MICROCHIP TECHNOLOGY A091784 ATMEGA256RFR2-XPRO User Manual Atmel ATMEGA256RFR2 Xplained Pro USER GUIDE

Download:
Mirror Download [FCC.gov]
Document ID	1974567
Application ID	jYK8DZ9bh870fEJLP5l2PA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	68.73kB (859142 bits)
Date Submitted	2013-05-24 00:00:00
Date Available	2013-05-27 00:00:00
Creation Date	2013-05-22 08:50:57
Producing Software	Apache FOP Version 1.1
Document Lastmod	0000-00-00 00:00:00
Document Title	Atmel ATMEGA256RFR2 Xplained Pro (USER GUIDE)
Document Creator	DocBook XSL Stylesheets with Apache FOP
Document Author:	Atmel Corporation

USER GUIDE
Atmel ATMEGA256RFR2 Xplained Pro
Preface
The Atmel® ATMEGA256RFR2 Xplained Pro evaluation kit is hardware platform
to evaluate the ATmega256RFR2 microcontroller.
Supported by the Atmel Studio integrated development platform, the kit provides
easy access to the features of the Atmel ATmega256RFR2 and explains how to
integrate the device in a customer design.
The Xplained Pro MCU series evaluation kits include an on-board Embedded
Debugger, and no external tools are necessary to program or debug the
ATmega256RFR2.
The Xplained Pro extension series evaluation kits offers additional peripherals to
extend the features of the board and ease the development of customer designs.
42079C-MCU-05/2013
Table of Contents
Preface .......................................................................................... 1
1. Introduction .............................................................................. 3
1.1.
1.2.
Features .............................................................................. 3
Kit overview ......................................................................... 3
2. Getting started ......................................................................... 5
2.1.
2.2.
2.3.
Quick-start ........................................................................... 5
Connecting the kit ................................................................. 5
Design documentation and related links ..................................... 5
3. Xplained Pro ............................................................................ 6
3.1.
3.2.
3.3.
3.4.
Embedded Debugger ............................................................. 6
Hardware identification system ................................................. 6
Power supply ....................................................................... 7
3.3.1.
Measuring ATmega256RFR2 power consumption ............ 7
Standard headers and connectors ............................................ 7
3.4.1.
Xplained Pro extension header .................................... 7
3.4.2.
Power header ........................................................... 8
4. Hardware user guide .............................................................. 9
4.1.
4.2.
4.3.
Connectors .......................................................................... 9
4.1.1.
I/O extension headers ................................................ 9
4.1.2.
Other headers ........................................................ 12
Peripherals ......................................................................... 13
4.2.1.
Crystals ................................................................. 13
4.2.2.
Mechanical buttons .................................................. 13
4.2.3.
LED ...................................................................... 13
4.2.4.
RF ........................................................................ 13
4.2.5.
Temperature sensor ................................................. 14
Embedded Debugger implementation ...................................... 14
4.3.1.
JTAG ..................................................................... 14
4.3.2.
Virtual COM port ..................................................... 15
4.3.3.
Atmel Data Gateway Interface ................................... 15
5. Agency Certification .............................................................. 16
5.1.
5.2.
5.3.
UNITED STATES (FCC) ....................................................... 16
European Union (ETSI) ........................................................ 16
List of Antennae tested with this product: ................................. 17
6. Hardware revision history and known issues ........................ 18
6.1.
6.2.
Identifying product ID and revision .......................................... 18
Revision 3 .......................................................................... 18
7. Document revision history ..................................................... 19
8. Evaluation board/kit important notice .................................... 20
Atmel ATMEGA256RFR2 Xplained Pro [USER GUIDE]
42079C-MCU-05/2013
1.
Introduction
1.1
Features
●
Atmel® ATmega256RFR2 microcontroller
●
Embedded Debugger (EDBG)
●
●
1.2
●
USB interface
●
Programming and debugging (target) through JTAG
●
Virtual COM-port interface to target via UART
●
Atmel Data Gateway Interface (DGI) to target via SPI or TWI
●
Four GPIOs connected to target for code instrumentation
Digital I/O
●
Two mechanical buttons (user and reset button)
●
One user LED
●
Five extension headers
Antenna
●
One ceramic chip antenna (2450BM15A0015E)
●
One SMA connector for external antenna
●
Temperature sensor and EEPROM (AT30TSE758)
●
Two possible power sources
●
External power
●
Embedded debugger USB
●
16MHz crystal
●
32kHz crystal
Kit overview
The Atmel ATMEGA256RFR2 Xplained Pro evaluation kit is a hardware platform to evaluate the Atmel
ATmega256RFR2.
The kit offers a set of features that enables the ATmega256RFR2 user to get started using the
ATmega256RFR2 peripherals right away and to get an understanding of how to integrate the device in their
own design.
Atmel ATMEGA256RFR2 Xplained Pro [USER GUIDE]
42079C-MCU-05/2013
Figure 1-1. ATMEGA256RFR2 Xplained Pro evaluation kit overview.
Atmel ATMEGA256RFR2 Xplained Pro [USER GUIDE]
42079C-MCU-05/2013
2.
Getting started
2.1
Quick-start
3 Steps to start exploring the Atmel Xplained Pro Platform
2.2
●
Download and install Atmel Studio .
●
Launch Atmel Studio.
●
Connect an USB cable to the DEBUG USB port.
Connecting the kit
When connecting Atmel ATMEGA256RFR2 Xplained Pro to your computer for the first time, the operating
system will do a driver software installation. The driver file supports both 32-bit and 64-bit versions of
Microsoft® Windows® XP and Windows 7.
Once connected the green power LED will be lit and Atmel Studio will autodetect which Xplained Pro
evaluation- and extension kit(s) that's connected. You'll be presented with relevant information like datasheets
and kit documentation. You also have the option to launch Atmel Software Framework (ASF) example
applications. The target device is programmed and debugged by the on-board Embedded Debugger and no
external programmer or debugger tool is needed. Please refer to the Atmel Studio user guide for information
regarding how to compile and program the kit.
2.3
Design documentation and related links
The following list contains links to the most relevant documents and software for the ATMEGA256RFR2
Xplained Pro.
1.
Xplained Pro products - Atmel Xplained Pro is a series of small-sized and easy-to-use evaluation kits
for 8- and 32-bit Atmel microcontrollers. It consists of a series of low cost MCU boards for evaluation and
demonstration of features and capabilities of different MCU families.
2.
ATMEGA256RFR2 Xplained Pro User Guide - PDF version of this User Guide.
3.
ATMEGA256RFR2 Xplained Pro Design Documentation - Package containing schematics, BOM,
assembly drawings, 3D plots, layer plots etc.
4.
Atmel Studio - Free Atmel IDE for development of C/C++ and assembler code for Atmel
microcontrollers.
5.
IAR Embedded Workbench® for Atmel AVR®. This is a commercial C/C++ compiler that is available
for 8-bit AVR. There is a 30 day evaluation version as well as a 4k code size limited kick-start version
available from their website.
6.
Atmel sample store - Atmel sample store where you can order samples of devices.
http://www.atmel.com/atmelstudio
http://www.atmel.com/atmelstudio
http://www.atmel.com/XplainedPro
http://www.atmel.com/Images/Atmel-42079-ATMEGA256RFR2-Xplained-Pro_User-Guide.pdf
http://www.atmel.com/Images/Atmel-42079-ATMEGA256RFR2-Xplained-Pro_User-Guide.zip
http://www.atmel.com/atmelstudio
http://www.iar.com/en/Products/IAR-Embedded-Workbench/AVR/
http://www.atmel.com/system/samplesstore
Atmel ATMEGA256RFR2 Xplained Pro [USER GUIDE]
42079C-MCU-05/2013
3.
Xplained Pro
Xplained Pro is an evaluation platform that provides the full Atmel microcontroller experience. The platform
consists of a series of Microcontroller (MCU) boards and extension boards that are integrated with Atmel
Studio, have Atmel Software Framework (ASF) drivers and demo code, support data streaming and more.
Xplained Pro MCU boards support a wide range of Xplained Pro extension boards that are connected through
a set of standardized headers and connectors. Each extension board has an identification (ID) chip to uniquely
identify which boards are mounted on a Xplained Pro MCU board. This information is used to present relevant
user guides, application notes, datasheets and example code through Atmel Studio. Available Xplained Pro
MCU and extension boards can be purchased in the Atmel Web Store .
3.1
Embedded Debugger
The ATMEGA256RFR2 Xplained Pro contains the Atmel® Embedded Debugger (EDBG) for on-board
debugging. The EDBG is a composite USB device of 3 interfaces; a debugger, Virtual COM Port and Data
Gateway Interface (DGI).
In conjunction with Atmel Studio, the EDBG debugger interface can program and debug the ATmega256RFR2.
On the ATMEGA256RFR2 Xplained Pro, the JTAG interface is connected between the EDBG and the
ATmega256RFR2.
The Virtual COM Port is connected to a UART port on the ATmega256RFR2 (see section “Embedded
Debugger implementation” on page 14 for pinout), and provides an easy way to communicate with the target
application through a simple terminal software. It offers variable baud rate, parity and stop bit settings. Note
that the settings on the target device UART must match the settings given in the terminal software.
The DGI consists of several physical data interfaces for communication with the host computer. Please,
see section “Embedded Debugger implementation” on page 14 for available interfaces and pinout.
Communication over the interfaces are bidirectional. It can be used to send events and values from the
ATmega256RFR2, or as a generic printf-style data channel. Traffic over the interfaces can be timestamped
on the EDBG for more accurate tracing of events. Note that timestamping imposes an overhead that reduces
maximal throughput. The DGI uses a proprietary protocol, and is thus only compatible with Atmel Studio.
The EDBG controls two LEDs on ATMEGA256RFR2 Xplained Pro, a power LED and a status LED. Table 3-1,
“EDBG LED control” shows how the LEDs are controlled in different operation modes.
Table 3-1. EDBG LED control
Operation mode
Power LED
Status LED
Normal operation
Power LED is lit when power is
applied to the board.
Activity indicator, LED flashes
every time something happens on
the EDBG.
Bootloader mode (idle)
The power LED and the status LED blinks simultaneously.
Bootloader mode (firmware
upgrade)
The power LED and the status LED blinks in an alternating pattern.
For further documentation on the EDBG, see the EDBG User Guide.
3.2
Hardware identification system
All Xplained Pro compatible extension boards have an Atmel ATSHA204 crypto authentication chip mounted.
This chip contains information that identifies the extension with its name and some extra data. When an
Xplained Pro extension board is connected to an Xplained Pro MCU board the information is read and sent
to Atmel Studio. The Atmel Kits extension, installed with Atmel Studio, will give relevant information, code
examples and links to relevant documents. Table 3-2, “Xplained Pro ID chip content” shows the data fields
stored in the ID chip with example content.
Table 3-2. Xplained Pro ID chip content
Data Field
Data Type
Example Content
Manufacturer
ASCII string
Atmel’\0’
Product Name
ASCII string
Segment LCD1 Xplained Pro’\0’
Product Revision
ASCII string
02’\0’
http://store.atmel.com/
Atmel ATMEGA256RFR2 Xplained Pro [USER GUIDE]
42079C-MCU-05/2013
3.3
Data Field
Data Type
Example Content
Product Serial Number
ASCII string
1774020200000010’\0’
Minimum Voltage [mV]
uint16_t
3000
Maximum Voltage [mV]
uint16_t
3600
Maximum Current [mA]
uint16_t
30
Power supply
The ATMEGA256RFR2 Xplained Pro kit can be powered either by USB or by an external power source through
the 4-pin power header, marked PWR. This connector is described in “Power header” on page 8. The
available power sources and specifications are listed in Table 3-3, “Power sources for ATMEGA256RFR2
Xplained Pro”.
Table 3-3. Power sources for ATMEGA256RFR2 Xplained Pro
Power input
Voltage requirements
Current requirements
Connector marking
External power
4.3V to 5.5V
Recommended
minimum is 500mA
to be able to provide
enough current
for extentions and
the board itself.
Recommended
maximum is 2A due
to the input protection
maximum current
specification.
PWR
Embedded debugger
USB
4.4V to 5.25V
(according to USB spec)
500 mA (according to
USB spec)
DEBUG USB
The kit will automatically detect which power sources are available and choose which one to use according to
the following priority:
3.3.1
1.
External power
2.
Embedded debugger USB
Measuring ATmega256RFR2 power consumption
As part of an evaluation of the ATmega256RFR2 it can be of interest to measure its power consumption.
Because the device has a separate power plane (VCC_MCU_P3V3) on this board it is possible to measure the
current consumption by measuring the current that is flowing into this plane. The VCC_MCU_P3V3 plane is
connected via a jumper to the main power plane (VCC_TARGET_P3V3) and by replacing the jumper with an
ampere meter it is possible to determine the current consumption. To locate the current measurement header,
please refer to Figure 1-1, “ATMEGA256RFR2 Xplained Pro evaluation kit overview.”.
Warning
Do not power the board without having the jumper or an ampere meter mounted. This can cause
the ATmega256RFR2 to be powered through its I/O pins and cause undefined operation of the
device.
3.4
Standard headers and connectors
3.4.1
Xplained Pro extension header
All Xplained Pro kits have one or more dual row, 20 pin, 100mil extension headers. Xplained Pro MCU boards
have male headers while Xplained Pro extensions have their female counterparts. Note that all pins are
not always connected. However, all the connected pins follow the defined pin-out described in Table 3-4,
“Xplained Pro extension header”. The extension headers can be used to connect a wide variety of Xplained Pro
extensions to Xplained Pro MCU boards and to access the pins of the target MCU on Xplained Pro MCU board
directly.
Atmel ATMEGA256RFR2 Xplained Pro [USER GUIDE]
42079C-MCU-05/2013
Table 3-4. Xplained Pro extension header
Pin number
Name
Description
ID
Communication line to the ID chip on extension board.
GND
Ground
ADC(+)
Analog to digital converter , alternatively positive part of differential
ADC
ADC(-)
Analog to digital converter , alternatively negative part of
differential ADC
GPIO1
General purpose IO
GPIO2
General purpose IO
PWM(+)
Pulse width modulation , alternatively positive part of differential
PWM
PWM(-)
Pulse width modulation , alternatively positive part of differential
PWM
IRQ/GPIO
Interrupt request line and/or general purpose IO.
10
SPI_SS_B/GPIO
Slave select for SPI and/or general purpose IO.
11
TWI_SDA
Data line for two wire interface. Always implemented, bus type.
12
TWI_SCL
Clock line for two wire interface. Always implemented, bus type.
13
USART_RX
Receiver line of Universal Synchronous and Asynchronous serial
Receiver and Transmitter
14
USART_TX
Transmitter line of Universal Synchronous and Asynchronous
serial Receiver and Transmitter
15
SPI_SS_A
Slave select for SPI. Should be unique if possible.
16
SPI_MOSI
Master out slave in line of Serial peripheral interface. Always
implemented, bus type
17
SPI_MISO
Master in slave out line of Serial peripheral interface. Always
implemented, bus type
18
SPI_SCK
Clock for Serial peripheral interface. Always implemented, bus
type
19
GND
Ground
20
VCC
Power for extension board
3.4.2
Power header
The power header can be used to connect external power to the ATMEGA256RFR2 Xplained Pro kit. The
kit will automatically detect and switch to the external power if supplied. The power header can also be used
as supply for external peripherals or extension boards. Care must be taken not to exceed the total current
limitation of the on-board regulator for the 3.3V regulated output. To locate the current measurement header,
please refer to Figure 1-1, “ATMEGA256RFR2 Xplained Pro evaluation kit overview.”
Table 3-5. Power header PWR
Note
Pin number PWR header
Pin name
Description
VEXT_P5V0
External 5V input
GND
Ground
VCC_P5V0
Unregulated 5V (output, derived
from one of the input sources)
VCC_P3V3
Regulated 3.3V (output, used as
main power for the kit)
If the board is powered from a battery source it is recommended to use the PWR header. If there
is a power source connected to EDBG USB, the EDBG is activated and it will consume more
power.
Atmel ATMEGA256RFR2 Xplained Pro [USER GUIDE]
42079C-MCU-05/2013
4.
Hardware user guide
4.1
Connectors
This chapter describes the implementation of the relevant connectors and headers on ATMEGA256RFR2
Xplained Pro and their connection to the ATmega256RFR2. The tables of connections in this chapter also
describes which signals are shared between the headers and on-board functionality.
4.1.1
I/O extension headers
The ATMEGA256RFR2 Xplained Pro headers EXT1, EXT2, EXT3, EXT4 and EXT5 offers access to the I/O
of the microcontroller in order to expand the board e.g. by connecting extension modules to the board. These
headers all comply with the standard extension header specified in Xplained Pro Standard Extension Header.
All headers have a pitch of 2.54 mm.
Table 4-1. Extension header EXT1
Pin on EXT1
ATmega256RFR2 pin
Function
Communication line to
ID chip on extension
board.
GND
Shared functionality
PF0
ADC0
PF1
ADC1
PE2
GPIO
PE3
GPIO
PB5
OC1A
PB6
OC1B
PE5
GPIO / INT5
EXT4 header.
10
PD5
GPIO / SPI chip select B
EXT4 header.
11
PD1
TWI SDA
All EXT headers.
12
PD0
TWI SCL
All EXT headers.
13
PE0
UART0 RXD
All EXT headers.
EXT2, EXT3 and EXT5
connected through cutstrap.
14
PE1
UART0 TXD
All EXT headers.
EXT2, EXT3 and EXT5
connected through cutstrap.
15
PG0
GPIO / SPI chip select A
EXT4 header.
16
PB2
SPI MOSI
All EXT headers.
17
PB3
SPI MISO
All EXT headers.
18
PB1
SPI SCK
All EXT headers.
19
GND
20
VCC
EXT4 header.
Table 4-2. Extension header EXT2
Pin on EXT2
ATmega256RFR2 pin
Function
Communication line to
ID chip on extension
board.
GND
Shared functionality
Atmel ATMEGA256RFR2 Xplained Pro [USER GUIDE]
42079C-MCU-05/2013
Pin on EXT2
ATmega256RFR2 pin
Function
Shared functionality
PE6
GPIO / INT6
EXT5 header.
10
PD6
GPIO / SPI chip select B
EXT5 header.
11
PD1
TWI SDA
All other EXT headers.
12
PD0
TWI SCL
All other EXT headers.
UART0 RXD
All other EXT headers.
EXT2, EXT3 and EXT5
connected through cutstrap.
UART0 TXD
All other EXT headers.
EXT2, EXT3 and EXT5
connected through cutstrap.
13
PE0
14
PE1
15
PD4
GPIO / SPI chip select A
EXT5 header.
16
PB2
SPI MOSI
All other EXT headers.
17
PB3
SPI MISO
All other EXT headers.
18
PB1
SPI SCK
All other EXT headers.
19
GND
20
Notes:
VCC
Connected through cut-strap
Table 4-3. Extension header EXT3
Pin on EXT3
ATmega256RFR2 pin
Function
Communication line to
ID chip on extension
board.
GND
Shared functionality
PF3
GPIO
PG5
GPIO
PB7
GPIO
PE7
GPIO / INT7
10
PD7
GPIO / SPI chip select B
11
PD1
TWI SDA
All other EXT headers.
12
PD0
13
PE0
14
PE1
TWI SCL
All other EXT headers.
UART0 RXD
All other EXT headers.
EXT2, EXT3 and EXT5
connected through cutstrap.
UART0 TXD
All other EXT headers.
EXT2, EXT3 and EXT5
Atmel ATMEGA256RFR2 Xplained Pro [USER GUIDE]
42079C-MCU-05/2013
10
Pin on EXT3
ATmega256RFR2 pin
Function
15
PG4
GPIO / SPI chip select A
16
PB2
SPI MOSI
All other EXT headers.
17
PB3
SPI MISO
All other EXT headers.
18
PB1
SPI SCK
All other EXT headers.
19
GND
20
VCC
Notes:
Shared functionality
connected through cutstrap.
Connected through cut-strap
Table 4-4. Extension header EXT4
Pin on EXT4
ATmega256RFR2 pin
Function
Communication line to
ID chip on extension
board.
GND
Shared functionality
PB5
OC1A
EXT1 header.
PE5
GPIO / INT5
EXT1 header.
10
PG0
GPIO / SPI chip select B
EXT1 header.
11
PD1
TWI SDA
All other EXT headers.
12
PD0
TWI SCL
All other EXT headers.
13
PE0
UART0 RXD
All other EXT headers.
EXT2, EXT3 and EXT5
connected through cutstrap.
14
PE1
UART0 TXD
All other EXT headers.
EXT2, EXT3 and EXT5
connected through cutstrap.
15
PD5
GPIO / SPI chip select A
EXT1 header.
16
PB2
SPI MOSI
All other EXT headers.
17
PB3
SPI MISO
All other EXT headers.
18
PB1
SPI SCK
All other EXT headers.
19
GND
20
VCC
Table 4-5. Extension header EXT5
Pin on EXT5
ATmega256RFR2 pin
Function
Communication line to
ID chip on extension
board.
GND
Shared functionality
Atmel ATMEGA256RFR2 Xplained Pro [USER GUIDE]
42079C-MCU-05/2013
11
Pin on EXT5
ATmega256RFR2 pin
Function
Shared functionality
PE6
GPIO / INT6
EXT2 header.
10
PD4
GPIO / SPI chip select B
EXT2 header.
11
PD1
TWI SDA
All other EXT headers.
12
PD0
All other EXT headers.
UART0 RXD
All other EXT headers.
EXT2, EXT3 and EXT5
connected through cutstrap.
UART0 TXD
All other EXT headers.
EXT2, EXT3 and EXT5
connected through cutstrap.
13
PE0
14
PE1
15
PD6
GPIO / SPI chip select A
EXT2 header.
16
PB2
SPI MOSI
All other EXT headers.
17
PB3
SPI MISO
All other EXT headers.
18
PB1
SPI SCK
All other EXT headers.
19
GND
20
Notes:
4.1.2
TWI SCL
VCC
Connected through cut-strap
Other headers
In addition to the “I/O extension headers” on page 9, ATMEGA256RFR2 Xplained Pro has additionally two
headers with spare signals which offers access to the I/O of the microcontroller which are otherwise not easily
available elsewhere or might be favourable to have collected toghether. All headers have a pitch of 2.54mm.
Table 4-6. SPARE ADC signals header
Pin on header
ATmega256RFR2
pin
Function
VCC (3.3V)
PF4
ADC4
PF5
PF6
Notes:
PF7
Shared functionality
JTAG Interface, TCK
JTAG Interface, TMS
JTAG Interface, TDO
JTAG Interface, TDI
ADC5
ADC6
ADC7
These lines are connected to the JTAG interface, and ADC will not work properly while debugging or programming the kit.
Table 4-7. SPARE signals header 2
Pin on header
ATmega256RFR2
pin
Function
AREF
Analog reference
TST
Test pin for RF test
mode
RSTN
Reset
RSTON
Reset status
CLKI
Alternative main
clock input
Shared functionality
EDBG and RESET button
Atmel ATMEGA256RFR2 Xplained Pro [USER GUIDE]
42079C-MCU-05/2013
12
Pin on header
ATmega256RFR2
pin
4.2
Peripherals
4.2.1
Crystals
Function
Shared functionality
GND
The ATMEGA256RFR2 Xplained Pro kit contains two crystals that can be used as clock sources for the
ATmega256RFR2 device. Each crystal has a cut-strap next to it that can be used to measure the oscillator
allowance. This is done by cutting the strap and adding a resistor across the strap. More information about
oscillator allowance and safety factor can be found in appnote AVR4100
Table 4-8. External 32.768kHz crystals
Pin on ATmega256RFR2
Function
PG3
TOSC2, crystal output
PG4
TOSC1, crystal input
Table 4-9. External 16MHz crystals
4.2.2
Pin on ATmega256RFR2
Function
XTAL1
Crystal input
XTAL2
Crystal output
Mechanical buttons
ATMEGA256RFR2 Xplained Pro contains two mechanical buttons. One button is the RESET button connected
to the ATmega256RFR2 reset line and the other is a generic user configurable button. When a button is
pressed it will drive the I/O line to GND.
Table 4-10. Mechanical buttons
4.2.3
Pin on ATmega256RFR2
Silkscreen text
RSTN
RESET
PE4
SW0
LED
There is one yellow LED available on the ATMEGA256RFR2 Xplained Pro board that can be turned on and off.
The LED can be activated by driving the connected I/O line to GND.
Table 4-11. LED connections
4.2.4
Pin on ATmega256RFR2
LED
PB4
Yellow LED
RF
The main feature of ATMEGA256RFR2 Xplained Pro is to show the RF capability of the ATmega256RFR2
device. This device has bidirectional differential antenna pins, which are fed through a balun (Johanson
Technology, 2450BM15A0015 ) to create a single unbalanced output/input. This kit has a passive analog RF
switch (Skyworks Solutions Inc, AS222-92LF ) connected to the unbalanced output of the balun. The switch
is driven by the DIG1 and DIG2 pins of the ATmega256RFR2 which feature Antenna Diversity to enable the
device to automatically select the best signal from two antennas (can also be selected manually). The output
of the switch is connected to a ceramic chip antenna (Johanson Technology, 2540AT18D0100 ) and a SMA
connector for external antennas.
http://www.atmel.com/images/doc8333.pdf
http://www.johansontechnology.com/datasheets/balun-filter/2450BM15A0015.pdf
http://www.skyworksinc.com/uploads/documents/200252C.pdf
http://www.johansontechnology.com/images/stories/ip/rf-antennas/Antenna_2450AT18D0100_v3.pdf
Atmel ATMEGA256RFR2 Xplained Pro [USER GUIDE]
42079C-MCU-05/2013
13
Table 4-12. RF connections
Pin on ATmega256RFR2
4.2.5
RFP
RF balanced output (Positive)
RFN
RF balanced output (Negative)
Temperature sensor
ATMEGA256RFR2 Xplained Pro features an Atmel AT30TSE758 temperature sensor chip with an 8kbit
serial EEPROM inside. The sensor includes programmable high and low temperature alarms, user-selectable
temperature resolution up to 12 bits, and an I2C/SMBus™ compatible serial interface.
Table 4-13. Temperature sensor connections.
AT30TSE758
temperature
sensor pin
Pin name
Pin on
Comment
ATmega256RFR2
SDA
PD1
Data line of serial interface
SCL
PD0
Clock line of serial interface
ALERT
NC
GND
GND
A2
Addres line for serial interface, by default pulled low
A1
Addres line for serial interface, by default pulled high
A0
Addres line for serial interface, by default pulled high
VCC
VCC
Notes:
Temperature alarm signalling pin
Alert pin is available on a testpoint hole close to the sensor.
The temperature sensor has two TWI addresses, one for the temperature sensor and one for the EEPROM.
The addresses are "0b1001 A2 A1 A0" for the temperature sensor and "0b1010 A2 A1 A0" for the EEPROM.
The address selection lines (A2, A1 and A0) of the temperature sensor chip is by default pulled high for A0 and
A1 and low for A2, through 100kΩ resistors, which makes the default addresses 0b1001011 and 0b1010011.
Soldering the the straps on the front of the ATMEGA256RFR2 Xplained Pro board for An will alter that bit in
the address to low or high. Each strap is marked in silkscreen with A0, A1 and A2 as shown in Figure 4-1,
“Temperature sensor TWI address.”. When communicating with the EEPROM, part of the TWI address is used
as a page address, for more details see the device datasheet .
Figure 4-1. Temperature sensor TWI address.
4.3
Embedded Debugger implementation
The ATMEGA256RFR2 Xplained Pro contains an Embedded Debugger (EDBG) that can be used to
program and debug the ATmega256RFR2 using JTAG. The Embedded Debugger also include a Virtual Com
port interface over UART, an Atmel Data Gateway Interface over SPI and TWI and it monitors four of the
ATmega256RFR2 GPIOs. Atmel Studio can be used as a front end for the Embedded Debugger.
4.3.1
JTAG
The JTAG use five pins to communicate with the target. For further information on how to use the programming
and debugging capabilities of the EDBG, see “Embedded Debugger” on page 6.
http://www.atmel.com/Images/doc8751.pdf
Atmel ATMEGA256RFR2 Xplained Pro [USER GUIDE]
42079C-MCU-05/2013
14
Table 4-14. JTAG connections.
4.3.2
Pin on ATmega256RFR2
Function
PF4
JTAG TCK
PF5
JTAG TMS
PF6
JTAG TDO
PF7
JTAG TDI
RSTN
RESET
Virtual COM port
The Embedded Debugger act as a Virtual Com Port gateway by using one of the ATmega256RFR2 UARTs.
For further information on how to use the Virtual COM port see “Embedded Debugger” on page 6.
Table 4-15. Virtual COM port connections.
4.3.3
Pin on ATmega256RFR2
Function
PD2
UART RXD (ATmega256RFR2 RX line)
PD3
UART TXD (ATmega256RFR2 TX line)
Atmel Data Gateway Interface
The Embedded Debugger features an Atmel Data Gateway Interface (DGI) by using either a SPI or TWI
port. The DGI can be used to send a variety of data from the ATmega256RFR2 to the host PC. For further
information on how to use the DGI interface see “Embedded Debugger” on page 6.
Table 4-16. DGI interface connections when using SPI.
Pin on ATmega256RFR2
Function
PB0
Slave select (ATmega256RFR2 is Master)
PB1
SPI SCK (Clock Out)
PB2
SPI MOSI (Master Out, Slave in)
PB3
SPI MISO (Master In, Slave Out)
Table 4-17. DGI interface connections when using TWI.
Pin on ATmega256RFR2
Function
PD0
SCL (Clock line)
PD1
SDA (Data line)
Four GPIO lines are connected to the Embedded Debugger. The EDBG can monitor these lines and time
stamp pin value changes. This makes it possible to accurately time stamp events in the ATmega256RFR2
application code. For further information on how to configure and use the GPIO monitoring features see
“Embedded Debugger” on page 6.
Table 4-18. GPIO lines connected to the EDBG.
Pin on ATmega256RFR2
Function
PE2
GPIO0
PE3
GPIO1
PE5
GPIO2
PE6
GPIO3
Atmel ATMEGA256RFR2 Xplained Pro [USER GUIDE]
42079C-MCU-05/2013
15
5.
Agency Certification
5.1
UNITED STATES (FCC)
This equipment complies with Part 15 of the FCC rules and regulations. To fulfill FCC Certification
requirements, an OEM manufacturer must comply with the following regulations:
1.
Important
This equipment (ATMEGA256RFR2 Xplained Pro) is for use for evaluation purposes only and must not be
incorporated into any other device or system.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation (FCC
15.19).
The internal / external antenna(s) used for this mobile transmitter must provide a separation distance of at
least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or
transmitter.
Installers must be provided with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance. This device is approved as a mobile device with respect to RF exposure
compliance, and may only be marketed to OEM installers. Use in portable exposure conditions (FCC 2.1093)
requires separate equipment authorization.
Important
Modifications not expressly approved by this company could void the user's authority to operate
this equipment (FCC section 15.21).
Important
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense
(FCC section 15.105).
5.2
European Union (ETSI)
The ATMEGA256RFR2 Xplained Pro Evaluation kits has been certified for use in European Union countries. A
Declaration of Conformity must be issued for each of these standards and kept on file as described in Annex II
of the R&TTE Directive.
Furthermore, the manufacturer must maintain a copy of the modules' documentation and ensure the final
product does not exceed the specified power ratings, antenna specifications, and/or installation requirements
as specified in the user manual. If any of these specifications are exceeded in the final product, a submission
must be made to a notified body for compliance testing to all required standards.
Atmel ATMEGA256RFR2 Xplained Pro [USER GUIDE]
42079C-MCU-05/2013
16
Important
The 'CE' marking must be affixed to a visible location on the OEM product. The CE mark shall
consist of the initials "CE" taking the following form:
●
The CE marking must have a height of at least 5mm except where this is not possible on
account of the nature of the apparatus.
●
The CE marking must be affixed visibly, legibly, and indelibly.
More detailed information about CE marking requirements you can find at "DIRECTIVE 1999/5/
EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL" on 9 March 1999 at section 12.
5.3
List of Antennae tested with this product:
Table 5-1. List of tested Antennae
Antenna Number
Make
Model/Part #
Antenna Gain
(dBi)
Type of Antenna
Antenna 1
Johanson
Technology
2450AT18D0100
1.5dBi
Ceramic Antenna
Antenna 2
Techfun Co., Ltd
M01-SS2
0dBi
External Antenna
Atmel ATMEGA256RFR2 Xplained Pro [USER GUIDE]
42079C-MCU-05/2013
17
6.
Hardware revision history and known issues
6.1
Identifying product ID and revision
The revision and product identifier of Xplained Pro boards can be found in two ways, through Atmel Studio or
by looking at the sticker on the bottom side of the PCB.
By connecting a Xplained Pro MCU board to a computer with Atmel Studio running, an information window will
pop up. The first 6 digits of the serial number, which is listed under kit details, contain the product identifier and
revision. Information about connected Xplained Pro extension boards will also appear in the Atmel Kits window.
The same information can be found on the sticker on the bottom side of the PCB. Most kits will print the
identifier and revision in plain text as A09-nnnn\rr where nnnn is the identifier and rr is the revision. Boards with
limited space have a sticker with only a QR-code which contains a serial number string.
The serial number string has the following format:
"nnnnrrssssssssss"
n = product identifier
r = revision
s = serial number
The kit identifier for ATMEGA256RFR2 Xplained Pro is 1784.
6.2
Revision 3
Revision 3 of ATMEGA256RFR2 Xplained Pro is the initial released version.
Known issues
●
The low and high byte of the 16-bit CRC value of the information in the user page might be swapped on
serial numbers prior to 1885.
Workaround: If it is neccssary to use the CRC value to verify the data in the user page, compare the
calculated value with both the swapped and non-swapped version of the CRC value present in the user
page.
Atmel ATMEGA256RFR2 Xplained Pro [USER GUIDE]
42079C-MCU-05/2013
18
7.
Document revision history
Doc. Rev.
Date
Comment
21.05.2013
Added chapter 5.3: "Antennae tested with this product"
24.04.2013
Added Agency Certification chapter
25.02.2013
First release
Atmel ATMEGA256RFR2 Xplained Pro [USER GUIDE]
42079C-MCU-05/2013
19
8.
Evaluation board/kit important notice
This evaluation board/kit is intended for use for FURTHER ENGINEERING, DEVELOPMENT,
DEMONSTRATION, OR EVALUATION PURPOSES ONLY. It is not a finished product and may not (yet)
comply with some or any technical or legal requirements that are applicable to finished products, including,
without limitation, directives regarding electromagnetic compatibility, recycling (WEEE), FCC, CE or UL
(except as may be otherwise noted on the board/kit). Atmel supplied this board/kit "AS IS," without any
warranties, with all faults, at the buyer's and further users' sole risk. The user assumes all responsibility
and liability for proper and safe handling of the goods. Further, the user indemnifies Atmel from all claims
arising from the handling or use of the goods. Due to the open construction of the product, it is the user's
responsibility to take any and all appropriate precautions with regard to electrostatic discharge and any other
technical or legal concerns.
EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER USER NOR
ATMEL SHALL BE LIABLE TO EACH OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES.
No license is granted under any patent right or other intellectual property right of Atmel covering or relating
to any machine, process, or combination in which such Atmel products or services might be or are used.
Mailing Address:
Atmel Corporation
1600 Technology Drive
San Jose, CA 95110
USA
Atmel ATMEGA256RFR2 Xplained Pro [USER GUIDE]
42079C-MCU-05/2013
20
Atmel Corporation
1600 Technology Drive, San Jose, CA 95110 USA
T: (+1)(408) 441.0311
F: (+1)(408) 436.4200
www.atmel.com
© 2013 Atmel Corporation. All rights reserved. / Rev.: 42079C-MCU-05/2013
Atmel®, Atmel logo and combinations thereof, Enabling Unlimited Possibilities®, AVR, and others are registered trademarks or trademarks of Atmel
Corporation or its subsidiaries. Windows is a registered trademark of Microsoft Corporation in U.S. and or other countries. Other terms and product
names may be trademarks of others.
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted
by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE,
ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR
ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to
specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise,
Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended
to support or sustain life.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Page Count                      : 21
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Language                        : en
Format                          : application/pdf
Title                           : Atmel ATMEGA256RFR2 Xplained Pro (USER GUIDE)
Creator                         : Atmel Corporation
Date                            : 2013:05:22 08:50:57+02:00
Create Date                     : 2013:05:22 08:50:57+02:00
Creator Tool                    : DocBook XSL Stylesheets with Apache FOP
Metadata Date                   : 2013:05:22 08:50:57+02:00
Keywords                        : Atmel, ATMEGA256RFR2 Xplained Pro, Xplained Pro, User Guide, Extension, AT30TSE758, 2450BM15A0015E, 2540AT18D0100, AS222-92LF
PDF Version                     : 1.4
Producer                        : Apache FOP Version 1.1
Page Mode                       : UseOutlines
Author                          : Atmel Corporation

EXIF Metadata provided by EXIF.tools