrated microphone
Dimensions (nxwxdl 7" x 20” x 5-1/2" [17.8 cm x 50 8 cm x14 cm)“
Weight 13.8 lb [6.3 kg] each
Finish Black & White
25
Pavedigm,PW-6007PW-6007FW—AMPiownersiManuaLDSQDI5 indd 25 @ 2015-03-20 3:06 PM
TECHNICAL SPECIFICATIONS {cont'd ...}
PW 600 Premium Wireless Speaker
Design 3-driver. 2 way bookshelf
High Frequency Driver Two 1" [25 mm] SePALW dome, ferrorfluid damped / cooled, extended pistonic range
Bass/Midrange Driver 5” [127 mm] SVPAL'” driver, higheexcursion foamerubber elastomer surrounds, 1" highrtemp voice coil
Low Frequency Extension 40 Hz
Frequency Response (0n Axis] +/, 2 dB from 45 Hz , ZOkHz
Frequency Response [30"] +/- 2 :13 from 45 Hz - 17kHz
Sensitivity - Room 91 dB
Sensit ty - Anechoic 88 dB
Amplification Anthem” Class-D Amp: 400 W Dynamic Peak: 200 W RMS
Wireless Connectivity 2.4 GHz and 5.0 GHZ; 802.11 g/n
Impedance N/A
Inputs 3.5 mm analog input, USB [forfirmware updates], Ethernet 10/100
Room Correction Anthem Room Correction , ARC”, with included calibrated microphone
Dimensions [hxwxd] 10" x 6-1/2“ x 5-1/2“ [25.4 cm x16 5 cm x14 0 cm]
Weight 7.5 lb [3.4 kg] each
Finish Black & White
26
Pavedigm,PW-6007PW-6007FW—AMPiownersiManuaLDSQm5 indd 26 @ 2015-03-20 3:06 PM
LIMITED WARRANTY
Paradigm“) Premium Wireless Series productls] covered in this
manual are warranted to be and remain free of manufacturing
and/or material defects for a period of one [1) year from the date
of original purchase
For the Paradigm® Amp covered in this manual, all parts
including the amplifier are warranted to be and remain free of
manufacturing and/or material defects for a period of one l1)year.
Within the time periods specified, repair, replacement or
adjustment of parts for manufacturing and/or material defects will
be free of charge to the original owner.
Thermal Dr MechanicalAhuse/Misuse Is Not Covered
Under Warranty.
Limitations:
- Warranty begins on date of original retail purchase. It is not
transferable;
- Warranty applies to product in normal home use only. If
product is subjected to any of the conditions outlined in the
next section, warranty is void;
- Warranty does not apply if the product is used in professional
or commercial applications.
Warranty is Void if:
- The product has been abused [intentionally or accidentally]:
- The product has been used in conjunction with unsuitable or
28
ParadigmiPW-flfloiPW-GooiFW—AMPiowneisiManuaLOSZOT 5 mod 26 ($3
faulty equipment;
' The product has been subjected to damaging signals,
derangement in transport, mechanicaldamage or any
abnormal conditions;
- The product [including cabinet] has been tampered with or
damaged by an unauthorized service faCility;
- The serial number has been removed or defaced.
Owner Responsibilities:
- Provide normal/reasonable operating care and maintenance;
- Provide or pay fortransportation charges for product to f \
service facility;
' Provide proof of purchase [your sales receipt given at time of
purchase must be retained for proof—of-purchase date].
Should servicing be required, contact us using the information
below, to arrange, bring in or ship prepaid, any defective unit. Visit
ourwebsite, paradigmcom for more information.
Paradigm Electronics Inc. reservesthe right to improve the design
of any product without assuming any obligation to modify any
product previously manufactured.
This warranty is in lieu of all other warranties expressed or
implied, of merchantability, fitness for any particular purpose
and may not be extended or enlarged by anyone In no event shall
Paradigm Electronics Inc., their agents or representatives be
2015-03-20 3'06 PM
LIMITED WARRANTY (cont'd ...}
responsible for any incidental or consequential damages.
Some Jurisdictions do not allow limitation of Incidental or
consequential damages. so this exclusion may not apply to you.
Retain this manual and your sales receipt for proof of warranty
term and proof of purchase.
For additional product support, call Paradigm at 905-696-2969 or
email servicefiparadigmxam
Faradigm,PW-6007PW-6007FW—AMP,OWnerS,ManUaLDSQD15 indd 29
Paradigm Premium Wireless Series Owner's Manual
29
\fi/ 2015-03-20 3:06 PM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-702 Create Date : 2015:05:21 18:48:49+09:00 Modify Date : 2015:06:23 17:16:41+08:00 Metadata Date : 2015:06:23 17:16:41+08:00 Producer : PDF-XChange 3.60.0127 (Windows) Format : application/pdf Document ID : uuid:49246245-70af-4e70-8ec8-5848cf2d9a9c Instance ID : uuid:4e28359b-a72c-46a4-a91b-ba87b1cd351b Has XFA : No Page Count : 28EXIF Metadata provided by EXIF.tools