MIELE Dishwasher Manual L0604160
User Manual: MIELE MIELE Dishwasher Manual MIELE Dishwasher Owner's Manual, MIELE Dishwasher installation guides
Open the PDF directly: View PDF 
.
Page Count: 60
| Download | |
| Open PDF In Browser | View PDF |
Operating
instructions
/i
Optima Series
G 1470
G 2470
To prevent accidents
and machine damage
read these instructions
before
installation or use.
HG03
M.-Nr. 06 696 060
Contents
iMPORTANT SAFETY iNSTRUCTiONS
.................................
Guide to the dishwasher ............................................
4
7
Caring for the environment ..........................................
9
Before using for the first time .......................................
To open the door ..................................................
To close the door ..................................................
10
10
10
Water softener ....................................................
11
Checking the water hardness ........................................
Filling the salt container .............................................
Salt indicator .....................................................
11
12
13
Rinse aid ........................................................
14
Adding rinse aid ..................................................
Rinse aid indicator .................................................
14
15
Adjusting the dosage ...............................................
15
Loading the dishwasher ...........................................
Items not recommended for dishwashing ...............................
Cutlery tray .......................................................
16
17
18
Cutlery basket ....................................................
Upper basket .....................................................
Adjusting the upper basket ..........................................
Lower basket .....................................................
19
20
22
23
Lower basket inserts ..............................................
24
Basket accessories
26
...............................................
Use ............................................................
27
Adding detergent ..................................................
Turning on .......................................................
28
29
Selecting and starting a program
29
.....................................
Program guide ...................................................
Use ............................................................
30
31
Time display ......................................................
Glasscare indicator ................................................
31
31
At the end of a program .............................................
Interrupting a program ..............................................
Changing a program ...............................................
31
32
32
Contents
Additional options ................................................
33
Detergent settings .................................................
Delay start .......................................................
Buzzer ..........................................................
33
34
35
Default setting ....................................................
35
Frequently asked questions ........................................
Technical faults ...................................................
36
36
Problems water intake/drain
38
.........................................
General problems with the dishwasher .................................
Sounds ..........................................................
39
40
Poor cleaning results ...............................................
After sales service ................................................
41
44
Transport
.......................................................
User Maintenance instructions ......................................
45
47
Cleaning and Care ................................................
Triple filter system .................................................
Cleaning the spray arms ............................................
Cleaning the water inlet filter .........................................
48
49
51
52
Cleaning the drain pump and non-return valve ...........................
Installation instructions ...........................................
53
55
Help to protect the environment .....................................
Electrical connection ..............................................
56
57
Plumbing ........................................................
Connection to the water supply .......................................
Drainage ........................................................
58
58
59
iMPORTANT SAFETY iNSTRUCTiONS
WARNING When using your dishwasher, follow
basic precautions, including the
following:
Read all instructions before
installation or use of the dishwasher
to prevent injury and machine
damage.
Electrical
Safety
Before
installation,
make sure
thaton
the
voltage
and frequency
listed
the data plate correspond with the
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubt.
Before installation or service,
disconnect the power supply to the
work area by unplugging the unit,
iiiiii!,,,,
,,¸.............................................................................................................................
................................
"tripping" the circuit breaker or
removing the fuse.
responsible for damage or injury
caused by improper use of this
Do
not use
extension tocord to
i appliance.
he manufacturer cannot be held
connect
thisanappliance
electricity. Extension cords do not
guarantee the required safety of the
appliance (e.g. danger of overheating).
intended purpose. This appliance is
i intended
se the dishwasher
for residential
onlyuse
for only.
its
Be
certaininstalled
your appliance
is
properly
and grounded
by
Keep these operating instructions in
a qualified technician. To guarantee the
a safe place and pass them on to
electrical safety of this appliance
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system of
the house checked by a qualified
electrician. The manufacturer cannot be
held responsible for damages caused
by the lack, or inadequacy, of an
effective grounding system.
iMPORTANT SAFETY iNSTRUCTiONS
Installation
WARNING - Fire hazard
Do not cover or crush the plug of
the appliance.
iHliiiiiiiliill
The
must
beinsta,,ed
and dishwasher
connected in
compliance
with
the installation instructions.
Installation and repair work should
beperformed
byaM,ele
authorized service technician. Work by
unqualified persons could be
dangerous and may void the warranty.
Do not install or use a damaged
dishwasher. A damaged appliance
is dangerous. Unplug the machine and
call your Miele dealer or the Miele
Technical Service Department.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely
and kept out of the reach of children.
Danger of suffocatio!!
This equipment is not designed for
maritime use or for use in mobile
installations such as recreational
vehicles or aircraft. However, under
certain conditions it may be possible for
an installation in these applications.
Please contact the nearest Miele dealer
or the Miele Technical Service
Department with specific requirements.
It
is recommended
the
dishwasher
only be that
connected
to
the mains with the plug (no
hard-wiring). The outlet must be
accessible at all times after installation
to disconnect the dishwasher.
Ensure that the cabinet
opening for the dishwasher provides
ample space for the plug. Installing the
dishwasher in a tight space may crimp
the power cord or put pressure on the
plug which could cause overheating.
This dishwasher should only be
installed under a continuous
counter top secured to adjacent
cabinetry.
Do
notinsta,,
this
dsurface,
ishwasher
beneath
a cooking
oven or
any appliance that radiates heat.
High temperatures from these units may
damage the dishwasher.
When installing the dishwasher
under a counter top and removing
the toekick, a build-under toekick must
be installed. Use the respective
installation kit. Danger of injuries.
Do not cut the intake hose or
submerge it in liquid. This hose
contains electrical components that
could cause injury or property damage
if cut or submerged.
Only connect the dishwasher to the
mains when all installation and
plumbing work is complete.
iMPORTANT SAFETY iNSTRUCTiONS
Use
ii
_o
reduce
thertoisk
ofiin,njury,
not
allow
children
play
on do
or near
the dishwasher.
Only use the dishwasher if all
panels are properly in place.
Do not tamper
with the controls.
iiliiii;iJiiiill
Do
sit
orstand
onthe
doornot
or damage,
baskets of
the
dishwasher.
Close the door when not in use.
Under certain conditions, hydrogen
gas may be produced ina hot
water system that has not been used
for two weeks or more. HYDROGEN
GAS IS EXPLOSIVE. If the hot water
system has not been used for such a
period, turn on all hot water faucets and
let water flow from each for several
minutes before using the dishwasher.
This will release any accumulated
hydrogen gas. Do not smoke or use an
open flame during this time.
Be sure that are
all items
placed safe".
in the
dishwasher
"dishwasher
For items not labeled, check the
manufacturer's recommendations.
When loading tableware, place
sharp items away from the door to
Only use detergents and rinse aids
recommended for residential
dishwashers. Keep all detergents and
rinse aids out of the reach of children.
Donotinhale
orswa,ow
detergents. Dishwasher detergents
contain irritant and corrosive
ingredients. They can cause burning in
the mouth and throat if swallowed, or
inhibit breathing. Consult a doctor
immediately if detergent has been
swallowed or inhaled.
Donot
drink
water
from
the
dishwasher! Harmful residues
could be present.
Do not fill the rinse aid reservoir or
salt container with detergent. It will
destroy the rinse aid compartment and
water softener.
i
If the power cord is damaged it
must only be replaced bye Miele
Service technician with a genuine Miele
power cord.
Disposal
of an appliance
,fthe
app,iance
isremoved
from
its
installation
site and
will not be
used, remove the doorlock to the wash
cabinet to prevent children from locking
themselves in the machine.
prevent damage to the seal. Load
sharp items pointing downwards to
prevent injuries.
SAVE THESE
INSTRUCTIONS
Guide to the dishwasher
@
@
@
Upper spray arm (not visible)
Cutlery tray (depending on model)
'_ Upper basket
Middle spray arm
'_ Air inlet for drying
(depending on model)
Lower spray arm
Filter combination
'_ Data plate
Optical interface
@ Rinse aid reservoir
Dual compartment
dispenser
Salt container
detergent
Guide to the dishwasher
Control panel
[
--
Fd_Time display
Delay Start button <_>with indicator
__]
Program selection
Program button
Detergent button
'_ On button I / Indicator
Check / Refill indicators
@ Off button O
'_ Glasscare indicator
@ Optical Interface
Caring for the environment
Energy
saving washing
This dishwasher is exceptionally
economical in the use of water and
electricity. For best results follow these
tips:
[] For lowest energy consumption and
the gentlest washing of china and
crystal, connect the dishwasher to a
cold water source.
[] For fastest possible wash times, yet
higher energy consumption, connect
the dishwasher to a hot water source.
[] Make full use of the baskets without
overloading for the most economical
washing.
[] Use the correct amount of detergent
and rinse aid.
[] When using powder or gel detergent,
reduce the amount to 2/3 of the
normal amount when washing a small
load.
[] Choose a program that best suits the
degree of soiling and the type of
dishes being washed.
[] For small loads select "Short".
Before using for the first time
To open the door
To close the door
[] Push the baskets in.
[] Lift the door and push until it clicks
into position.
[] Pull the handle to open the door.
If the door is opened during operation,
the dishwasher will stop running. Once
the door is closed the program will
continue.
10
Before using for the first time
Water softener
Every dishwasher is tested before
leaving the factory. Any water
remaining in the machine is from the
final factory test and does not
indicate that the machine has been
used.
To achieve good cleaning results, the
dishwasher needs soft water. Hard
water results in calcium deposits on
dishware and in the dishwasher.
If your tap water hardness is above 4°d
(8 gr/gal, US gallons, [140 ppm]), the
water should be softened. This takes
place automatically in the unit's
integrated water softener.
The water softener is set automatically
to the local water hardness.
The water softener is designed for a
water hardness of up to 70 °d.
Checking
the water
hardness
Once the dishwasher has been
installed and connected, run the
"Rinse + Hold" program. After the
program has finished, the water
hardness measured by the sensor can
be displayed.
This value is displayed in °d and may
vary depending on the water quality.
[] Turn the dishwasher off with "(._".
[] Press and hold the program and "1"
button simultaneously.
Hold the
program button until the lower right
program indicator lights.
If it does not come on, start over.
[] Press the "Detergent" button twice.
The "Gel" indicator flashes twice in
intervals. The measured water hardness
is shown in the time display in the
numbers following "P".
[] Turn the dishwasher off with "(._".
salt. The salt indicator turns off
i not need to add water softener
11
Before using for the first time
Filling the salt container
specially formulated for
dishwashers. Other salts may
i contain
_Only insoluble
use wateradditives
softener which
salt
can impair the water softener.
[] Remove the lower basket and
unscrew the salt container lid.
Important: The salt container must
be filled with 2 quarts (2 I) of water
before adding salt for the first
time, Water does not have to be
added with subsequent refills.
12
Place the provided funnel over the
salt container. Carefully fill with salt.
The salt container holds approx.
4.5 Ibs (2 kg) of salt. As it is filled,
water will run out.
[] Clean any excess salt from the
threads of the container opening.
Screw the lid on firmly.
[] If the dishwasher will not be used
immediately, run the "Short" program.
This will remove any traces of salt
from inside the wash cabinet.
Before using for the first time
Salt indicator
Intake / Drain O O Glasscare
Rinse aid
Salt
O
(_
[] When the "Salt" indicator comes on,
refill the salt after the program is
finished.
After the container has been filled, the
water softener is automatically
reactivated the next time the
dishwasher is started. The "Salt"
indicator will be lit during this process.
13
Before using for the first time
Rinse aid
Rinse aid helps to prevent spotting on
dishes and glassware. The rinse aid is
filled in the reservoir and the set
amount will be automatically dosed.
z_Filling
detergent
Only pour
ii residential
reservoir.
the rinse aid reservoir with
will damage the reservoir.
rinse aid formulated for
dishwashers into the
ii When using "2 in 1" detergents,
Adding
no
rinse aid
III
[] Pour liquid rinse aid into the reservoir
until it its visible on the surface of the
screen.
The rinse aid reservoir holds approx.
3.7 oz (110 ml).
[] Press on the flap until you hear it
click shut. Failure to close it all the
way allows water to enter the
reservoir during the wash program.
[] Clean any spilled rinse aid. The flap
will remain closed during normal
operation.
[] Press the button in the direction of
the arrow until the flap springs open.
14
Before using for the first time
Rinse aid indicator
Adjusting
When the rinse aid indicator first comes
on, there will be enough rinse aid left
for 2 - 3 washes.
The dosage selector is preset to 3. This
dispenses approximately 3 ml of rinse
aid per program. It can be adjusted
from 1 to 6.
Intake / Drain
Glasscare
Rinse aid
Salt
(_
O
the dosage
-
Use a higher setting if spots appear
on dry glassware.
-
Use a lower setting if streaking
appears on dishes or glasses.
[] Turn the dishwasher off "(._".
[] Press and hold the program button
and at the same time turn the
dishwasher on with "1".Hold the
program button until the lower right
program indicator lights.
[] The rinse aid indicator on the control
panel will light when the rinse aid
reservoir needs refilling.
i rinse
aid indicator
not light, see
"Additional
functionswill- Detergent
settings".
If it does not come on, start over.
[] Press the "Detergent" button 3 times.
The "Gel" indicator flashes 3 times.
The time display shows "P 9" flashing.
A rinse aid amount of 3 ml is selected
(factory setting).
The set value is shown in the time
display after "P".
[] Select the desired setting with the
program button. Every touch of the
button adjusts the level.
The dosage is saved.
[] Turn the dishwasher off "(._".
15
Loading the dishwasher
z_Do not wash items soiled with
ash, sand, wax, grease or paint in
the dishwasher.
Ash and sand do not dissolve and
will be distributed throughout the
inside of the dishwasher.
Wax, grease and paint will cause
permanent discoloration and
[] Scrape food from dishes before
placing them in the dishwasher,
rinsing is not necessary.
[] Some foods contain natural dyes,
e.g. carrots or tomatoes. Plastic items
may discolor permanently if they
come in contact with food dyes.
[] All items can be placed anywhere in
the baskets.
[] Load dishes so that water can reach
all surfaces. Do not place dishes or
cutlery inside other pieces.
[] Make sure that all items are securely
positioned.
[] Hollow items such as cups and
glasses should be placed upside
down in the baskets.
[] To ensure good water coverage,
tall, narrow and hollow items,
i.e. vases or champagne glasses,
should be placed in the center of the
basket rather than in the corners.
[] Concave based items such as mugs
or bowls, should be placed at an
angle so that water does not pool.
16
[] The spray arms must not be blocked
by items that are too tall or hang
through the baskets. Check
clearance by manually rotating the
spray arms.
[] Place very small items in the cutlery
tray or basket so they do not fall to
the bottom of the wash cabinet.
Food residue and spilled liquids
should be cleaned from the sides of
the dishwasher door. These are
outside of the wash cabinet and are
not cleaned by water from the spray
arms.
Loading the dishwasher
items not recommended
for
Glassware:
dishwashing
-
Cutlery with wooden handles
-
Wooden cutting boards
-
Glued items such as old knives with
handles glued together around the
shank of the blade
-
Handmade craft items, antique,
metal trimmed or decorative
glassware
There are no standard guidelines for
washing glassware, when in doubt
wash by hand.
When purchasing new dishes,
glasses and cutlery, make sure they
are dishwasher safe. Only wash
items marked "dishwasher safe" in
the dishwasher.
If fine glassware is washed in the
dishwasher select the "China &
Crystal" program*. This will reduce
the risk of clouding.
-
Plastic items that are not heat
resistant
-
Copper, brass, tin or aluminum
Silver and aluminum:
-
Dishes with color painted over the
glaze. These dishes may fade over
time
-
Silver or aluminum items may tarnish.
-
Silverware previously cleaned with a
silver polish may be damp or spotted
at the end of a program where water
has adhered to the polish. This can
be rubbed off with a soft, dry cloth.
Silver that has been cleaned in an
immersion dip is usually dry at the
end of a program, but may tarnish.
-
If left to dry, foods containing sulfur
can discolor silver. These include
-
Fine glassware and crystal items
should only be washed using the
"China & Crystal" program*.
Otherwise clouding or etching may
occur after frequent washing.
-
Cast iron pots and pans
* depending on model
egg yolk, onions, mayonnaise,
mustard, fish and marinades.
-
Silverware may tarnish or pit if
washed next to stainless steel.
Leave space between these metals.
-
Clean aluminum items, e.g. grease
filters, with domestic dishwasher
detergent only.
17
Loading the dishwasher
Cutlery
tray
(depending on model)
Spoons with thick handles may have to
be placed as knives and forks with their
heads in the holders
[] Arrange the cutlery as shown in the
cutlery tray.
For easier unloading cutlery should be
grouped in zones, one for knives, one
for forks, one for spoons, etc.
Place knives with the cutting edge
down and forks with the prongs
between the holders. Spoons should be
placed in the opposite direction with
the handles between the holders.
The cutlery tray insert is removable.
18
Loading the dishwasher
Cutlery
basket
(depending on model)
[] For best cleaning results, cutlery
should be placed in the basket with
the handles down. Knives and forks
should be loaded with the pointed
end down to prevent injuries.
Spoon inserts for the cutlery
basket
The supplied insert is designed to wash
heavily soiled spoons. The individual
slots allow the water to better reach the
surface of each spoon.
[] Attach the insert when needed to the
cutlery basket.
[] Place small spoons in the individual
slots to either side of the cutlery
basket.
iiii
[] Insert the cutlery with the handles
down into the insert. Arrange the
cutlery evenly.
19
Loading the dishwasher
Upper
Coffee bar
basket
(depending on model)
Glasses can be leaned against the
coffee bar to allow a firm stand.
¸
[] Load the upper basket with small,
lightweight, or delicate items such as
cups, saucers, glasses, dessert
bowls and flat pans.
[] Long items such as soup ladles,
mixing spoons and long knives
should be placed lying down across
the front of the upper basket.
20
[] The bar can also be used to separate
two rows of glasses.
[] To stack wide items, flip the bar to the
right.
Cup racks
[] Raise the rack to make room for tall
glasses. Lower it to double stack
smaller pieces.
Loading the dishwasher
Removable
spike insert
Removing the insert _:
The spike insert can be removed to
create more space for larger items,
e.g. a saucepan.
[] To remove an insert, gently pull up on
the handle.
Inserting the insert _:
[] Slide the hitches of the insert under
the horizontal struts of the upper
basket.
[] Push down on the handle to snap the
insert into position.
21
Loading the dishwasher
Adjusting
the upper
basket
The upper basket can be raised or
lowered to accommodate tall items.
The basket can also be angled to fit tall
items in both, the upper and lower
baskets. The angles should net be set
to opposite extremes. This will block the
middle spray arm. Take care when
sliding the basket in and out in this
position.
[] Slide out the upper basket.
[] Pull up the levers at the sides of the
upper basket and adjust the basket
height.
[] Release the levers and the basket will
lock in place.
22
Depending on the setting of the upper
basket, a variety of plate dimensions
can be accommodated.
For example: If the upper basket is in
its highest position a plate with a
3
,,
diameter of12 /16 (31cm) canbefitin
the lower basket.
Loading the dishwasher
Lower
basket
[] For larger and heavier items such as
plates, serving platters, saucepans,
bowls, etc.
23
Lower basket inserts
PlateGuard Plus with StemGuard
Bottle holder
The comfort insert is designed for cups,
glasses, plates, bowls and pots.
[] The insert sits comfortably
side of the lower basket.
in the left
[] To insert tall items, raise the cup rest.
The bottle holder, e.g. for vases and
baby bottles, can be inserted into the
lower basket.
If placed anywhere else, water will not
reach all surfaces. The bottle will not be
properly cleaned.
[] Lean or hang stemmed glassware
such as wine or champagne glasses
in the cut outs of the cup rest.
24
Lower basket
inserts
Foldable Spike insert
Removing an insert _:
A highly flexible design holds tableware
securely.
[] To remove an insert, gently pull up on
the handle.
[] Hook the foldable spike insert into the
back right corner of the lower basket.
Inserting
an insert _:
[] Slide the hitches of the insert under
the vertical struts of the lower basket.
[] Push down on the handle to snap the
insert into position.
Two rows of spikes can be folded
down, to create more room for larger
dishware, e.g. pots, pans and bowls.
[] Press down the yellow lever, _, to
fold down the spikes, _.
25
Basket accessories
Additional inserts for the upper and lower baskets may be purchased from your
Miele dealer or Miele. Depending on the model some accessories come standard
with the machine.
Glassware insert GGO
To wash long stemmed glassware,
attaches to the upper basket
Cappuccinatore
To wash the parts of the Cappuccinatore
(milk froth mug supplied with the Miele
Coffee System), attaches to the upper
basket
Multi-function
insert GCEO
basket GMFO
To wash baby bottles, saucers and small
items, attaches to the upper basket
Tall glassware insert GGU
To wash a large number of tall glasses,
attaches to the lower basket
Large diameter plate insert
GTLU 35
To wash plates with a diameter up to 14"
(35 cm), attaches to the lower basket
26
Use
Detergent
Avoid inhaling or swallowing
dishwasher detergent.
Keep children away from detergent.
Fill the detergent dispenser only
when you are ready to start the
You can use powder, gel or tab
detergents. Follow the dosage
information on the detergent
packaging. See "Settings - Detergent"
for more information on detergent
usage.
Detergent tabs are not recommended
for use with the program "Short". The
tabs may not dissolve completely.
z_Only use detergents formulated
for domestic dishwashers.
Use only the recommended amount
of detergent. Continued use of too
much detergent may cause machine
damage.
27
Use
Adding
detergent
[] To open, press the latch on the
detergent dispenser. The flap will
spring open.
The flap is always open at the end of a
p rog ram.
[] Add detergent to compartment
close the flap.
II and
[] If a Pre-rinse is desired, and available
for your chosen program, add
1 teaspoon (5 ml) of detergent to
compartment I.
The horizontal marks in compartment II
indicate the levels of approximately 1 1A
and 2 tablespoons (20 and 30 ml)
respectively. Compartment I holds a
maximum of 2 teaspoons (10 ml).
28
Use
Turning on
[] Open the water supply, if it is closed.
[] Open the door.
[] Make sure the spray arms can rotate
freely.
[] Turn the dishwasher on "1".
The "1"indicator and the indicator of the
last set program lights.
Selecting
program
and starting
a
[] Choose your program according to
the type of load and soiling. See the
"Program Guide" for more
information.
[] Select the desired program with the
program button.
The program indicator of the selected
program lights. The time display shows
the duration of the selected program in
hours and minutes. If the "2 in 1" or
"Gel" option is selected, the respective
indicator illuminates. See "Detergent
settings" for more information.
[] Select an additional function if
desired, see "Additional functions" for
more information.
[] Close the door.
The program starts.
The optical indicator lights as a
confirmation for a started program.
program steps (e.g. the water
5 minutes. Otherwise important
29
Program guide
I
I
,
program
sequence
I
Pre_
rinse
1
Pots & Pans
For normally soiled pots and pans
with dried on food, also for heavily
soiled dishware, use 120% of
normal detergent dose
Normal
For normally soiled dishware
x
China &
For temperature sensitive
glassware and lightly soiled
dishware, use 50% of normal
Crystal
Main
, wash
2
,
Interim
rinse
1
2
Final
Drying
rinse ,
x
x
x
x
x
x
x
x
x
x
as
required
x
x
x
x
x
x
as
required
detergent dose, includes sensor
controlled Glasscare
SaniWash
Extended wash time,
for sanitizing normally soiled
dishware with dried on food
x
x
Short
"Quick program" for lightly soiled
dishware, e.g. party dishware or to
remove salt traces from the wash
x
x
cabinet after refilling salt,
includes sensor controlled
Glasscare, not suitable for
detergent tabs
Rinse & Hold
To rinse dishes when a complete
program is not needed
detergent is not recomraended
Usage:
Electric:
0,01 - 1,23 kWh
Water:
1.3 - 6.3 gal (5 - 24 I)
3O
x
x
x
Use
Time display
At the end of a program
Before the program starts, the time
display shows the running time of the
selected program in hours and minutes.
During the running program the
remaining time shown in the time
display.
At the end of a program the optical
function light flashes slowly with the
door closed.
The running time for the same program
may vary depending on the intake
water temperature, load size and
soiling.
When a program is selected for the first
time, a time is shown which equals an
average program running time with
cold water.
The time values in the program guide
correspond to the program running
times with standard loads and
The time display shows "0".
Dishes tends to chip if removed still hot
from the dishwasher.
Let the dishware cool.
After turning off the dishwasher open
the door slightly. The dishes will cool
much faster.
[] Unload the dishwasher.
The optical function light goes out one
hour after the end of a program.
[] Turn the dishwasher off "_._".
temperatures.
Each time a program is run, the
electronic adjusts the program running
time according to the intake water
temperature and the load size.
Glasscare
[] If the dishwasher is not used for a
longer period of time, e.g.
vacationing, turn off the water supply.
indicator
The green Glasscare indicator lights
during the China & Crystal program.
This indicates that a program has been
selected which washes glasses
especially gently.
31
Use
interrupting
a program
A program is interrupted as soon as the
door is opened. If the door is closed,
the program will continue from where it
was interrupted.
z_Open the door with care. The
water in the dishwasher is hot.
Danger of scalding. Before closing
the door again, leave it ajar for
approx. 20 secs. This will enable the
temperature in the wash cabinet to
settle. Close the door firmly until it
clicks into place.
Changing
a program
Ifthedetergent
flapisalready
open,
If a program has already started and
you wish to change it:
[] Open the door.
[] Press the "(._" button.
[] Press the "1"button.
[] Select the desired program with the
program button.
[] Close the door.
The optical control lights. The program
starts.
32
Additiona(
Detergent
options
settings
To achieve the best results, set the
detergent used to your dishwasher. The
"Detergent" button allows you to select
the function "2 in 1" or "Gel". The
program cycle sequence will be
adjusted for the selected detergent.
Depending on the program, the
program running time may be
increased.
"2 in I"
The function "2 in 1" adjusts the
program cycle to the use of "2 in 1"
detergent products (detergent with
rinse aid). The rinse aid dosage and
the rinse aid refill indicator will be
deactivated.
"Ge("
[] Open the door.
[] Turn the dishwasher on "(".
The indicator "(" lights.
[] Press the "Detergent" button until the
indicator of the desired detergent
"2 in 1" or "Gel" lights.
If none of the indicators are lit, the
dishwasher is set to powder detergent.
The set function will be active for all
programs until the setting is changed.
[] A program can be started or the
dishwasher can be turned off "(7".
The function "Gel" adjusts the program
cycle to the use of liquid "Gel"
detergent products.
33
Additional
options
Delay start
The starting time of a program can be
delayed. The start time can be delayed
from 30 minutes to 24 hours.
With a delay start time between 30
minutes and 9 hours 30 minutes the
delay is set in 30 minute steps. For 10
hours or more it is set in one hour
steps.
Once the delay start time has elapsed,
the selected program starts. The
display shows the remaining time, the
indicator "_:>"goes out and the indicator
of the selected program lights.
Delay start display
Up to 59 minutes: e.g. 30 minutes = __0
Between 1 h and 9 h 30 min:
e.g. 5 hours = S.00
When using the "Delay Start"
function, make sure that the
i detergent compartment is dry before
adding detergent. Wipe dry with a
cloth if necessary. Otherwise the
not completely rinse out.
Liquid detergent should not be used
selecting
Start", the
i when
etergent
could "Delay
stick together
and
detergent could leak.
[] Open the door.
[] Turn the dishwasher on "1".
The indicator "1"lights.
[] Select the desired program with the
program button.
[] Press the "<_>"button.
The last set delay start time will show in
the time display. The indicator "_:>"
lights.
[] Set the desired delay start time with
the "<_>"button.
[] Close the door.
The time will count down to the
program start: in 1-hour-steps over
10 hours, in 1-minute-steps under
10 hours.
34
10 hours and over: e.g. 15 h = IS_
Starting a program before the delay
start has elapsed
A program can be started before the
delay start time has elapsed.
[] Open the door.
[] Press the O button.
[] Press the I button.
[] Select the desired program with the
program button.
[] Close the door.
The optical control lights. The program
begins.
Additiona(
options
B u zze r
Default
A signal sounds at the end of a
program and when a fault occurs.
All settings can be reset to the factory
default.
The buzzer at the end of a program
sounds five times in quick succession
for up to one hour.
[] Open the door.
The buzzer for a fault sounds in
[] Press the program button and at the
same time turn the dishwasher on "(".
Hold the program button for at least
4 seconds until the lower right
program indicator comes on.
intervals up to two minutes.
The buzzer is activated by default. It
can be turned off, so it does not sound
at the end of a program. The buzzer for
a fault cannot be turned off.
[] Open the door.
setting
[] Turn the dishwasher off "(/.
If it does not come on, start over.
[] Press the tab button 12 times.
[] Turn the dishwasher off with "(/.
The "Gel" indicator flashes once long
and twice short in intervals.
[] Press the program button and at the
same time turn the dishwasher on
with "(".
The time display shows if a setting was
changed.
[] Hold the program button for at least
4 seconds until the lower right
program indicator comes on.
If it does not come on, start over.
[] Press the tab button four times.
The "Gel" indicator flashes four times in
intervals.
-
"P 7":All settings are factory default.
-
.p
s'l..
,_,. At least one setting was
changed.
[] To reset the dishwasher to the factory
default, press the program button.
The setting is saved.
[] Turn the dishwasher off "(7".
The time display shows if the program
end buzzer is turned on or off.
-
"P 7":Buzzer is turned on
-
"P O": Buzzer is turned off
[] Press the program button to change
the setting.
The setting is saved.
[] Turn the dishwasher off with "(7".
35
Frequently asked questions
With the aid of the following guide, minor problems can be fixed without a service call.
_i ,_Repairs
should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
Issue
Possible fault
Fix
The program does not
start.
The door is not
Close the door firmly.
properly closed.
The machine is not
Insert the plug.
plugged in.
The fuse is defective Reset the circuit breaker.
or the breaker has
Make sure it is a 15 A
breaker.
tripped.
The dishwasher is
not turned on.
The dishwasher stops
during a program.
The fuse has
tripped.
The optical indicator is not The reflector was
visible when a program
not properly
has started,
installed.
36
Press 'T' and select a
program.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
Install the reflector properly,
see Installation sheet.
Frequently
asked questions
Issue
Possible fault
Fix
The optical indicator
flashes.
The buzzer sounds.
There may be a
technical fault.
Turn the dishwasher off "(7".
- Turn the dishwasher on.
All program indicators
are flashing fast when
the door is open.
The time display shows
FXX.
The drain pump is
running when the door
is opened,
After a few seconds:
-
Select the desired program
with the program button.
- Close the door.
If the problem persists call
Technical Service.
Fault F70: The
waterproof system
has activated.
- Turn off the water supply.
- Call Miele Technical Service.
37
Frequently asked questions
issue
Possible fault
Fix
The optical indicator
flashes,
The buzzer sounds.
The "intake/Drain"
indicator flashes when the
The water supply
is shut off.
-
Open the water supply.
door is open.
The dishwasher stops.
The optical indicator
flashes.
The buzzer sounds.
The "intake/Drain"
indicator flashes when the
door is open.
The time display shows
FXX.
Before fixing the fault:
Turn the dishwasher off "(_".
Fault F12/F13:
- Open the water supply.
Water intake fault _ Clean the water intake filter,
see "User Maintenance
Instructions".
The water pressure at the
water connection is lower
than 4.35 psi.
Consult a plumber.
Fault F11: Water
See "User Maintenance
drain fault.
Instructions".
There may be
- Clean the triple filter.
water in the wash
- Clean the drain pump and the
cabinet.
non-return valve.
-
38
Remove any kinks in the drain
hose.
Frequently
Issue
Possible fault
Detergent is left in the The dispenser was damp
dispenser at the end
when detergent was
added.
of a program.
The detergent lid
cannot be closed
properly.
The door and the
interior walls are still
wet after a program
has finished.
asked questions
Fix
Dry the dispenser before
adding detergent.
Detergent residue is
blocking the catch.
Remove the residue.
This is not a fault! It is the
normal operating mode of
the drying system.
The moisture will evaporate
after a short time.
Water remains in the
wash cabinet at the
Before fixing the fault:
- Turn the dishwasher off
end of a program.
The triple filter in the wash
cabinet is clogged.
Clean the triple filter. See
"User Maintenance
Instructions".
The drain pump or the
non-return valve may be
blocked.
Clean the drain pump and
the non-return valve, see
"User Maintenance
Instructions".
The drain hose is kinked.
Remove any kinks from the
drain hose.
39
Frequently asked questions
i_!i_iii!_ili!_i_!ii_!ii!ii!ii!ii!ii!
ii!ii!ii!ii!ii!ii!ii!ii!
ii!ii!ii!ii!ii!ii!ii!ii!
ii!ii!ii!ii!ii!ii!ii!ii!
ii!ii!ii!ii!ii!ii!ii!ii!
ii!ii!ii!ii!ii!i
i!ii!ii!
ii!ii!ii!ii!ii!i
i!ii!ii!
ii!ii!ii!ii!ii!i
i!ii!ii!
ii!ii!ii!ii!ii!i
i!ii!ii!
ii!ii!ii!ii!ii!i
i!ii!ii!
ii!ii!ii!ii!ii!i
i!iiiii!
i!!!i!il
!if!
ii!i
i!ii!ii!
i!ii!
if!
ii!ii!ii
!ii!ii!i
ili!i!i!
iii!i!il
iii
iiiii
iii
iiill
iii
iiiii
iiiiiiil
fill
iill
ili!iiii
iiili
ili
iiiiiiiiiiiiiiiiiiiiiii!ili!i!ii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!iiiii!iiiii!iiii
i!ii!i!ilili!i!ili!i!i!i
!i!i!ii!ii!ii!ii!ii!ii!i
i!ii!ii!ii!iiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiii
iiiiiiii
iiiiiiiiiiii!i!!
i!!i!!i!!i!iii!i!iii!i!iii!i!iil
!!!!i!!!!!i!ii!ii!ii!ii!
ii!ii!ii!ii!ii!ii!ii!ii!
ii!ii!ii!ii!ii!ii!ii!ii!
ii!ii!ii!ii!ii!ii!ii!ii!
ii!ii!ii!ii!ii!ii!ii!ii!
ii!ii!ii!ii!ii!ii!ii!ii!
ii!ii!ii!ii!ii!ii!ii!ii
ii!ii!ii!ii!ii!ii!ii!i
ii!ii!ii!ii!ii!ii!ii
ii!
ii!ii
!ii!ii!i
i!ii!ii!
ii!ii!ii
!ii!ii!i
i!ii!ii!
ii!ii!ii
!ii!ii!i
i!ii!ii!
ii!ii!ii
!ii!ii!i
i!ii!ii!
ii!ii!ii
!ii!ii!i
i!ii!ii!
ii!ii!ii
!ii!ii!i
i!ii!ii!
ii!ii
!ii
!ii!ii!
!i!i!ii
issue
Possible fault
There is a knocking
noise in the wash
cabinet,
The spray arm is hitting an Interrupt the program,
item in the basket,
rearrange items blocking
the spray arms.
There is a rattling
noise in the wash
cabinet.
Items are not secure in the
wash cabinet,
There is a knocking
noise in the water
pipes,
This may be caused by the This has no effect on the
installation or the diameter dishwasher. If in doubt
of the pipe.
contact a plumber.
40
Fix
Interrupt the program and
rearrange loose pieces.
Frequently
asked questions
Issue
Possible fault
Fix
The dishes are not
clean.
The dishes were not loaded
See "Loading the
dishwasher".
correctly.
The program was not
powerful enough.
Select a more intensive
program, see "Program
Guide".
Not enough detergent was
dispensed.
Use more detergent, see
Adding detergent".
The spray arms are blocked
by items.
Turn the spray arm and
rearrange the dishes if
necessary.
The triple filter is clogged or Clean the filter and insert
not correctly inserted. The
the filter correctly, see "User
Maintenance Instructions".
spray arm jets may be
clogged.
Glasses and cutlery
show streaks. There
is a bluish sheen on
the surface of
The drain pump or the
non-return valve is blocked.
Wash water will run back
into the wash cabinet.
Clean the drain pump and
the non-return valve, see
"User Maintenance
Instructions.
The rinse aid dosage is set
too high.
Reduce the dosage, see
"Before using for the first
time".
glasses and film that
can be wiped off.
41
Frequently asked questions
Issue
Possible fault
Dishes are not dry,
glasses and cutlery
are spotted.
The rinse aid setting may be Increase the dosage, refill
the reservoir or switch the
too low, or the rinse aid
reservoir is empty.
rinse aid product when
refilling, see "Before using
for the first time".
White residue is
visible on cutlery
and dishes.
Clouding occurs on
glassware and film
can be wiped off.
42
Fix
Dishes were taken out too
Leave dishes in longer, see
soon.
"Use".
A "2 in 1" product was used.
These products have a low
drying effect.
Set the Detergent setting to
"Powder" and add rinse aid.
The Detergent setting "2 in
1" or "Gel" is turned on, but
another product was used.
Set the Detergent setting to
the detergent used, see
"Detergent settings".
Not enough rinse aid was
used.
Increase the dosage, see
"Before using for the first
time".
The salt container is empty.
Refill the salt container, see
"Before using for the first
time".
The salt container lid was
not correctly screwed on.
Reseat it making sure it
screws back on correctly.
Unsuitable "2 in 1" or "Gel"
_roducts were used.
Change detergent, use
normal tabs or normal
_owder detergent.
The automatic water
softener unit is defective.
Contact Miele's Technical
Service.
Frequently
asked questions
Issue
Possible fault
Fix
Glasses are
discolored and the
film cannot be wiped
off.
Detergent deposits.
Use a different detergent.
Glasses are dull and
discolored, film
cannot be wiped off.
Glasses are not dishwasher
safe.
There is no remedy. Only
wash dishwasher safe
Tea or lipstick stains
have not been
The wash temperature of
the selected program was
too low.
Select a program with a
higher temperature.
The detergent has a low
bleaching effect.
Use a different
Natural dyes e.g. from
vegetables may be the
cause. Not enough
detergent was used to
break down natural dyes.
The affected items are not
corrosion resistant.
Use more detergent, see
"Adding detergent".
Discoloration is permanent.
No program was run after
refilling salt. Salt residuals
got in the wash cycle.
Start the "Short" program
without a load after refilling
salt.
The salt container lid was
not screwed on properly.
Reseat and screw the lid on
firmly.
completely
removed.
Plastics are
discolored.
There are rust stains
on cutlery.
glasses in the dishwasher.
detergent.
There is no remedy. Only
wash dishwasher safe
cutlery in the dishwasher.
43
After sales service
Repairs
MieleCare
In the event of a fault which you cannot
correct yourself please contact the
Miele Service Department at the phone
number on the back of this booklet.
MieleCare, our Extended Service
Contract program, gives you the
assurance of knowing that your
appliance investment is covered by
5 years of worry free ownership.
MieleCare is the only Extended Service
Contract in the industry that guarantees
repairs by a Miele Authorized Service
Provider using genuine Miele parts.
Only genuine Miele parts installed by
factory trained professionals can
guarantee the safety, reliability, and
longevity of your Miele appliance.
[] Please quote the model type and
number of your appliance.
These can be found on the data plate
along the right edge of the door.
PC Update
The Program Correction (PC) allows a
technician to update the dishwasher to
make use of new technology.
When, for example, technological
developments offer advanced
modifications to your existing program
cycles a service technician will be able
to input these into your machine
controls via the indicator light marked
PC. Miele will provide information when
such possibilities become available.
Please note that unless expressly
approved in writing by Miele's Service
department, Extended Service
Contracts offered by other providers for
Miele products will not be recognized
by Miele. Our goal is to prevent
unauthorized (and untrained) service
personnel from working on your Miele
products, possibly doing further
damage to them, you and/or your
home.
To learn more about MieleCare
Extended Service Contracts, please
contact your appliance dealer or visit
us online at:
www.store.miele.com
44
Transport
To transport the dishwasher, e.g. when
moving to a new home, note the
following:
-
Empty the dishwasher.
-
Secure any loose parts, e.g. hoses,
cables, cutlery baskets.
-
Transport the dishwasher in the
upright position. If unavoidable it
may be transported on its back. Do
not transport it on its side or on the
door. Residual water in the machine
could leak and cause electrical
damage.
45
46
User Maintenance
To prevent accidents
and machine damage,
read these instructions
before installation or use.
Instructions
Cleaning
and Care
Indicator
i
months). This will help avoid faults
egularly (approx. every 4-6
and problems.
reflector
The reflector of the optical indicator is
located in the steam deflector beneath
the counter top.
To clean the reflector, remove it from the
plastic bracket.
z_Abrasive
cleaning agents, glass
cleaning agents, all-purpose
cleaners, thinner or ammonium
cleaners should not be used on the
dishwasher. They will damage the
surface.
Wash cabinet
[] Open the door and remove the
reflector from the bracket.
[] Clean the reflector and the plastic
bracket with a damp cloth.
[] Return the reflector to the bracket.
Control
panel
Generally, the wash cabinet is self
cleaning if the correct amount of
detergent is used.
[] Clean the control panel with a damp
cloth.
The wash cabinet can be cleaned with
a dishwasher cleaner such as "Dis
Exterior
Cleaner" available from your Miele
dealer, Miele or online at
www.miele.com.
[] Use a conditioner suitable for your
kitchen cabinetry.
Door and the door seal
[] Wipe the door seals regularly with a
damp cloth to remove food deposits.
[] Food residue and spilled liquids
should be wiped from the sides of the
dishwasher door. These are outside
of the wash cabinet and are not
cleaned by water from the spray
arms.
48
[] Clean wood with a damp cloth and
wipe dry.
[] Stainless steel surfaces can be
cleaned using a non-abrasive
stainless steel cleaner or with
dishwashing
water.
detergent and warm
To help prevent resoiling, a
conditioner for stainless steel can
also be used. Apply sparingly with
even pressure.
Cleaning
and Care
Triple filter system
The triple filter system in the base of the
wash cabinet prevents food from being
redeposited on dishes. It also protects
the circulation pump from damage
caused by foreign objects (e.g. broken
glass, bones).
[] Check and clean the filter system
every 4-6 months or whenever a
foreign object is trapped.
The level of soiling and time it takes
before the filters need cleaning will vary
depending on your household.
[] Turn off the dishwasher before
cleaning.
[] Turn the handle counterclockwise
to
release the triple filter system.
[] Lift the filter combination
out of the
machine. Remove any solid particles
and rinse under running water. Scrub
with a nylon brush if necessary.
49
Cleaning
and Care
To clean the inside of the filter, the flap
must be opened.
[] Return the filter so it lies flat in the
base of the wash cabinet.
[] Push the clips together _ and open
the flap _.
[] Lock the filter by turning the handle
clockwise.
[] Rinse under running water.
[] Close the flap so that the clip
engages.
50
z_The triple filter system must be
inserted and locked. Large particles
ii could get in the circulation system
C(eaning
C(eaning
and Care
the spray arms
Sometimes particles of food get stuck
in the spray arm jets. The spray arms
should be inspected and cleaned every
4 - 6 months.
[] Turn off the dishwasher before
cleaning.
Removing
the spray arms
[] Remove the cutlery tray (if present).
[] Press the top spray arm up to
engage the inner ratchet and
unscrew the spray arm.
[] Lift up the middle spray arm, Fd_,to
engage the ratchet and unscrew the
spray arm, _.
[] Remove the lower basket.
[] Pull the lower spray arm firmly
upwards to remove.
[] Use a pointed object such as a
toothpick to push food particles into
the spray arm jets.
[] Rinse thoroughly under running
water.
[] Return the spray arms and check
that they rotate freely.
51
Cleaning
Cleaning
and Care
the water inlet filter
A filter is incorporated into the intake
hose attached to the dishwasher's shut
off valve. If your water is hard or the
pipes contain sediment, this filter may
clog and prevent enough water from
entering the wash cabinet.
@
[]
Carefully remove the rubber seal.
Installing an in=line water filter
[]
If your water contains a large number of
insoluble substances, a filter between
the water valve and the intake hose
connection is recommended. These
Remove the filter using needle nose
pliers and rinse it under running
water.
[] Reinsert the filter and seal. Make sure
they are seated correctly.
filters can be purchased from Miele.
[] Screw the intake hose back on the
Cleaning
the filter
[] Turn off the dishwasher and pull the
plug.
[] Turn off the water supply.
[] Unscrew the intake hose.
52
water valve, checking that it is not
cross-threaded.
Slowly turn on the water supply and
test for leaks.
Cleaning
and Care
Cleaning the drain pump and
non=return
valve
If the dishwasher is not completely
drained at the end of a program, the
drain pump or non-return valve may be
blocked.
[] Turn off the dishwasher and pull the
plug.
[] Remove the triple filter (see "Triple
filter system").
[] Use a jug or bowl to scoop water out
of the wash cabinet.
The drain pump is beneath the
non-return valve (see arrow).
[] Remove all foreign objects from the
drain pump (glass or bone splinters).
[] Before returning the non-return valve,
check that the drain pump is not
blocked. Spin the propeller several
times in both directions to check for
obstructions.
[] Carefully reinsert the non-return valve
and secure it with the locking clamp.
iI z_Make
sure the locking clamp
[] Tilt the locking clamp to the side _.
[] Pull out the non-return valve _ and
rinse it under running water.
[] Remove all foreign objects from the
non-return valve.
53
54
Installation
Instructions
For installation of the dishwasher
please refer to the Installation Sheet
supplied with these instructions.
Help to protect the environment
Disposal
material
of the packing
The cardboard box and packaging
protect the appliance during shipping.
These materials are biodegradable and
recyclable. Please recycle.
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocatio!!
56
Disposal
of an old machine
Old appliances may contain
that can be recycled. Please
your local recycling authority
possibility of recycling these
materials
contact
about the
materials.
Ensure that the appliance presents no
danger to children while being stored
for disposal. Before discarding an old
appliance, unplug it from the outlet, cut
off its power cord and remove any
doors to prevent hazards.
Electrical connection
z_lnstallation,
repairs and other
work by unqualified persons could
be dangerous. The manufacturer
cannot be held responsible for
unauthorized work.
Check that the voltage, frequency
and fuse rating shown on the data
plate match the household mains
supply.
The power outlet must be accessible
after installation. Do not use an
extension cord to connect the
dishwasher to the mains. Danger of
overheating! See data plate on the
right side of the door.
A damaged power cord must only
be replaced with a genuine Miele
cord by a Miele service technician.
GROUNDING _NSTRUCT_ONS
z_lmproper
connection of the
equipment grounding conductor
can result in electric shock. Do
not modify the plug provided with
the appliance; if it will not fit the
outlet, have a proper outlet
installed by a qualified electrician.
ff there is any question
concerning the proper electrical
connection or grounding of this
appliance to the power supply,
please consult a licensed
electrician or call Mieie's
Technical Service Department:
_)
!:
i:
!_
1-800-999-1360
1-800-565-6435
Specifications
The dishwasher comes equipped with a
4 ft (1.2 m) power cord with a molded
plug for connection to 120 V, 60 Hz,
15 A grounded receptacle.
In the event of a malfunction or
breakdown, grounding will reduce the
risk of electric shock by providing a
path of least resistance for the electrical
current. This appliance is equipped
with a cord having an equipment
grounding conductor and a grounding
plug. The plug must be plugged into an
appropriate outlet that is installed and
grounded in accordance with all local
codes and ordinances.
57
Plumbing
Connection
z_D°
-
to the water supply
not drink water from the
The dishwasher can heat its own
water to the temperature required by
the wash program. This allows for
connection of the machine to either a
hot or cold water source. For lowest
energy consumption connect the
dishwasher to a cold water source.
For fastest possible wash times, with
slightly higher energy consumption,
connect the dishwasher to a hot
water source. All programs use hot
water in the rinse cycles.
-
The inlet hose is approx. 5 ft. (1.5 m)
long. A 5 ft (1.5 m) flexible metal
hose (pressure resistant up to
2030 psi) is available.
-
The water inlet hose comes
equipped with a 3/4" female hose
thread connector. This can be
directly connected to a water supply
with 3/4" MHT (male hose thread
ends).
-
Water pressure: Must be between
4.5 - 145 psi (0.3 - 10 bar).
58
z_Do not cut the intake hose. It
contains electrical wiring. If the hose
is cut, the dishwasher will not work.
There will be a watedeak and you
i
long, coil it neatly and place it
ould be injured. If the hose is too
Plumbing
Drainage
Venting the drainage
-
The machine comes equipped with a
built-in non-return valve on the
If the dishwasher drain hose is
connected to a floor drain or to a drain
discharge side to prevent waste
water from flowing back into the
dishwasher.
pipe that is less than 8" (20 cm) above
the floor, the drain must be vented.
Otherwise the water inside the
dishwasher may siphon out during the
wash program.
-
-
The dishwasher is equipped with a
5 ft (1.5 m) flexible drain hose with an
internal diameter of 7/8" (22 mm).
Drain hose extensions and adapters
can be ordered from Miele.
The maximum drain hose length is
13 ft. (4 m), max. drain height: 39"
system
[] Open the dishwasher door and
remove the lower basket.
[] Pull the lower spray arm firmly
upwards to remove.
(1 m).
-
If the hose is to be directly fitted to
the drainage outlet on site, use the
supplied hose clip.
-
The hose can be installed to the left
or right side.
-
The existing drain pipe for the drain
hose is designed for various hose
diameters. The drain pipe must be
shortened if the drain pipe extends
too far into the drain hose. The drain
hose could get clogged.
-
The drain hose must not be
shortened.
-
Make sure the hose is installed
without kinking, pressure or being
pulled.
[] Cut off the vent cap located at the
right rear of the triple filter system, as
illustrated.
59
When contacting the Technical Service,
please quote the model and serial number
of your appliance.
MieJe, inc.
Miele Limited
National Headquarters
9 Independence Way
Princeton, NJ 08540
Phone: 800-843-7231
609-419-9898
Fax:
609-419-4298
www.miele.com
National Headquarters
55G East Beaver Creek Road
Richmond Hill, ON L4B 1E5
Phone: 800-643-5381
905-707-1171
Fax:
905-707-0177
www.miele.ca
info@miele.ca (general enquiries)
professional@miele.ca (commercial
Technical Service & Support
Nationwide
Phone:800-999-1360
Fax:
888-586=8056
Alterations reserved/0606
G 1470 Vi
G 2470 Vi
enquiries)
Mielecare National Service
Phone:800=565=6435
905-850-7456
Fax:
905-850-6651
service@mieie.ca (Tech. Service)
M.-Nr. 06 696 060 / 01
en = US
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 60 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Thu Apr 05 20:57:33 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools