MET METYH823 TOWER with Color Changing Lights and Bluetooth Wireless Technology User Manual CHT823 IM R4 size 141x210mm

MET INDUSTRIAL LTD TOWER with Color Changing Lights and Bluetooth Wireless Technology CHT823 IM R4 size 141x210mm

Users Manual

Size: 148.5(W) x 210(H)mm (A5)
18. (Volume Down) Button9. (Volume Up) Button10. Button11. - LED ON/OFF Button12. Button13. ButtonLOCATION OF CONTROLS:FCC NOTICE:FCC WARNING:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:To assure continued operation, follow the attached installation instructions and use only shield cableswhen connecting to other devices. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.4 5 6 78 9 10 11 12 13 1. Carry Handle2. Speakers with Decorative LED Lights3. Decorative LED Lights4. Indicator5. DC IN Jack (Micro USB Port, for charge only)6. AUX (IN) Jack7. Mode Indicators321The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
To Personal Computer orUSB Charger (Not included)2BT (Bluetooth) pairing:POWER SOURCE:The unit has a built-in Li-ion rechargeable battery, recharge it before first time use or when it is drained as follows:Connect the Micro USB Plug from the supplied USB Connection Cable to the Micro USB Port on the top of the unit.Connect the full sized USB Plug from the supplied USB Connection Cable to any Computer or USB Charger (Computer and USB Charger not included) to start charging as the the illustrated below: First time use or re-pairing the unit to a new BT Device, pair as follows:1. Press the Button on the top of unit to turn on the unit. The Blue indicator on the top of unit will illuminate and blink. 2. Power on the external BT Device and enter to BT searching mode. Start pairing following the onscreen instructions from the external BT Device. After paired, the unit will sound a prompt toneand the Blue Indicator will stop blinking.3. If pairing is complete you may now play music with your external BT Device.3. During charging, the Red Charging Indicator on the top of unit will illuminate. When finished, itwill turn off.Notes:During charging, you can also play and listen music at the same time.Your battery will last longer if you're following these simple guidelines for caring and storingA. Before first time use, charge it approximately 4 hours until the unit is fully charged.B. Recharge and store the unit within the temperature range of 5°C~35°C (40°F~95°F).Do not charge longer than 24 hours. Excessive charging or running the unit until battery fullydrains will damage battery. Battery life will be extended if you keep the battery fully charged.D. Battery life naturally shortens slowly over time.The rechargeable battery incorporated in this product is not user replaceable.To
3NOTE: When the Audio Connection Cable was inserted into the AUX (in) Jack. BT will be auto cut.Unplug the cable from the AUX (in) Jack before use BT. Pressing and holding the - LED ON/OFF Button to turn off the Decorative LED Lights; pressing and holding again to turn it on.6. When finished listening, pressing and holding the Button to shut off the unit.The BluetoothIndicator will turn off.Notes:When the external BT Device searched the unit, our model number “CHT823” will appear on the display of external BT Device.If while pairing you are asked for a code please try "0000" or "1234".Normal operation after pairing:1. Power on the external BT Device and enter to BT mode as usual.2. Power on the unit as previously instructed.The Blue indicator on the top of unit willilluminate and blink.3. Wait a few seconds until the unit is automatically paired to the external BT Device. The BlueIndicator will stop blinking.4. After pairing is complete you may now play music with your external BT Device.3. Power on and play the music on the connected Player as usual. (Make sure the volume level of theconnected Audio Player is turned to high level.)4. During playback: Press the Button on the top of unit to mute, press again to turn the sound back on. Press the or Buttons repeatedly to adjust volume level as desired. Pressing and holding the -LED ON/OFF Button to turn off the Decorative LED Lights;pressing and holding again to turn it on.5. When finished listening, pressing and holding the Button to shut off the unit. The Green Indicatorwill turn off.Press the Button on the top of unit to pause, press again to resume normal playback. Press the or Buttons repeatedly to adjust volume level as desired.Press the or Buttons repeatedly to skip tracks.AUX (in) :To listen from an external Audio Player such as a MP3 Player, Discman …etc.1. Connect one end of the supplied Audio Connection Cable to the AUX Out/Line Out/Phone Jack onthe external Audio Player.2. Power on the unit as previously instructed then connect the other end of the cable to the AUX (In)Jack on the top of unit as illustrated below. The unit will automatically switching to AUX (In) Modeand the color of the Blue Indicator on the top of unit will turn to Green.5. During playback:
4SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICECheck the following before requesting service:Can’t power onBattery drained Recharge the battery as page 2 No sound or sound weakVolume of the unit was set to minimum positionVolume level of the paired/connected device is in low levelVolume level too high Reduce the volume level by press the ButtonReduce the volume level of the connected/paired devicePair the external BT device to the unit as page 3Place the external BT device close to the unitVolume level of the connected/paireddevice too highThe external BT device had NOT paired to the unitThe external BT device too far from the unitRise the volume level of the paired/connected deviceIncrease the volume by press the ButtonSound distortionBT not functioningSYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTIONTROUBLESHOOTINGPACKAGE INCLUDES:Power source:---------------------------------- DC 3.7V, 1200mAh (4.4WH) rechargeable Li-ion BatteryRecharge by DC 5V through DC IN Jack (Micro USB Port) Impedance of the speakers:--------------- 2 x 5 W; 4 ohmAudio power:----------------------------------- 2 x 3 W (Total 6 W, RMS) BT Version:------------------------------------- 2.1BT Operation Distance:--------------------- 32 Feet in open area1 x Owner’s Manual 1 x USB Connection Cable (For charging only)1 x Audio Connection Cables with 3.5mm Plugs:
Craig warrants this product to be free from manufacturing defects in material andworkmanship under normal use for a period of 90 days from date of purchase. If serviceis required, please return the product to the store where it was purchased for exchange;or, pack the unit in the original packing material with all accessories if applicable, a copyof your sales receipt and a Cashier’s check or Money Order for $7 (to cover shippingand handling costs) payable to Craig Electronics Inc. For consumers in Canada, pleasemake sure that the cashier check or money order is redeemable through a U.S. bank.Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit cannot be repaired or replaced, a refund will be forwarded to you within four weeks of receiptof your unit. Please ship your unit to:Craig Electronics Inc.1160 NW 163 DriveMiami, Fl 33169This warranty is void if the product has been: a) Used in a commercial application or rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by anyone other than an authorized Craig service center. d) Damaged because it is improperly connected to any other equipment.Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s Manual which can be performed by the customer. b) Damage to equipment not properly connected to the product. c) Any cost incurred in shipping the product for repair. d) Damage to the product not used in the USA.This warranty is not transferable and only applies to the original purchase. Any implied warranties, including the warranty of merchantability, are limited in duration to the period of this expressed warranty and no warranty whether expressed or implied shall apply to the product thereafter.Under no circumstance shall Craig be liable for any loss or consequential damage arising out of the use of this product. This warranty gives specific legal rights. However, you may have other rights which may vary from state to state. Some states do not allow limitations on implied warranties or exclusion of consequential damage. Therefore, these restrictions may not apply to you.To Obtain Service on your Productemail:service@craigelectronics.comPrinted in China CHT823DG_WC_E0GZ1_B0WULIMITED WARRANTY

Navigation menu