MET METYH112 BLUETOOTH PORTABLE CD RADIO BOOMBOX User Manual AR4000CD v1r NO DRAFT
MET INDUSTRIAL LTD BLUETOOTH PORTABLE CD RADIO BOOMBOX AR4000CD v1r NO DRAFT
MET >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3348510 |
| Application ID | ilPGKTtKhSdtc+3gBD77sA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 253.45kB (3168171 bits) |
| Date Submitted | 2017-04-07 00:00:00 |
| Date Available | 2017-04-07 00:00:00 |
| Creation Date | 2016-11-07 16:06:24 |
| Producing Software | Adobe PDF library 9.90 |
| Document Lastmod | 2017-04-06 13:51:31 |
| Document Title | AR4000CD_v1r_NO [DRAFT] |
| Document Creator | Adobe Illustrator CS5 |
AR4000CD User Manual BLUETOOTH PORTABLE CD RADIO BOOMBOX AR4000CD User Manual Pairing the Speaker Using the Speaker Using the Speaker (cont’d) 1. Plug the speaker in and turn the speaker ON moving the [MAIN] switch to the BT position, a tone will be heard and the Bluetooth LED indicator will flash BLUE. 2. Set your Bluetooth-enabled device to search for Bluetooth devices. When your Bluetooth-enabled device finds the speaker, select “AR4000CD” from the list of found devices. 3. After a successful pairing, a tone will be heard indicating that Bluetooth is connected and the LED indicator will turn solid BLUE. Powering ON/OFF Make sure the speaker is plugged in or there are batteries installed to the speaker. • To turn the speaker ON, move the [MAIN] switch to the BT/FM/CD position. • To turn the speaker OFF, move the [MAIN] switch to the OFF position. • Move the [LIGHT] switch to ON to enable to speaker lights. Using the CD Player If a previously paired device is in range when the speaker are turned on, the speaker will connect to it automatically. On an iOS or Android Device • Go to SETTINGS > BLUETOOTH (Make sure Bluetooth is turned ON) OFF ON Bluetooth Settings Bluetooth AR4000CD MY DEVICES AR4000CD Connected Switching Play Modes • Move the [MAIN] switch to the BT position for Bluetooth mode, FM for FM radio mode, or CD for CD mode. Adjusting Volume • In all play modes, move the volume knob on the side of the speaker to adjust volume. Playing Music in Bluetooth Mode To enjoy music wirelessly on your speaker, make sure you are paired to a Bluetooth-enabled device. Once paired, you can control media playback and volume adjustment with the controls on your paired device. • To quickly pair/unpair Bluetooth, long press the [PAIR/STOP] button while in Bluetooth mode. • To play/pause music playback, press the [ ] button on the speaker or remote control. In the Box OTHER DEVICES Skipping Tracks • To skip to the next track, press the [ ] button on the speaker. • To skip to the previous track, press the [ ] button on the speaker. Speaker Power Adaptor The images above are typical of many Bluetooth- enabled devices in the market today, and are used to assist in the explanation of the pairing process. Your Bluetooth-enabled device’s interface and interaction with the speaker may slightly differ from the illustrations above. BT FM Powering the Speaker OFF CD FUNCTION TUNING VOLUME ON OFF (Left side) 1. 3.5mm Auxiliary Jack 2. [MAIN] Switch: Enable Bluetooth/FM Radio/CD mode 3. [VOL] Knob: Adjust volume LIGHT (Right Side) 4. [TUNE] Knob: Tune to stations in FM radio mode 5. [LIGHT] Switch: Enable/disable speaker lights PLAY/ PAUSE POWER RPT PROG PLAY/ PAUSE POWER 13 10 12 11 (Control Panel) 6. [PROG] Button: 7. [PAIR/STOP] Button: BT mode - Long press, unpair Bluetooth device CD mode - Quick press, stop CD playback 8. [ ] Button: Skip to previous track 9. Power LED Indicator 10. Bluetooth LED Indicator 11. Program LED Indicator 12. Repeat LED Indicator 13. Playback LED Indicator 16 14. [ ] Button: Skip to next track 15. [ ] Button: Play/pause media playback 15 16. [RPT] Button: Repeat track in CD mode 14 RPT PROG If reception is weak, position the speaker near an open window. Move the [MAIN] switch to the FM position to turn the speaker ON/enable the FM radio. • Move the [TUNE] knob to search for radio stations. (Back of Speaker) 17. DC Power Jack (Bottom of the Speaker) 18. Battery Compartment Make sure the speaker’s [MAIN] switch is in the OFF position before continuing. Using the Power Adaptor To power the speaker, plug the power adaptor into the power jack on the back of the speaker and plug the adaptor into a wall socket. DC 9V Using Batteries Remove the battery compartment cover and install 6 C-type batteries (not included) into the speaker as indicated by the “+” and “-” polarity. Once installed, return the compartment cover over the compartment. + - + - + - + + - + - Location of Controls Using the FM Radio 17 DC 9V NOTE: If the volume decreases or the sound from the speaker is distorted, it is time to replace the batteries. Open the CD door and insert a CD onto the disc drive and close the door . Move the [MAIN] switch to CD. Playing/Pausing/Stopping Music • To play/pause CD playback, press the [ ] button. While the CD is playing, the playback LED indicator will be solid RED When playback is paused, the LED indicator will flash RED. • Press the [PAIR/STOP] button to stop CD playback. Skipping and Repeating Tracks • Quick press the [ ] and [ ] buttons to skip to previous or next tracks on the CD. • Long press the [ ] and [ ] buttons to search backward or forward a few seconds in CD playback. • Press the [RPT] button once to repeat the track that is currently playing. The repeat LED indicator will flash RED. • Press the [RPT] button a SECOND TIME to repeat the entire CD. The repeat LED indicator will be solid RED. Program Tracks Programming tracks allows you to create your own order for tracks on a CD to play. To program a list, the CD cannot be playing (press the [PAIR/STOP] button to stop). Safety Warnings Limited Warranty Symbol Definitions DANGER - Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. This symbol appears only in the most extreme situations. WARNING - Indicates a potentially hazardous situation which could result in death or serious injury. CAUTION - Indicates a potentially hazardous situation, which, if not a voided, may result in minor / moderate injury or product / property damage. It also warns against unsafe practices. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of insulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) , NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CLASS 1 LASER PRODUCT Operating the unit in a way other than specified herein, or making adjustments to the unit may result in hazardous radiation exposure. The exclamation point with in an equil ateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. LASER SAFETY This unit employs a laser. Only qualified service personnel should attempt repair. CLASS 1 LASER PRODUCT WARNING: RISK OF INVISIBLE LASER RADIATION WHEN CD LID IS OPEN OR INTERLOCKS FAIL. AVOID DIRECT EXPOSURE TO THE BEAM. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits Creating a Program List 1. Press the [PROG] button. “01” will be seen on the speaker’s display and the program LED indicator will flash. 2. Press the [ ] or [ ] buttons to select the track to be programmed. 3. Press the [PROG] button again to store the selection. Once stored, the speaker’s display will show “02.” NOTE: You may store up to 20 tracks in a program list. After entering a 20th track, the speaker’s display will show the programmed tracks in their correct sequence. At the end of the review, “01” on the speaker’s display and the program LED indicator will both flash. for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits Playing the Program List • Press the [ ] button to play/pause the program list. The program LED indicator will turn solid RED while playing. • Press the [PAIR/STOP] button to stop playback. • Press the [RPT] button once to repeat the track that is currently playing on the program list. Press the [RPT] button a SECOND TIME to repeat the entire program list. • To cancel and delete the programmed list, press the [PAIR/STOP] button TWICE or stop playback and open the CD door. ● Connect the equipment into an outlet on a circuit different from that to Editing the Program List The program list my be reviewed or edited, first press the [PAIR/STOP] button. 1. Press the [PROG] button. The speaker’s display will show “01” and the program LED indicator will both flash. 2. Move through the list of programmed tracks by pressing the [PROG] button, then use the [ ] or [ ] buttons to select a new track and confirm with the [PROG] button. NOTE: Press the [PAIR/STOP] button to cancel editing. Using the Auxiliary Input To use the speaker’s auxiliary input, insert a 3.5mm auxiliary cable to the AUX-IN port on the side of the speaker. Move the [MAIN] switch to the CD position and connect the other end of the 3.5mm cable to the headphone jack on your media playing device. The speaker will automatically switch to auxiliary mode once the device is plugged in. Use the controls on the connected device to control playback and volume adjustment. are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Legal Information Caution: Any changes or modifications not expressly approved could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 90 Days Limited Warranty In the unlikely event that this product is defective, or does not perform properly, you may within ninety (90) days from your original date of purchase return it to the authorized service center for repair or exchange. TO OBTAIN WARRANTY SERVICE: ● Call the Customer Support number located below, or go to our website portal to receive an SRO number. ● Provide proof of the date of purchase within the package (dated bill of sale). ● Prepay all shipping costs to the authorized service center, and remember to insure your return. ● Include a return shipping address (no P.O. Boxes), a telephone contact number, and the defective unit within the package. ● Describe the defect or reason you are returning the product. Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service center determines this product is defective. Products received damaged as a result of shipping will require you to file a claim with the carrier. The shipping address of the authorized service center is: Customer Service Dept. 36 c/o Southern Telecom 400 Kennedy Drive Sayreville NJ 08872 Should you have any questions or problems concerning this product, please contact our customer service department at: Customer Support: Phone: 1-877-768-8481 Monday-Friday 8AM-10PM(EST) www.southerntelecom.com Click on “Product Support” Warranty service not provided This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, and unauthorized modification. This warranty is voided in the event any unauthorized person opens, alters or repairs this product. All products being returned to the authorized service center for repair must be suitably packaged. Limitation of Warranty: • THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION GIVEN BY AIT, INC. IT’S AGENTS, OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY. • REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. AIT, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF NEW YORK. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limations on how long an implied warranty lasts so the above limitations on exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c014 79.156821, 2014/08/29-03:07:50 Format : application/pdf Title : AR4000CD_v1r_NO [DRAFT] Creator Tool : Adobe Illustrator CS5 Create Date : 2016:11:07 16:06:24-04:00 Modify Date : 2017:04:06 13:51:31+08:00 Metadata Date : 2017:04:06 13:51:31+08:00 Thumbnail Width : 256 Thumbnail Height : 160 Thumbnail Format : JPEG Thumbnail Image : (Binary data 17277 bytes, use -b option to extract) Document ID : xmp.did:4C650C9324A5E61190ACFAD8698B25E2 Instance ID : uuid:1a45ca5a-fc29-411b-8be2-b4b330437a8c Original Document ID : uuid:3F07BBA8B377DE119111A0FD5746865B Rendition Class : proof:pdf Derived From Instance ID : uuid:16f858de-aa97-4d41-8a88-97450badc6bd Derived From Document ID : xmp.did:DA03D118D6A1E611BDB5820D196FACEB Derived From Original Document ID: uuid:3F07BBA8B377DE119111A0FD5746865B Derived From Rendition Class : proof:pdf History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:272692AD95E3DF118946E8C8DCA382AE, xmp.iid:d3edd66f-84f5-1849-b278-5f7c3c134af9, xmp.iid:9E70CAB68452E6118D76CDF15C897801, xmp.iid:035E4955AB52E6118721800DDB38C213, xmp.iid:045E4955AB52E6118721800DDB38C213, xmp.iid:075E4955AB52E6118721800DDB38C213, xmp.iid:AE4B991C2254E611835FBB25CE6ED7C6, xmp.iid:62B75AB7165BE611B99F8DEB9BE2E1A9, xmp.iid:E949BA2E8064E61191B5C5F1C27389A1, xmp.iid:9E5943053969E611B6A5A553C2BDA202, xmp.iid:A4DB95E37C9FE611AE5C9D5BCCC57E57, xmp.iid:DA03D118D6A1E611BDB5820D196FACEB, xmp.iid:4C650C9324A5E61190ACFAD8698B25E2 History When : 2010:10:29 12:54:02-07:00, 2016:07:19 17:58:33-04:00, 2016:07:25 12:28:06-04:00, 2016:07:25 17:04:10-04:00, 2016:07:25 17:05:14-04:00, 2016:07:25 17:08:21-04:00, 2016:07:27 13:49:32-04:00, 2016:08:05 10:25:31-04:00, 2016:08:17 11:07:04-04:00, 2016:08:23 09:54:17-04:00, 2016:10:31 14:54:40-04:00, 2016:11:03 14:40:03-04:00, 2016:11:07 16:06:21-05:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CC 2015 (Windows), Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5 History Changed : /, /, /, /, /, /, /, /, /, /, /, /, / Startup Profile : Print N Pages : 1 Has Visible Transparency : True Has Visible Overprint : False Max Page Size W : 66.787519 Max Page Size H : 42.443404 Max Page Size Unit : Centimeters Font Name : ArialMT, Arial-BoldMT, HelveticaNeueLT-Light, MyriadPro-It, MyriadPro-Regular, MyriadPro-Bold, MyriadPro-BoldIt, TimesNewRomanPSMT, Wingdings-Regular, AdobeSongStd-Light, Myriad-Roman, UniversCE-Light, Myriad-Bold Font Family : Arial, Arial MT, HelveticaNeue LT 45 Light, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Times New Roman, Wingdings, Adobe 宋体 Std, Myriad, UniversCE Light, Myriad Bold Font Face : Regular, Bold, Regular, Italic, Regular, Bold, Bold Italic, Regular, Regular, L, Roman, Light, Bold Font Type : Open Type, Open Type, TrueType, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Unknown, Unknown Font Version : Version 6.85, 001.001, Version 6.1; 2002, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 6.85, Version 5.00, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, 001.000, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329 Font Composite : False, False, False, False, False, False, False, False, False, False, False, False, False Font File Name : arial.ttf, Arial-BoldMT_0.otf, Helvetica LT 45 Light_0.ttf, MyriadPro-It.otf, MyriadPro Regular.otf, MyriadPro-Bold.otf, MyriadPro-BoldIt.otf, times.ttf, wingding.ttf, AdobeSongStd-Light.otf, myriad roman.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE Cool Gray 11 C, PANTONE 123 C, PANTONE Black C, PANTONE 286 C Swatch Groups Group Name : 默认色板组 Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: PANTONE 431 C Swatch Groups Colorants Type : SPOT Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Cyan : 11.000000 Swatch Groups Colorants Magenta : 1.000000 Swatch Groups Colorants Yellow : 0.000000 Swatch Groups Colorants Black : 63.999999 Producer : Adobe PDF library 9.90 Page Count : 1 Creator : Adobe Illustrator(R) 17.0 For : Administrator, Bounding Box : 142 -1150 1943 -23 Container Version : 11 Creator Version : 18EXIF Metadata provided by EXIF.tools