MJS Technology SPK311 Bluetooth Speaker User Manual IM X MH22 REV1 ARTWORK
MJS Technology (shenzhen) Co., Limited Bluetooth Speaker IM X MH22 REV1 ARTWORK
User Manual
Revision: 1
IM-X-MH22 ifidelity Powerdasher BT Speaker / Powerbank - INSTRUCTION MANUAL
AI ART AND DIE FILEAUG 15 | 03.31.15
page 1 OF 3
© 2015 | 2016 LEEDSWORLD
Proprietary information contained in this drawing is the sole property of Leedsworld. Any reproduction in part or as a whole without the written permission of Leedsworld is prohibited.
BACK SIDE
FRONT SIDE
USER MANUAL - COVER : FRONT & BACK
Model:SPK311
Bluetooth Speaker
Revision: 1
IM-X-MH22 ifidelity Powerdasher BT Speaker / Powerbank - INSTRUCTION MANUAL
AI ART AND DIE FILEAUG 15 | 03.31.15
page 2 OF 3
© 2015 | 2016 LEEDSWORLD
Proprietary information contained in this drawing is the sole property of Leedsworld. Any reproduction in part or as a whole without the written permission of Leedsworld is prohibited.
USER MANUAL - PAGE 3 AND 4 : FRONT & BACK
BACK SIDE
FRONT SIDE
USER MANUAL - PAGE 1 AND 2 : FRONT & BACK
FRONT SIDE
0112
BACK SIDE
6 Hours
3 - 4 Hours
5V/1A, 2600 mAh
Revision: 1
IM-X-MH22 ifidelity Powerdasher BT Speaker / Powerbank - INSTRUCTION MANUAL
AI ART AND DIE FILEAUG 15 | 03.31.15
page 3 OF 3
© 2015 | 2016 LEEDSWORLD
Proprietary information contained in this drawing is the sole property of Leedsworld. Any reproduction in part or as a whole without the written permission of Leedsworld is prohibited.
USER MANUAL - PAGE 5 AND 6 : FRONT & BACK
BACK SIDE
FRONT SIDE
Power/Bluetooth Status Indicator
Play/Pause/Answer Call/Ignore Call
LED Battery Charging Indicator
Micro-USB Power Input
USB Power Output (Backup function)
3.5mm AUX Line-in Port
Press and hold the ON/OFF button
to power on the speaker. The Power/
Bluetooth Status indicator flashes
blue. Double press ON/OFF again to
activate pairing mode and tone will
sound. To play/pause/answer calls,
press the ON/OFF button once. To
ignore an incoming call, press twice.
Plug the included Micro-USB cable - or
appropriate cable from device - into
the power input on personal device.
Plug the USB end of the cable into the
back of the Powerdasher Speaker.