Download: | |
Mirror Download [FCC.gov] | |
Document ID | 2342241 |
Application ID | hBGDcOj2OGTwNaRShAVCdg== |
Document Description | Manual |
Short Term Confidential | No |
Permanent Confidential | No |
Supercede | No |
Document Type | User Manual |
Display Format | Adobe Acrobat PDF - pdf |
Filesize | 300.33kB (3754098 bits) |
Date Submitted | 2014-07-31 00:00:00 |
Date Available | 2014-07-31 00:00:00 |
Creation Date | 2014-07-22 19:21:37 |
Producing Software | ImageMagick 6.6.9-7 2014-03-06 Q16 http://www.imagemagick.org |
Document Lastmod | 2014-07-22 19:21:37 |
Document Title | out |
BEH 2 GHZ FHSS RADIEI BDNTREIL SYSTEM
@153 MT-3l:|5
Unique and functional pistol grip transmitter design
Well balanced for precise control
Nonvslip foam steering wheel
Well placed digital trim & DIR levers
Optimum third channel switch location
Low Battery warning
chk Binding and Fall Sale Setup
High performance micro 3 channel receiver
Ni-Cd charger jack in transmitter
Sound Beep
SYSTEM SPECIFICATIONS
hummer timber
Model: MT-305 Model: MR-SDD or M R3D3
FHss Output Power: <100mw Frequency 2.4GHz FHSS
Operating Voltage: 4.8 or 6V Operating Voltage: 4.8 or (W
Power Supply; 4 Cell NkallnelNl—Clel-MH Weight: 0.26 01 (1.45)
Weight: 13.701(3889)wlth Aikalines 0" ”(1159)
‘ Dimensions: 1.38 x 1 x 0.5 In (35.1 x 25.3 x 13 mm)
Frequencleodulat-cn Tyne: 2-4GHZ FHSS 1.34x1.nzxo.sain (34x26x16mm)
Fail Safe: Yes (All Channels)
FEATURES DESCRIPTIONS
Receiver Antenna Wire: The antenna wire receives the transmitter signal. The antenna wire should be installed through a nylon
tube (antenna tube) in the vertical position tor the trust reception.
Auxiliary Channel 3 Switch: Controls Auxiliary Channel 8 High and Law servo travel.
Battery Compartment: Houses the 4 'AA‘ Alkaline batteries that power the transmitter.
Bind Button: Used in the orooess of Binding the transmitter and receiver.
Bind LED: Displays the current status of the transmitter and receiver pair.
Steering Dull Rat-(DIR): The Dual Rate knob are used to adjust the Steering Dual Rate quickly and easily during use.
Grip: The Grip is molded in an ergonomic shape tor increased comfort. oonirni and reel,
Power Indicator: Indicates that there is Power to the transmitter.
Power Switch: Turns the transmitter 0N and OFF.
Ste-ring Trim Knnb(ctt1): Used to adjust the center Trim oi the Steering servo.
steering Wheel(cH1): Proportionally operates the model‘s right and lett steering control. The Steering Wheel features a molded grip
for increased comfort, control and feel.
Thmflla Trigger(cH2): Controls the speed of the model, both forward and backward, or the model's brake.
Throttle 11'im Knob (CH2): Used to adjust the center Trim oi the Throttle servo.
TRANSMITTER AND RECEIVER DIAGRAMS
Use the diagram below to familiarize yourself with the difierent parts of your MT-SDStransmitter and Mil-303m R-3DD)
receiver.
Descriptions of these parts can be found in the transmitter and receiver layout.
The transmitter antenna is mounted internally and is located in the front portion of me lransmrttsr, When you‘re driving
your model, hold the transmitter so that it's orientated as close to vertical as possible at all times and try nut to 'lolluw‘ your
model with the transmitter. This provides the best RF signal between the transmitter and the receiver. Do NOT coverthe front of
the transmitter in any way during ussi Doing so can blockthe RF signal. resulting in the loss or control of your model.
FEW”
Channel 3
Aux Switch
REM Output Charging Jack
‘ Tnmme Trigger
\ (CH2)
Steering
Wheel (CH1)
Power/Bind Thtfltlflmm CH2 Reverse
lndlcatnr knobiCHZ) EPA (cm/CH2)
4 J.
Battery Compartment
Power Switch Elna Button Steering Trim Steering Dual Rate
knobtcm) knob
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.3
Linearized : No
Title : out
Create Date : 2014:07:22 19:21:37
Modify Date : 2014:07:22 19:21:37
Producer : ImageMagick 6.6.9-7 2014-03-06 Q16 http://www.imagemagick.org
Page Count : 5
EXIF Metadata provided by EXIF.tools