MOBASE ELECTRONICS SEKS-AM08RX Remote Keyless Entry System User Manual

Daedong Co. Ltd. Remote Keyless Entry System

User manual

Title : NO. : SCE-0807 Date : 2008.07.152. PRODUCT SPECIFICATION2.1 Scope of Remote Keyless Entry in BCM system.21.1 Key part : TRANSMITTER is inside of the remote key, and it sends the rolling code to the RECEIVER by radio frequency. 2.1.2 RECEIVER : It receives the rolling code and decodes that, thereafter RECEIVER drives the actuator.2.2 Specification2.2.1 TRANSMITTER2.2.2 RECEIVERBelow than 6mA(in alarm setting condition) Standby Current SpecificationItem DC 9 ~ 16V Operating Voltage DC 12V Rated Supply Voltage Operating Temperature - 30 ~ + 80℃Max Humidity 95% Battery life 2 Year(10Times/Day)(Lithium 3V 1EA) Electric field strength 75.623dBuV/m (315.00MHz) Frequency 315.00MHz Code Rolling Code(Hopping Algorithm)Operating voltage range DC 2.5 ~ 3.2V Operating temperature range -20 ~+60℃ITEM SPECIFICATIONRated supply voltage DC 3V Storage temperature range -30 ~ 80℃ Modulation FSKInformation DocumentInformation Document
Title : NO. : SCE-0807 Date : 2008.07.152.3 Operating summary① TRANSMITTER's button is pushed.② TRANSMITTER sends the code by radio frequency.③ RECEIVER gets the code and decodes it.④ RECEIVER judges the code whether it is right code or not.⑤ RECEIVER checks door lock or unlock or PANIC state.⑥ RECEIVER drives the actuator.⑦ RECEIVER drives the horn2.3.1 LOCK & UNLOCK & PANIC① If LOCK or UNLOCK button is pushed for less than 1 sec, then TRANSMITTER sends the LOCK or UNLOCK DATA.② If PANIC button is pushed for more than 1 sec, then TRANSMITTER sends the PANIC.2.4 Caution① Danger of explosion if battery is incorrectly replaced. ② Replace only with the same or equivalent type recommended by the manufacturer.③ Dispose of used batteries according to the manufacturer's instructions.Page 5 of 11Information DocumentInformation Document
Title : NO. : SCE-0807 Date : 2008.07.152. USER MANUAL2.1 Name : BCM system- This system is BCM and includes RKE.- RKE in BCM system is intended for auto door lock or unlock in vehicle.- This BCM system is to be installed on motor vehicles as *OE item. *OE : Original Equipment. *BCM : Anti Theft Alarm System. * RKE : Remote Keyless Entry.2.2 System construction2.2.1 System in vehicle2.2.1 System for test * Through the use of lamp, operating state is displayed by lamp. lamp 'ON' means that actuator is operated by door lock or unlock output signal. Page 4 of 11Information DocumentInformation DocumentInformation DocumentInformation DocumentANTENRECEIVERBATTERYDOORACTUATORROLLINGANTENNARECEIVERBATTERYDOORACTUATORROLLINGCODEANTENNARECEIVERBATTERY LOCK or UNLOCK or PANICLEDROLLINGCODE
"CAUTION: Exposure to Radio Frequency Radiation. Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possiblility of exceeding the FCC radio frequency exposure limit. The minimum separation distance of 20cm from the antenna to the body of user required."

Navigation menu